I have got to get this for my 2015 Toyota Corolla. I had many mufflers on car so far but that sounds amazing like exotic sound to it almost. Great video man
I got one with a few days ago and I'm going to the exhaust shop today to have it installed in the morning. The one I got was the evil energy blue burnt muffler 2 inch inlet 3 inch outlet. It's very similar to the muffler you have.
I know it’s it’s been time for your cómeme t. But how is the muffler sound on the car . I have the same exact car but it’s automatic. Automatic gets hate and I have been told to not to instal a muffler
Just ordered one for my 98 escort wagon, told myself i wouldn't do a muffler until the manual swap is done, nothing worse than hearing an auto shift through a loud exhaust LOL your car sounds mean i cant wait to see what it sounds like when it comes in
You think it’ll sound louder if you added another pipe and exhaust tip on the other side? I’m looking to get this setup but I love this setup I wanted to do a dual tip on both sides of my car but now I wanna do 2 big exhaust tips
You get what you pay for it works great I went to a shop and had the small version of it and installed on my Honda Accord EX. Just because I wanted to sound like I had more than I do you know custom exhaust cold air intake. Give it about a month and it'll break in it'll the sound a lot deeper almost like you got a bigger engine especially when you go full throttle you can feel a difference when your engine breathes a lot better. Remember just give it about a month and it won't sound like a tin can. 😀
I also would like to know how it sounds. If anything I am about to install this on my v8 jeep, I think I will video the tig welding of the stainless and install and try to find time to post it along with my other videos I need to post of my build.
I have one on my camry and its pretty good sounding for what i paid for it. Though eventually im gonna fab up a stainless system with a skunk 2 muffler.
I just ordered mine today waiting to put on honda accord ex 1999 hope fully it sounds good the looks of it its dope certified thanks for the video gotta say and the link
How did you determine the dimensions and cut angle and number of pieces for each bend? Do you use a rule of thumb or is there mathematical methodology?
I try to keep everything when building exhausts in 45° increments for simplicity when working in bend areas. For example either a 45 or 90° bend to achieve my angle. Modifying a bit if needed. But a lot of it just comes from experience, the more exhaust work you do the easier it becomes to “visualize” the path
@ChrisSadowski , Did you remove the resonator and put the muffler on? or is it catalytic, then resonator , then the muffler? If you could reply please thanks!
@@ChrisSadowski Dope ok, I put this on my 2000 Honda Civic Coupe, but yours sounds a little better I think or did. I might have to remove the resonator and it should burble / crackle little more. Thanks for responding! I just don’t know if removing resonators fail smogs…
This man do amazing Job especially at fabricating and being creative.... too bad he in AZ otherwise I'd come to him to get work done. Thanks for Sharing the vids u make.
I have a question.. never put a new muffler on my car before, I just want to change mine to give the car a little umph but not to wake up the whole neighborhood… just make it sound nice on the road and stuff. Can I just get a muffler and just install it in my car or do I need to get a new exhaust as well..
@@ChrisSadowski hey man, I've got a Ford figo which is pretty much the same as a fiesta mk6/St 150 The diameter of the exhaust is 47mm But since I'm not too much into performance I left the stock branches, stock cat and stock Restonator Im upgrade my muffler to a 50mm stainless steel freeflow Im just doing it for the sound so I can get a nice deep and roar tone Would you recommend that my option for just upgrading the Muffler to a 50mm is safe?? also considering back pressure and also considering that the diameter is small which is why I'm going for the 50mm freeflow muffler stainless steel
@@ChrisSadowski so my system is stock from manufacture only mod Im planning to do is just upgrading my muffler to a 50mm Its my first ever mod, but for a f
Good day bro, just wanna ask is it better to not have a catalytic converter, and just go straight ahead with a chambered muffler. My Mazda has a b5 1.5L dohc engine. Please give me some advice on how I can make my exhause sound better than scuv mufflers...
I prefer a high flow cat over no cat, unless your turbo then having no cat will increase flow but make sure your safe to run no cat in your area for inspection purposes.
Don’t know if you could help me out but can i install this on a 2018 honda civic hatchback lx ?I would need to buy two of them right?because have dual muffler.what the set up should i do.thanks for your help
Hello, I have a 1.2 skoda fabia and I'm wanting to make it a bit louder. Do you think this would be a good idea. I have no modifications to the exhaust, I will just be putting this on after I chop the back box. Whats your opinion just to have a little bit of advice. Cheers 😀
Will this sound pretty good on my Miata. Exhaust is completely stock. So if I put it on would it sound good with everything else behind it being stock. And would it be loudish?
is this muffler too loud? im looking at putting one on my ford escape ecoboost, i want a lower not that sounds good when you get on it, but i dont want to annoy the neighbors would this be what im looking for?
@@ChrisSadowski I know I am asking many questions, but I am looking for that same sound in my car, is the resonator of some brand or specification? THANKKSSS
Oh I see. I checked their website out and right in the description, they clearly mention that this specific muffler is only suitable for vehicles with straight exit mufflers set up. For example, my 11th gen civic touring has offset mufflers. If I put this one, I dont want it to impact the car's performance and the way it drives. What do you think?@@ChrisSadowski
I can’t recall if the 11th gen is like the 10th gen where it has the 3 tips in the middle of the bumper. But either way it’s a single exhaust till the end where it splits.. It won’t effect performance in the slightest, just the sound slightly. Your turbo, cat, and two resonators will keep the car very quiet so you will only get a slight audible change.
Can this be installed on the Toyota Prius V? I just want to make my car sound a little loud I know someone who had one installed on their 2nd gen prius but I'm just curious if I can do it on my 3rd gen. Because I heard something about the 3rd gen prius having coolant by the exhaust system so i'm afraid if I were to install an exhaust it might mess some things up.
@@ChrisSadowski Ok I heard it's universal should I be fine with the 2" inlet 3" outlet that's on Amazon or is there a way I can know which one fits mines?
I had put long tube header's straght pipe and in one 2.5exhaust and a N1on my Hyundai elantra v6 3.8 I think with and colder intake befor I did all that my car dident even go past 85 aft e r I was done with it I got it up to 120 fun car and very loud my nabors did not like the morning star ups souned like a air plane
What else do you have in your exhaust setup? I just got my Miata last week and the guy had just straight pipe to the stock muffler and it sounds like ass lol.
I bought one and it sounds amazing from the outside of my 2023 Kia k5 gt line I mean sexy. But the inside cab noise is deafening and a constant headache!!!!
@@P̈̇̃H no, just the stock muffler and pushed this exact one down further under my car centered with the rear axle “under” . I have however found the solution which is a j pipe! What I’m experiencing is something called drone noise in the cab of my car
My integra db1 got wrecked drunk driver t boned me so I'm starting an fg3 project since you have welding knowledge I'm getting a spelab muffler for the 2015 civic coupe lx fg3. Bro I would really appreciate it if you know by chance the exhaust size looked every where but different answers. So don't if I go with the 2.0 3in outlet or the 2.5 4in exhaust. If any one else know I would be grateful
I have no idea. My welding knowledge does not include pipe diameter memory for every car out there lol. If you already have the car then just go outside and measure the piping
One of the finest exhaust sounds I've ever heard on TH-cam. Awesome work brother!
That things sounds amazing. Your fabrication work and welding is getting great. Keep it up Chris 👊🤟
0
Ok
Also, the muffler didn't have a raspy pitch at higher RPMs! Sounds great!
For a sub $100 muffler and a custom setup, that actually sounds great.
Where did they buy it ?
@@geovanicampbell3425 eBay.
Okay thanks
Wow it sounds super good for 100$! I am going to look in to this and mby buy one for the summer
That’s a clean Muffler for the Miata
I have got to get this for my 2015 Toyota Corolla. I had many mufflers on car so far but that sounds amazing like exotic sound to it almost. Great video man
Did you get how does it sound. Have a 2.0 Corolla HB
How did it sound? Thinking about getting one for my 2010 corolla
Got one for my 2019 Corolla it sounds amazing
I got one with a few days ago and I'm going to the exhaust shop today to have it installed in the morning. The one I got was the evil energy blue burnt muffler 2 inch inlet 3 inch outlet. It's very similar to the muffler you have.
I know it’s it’s been time for your cómeme t. But how is the muffler sound on the car . I have the same exact car but it’s automatic. Automatic gets hate and I have been told to not to instal a muffler
Your growth is amazing brother keep up the good work.
Yeah that muffler sounds great it also looks way way better
Great work Chris sounds awesome. May have to get 2 of these for my 3000GT exhaust I’m building.
Do you have the VR4 model
Just ordered one for my 98 escort wagon, told myself i wouldn't do a muffler until the manual swap is done, nothing worse than hearing an auto shift through a loud exhaust LOL your car sounds mean i cant wait to see what it sounds like when it comes in
You think it’ll sound louder if you added another pipe and exhaust tip on the other side? I’m looking to get this setup but I love this setup I wanted to do a dual tip on both sides of my car but now I wanna do 2 big exhaust tips
In the case of a Miata a dual tip wouldn’t make it any louder I do not think
You get what you pay for it works great I went to a shop and had the small version of it and installed on my Honda Accord EX.
Just because I wanted to sound like I had more than I do you know custom exhaust cold air intake.
Give it about a month and it'll break in it'll the sound a lot deeper almost like you got a bigger engine especially when you go full throttle you can feel a difference when your engine breathes a lot better.
Remember just give it about a month and it won't sound like a tin can. 😀
would I need 2 of these for my gs 350
I don't want to sound like i have more then i have. For me its hearing what is there clearly.
@@senorbonbon check under the car, if is dual exhaust is highly likely. Although there are some systems that share one muffler.
I bought a set of these for my hemi magnum sounds pretty good on a four banger I’m sure it’s gonna sound good with a V8 hemi. Thanks for the vid
How does it sound?
I also would like to know how it sounds.
If anything I am about to install this on my v8 jeep, I think I will video the tig welding of the stainless and install and try to find time to post it along with my other videos I need to post of my build.
Awesome Upgrade, definitely gonna subscribe and watch more of your builds buddy👍👊👊... Thanks again for the input
I bought one for my honda crv. Waiting to have a shop mount it. I'm excited. Thanks Spelab
I was thinking about getting it for mine lol how is it?
Good job man, sounds good! Hella good!
Saw the overcrook in the beginning and new I had to subscribe. I love my skateboard and I love my car
Ayy thanks dude!
Just ordered this thanks for the video!
Ordered one for the Acura Cl 2.2 because of this review thanks!
I love that sound from your muffler.
I'm putting one on my Subaru legacy wagon 2.5 n/a soon to be eg33, 3.3l.
Thanks.
Great video bro you just talked me to putting one on my Miata thing sounds awesome. 😎🤙
my 97 del sol sounds so amazing. thank you
I'm going to try dual exit on my 07 TL type S
That's sound so damn clean
Definitely didn't expect it to sound so good! Nice work
🤘🏼🤙🏼
Vibrant and magna flow have muffler under 100 I’ve heard good
Both companies are great.
Sounds good bro! I wish I had your fab skills! 🔥
I wish I had better fab skills lol
6:13
*_Anyone else notice the lizard came to watch? 😂_*
I have one on my camry and its pretty good sounding for what i paid for it. Though eventually im gonna fab up a stainless system with a skunk 2 muffler.
You have the link for the muffler?
Never mind I found it!
I just ordered mine today waiting to put on honda accord ex 1999 hope fully it sounds good the looks of it its dope certified thanks for the video gotta say and the link
Mine rattles when I turn the car on and off :( it's a cheap eBay catback exhaust that came with the car but sounds awful
I’d say it’s broken inside the muffler
N1 on my integra way back sounded great. Now have a k series with custom 3"
How did you determine the dimensions and cut angle and number of pieces for each bend? Do you use a rule of thumb or is there mathematical methodology?
I try to keep everything when building exhausts in 45° increments for simplicity when working in bend areas. For example either a 45 or 90° bend to achieve my angle. Modifying a bit if needed. But a lot of it just comes from experience, the more exhaust work you do the easier it becomes to “visualize” the path
I've got a 2005 Mazda 3/Axela with a 1.5L ZY-VE engine in it. Any recommendations for an exhaust that wont sound too ricey but will turn heads?
Any custom build exhaust, I usually use high flow cat, vibrant ultra quiet resonator and any sort of muffler you want.
@@ChrisSadowski I dont have the money for a full exaust system so was just looking to get a muffler that will help it out
Love the del sol In the back
It's not loud enough, but I like how the sound is clean without the Raspy sound most 4 bangers make.
It will definitely be louder on a naturally aspirated car. The turbo muffled a lot
Do you have the link for the muffler you just put on ?
thanks for the video, gunna put this onto my catless impreza to hopefully quiet it down a little! Cheers!
Is your resonator deleted before you install that new muffler?
Yes, I had just straight pipe from my turbo back to the muffler
This reminds me of the Greddy Revolution RS muffler, but for $100 cheaper.
Might have to get this for my XSE Corolla.
I’ve got that exhaust on my Z and I was thinking the same.
Live this kind of videos ...
@ChrisSadowski , Did you remove the resonator and put the muffler on? or is it catalytic, then resonator , then the muffler? If you could reply please thanks!
Turbo, straight pipe to muffler if I recall, sold the car a couple years ago now so I don’t fully remember
@@ChrisSadowski Dope ok, I put this on my 2000 Honda Civic Coupe, but yours sounds a little better I think or did. I might have to remove the resonator and it should burble / crackle little more. Thanks for responding! I just don’t know if removing resonators fail smogs…
don't remove the resonator, on a single cam civic, or even a b series it will sound raspy and trashy
@@ChrisSadowski ahh ok thank you for letting me know, saved me some time
This man do amazing Job especially at fabricating and being creative.... too bad he in AZ otherwise I'd come to him to get work done. Thanks for Sharing the vids u make.
Much thanks for the positivity
I have a question.. never put a new muffler on my car before, I just want to change mine to give the car a little umph but not to wake up the whole neighborhood… just make it sound nice on the road and stuff. Can I just get a muffler and just install it in my car or do I need to get a new exhaust as well..
You can just put a muffler on. You’ll will need to take it to somebody to be welded on
Should I put this on my straight pipe or do I need a muffler??
This is a muffler, but you should have a resonator on your exhaust somewhere to reduce rasp
Yeah it definitely made a difference good review 👍
Did you upgrade the Muffler with the stock branches and stock cat still in?
Aftermarket headers and custom exhaust
@@ChrisSadowski hey man, I've got a Ford figo which is pretty much the same as a fiesta mk6/St 150
The diameter of the exhaust is 47mm
But since I'm not too much into performance I left the stock branches, stock cat and stock Restonator
Im upgrade my muffler to a 50mm stainless steel freeflow
Im just doing it for the sound so I can get a nice deep and roar tone
Would you recommend that my option for just upgrading the Muffler to a 50mm is safe??
also considering back pressure and also considering that the diameter is small which is why I'm going for the 50mm freeflow muffler stainless steel
@@ChrisSadowski so my system is stock from manufacture only mod Im planning to do is just upgrading my muffler to a 50mm
Its my first ever mod, but for a f
That size muffler will be fine
@@ChrisSadowski thank you Chris, my Exhaust specialist and the my Ford group peers also guaranteed me that it will be fine👍👍👍
Good day bro, just wanna ask is it better to not have a catalytic converter, and just go straight ahead with a chambered muffler.
My Mazda has a b5 1.5L dohc engine. Please give me some advice on how I can make my exhause sound better than scuv mufflers...
I prefer a high flow cat over no cat, unless your turbo then having no cat will increase flow but make sure your safe to run no cat in your area for inspection purposes.
@@ChrisSadowski thanks for the ad ice Chris, I see now and I guess I'll get it straight without cat for a more full flow and better sound.
Don’t know if you could help me out but can i install this on a 2018 honda civic hatchback lx ?I would need to buy two of them right?because have dual muffler.what the set up should i do.thanks for your help
Great Job Chris!
Thanks man!
I got this but is there a way to take out that silencing material inside
The sound packing? No
@@ChrisSadowski oh
I tried looking for this exhaust and can’t find it on their website ☹️
I like the sound of it it sounds nice
Just ordered mine for my 19 hrv sport
Does it sound good?
@@yvngpierre1063 hell yeah man. Loud with a deep tone
@@Andyzilc damn that’s good. I have a Corolla HB 2.0. Should have a nice deep tone to it. Would look big as hell tho lol
I just bought that last night will it sound good to my mazda 3 2.0?
Do you think that sounds good on a 1 1/2 inch pipe?
Shiiiiiii couldn’t have asked for nothing better sounding for the money spent. 🤟🏼
That’s what I’m sayin 😎
what is the name of that type of muffler to be able to buy it
Sound nice n1 sound deep my brother have one on his ek coupe
Hey bro do you still have that old muffler you took off? I’d be down to buy it
This was like 3 years ago lol. I don’t
What muffler you recommend for a v6 ?
Did it need to take the muffler to install the tip?
I wonder if it'll be good for my 2G Eclipse 😮
Damn that does sound good !!!! I may have to just get me one... I was really hoping for a clutch kick or 7 lol
My clutch can’t handle that now. It’s already starting to slip 🤒
@@ChrisSadowski damn it sir !!!!
You think I’d fit a Mazda6 04?
Amazing, good job brother 👏
Do you know how much noise it produces? I'm in Cali and it's a strict 95 decibel limit for public roads
Noise is gonna vary based off of what the rest of your exhaust setup is like.
@@ChrisSadowski well I have a 2008 scion tc and I'm pretty sure it's just stock
No idea then. I’d assume it’d be super quite with a stock cat
The amazon exhaust sounds great! 🤝🤝
Do you think it will fit a 2002 toyota celica gt?
just got a 2008 infinity G35XS thinking of getting two of these
Great sound, is this muffler available in a smaller circumfrence exhaust ?
Not that I know of
Ordered one for my e46 bc im tired of a straight pipe with no cats
how is it?
do you think it would sound good on a 2015 camry 4 banger?
Do you think this would sound good on a 2008 Mitsubishi Eclipse?
Bro, Im on the other side of town (goodyear)lol. Looks like I have to drive through AJ more often.
That sounds so good
What kind of turbo u got bro ? I wonder if I can put that one on a Scion tC
I don’t have the car anymore, but It had a Maxpeedingrods GT2860 when I sold it
Hello, I have a 1.2 skoda fabia and I'm wanting to make it a bit louder. Do you think this would be a good idea. I have no modifications to the exhaust, I will just be putting this on after I chop the back box. Whats your opinion just to have a little bit of advice. Cheers 😀
This would make it a bit louder yes, simple and effective option
@@ChrisSadowski Thanks for your reply! Is there any possible way I could make it even louder without it sounding like a can 😄
You could swap out your catalytic converters for a test pipe, or a smaller inline muffler/resonator to help with the rasp
Will this sound pretty good on my Miata. Exhaust is completely stock. So if I put it on would it sound good with everything else behind it being stock. And would it be loudish?
It should sound pretty good, and if you have the stock car it will open it up a bit but it won’t be super duper loud I don’t think
is this muffler too loud? im looking at putting one on my ford escape ecoboost, i want a lower not that sounds good when you get on it, but i dont want to annoy the neighbors would this be what im looking for?
It’s entirely depending on your exhaust setup.
Can I put it on my Mazda 3?
Im getting one for my tdi
Hello I have some questions for you, is the exhaust pipe direct from the engine? with nothing in between? and this exhaust is Direct Flow?
Straight pipe off the turbo with an resonator and the muffler
@@ChrisSadowski I know I am asking many questions, but I am looking for that same sound in my car, is the resonator of some brand or specification? THANKKSSS
Is that sound just the muffler or do I have to straight pipe it too?
Lots of things will change the sound. Pipe size, pipe material, cats, resonators, etc
@@ChrisSadowski thank you for telling me. I have a Honda Accord 06 sedan 2.4. And I want this muffler
Can this be compatible for an 11th gen civic sedan touring? NOT the SI
You gotta weld it on so it will technically fit anything
Oh I see. I checked their website out and right in the description, they clearly mention that this specific muffler is only suitable for vehicles with straight exit mufflers set up. For example, my 11th gen civic touring has offset mufflers. If I put this one, I dont want it to impact the car's performance and the way it drives. What do you think?@@ChrisSadowski
I can’t recall if the 11th gen is like the 10th gen where it has the 3 tips in the middle of the bumper. But either way it’s a single exhaust till the end where it splits.. It won’t effect performance in the slightest, just the sound slightly. Your turbo, cat, and two resonators will keep the car very quiet so you will only get a slight audible change.
Can you get pulled over for not having the silencer?
Find out eh
Looking at getting the for my 2019 Nissan Altima. Do you think it would make it deeper?
Can this be installed on the Toyota Prius V? I just want to make my car sound a little loud I know someone who had one installed on their 2nd gen prius but I'm just curious if I can do it on my 3rd gen. Because I heard something about the 3rd gen prius having coolant by the exhaust system so i'm afraid if I were to install an exhaust it might mess some things up.
It’s just a muffler. You can literally put it on your groundhog if you got a welder
@@ChrisSadowski Ok I heard it's universal should I be fine with the 2" inlet 3" outlet that's on Amazon or is there a way I can know which one fits mines?
They won’t be able to tell you. Just get down under your car, and measure your piping where you want the muffler to go
@@ChrisSadowski Ok appreciate it
I had put long tube header's straght pipe and in one 2.5exhaust and a N1on my Hyundai elantra v6 3.8 I think with and colder intake befor I did all that my car dident even go past 85 aft e r I was done with it I got it up to 120 fun car and very loud my nabors did not like the morning star ups souned like a air plane
What else do you have in your exhaust setup? I just got my Miata last week and the guy had just straight pipe to the stock muffler and it sounds like ass lol.
My miata was turbo, straight pipe to a total flow inline muffler, and then straight to this muffler in the video
Sounds great! I want to buy it, but I’m scared it will sound too quiet with only having a muffler delete currently, what do you think?
I bought one and it sounds amazing from the outside of my 2023 Kia k5 gt line I mean sexy. But the inside cab noise is deafening and a constant headache!!!!
@@matthewsullivan31 did you remove anything else besides the muffler?
@@P̈̇̃H no, just the stock muffler and pushed this exact one down further under my car centered with the rear axle “under” . I have however found the solution which is a j pipe! What I’m experiencing is something called drone noise in the cab of my car
Look into have a local fabricator make you a heimholts resonator to get rid of or at least reduce the drone
Can i put this on any car? I have an 03 acura tl, if not, please explain why
You can put any muffler on any vehicle ever in the history of cars. Idk why this question is asked so much. Literally just weld it on lol
@@ChrisSadowski ok sick thanks bro
Damn Bro sounds good!!! my search is over!!!!!🙂🙂👍👊👊
I want to get one for my Mitsubishi
The link is in the video description
My integra db1 got wrecked drunk driver t boned me so I'm starting an fg3 project since you have welding knowledge I'm getting a spelab muffler for the 2015 civic coupe lx fg3. Bro I would really appreciate it if you know by chance the exhaust size looked every where but different answers. So don't if I go with the 2.0 3in outlet or the 2.5 4in exhaust. If any one else know I would be grateful
I have no idea. My welding knowledge does not include pipe diameter memory for every car out there lol. If you already have the car then just go outside and measure the piping
I want to remove my back muffler and put on an exhaust just like this. U guys think it would sound good on my bmw 325xi?
What would you recommend for a 94 Honda Accord EX? Cause I can’t find anything 😭
This should sound nice on it
@@ChrisSadowski I’ll def order it someday soon and try it out thanks man
I wanna cut my stock mufflers off and replace with a not raspy not too loud muffler but not touch resonator
A PLM turndown muffler is what I just installed on my S2000, very deep aggressive tone
thats crazy cuase it now looks like a straight pipe