So sad their are not more young people like you . You are to be commended for your imagination on making the patches . your skills will only improve . Thank you for sharing and good luck.
patches look nice. this job will get faster as you go... good job thanks for sharing you might consider using Raptor bed liner inside and underneath ... I'm going to On mine
I love using raptor liner, I was going to use that but with carpet going over top of it I wasn't too worried about the top being really tough, I plan on doing that to the underside
Bought an 86 live in buffalo and basically same thing I'm in. Need info on parts. Pans corners rockers ECT. Would really appreciate any info on places to start. Absolutely love yours.
well thats what the gmc jimmy and chevy blazer in the square body 73-87 have in common with the broncos lol the rust and rot in the lower A Pillars, B Pillar and back hump behind the seats due to the rear fiber glass removable tops lol
great work! curious on the welder details- do you use 0.030 wire, or 0.025 wire? and where do you like to ground your welder to? seems like it's a quality welder and I unfortunatelyhave a cheap Harbor Freight MIG
A friend called me to help him with some patch panels on his 84 f150 that began with a 75 percent rocker and floor delete cab corners and inner fenders fortunately I knew where there was another one with an extended cab which worked out well it had new inner fenders and the box was already a short bed on the long frame 6 bolts front n rear and zero welding swopped the cab out and save him better than 6 grand in the long haul.but seriously the cab only had about 26 to 30 inches of metal over the frame rails.
Thanks for sharing. I just picked up a 95 bronco with some of that side rust. it's nice to see how you fixed it. Is the rust in Ohio due to using salt on the roads? We have rust issues in Juneau AK due to the ocean.
Man I know absolutely nothing about welding except in vocational school we took the little piece of copper and welded it to the steel what is this style Meg weld and can you use a little handheld portable welder ? If not bondo and sheet metal screws it is for me then lol u make this look easy
I'm using a Lincoln Mig welder here, mig welding is probably the easiest style of welding to learn and is super useful for all types of different work. I would definately take the chance to learn a little about it if possible!
Good thing Ohio doesn't care what you put on the road. If it starts and runs, you can drive it in Ohio without fear of being stopped. You may fall through the floor, but hey that's what plywood is for, covering those holes.
So sad their are not more young people like you . You are to be commended for your imagination on making the patches . your skills will only improve . Thank you for sharing and good luck.
Thanks so much!! 🙏
crazy timing! i just came in from welding my floor its a nightmare just like yours man but with some time and patience she'll be mint! great vid
Haha that's too funny, definitely worth the long haul doing it right, appreciate it!
Man, that garage looks familiar. Almost like i’ve been in there!
Then you should come work on it and help me get this thing done!!🤣
NICELY DONE 👍👍
I just finished body and paited my bronco we had the same rust it's crazy
patches look nice. this job will get faster as you go... good job thanks for sharing
you might consider using Raptor bed liner inside and underneath ... I'm going to On mine
I love using raptor liner, I was going to use that but with carpet going over top of it I wasn't too worried about the top being really tough, I plan on doing that to the underside
Bought an 86 live in buffalo and basically same thing I'm in. Need info on parts. Pans corners rockers ECT. Would really appreciate any info on places to start. Absolutely love yours.
Nice work!
Thank you!
well thats what the gmc jimmy and chevy blazer in the square body 73-87 have in common with the broncos lol the rust and rot in the lower A Pillars, B Pillar and back hump behind the seats due to the rear fiber glass removable tops lol
Yep gotta love it!👎
great work! curious on the welder details- do you use 0.030 wire, or 0.025 wire? and where do you like to ground your welder to? seems like it's a quality welder and I unfortunatelyhave a cheap Harbor Freight MIG
A friend called me to help him with some patch panels on his 84 f150 that began with a 75 percent rocker and floor delete cab corners and inner fenders fortunately I knew where there was another one with an extended cab which worked out well it had new inner fenders and the box was already a short bed on the long frame 6 bolts front n rear and zero welding swopped the cab out and save him better than 6 grand in the long haul.but seriously the cab only had about 26 to 30 inches of metal over the frame rails.
Holy crap thats nuts! At least you were able to use a donor truck to save some hassle, definitely not fun doing all those repairs. Very tedious work
@@JustinsCustoms76 yeah and the donor truck was one of those get it out of here and it's yours jobs so we both made out great.
Thanks for sharing. I just picked up a 95 bronco with some of that side rust. it's nice to see how you fixed it. Is the rust in Ohio due to using salt on the roads? We have rust issues in Juneau AK due to the ocean.
Absolutely, Ohio uses a ton of salt on the roads here and it just eats away vehicles thats the main cause
What years are parts inter changeable with an 86. And can you use f150 or 250 parts on broncos.
Just moved to Ohio a little over a year ago. My truck is already a rust bucket.
@@Mister_Derek these salty roads are every vehicle’s nightmare
Man I know absolutely nothing about welding except in vocational school we took the little piece of copper and welded it to the steel what is this style Meg weld and can you use a little handheld portable welder ? If not bondo and sheet metal screws it is for me then lol u make this look easy
I'm using a Lincoln Mig welder here, mig welding is probably the easiest style of welding to learn and is super useful for all types of different work. I would definately take the chance to learn a little about it if possible!
I’m in Cleveland do you still have the bronco?
Sure do
Good thing Ohio doesn't care what you put on the road. If it starts and runs, you can drive it in Ohio without fear of being stopped. You may fall through the floor, but hey that's what plywood is for, covering those holes.
Haha sad but true!
Poco a poco se avansa
What part of Ohio you in
Northeast, Rootstown to be exact
@@JustinsCustoms76 your a hour from me what would you charge to weld in one wheel well arch on. A 92 bronco lol driver side
@@rontuchek2126 oh wow thats too funny, probably around $100 but idk when I'll be able to do it been pretty busy here recently
@@JustinsCustoms76 ok you got a butter way to contact you lol
@@rontuchek2126 you can get email me @justin.hager76@gmail.com or on Instagram @jhager76