Watching you twist and bend insane 18 wheeler trucks is the modern day equivalent of watching Knights wrestling Dragons. Absolutely love your humor and your videos. 😂😊❤
From your comments about the music it sounds like you were caught by the TH-cam police. There's another channel called dirt perfect and they were testing out a new skid stair and the 1st thing he did was reached up and shut that radio off and mentioned something about if you leave that playing in the background that you will have your video demonetized. Good video by the way and you have the best pointer on TH-cam.
I like this! I love to learn about this stuff. Thanks dude. I appreciate your knowledge and your ridiculous humor. Well done bruv! Keep creating content por favor!
i always think of it as the big power 18 wheelers where the front 2 tires are basically not touching, lots of bend and flex to straighten that up after letting off the pedal
Bob is so knowledgable and been around the block for sure. I bet you learn so much workin witg him. Lucky man. Bobs getting a little old and weak , but sharp as a tack.
I was straightening an Autocar mixer that was twisted and diamond. Had the rear motor mount bolts loose on one side and out of the other. Start to put pressure on and wham. Transmission comes crashing into the pit. Didn't see the crack in the engine flywheel housing.
Where you guys out of, friend...Long time Body Shop, Guy here, and Now full time Diesel mechanic, Have my own frame machine for everything up to one tons. Here in New Bern NC
Hey Bendin, where are you located at? I work on trucks for a livin and i'd like to refer people to your business for frame and alignment work. I'm located in Florida.
Watching you twist and bend insane 18 wheeler trucks is the modern day equivalent of watching Knights wrestling Dragons. Absolutely love your humor and your videos. 😂😊❤
I'm going to now picture that when I watch these videos😂
From your comments about the music it sounds like you were caught by the TH-cam police. There's another channel called dirt perfect and they were testing out a new skid stair and the 1st thing he did was reached up and shut that radio off and mentioned something about if you leave that playing in the background that you will have your video demonetized. Good video by the way and you have the best pointer on TH-cam.
That definitely takes a lot of feel.
Half science, half art, half experience.
It looks like a fair amount of experience is required in addition to the alignment rack/tools to be successful. Keep up the good work.
I like this! I love to learn about this stuff. Thanks dude. I appreciate your knowledge and your ridiculous humor. Well done bruv! Keep creating content por favor!
It is impressive how those frames can move that much
And it's not really moving that much when you consider how long of a section that bend is taking place.
Theyre made to be able to withstand the stress of flexing due to engine and driveline torque and heavy loads
i always think of it as the big power 18 wheelers where the front 2 tires are basically not touching, lots of bend and flex to straighten that up after letting off the pedal
i pulled cars all my life.. love watching big boy pulls .
Bob’s the best hand in the business
Bob is so knowledgable and been around the block for sure. I bet you learn so much workin witg him. Lucky man. Bobs getting a little old and weak , but sharp as a tack.
I'd like to spend the day watching this fellow work. I'll bet his thinking is three steps ahead of what is currently taking place.
Hell ya, we missed Bob, great video Devin, keep up the great work.
Love your work.
I figured once the frame is jacked up, they total the dang thing out. Had no idea this was a thing. Pretty damn cool man!
Your a badass at what you do. I love your humor and your skill set
Good that you are able to add a new machine, better that you know what you are doing when operating it.
Good stuff Maynerd !!! 👍🏻👍🏻👍🏻
I'm just a regular old bodyman. Dude I enjoy your videos. That equipment has to be a back breaker haha
Larry Inticer says Send It!!!! Bob say Bend It…
You do the work but Bob makes it look easy.
That’s is a sweet frame rack!
WOW! Your videos never get old!
Skills... 💪🤠 you always need a good friend like this to Help you straiten your Bent Race car chassis back to Factory specs :)
Love your channel man
You know you should sing us a little tune for your background music something about Bob pointing at stuff:)
Nice work! You need to make your videos 5 to 10 minutes and release a few at the same time every week it helps with TH-cam algorithms.
I was straightening an Autocar mixer that was twisted and diamond. Had the rear motor mount bolts loose on one side and out of the other. Start to put pressure on and wham. Transmission comes crashing into the pit. Didn't see the crack in the engine flywheel housing.
The sped up camera really shows what's going on. 👍
That is quite a skill.
Hey Bendon, can you get bob to put some high vis tape on the pins so they are easier to see? thanks
Awesome, its amazing at how these flex. Is there any metal fatigue concerns when flexing these back to original position?
You need to start a store, so we all can have a Bob of our own. LOL
Bob says, "" We bind no, other people bind we straighten ""
You're a chiropractor for semis! 😋
I had one my frame guy said 'Dude, its smoked' frame was kinked and ripped. Ever video a non-fixable one?
At 3:38 I think the words you were looking for is manipulate the frame back to straight.
I love all the people in the comments that don’t realize a LOT of the trucks you see have had frame work.
Nice!
Where you guys out of, friend...Long time Body Shop, Guy here, and Now full time Diesel mechanic, Have my own frame machine for everything up to one tons. Here in New Bern NC
Houston Tx.
What’s the name of the shop
You earn your money 💰.
I came across your channel I used some rams at work I weld stainless steel coal nozzles seen you use that 125 ton you seem really smart
Fascinating. Hydraulics are amazing. Don't know what pressure it will take....but i know what I'm giving it! Ha ha
Where is your shop located I need straight my truck.
Where is your shop located, you do great work
BOB
The finger of God.
Great Vids, Funny guy, Any personal project your working on?
Got that shirt open like he has that hamburger meat hanging out!!! Lol
How they get so bent up?
That steel got the hots for you or does it behave for everyone that well?
Is Bob familiar with KansasJack equipment? 🤔
cool
Where you located?
How much does frame work usually cost for something like this ?
The area looks like bee line in Lexington ky
I need help with my truck. Where can I find his location
They bend them ,,, you mend them 🤣🤣🤣
Hey Bendin, where are you located at? I work on trucks for a livin and i'd like to refer people to your business for frame and alignment work. I'm located in Florida.
Is it a lot on the hub bearing and kingpins
Leave the bending to the drivers
Where are you located? I may have some work to send your way if you're close enough.
Houston
@@bendinwithbendon ahh. I'm 14 hours away unfortunately. Nice work though!
Awesome editing even. Wow. Where do you find the time??
Where is your shop ?
I got to get me one of them foam fingers for my videos, 🤣🤣🤣🤣😂😂👍👍✋✋ the finger gets a subscribe from me ✋✋✋✋✋✋
Where do u measure for ur gauges. Your a funny dude. Love learning when its fun. Thanks
"Customer states he was in an accident." Customer is pretty wordy. :)
Also, this was a minor accident and the frame was pushed over 4+ inches?!?
Wait a minute...is this Bendin with Bendon? ?!? Or Straightening with Bendon?! 🤔🧐😳😆😂
What area are you in?
crazy
Hell yea I’m first
The finger does it all😂🤘😎
Guys work on gooseneck trailer?
Bendon with bendin says he dont bend, imagine that???