Do I need a Van to start working as a Locksmith? | This is my vehicle setup as a locksmith.
ฝัง
- เผยแพร่เมื่อ 8 มี.ค. 2023
- This is a short video of my vehicle setup, this is how I feel comfortable with my stuff, each company has their own setup or how they feel comfortable with it.
Here are some link if you looking to buy some of the l things I have and the Autel Programmer.
amzn.to/3l3Xbl8 Vantrue S1 4K Dual Dash Cam Built in GPS, Front and Rear Dual 1080P Dash Camera with 24 Hours Parking Mode.
amzn.to/3l4oziM SanDisk 128GB Ultra MicroSDXC UHS-I Memory Card with Adapter
amzn.to/3YvX9Ah back pack I use for my programmer.
amzn.to/3mK4Tl2 another small back pack that can be useful.
amzn.to/3T64bu9 this is where I keep my small battery tester or my machine for cloning stuff.
amzn.to/424sGfI this is the one I use for my try metal keys.
amzn.to/3LaY0Di the snow kit, good for emergency.
amzn.to/3Tjx3Q5 the winter hat.
amzn.to/3l5qFz5 the globes
amzn.to/3yof4hE my soldering machine that comes with the heat blower to do eeprom works.
amzn.to/3mIWXAc 5X Magnifying Glass with Light and Stand, KIRKAS 2-in-1.
amzn.to/3YQEHTb Autel MaxiIM IM608 PRO: 2023 Top Car IMMO & Key Fob Programming Tool, [2-Year Free Update, Value $1790], Newest XP400 PRO, APB112, GBOX2, Advanced ECU Coding, Bidirectional Active Test, 38+ Services
amzn.to/3T852ur Autel IM608 Pro Key Programmer with $1316 Tool Kit, 2 Years Free Update, 2022 Upgraded of IM608/IM508, [with XP400Pro, IMKPA Kit, G-BOX2 & APB112], ECU Coding, Bi-Directional Scanner with 36 Services - บันเทิง
![[ไฮไลต์] แบดมินตันหญิง ไท่ ซือ หยิง vs เมย์ รัชนก อินทนนท์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/LUCG0H5qkpQ/mqdefault.jpg)
I had a Yaris for awhile set up for auction yards and dealer lots. I did a full custom build in mine tho.
You really need to ditch the back seats, make a flat base, bolt stuff down to that flat base and add a safety cage. Even a tiny accident your going to have a rough time. All that stuff is going to fly up and hit your head. I did pull out shelves built on heavy duty rollers with my key machines bolted on them and aluminum shelves that had keys stored in Plano boxes Everything bolted down and had permanent spots. It was set up in away that made everything more like a small office outside the back of car rather then bending over working inside the hatch.
Yeah you right, safety first for sure, on mine still working on those little setups
Awesome setup love it. I’m an auto locksmith in Australia and keep it small as well
Thanks
If it works for you that's what counts...I assume you're just doing automotives...and maybe house lockouts...great job!
Very nice car wrap, I really like it! I used to have that lishi case but I found they always fell out.
thanks, yeah some of the lishi gets loose but the box still keeps it safe.
Nice video 🍺
Thanks
Am thinking of doing it as well… change of career…
Awesome. I’m curious. What was the total cost of this set-up? ❤
I’m also curious where are you trained?
Great video. How do you power up your machines when cutting the keys?
The machine it’s battery powered
@@carsnkeysautomotivewish all of them were . I don’t do to many out calls but I do get some here and there . I have the condor machine and doesn’t come with a battery but there is one available for purchase.
Does your booster provide direct current? Or short term? Because my booster provide current only for 15 seconds and than it turn off. And i need to push turn on button again.
So, i need to find booster, which give current for long time (for key programming).
Yes, this maintain the battery charge as long as it has charge. If the car battery its dead, this booster keeps the charge on 12v until the booster dies!. It has worked for me so i keep using it
How can I learn to be an automobile locksmith in order to start my own business
Well, you don’t need that much everything is learned in the field. If you interested pm or email. Carsnkeysauto.com
Which vehicle is that, please?
An Audi A3, used to be my personal vehicle
@@carsnkeysautomotive Ah. Thank you for the reply!
Do you know where I can get training to be a auto locksmith?
There is so many out there but the one that I went to its on Ogden Utah by Key Man Locks. training just teaches you the basic and everything else you learn in the field, the only stuff you need to learn is what kind of chip id numbers that vehicle takes, the tools you need and everything else is a learning process. if you do some research I think you can even learn everything online. thats my personal opinion, the tools that they recommend is a lot but you can buy one that does almost all the vehicles and jobs. here is my email carsnkeys22@gmail.com for more info for locksmith.
@@carsnkeysautomotivewas the training course worth it?
@@MikeMike-yu1lc well, in training you will learn the basics and whats a transponder key and whats the difference between each of them, what programer you should buy and all kind of blades in the market but everything else you learn in the field! If you don’t have any knowledge about locksmith or programming I would recommend for sure and plus the certificate too, some state requires when applying for license or when applying to buy keys to a supplier!
@carsnkeysautomotive they say after traing you'll be able to start your own business. Did they show you how to pick different locks and everything? Was it alot of hands on or book work?
@@MikeMike-yu1lc about opening a business its up to you, if you willing to take the risk! It does feels like after training you ready to open a business but thats just like a small portion of it or 10% of owning a business. Yes, they show how to pick and lishi the locks, and about picking a lock its just about practice! They give you the list of what you will need to start doing jobs, but most of the time they give you the list but my recommendation always its to do your own research about what programers and tools, when I started mine i bought some things that they did recommend but im not using them, or keys that I bought that I won’t use them.