timestamps 0:05 - 0:51 Introduction and explaining how the monitor arm benefits you and your setup 2:36 shows how the arm clamps to the desk in the instructions 3:25 -4:02 explains how the arm attaches to the screen and how the arm is held up The rest of the installation tutorial is great but I don't need that right now because I'm just trying to explain to my parents what a monitor arm is 13:05 see how much more space there is on the desk area vs the stand that comes with the screen? See how easy it is to organize cables, and plug them into the screen.. 14:27 using the monitor on the computer. looks more comfortable vs straining the neck to look down
Eagle eyes my friend! It’s actually down, but the way the C30 works it has a bolt in the middle that prevents it from being totally flush. I think I’ll do a review update soon.
This is the perfect video really. - on point color grading - great low and slow voice - set-up tutorial. Needless to say, I bought it and am loving the taller height and increased desk space.
The smile on his face when he finished wanted to make me cry tears of joy this is the best review I ever watched I had to drop a sub have a great rest of your life 😁❤️
Hi , it would be cool to see more of a full range of motion test. Also review after a half year or some time would be cool. Like if it doesnt breake or if the gass spring don't breake. Cool material, but you can do second review now to maybe let people know about those two things, because i was particurairly looking for that. Also if the screw dont get loose in a place where you mount it to the desk. This are technicall details which you can know only after you get equipment like that. So i would definiatelly apprecaite seeing those in a video :) and im looking forward to video about that ;)
The easier way to clamp the arm on your desk was perhaps joining the two clamp part (with the two small screws) prior to fixing it on your desk. Thereafter, taking the entire assembly together and tightening the clamp screw until the mounting is sturdy. Nice arm though.
thank you so much for this tutorial and how thorough you were. i have this monitor and this mount, and since the adapter situation on the back of this monitor + my issues in the past with monitor mounts, i wasn't feeling super confident about installation. this really eased my fears and everything looks great!! you rock!
Came here from the review of this monitor (i just ordered it today from amazon lol), I really like your presentation style, beard and how you explain things. Subscribed!
Love your origin story - as good as any marvel super hero ;) Seriously though, thank you for the kind words and subbing. Really cool stuff coming soon. Let me know how you like the monitor when it arrives!
Thanks for the video. I enjoyed the calm demeanor and background music a lot. Will make referring to this video as a reference when I install my new setup a bit more enjoyable as someone who can get frustrated by technology easily.
Bought this monitor arm and it didn’t come with instructions! I checked for them everywhere. Thanks the detailed setup walkthrough, following the video I was able to set it up with no issues
Thanks for the video... I have the same Sceptre monitor and am going with a similar monitor arm. Just got my Apex Desk assembled and even with the electric lift I found that I still need a height adjustable monitor arm.
i didn't know how to adjust the spring, i was kinda bummed out and was looking for another arm to hold my 34 inch monitor. Thank you, you saved me few $
I appreciate the compliments! Believe it or not I just invested in a single lens that’s worth more than my camera! Season two is going to raise the bar again!
You should enjoy it. Remember to tighten the tension settings to keep heavier monitors raised up - there is an Allen screw I should in the video. Looking forward to Season 2 coming soon!
Great vid, but just one gripe. It would be nice if you would show the full extension and rotation of the stand. After watching the video I’m still unsure if I can bring the monitor as far forward as I’d like.
I appreciate the feedback Malek! The arm does have amazing forward movement - if you look at the angles of the individual arms, it does move straight forward about 12”? Shoot me an email and I’ll send you a picture!
Thank you for the video! exactly what I needed! I am trying to look for something under $50, would this one be your best recommendation? My only two concerns are the stability and the ability to be parallel with the wall since I want the monitor to take the least amount of space possible
Brilliant observation. And filming and lighting, sound and etc all takes a ton of time. 😉 I just did an Amazon Live for their new products. Still have a giveaway going with great odds if you need one of these. HTTPS://amazon.com/shop/thenetguy
Great questions! I use Edge sensitive skin shave gel and go between a Harry’s razor and Costco’s new Kirkland blades. Costco’s are very sharp and tend to take off more than hair! Beard 🧔🏻 treatment is a beard shampoo and conditioner, then a leave in. Still looking for new products!
This helped me SO MUCH installing my AVLT-DM03-1 single arm desk mount. However, mine came with a 'cable' that lamely shows me how to thread it through the cable management cover, but once I get the cable through the two covers I'm not sure if I have to secure them to something on the monitor and on the clamp? Do you have any videos on that type of install? Thanks again for this complete video, especially the part about adjusting the tension - game changer for me!
I just bought a dual arm version of the same cheap arm and after purchasing read some reviews. They were horror stories, but usually people don't elaborate on things they did incorrectly. I'm a little worried but your video just made me more confident. Thanks:) Maybe I'll do an install and review video also. You get a sub for being chill. Take care:)
A nice video overall. A very careful explanation. With monitor arms, the quality of the clamp is key. Strenght and grip of the clamp, besides a nice surface to hold, are the base to give it stability. Humanscale Furniture has a really good minor arms. For NYC enthusiasts is available in Manhattan Office Design. #OfficeFurniture #NYC
Thanks! That’s what it takes, one by one☝️ Doing a livestream this Wednesday of a new MSI gaming laptop and some other cool stuff is in the pipe 👍 still wholesome, but the newest videos from my new studio are a whole lot cooler 😎
What’s the range of motion for the VESA amount itselft? 180°? I’m trying to get my monitor flush with the back of my desk because my current stand pushed it out too much. Your content quality is great by the way.
Didn't know that Keemstar started doing regular reviews? Jokes aside, great vid! very informational, I'm planning to get one to save a lot more table space as this AOC C24G1 has such a space consuming leg.
Just bought the 2 arm one with your affiliate. Originally I was looking for arms that sit flush against the wall so I won't need to bring my table back, this looks like just that.
@@TheNetGuy They're definitely solid but I really should've bought the 1 arm twice rather than the 2 arm. Doesn't sit as nice with the wall but hey it works. Thanks for the tutorial by the way.
Basically came to see what kind of Vesa the Specter came with as I'm considering it as a upgrade from my current 2560x1080 LG for the higher refresh rate and low frame compensation.
wish you played around with the monitor at the end, instead of playing games, I wonder how much movement it has and if it can be stretched more so I can watch movies from my bed.
I’ve got one coming from Sceptre. 27”, quad HD (2560x1440), IPS, FreeSync and 165hz I believe. The big thing is the IPS for color accuracy. I’ve got a data color Spyder Elite color meter/calibrator on my desk at home ready to test it when it arrives. What kind of video editing do you do?
@@TheNetGuy Got it delivered yesterday so right now wanted to install but there are missing parts there is no bracket so no way to install it to the desk i'm so mad now my time is wasted cuz i have to send it back to amazon
Uh oh - should be from mount pro. Similar name but different company. Here's the link: geni.us/tng-singlearm Most are very similar. That sucks though - Amazon will make it right quick though :(
The adapter comes with box? becouse i have 2 27 curved screens. i just got a "exspensive" mount and i cant use that for my primary monitor. both my monitors are samsung 27 curved, one of them is 144hz and second one is 60hz. i was not able to mount my primary monitor becouse screw holders on monitor was not same as mount screws. so can i use this 29$ arm for my main monitor?
Hey! I was wondering if this would last long, I've seen some reviews about how the monitor was laying on their desk because the arm broke within a 2-3 week period
Oh my goodness I thought your beard was fake. Sorry sorry sorry. In other news I built my 29 dollar Sarah Connor terminator arm...er mountup monitor arm as you were building yours. This was incredibly important. Display wise, I only had a 43 scepter, and two 52 inch TCls monitors (none over three hundred dollars!) as my primary display for my gel mesh serta 4x recliner workstation. It was like living in a cave. Obviously I needed an additional 32 inch scepter moniter for folders and what not. Now I never have to alt tab! Oh and I have a mini air conditioning floor unit I call Artoo Detoo which I've set up so when my recliner is reclining, I can move the vents with my toes. I don't understand why everyone doesn't do it this way. It's just better and not excessive in the least bit.
Just bought this but my monitor is unleveled. The sliding bracket that holds the monitor and attached to the monitor arm has too much play between it. Very unfortunate because I like the price of the monitor arm
Question, what is the size of the circular clamp that clamps underneath the table? I have a glass table that has a 1 1/2 wide metal bar underneath that is there to reinforce the table and am worried that the circular clamp is too big or won’t hold my monitor up properly because it may be bigger/wider than the 1 1/2 inch bar underneath my table. Btw good review. Keep up the good work. Thanks in advance.👍
I’ll absolutely check first thing in the morning for you (it’s 1am now and I just finished a code deploy for my day job). My guess is that it’s a little over 1.5”, but a small piece a rubber from a bike tire might soften the clamping and price great stability. More in the morning pacific time!
Just watched this vid. Very informative and relevant even 3 years after filming. I noticed a slight oopsie at 13:18 where the VESA mount is only secured by two screws, with the other two loose. Paused and replayed to confirm this @TheNetGuy I hope the monitor was still secure?
Yeah this VESA mount and monitor don’t play well since it’s an adapter with a center stud. Been loving their mounts ever since. This was two studios and three years ago 😜
I randomly found this in my recommended and surpassingly I had the same monitor , I hope you still respond to comments and if you do, do you have a link to the adapter you used for the monitor or is it included with the stand?
Hey Swami! Glad to have you here. The adapter is in the monitor box. If you lost it or can’t find it, check with a Sceptre and they’ll send you a new one.
Monitor arm is convenient ✨ I also use two monitors with monitor arms attached. The video was also very easy to understand! I also studied videos. Thank you. With love from Japan :)
I watch this to research how the gas strut stands function. I'm trying to decide if the gas strut feature is worth the additional money. How are you liking this stand? Do you find it more convenient than the traditional hinged stands?
Morning Nathan! Gas monitor arms are by far my favorite kind. Full range of motion and adjustability means you have ultimate flexibility of your setup. Mount Pro and ATUMTEK make some of the nicest ones. Single, dual and triple. If you check out some of my other videos on the channel I’ve reviewed several models and did an hour+ live stream 👍
@@TheNetGuy Thank you for your insight. I can't remember what they call it but do you recommend products through amazon where you get revenue for purchases? If you do I would be happy to use your links.
hows it holding up after two years? i have a 32" monitor weighing in at 14.33lbs so right at the max weight for this arm.. i;ve heard these budget arms are prone to failing at the gas strut where it will no longer support the weight of the monitor after a year or so? what's been your experience so far?
Yes, the VESA adapter plate comes in the monitor box. Don’t lose it in the packaging! If you use the amazon link in the video description it helps this channel and doesn’t cost you any more. Thanks for watching and commenting!
Take a look at my ATUMTEK follow up video too if you think you may ever run duals. It’s a great stand also. Thanks for watching and commenting! Welcome aboard!
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
timestamps
0:05 - 0:51 Introduction and explaining how the monitor arm benefits you and your setup
2:36 shows how the arm clamps to the desk in the instructions
3:25 -4:02 explains how the arm attaches to the screen and how the arm is held up
The rest of the installation tutorial is great but I don't need that right now because I'm just trying to explain to my parents what a monitor arm is
13:05 see how much more space there is on the desk area vs the stand that comes with the screen? See how easy it is to organize cables, and plug them into the screen..
14:27 using the monitor on the computer. looks more comfortable vs straining the neck to look down
Beautiful my friend! Thank you!
The bottom screws of the VESA mount isn't securely screwed in. Its looks loose there. 13:16
Eagle eyes my friend! It’s actually down, but the way the C30 works it has a bolt in the middle that prevents it from being totally flush. I think I’ll do a review update soon.
His voice. The music. The shirt. This man is all about peace and joy. Thanks for uploading.
Thanks Aaron! And to think I almost didn’t release this video :)
You forgot the epic beard
@@luv2stack love it!
Feels like a massage studio
Not sure if that’s a compliment, but thanks!
I swear I have never seen a more wholesome person in my life u earned a sub
You made my month man! Thank you for watching and I hope you enjoy the newest videos from this season. I'm dropping a video later today too.
Love his shirt I used to watch him paint
The second I saw this dude and the bob ross shirt I instantly went "ok this guy is happy as -hell- heck
FBI is always watching
This is the perfect video really.
- on point color grading
- great low and slow voice
- set-up tutorial.
Needless to say, I bought it and am loving the taller height and increased desk space.
Loving the comment! I always feel like I should speak faster like the other ‘tubers. Glad to hear you like it!
The smile on his face when he finished wanted to make me cry tears of joy this is the best review I ever watched I had to drop a sub have a great rest of your life 😁❤️
Double love my friend! Glad to have you hear and I really enjoy making these for you.
Hi , it would be cool to see more of a full range of motion test. Also review after a half year or some time would be cool. Like if it doesnt breake or if the gass spring don't breake. Cool material, but you can do second review now to maybe let people know about those two things, because i was particurairly looking for that. Also if the screw dont get loose in a place where you mount it to the desk. This are technicall details which you can know only after you get equipment like that. So i would definiatelly apprecaite seeing those in a video
:) and im looking forward to video about that ;)
If someone asks u if ur new or u just came and says Welcome Back (Give this man an oscar)
Glad you liked :) Thanks for watching!
The easier way to clamp the arm on your desk was perhaps joining the two clamp part (with the two small screws) prior to fixing it on your desk. Thereafter, taking the entire assembly together and tightening the clamp screw until the mounting is sturdy. Nice arm though.
thank you so much for this tutorial and how thorough you were. i have this monitor and this mount, and since the adapter situation on the back of this monitor + my issues in the past with monitor mounts, i wasn't feeling super confident about installation. this really eased my fears and everything looks great!! you rock!
"This is attached now, nice and firm."
Literally still wiggling as he puts slight pressure on it.
Guilty as charged :) The ATUMTEK dual arm version I just reviewed is a rock. This one is still an excellent budget choice though.
@@TheNetGuy it's 20$ more
@@distortimus7631 $20 for more RGB Lights lmao
@@Girzzlyঐু I'm being cheap on buying monitor stand, whilst I just ordered a synth worth 2.5k 😂
Thanks for the great review.
Any feedback after almost a year? Did the stand hold his promises?
Thanks for the review! I can't really justify spending $150+ on a monitor arm. This one looks good.
It’s a great arm. Review of their sit-stand desk topper coming soon!
Dude, I just subscribed to your channel and gave a like just because of your spectacular Bob shirt.
The Bob Ross of tech reviews. Loving the vibes ma man 🙏🏻🙏🏻
Came here from the review of this monitor (i just ordered it today from amazon lol), I really like your presentation style, beard and how you explain things. Subscribed!
Love your origin story - as good as any marvel super hero ;) Seriously though, thank you for the kind words and subbing. Really cool stuff coming soon. Let me know how you like the monitor when it arrives!
Yo I'm sold on this stand shits cool and second the beard game
Thanks for the video. I enjoyed the calm demeanor and background music a lot. Will make referring to this video as a reference when I install my new setup a bit more enjoyable as someone who can get frustrated by technology easily.
I loved your thoughtful and rational comment :) thank you for watching, commenting and subbing!
Bought this monitor arm and it didn’t come with instructions! I checked for them everywhere. Thanks the detailed setup walkthrough, following the video I was able to set it up with no issues
I needed this video, well done, thank you. Subscribed.
I needed this comment. It made me smile! Glad I could help! Enjoy and lots more to come!
i have the same monitor stand if you look at the bottom of the arm there is plastic that clips off for cables to run thru, though this would help
Thanks for the video... I have the same Sceptre monitor and am going with a similar monitor arm. Just got my Apex Desk assembled and even with the electric lift I found that I still need a height adjustable monitor arm.
i didn't know how to adjust the spring, i was kinda bummed out and was looking for another arm to hold my 34 inch monitor. Thank you, you saved me few $
The quality of your videos is outstanding! Keep up the good work
I appreciate the compliments! Believe it or not I just invested in a single lens that’s worth more than my camera! Season two is going to raise the bar again!
Thank you for this video, just ordered this mount for my new set up! I hope it works out well. Looking forward to watching more from you!
You should enjoy it. Remember to tighten the tension settings to keep heavier monitors raised up - there is an Allen screw I should in the video. Looking forward to Season 2 coming soon!
Joe Perry I got it about a week back and it’s perfect! It’s much more elevated allowing more space on my desk. I highly recommend it.
Where did you get that adapter mount? The one you slip on at 8:25? Was that part of the kit? My Sceptre 30-inch curved never came with that.
I just looked for mine as well and could not find it!
Also cannot find a replacement online at all. Super frustrating! I contacted Sceptre support. Hoping they can send out a replacement!
Sorry gents, it should have been in the box. If you need it, Sceptre will send you one, just contact them. 👍
Very calm and very straight forward honest review i really like it!
Another video launches tomorrow - and I have a dual gas monitor arm coming up!
Great vid, but just one gripe. It would be nice if you would show the full extension and rotation of the stand. After watching the video I’m still unsure if I can bring the monitor as far forward as I’d like.
I appreciate the feedback Malek! The arm does have amazing forward movement - if you look at the angles of the individual arms, it does move straight forward about 12”? Shoot me an email and I’ll send you a picture!
I have been looking for a video where this monitor is being mounted. Thank you! I now have a mount I can buy for this monitor!
Thanks man , i have almoast the same model , and this help'ed me figure out how the spring works :)
Glad it helped!
Thank you for the video! exactly what I needed!
I am trying to look for something under $50, would this one be your best recommendation? My only two concerns are the stability and the ability to be parallel with the wall since I want the monitor to take the least amount of space possible
Yes, definitely recommend this one. Are you going single monitor or dual? If dual there's a different mount I think is in the description.
I like that we can see from the time on the Monitor that it took less than half an hour to install even with filming added in.
Brilliant observation. And filming and lighting, sound and etc all takes a ton of time. 😉 I just did an Amazon Live for their new products. Still have a giveaway going with great odds if you need one of these. HTTPS://amazon.com/shop/thenetguy
This is the first video i have watched of yours. Super chill vibe, keep up the great content. Subbed!
Thank you!!
I'm buying this mount for my Gigabyte 34" ultrawide, awesome review, if Señor Ross trust u, there's no way I couldn't, thanks again for the review
You’ll love it! Congrats!
Hello John, I have two questions for you;
1) How/what do you use to shave your head?
2) What product are you using for your beard?
Great questions! I use Edge sensitive skin shave gel and go between a Harry’s razor and Costco’s new Kirkland blades. Costco’s are very sharp and tend to take off more than hair!
Beard 🧔🏻 treatment is a beard shampoo and conditioner, then a leave in. Still looking for new products!
Cool, I got a 27 inch Sceptre monitor. I am getting a VESA mount next month,
Thanks for posting, just got the same one as part of my new home office setup. I appreciate your work. Thanks again!
Awesome Ramón! Thanks for watching and I have a lot more coming soon!
This helped me SO MUCH installing my AVLT-DM03-1 single arm desk mount. However, mine came with a 'cable' that lamely shows me how to thread it through the cable management cover, but once I get the cable through the two covers I'm not sure if I have to secure them to something on the monitor and on the clamp? Do you have any videos on that type of install? Thanks again for this complete video, especially the part about adjusting the tension - game changer for me!
Just bought this arm... used your link btw! Hope its good.. comes to tomorrow. Thanks as always for the good videos.
Thank you! Remember to tighten the adjusting screws down to counter the weight of whatever monitor you have. So far it’s been working great.
@@TheNetGuy I've had it setup for a few days now its great! Ill buy another for my second monitor soon.
Thanks for the review video.
Far out! I have another video about to drop - hopefully tomorrow. Not for the faint of heart - soldering on a laptop motherboard. Aye!
I just bought a dual arm version of the same cheap arm and after purchasing read some reviews. They were horror stories, but usually people don't elaborate on things they did incorrectly. I'm a little worried but your video just made me more confident. Thanks:) Maybe I'll do an install and review video also. You get a sub for being chill. Take care:)
For sure! People rarely follow directions and almost never adjust them properly. Good luck!
Howd it go
Amazing Video................ is this mount is specific for desk or can be use on the wall ?
You have such a good vibe it makes my day better. Thank you I am getting ready for christmas
I subscribed
A nice video overall. A very careful explanation. With monitor arms, the quality of the clamp is key. Strenght and grip of the clamp, besides a nice surface to hold, are the base to give it stability. Humanscale Furniture has a really good minor arms. For NYC enthusiasts is available in Manhattan Office Design.
#OfficeFurniture #NYC
I still prefer the North Bayou mount but that Chechen carpet beard is extremely well-mounted under the dome.
I love this guy, he's so damn wholesome.
The feeling is mutual. About your comment of course 😉
@@TheNetGuy Holy shit...you respond fast. You've got yourself a subscriber :)
Thanks! That’s what it takes, one by one☝️ Doing a livestream this Wednesday of a new MSI gaming laptop and some other cool stuff is in the pipe 👍 still wholesome, but the newest videos from my new studio are a whole lot cooler 😎
@@TheNetGuy Now this, this is next level.
Thanks looking at getting one of these arms.
I actually have this stand and didnt know how gas arms work. Big thanks
You bet man. Just make sure you adjust the preload and it’s awesome.
The shirt is way too awesome. I need one!
Great video I ordered the adapter mount from a Sceptre and was wondering how it went on thanks
Thanks for the review, I saw this On amazon. Thinking about buying it.
Can’t go wrong. Friday I’m posting their sit stand desk converter.
What’s the range of motion for the VESA amount itselft? 180°? I’m trying to get my monitor flush with the back of my desk because my current stand pushed it out too much. Your content quality is great by the way.
this is a nice cheap upgrade for any setup, good vid man keep it going
Thanks for the vid gonna buy one with ur link , also one thing, this stand has cable management built in for a clean look.
You'll like it! Thanks for commenting and watching!
Didn't know that Keemstar started doing regular reviews?
Jokes aside, great vid! very informational,
I'm planning to get one to save a lot more table space as this AOC C24G1 has such a space consuming leg.
Just ordered this a few days ago lol now just waiting on my desk so I can install 😁
is this still doing good in 2021?
Yes, and they have a silver version out now too I’ll be updating with soon. Enjoy!
Just bought the 2 arm one with your affiliate. Originally I was looking for arms that sit flush against the wall so I won't need to bring my table back, this looks like just that.
These things are amazing. Let me know how you like them. Fit and finish is the best I’ve seen!
@@TheNetGuy They're definitely solid but I really should've bought the 1 arm twice rather than the 2 arm. Doesn't sit as nice with the wall but hey it works. Thanks for the tutorial by the way.
Perfect! Just what I needed.
Thanks for this video.
If you bought a cheap arm monitor stand and it cant lift your heavy monitor up just use a zip tight and tight the arm so it locked into position
Basically came to see what kind of Vesa the Specter came with as I'm considering it as a upgrade from my current 2560x1080 LG for the higher refresh rate and low frame compensation.
The Sceptre C30 uses a custom vesa mount plate. Don’t lose it!
@@TheNetGuy Ye I figured it would be, but I wanted to see it visually so I'm glad I found your vid. still deciding between a few options so. :3
Subbed cuz you are like the bob ross of computer tech
Helpful info. Thanks for taking the time.
I’ve got a new video from the same company on their standing desk converter coming out in the next 24 to 48 hours.
wish you played around with the monitor at the end, instead of playing games, I wonder how much movement it has and if it can be stretched more so I can watch movies from my bed.
It’s got really good range of motion. I did some live streams for Mount Pro and you can see he range better 👍
All i got to say is.... Love the shirt. Oh and great review I ended up buying this mount and its great specially for the price.
Great Video! Thanks for the review
Thanks Matt, lots of cool new videos this season in my channel as well.
Did they shoot the price up? Its saying $170 on amazon. I was looking forward to buying it too.
cool review..You are the only person who opens and explains the manual book😅👍🏻
I appreciate the comment! Some viewers like these long form reviews / how-to videos; others just like specs parroting 🦜- hard to strike a balance.
The Net Guy done subscribe👍🏻can you suggest me the best budget monitor for video editing under 300 dollars
I’ve got one coming from Sceptre. 27”, quad HD (2560x1440), IPS, FreeSync and 165hz I believe. The big thing is the IPS for color accuracy. I’ve got a data color Spyder Elite color meter/calibrator on my desk at home ready to test it when it arrives. What kind of video editing do you do?
Ordered from amazon and waiting for delivery and i was looking for videos about it and i found your very good video you got a sub from me sir =)
You won’t be disappointed - in either choice! Thanks for the sub!
@@TheNetGuy Got it delivered yesterday so right now wanted to install but there are missing parts there is no bracket so no way to install it to the desk i'm so mad now my time is wasted cuz i have to send it back to amazon
Shoot! Was it from Amazon warehouse? That’s odd for them to sell used as new.
@@TheNetGuy Shipped by amazon sold by Mountup and i wasn't open so its new they just didn't place the items in the box
Uh oh - should be from mount pro. Similar name but different company. Here's the link: geni.us/tng-singlearm
Most are very similar. That sucks though - Amazon will make it right quick though :(
The adapter comes with box? becouse i have 2 27 curved screens. i just got a "exspensive" mount and i cant use that for my primary monitor. both my monitors are samsung 27 curved, one of them is 144hz and second one is 60hz. i was not able to mount my primary monitor becouse screw holders on monitor was not same as mount screws. so can i use this 29$ arm for my main monitor?
Hey! I was wondering if this would last long, I've seen some reviews about how the monitor was laying on their desk because the arm broke within a 2-3 week period
Oh goodness I’ve never heard of that. These arms have lasted years for me. Never a problem with them. Are they adjusting them properly?
thanks for the review, really appreciate it!
I really appreciate the thanks!
Hey brother did it come with the adapter, or did you purchase that separate
Oh my goodness I thought your beard was fake. Sorry sorry sorry. In other news I built my 29 dollar Sarah Connor terminator arm...er mountup monitor arm as you were building yours. This was incredibly important. Display wise, I only had a 43 scepter, and two 52 inch TCls monitors (none over three hundred dollars!) as my primary display for my gel mesh serta 4x recliner workstation. It was like living in a cave. Obviously I needed an additional 32 inch scepter moniter for folders and what not. Now I never have to alt tab! Oh and I have a mini air conditioning floor unit I call Artoo Detoo which I've set up so when my recliner is reclining, I can move the vents with my toes. I don't understand why everyone doesn't do it this way. It's just better and not excessive in the least bit.
Great video, does the mount allow you to move the monitor forward/backward?
Yep, you can swing it, tilt it, twist it. I highly recommend them if your monitor supports it.
Nevermind the stand, that beard though!
Great review man!
Glad you like!
Just bought this but my monitor is unleveled. The sliding bracket that holds the monitor and attached to the monitor arm has too much play between it. Very unfortunate because I like the price of the monitor arm
Thx brother! Just bought one using your affiliate link.
I just installed mine on my 5-year old monitor; makes a world of difference! Can't believe I was using my monitor without a control arm for 5 years.
At 2:48 my question answered.. brilliant
Great video. Can I ask how do you find the manoeuvrability of the gas monitor arm? I use a mechanical one and find them to be tricky to adjust. Thanks
Very easy! Once you have it adjusted right it floats like a breeze and moves any position! Just remember counter clockwise is tighter usually.
Very amazing video help me install my mount desk very easy thank you and keep doing more videos like this
Question, what is the size of the circular clamp that clamps underneath the table? I have a glass table that has a 1 1/2 wide metal bar underneath that is there to reinforce the table and am worried that the circular clamp is too big or won’t hold my monitor up properly because it may be bigger/wider than the 1 1/2 inch bar underneath my table. Btw good review. Keep up the good work. Thanks in advance.👍
I’ll absolutely check first thing in the morning for you (it’s 1am now and I just finished a code deploy for my day job). My guess is that it’s a little over 1.5”, but a small piece a rubber from a bike tire might soften the clamping and price great stability. More in the morning pacific time!
Thanks for the video.
What's the minimum depth of the arm from the wall to the front edge of the monitor ?
Thanks
Brilliant video was a bit skeptical on buying it but after this video anymore.
Great value for the money. I really need to do a monitor arm special!
Just watched this vid. Very informative and relevant even 3 years after filming. I noticed a slight oopsie at 13:18 where the VESA mount is only secured by two screws, with the other two loose. Paused and replayed to confirm this @TheNetGuy I hope the monitor was still secure?
Yeah this VESA mount and monitor don’t play well since it’s an adapter with a center stud. Been loving their mounts ever since. This was two studios and three years ago 😜
World class ASMR content.
I randomly found this in my recommended and surpassingly I had the same monitor , I hope you still respond to comments and if you do, do you have a link to the adapter you used for the monitor or is it included with the stand?
Hey Swami! Glad to have you here. The adapter is in the monitor box. If you lost it or can’t find it, check with a Sceptre and they’ll send you a new one.
Monitor arm is convenient ✨
I also use two monitors with monitor arms attached.
The video was also very easy to understand! I also studied videos. Thank you. With love from Japan :)
wishing u a happy and long life!
🙏
I like your gaming set up! Do you mind if I ask the specs of your pc?
Yeah it’s an AMD Ryzen 5 3600x, 16GB DDR4, 1 TB NVME boot/active gaming drive and 2 TB 7200 RPM game storage drive. And of course a Sceptre C30.
I watch this to research how the gas strut stands function. I'm trying to decide if the gas strut feature is worth the additional money. How are you liking this stand? Do you find it more convenient than the traditional hinged stands?
Morning Nathan! Gas monitor arms are by far my favorite kind. Full range of motion and adjustability means you have ultimate flexibility of your setup. Mount Pro and ATUMTEK make some of the nicest ones. Single, dual and triple. If you check out some of my other videos on the channel I’ve reviewed several models and did an hour+ live stream 👍
@@TheNetGuy Thank you for your insight. I can't remember what they call it but do you recommend products through amazon where you get revenue for purchases? If you do I would be happy to use your links.
Yep, Amazon.com/shop/thenetguy - enjoy!
thank you dude your a cool dude your video helped me and my mom fix our problem thanks
hows it holding up after two years? i have a 32" monitor weighing in at 14.33lbs so right at the max weight for this arm.. i;ve heard these budget arms are prone to failing at the gas strut where it will no longer support the weight of the monitor after a year or so? what's been your experience so far?
Great video. I was thinking about getting the monitor and the mount. Does the adapter of the Monitor come with the monitor??
Yes, the VESA adapter plate comes in the monitor box. Don’t lose it in the packaging! If you use the amazon link in the video description it helps this channel and doesn’t cost you any more. Thanks for watching and commenting!
Have the same monitor thanks for the video extremely helpful!!
Thanks for watching! Hopefully I did it justice.
excellent review I about to buy monitor which needs to be mounted with this arm!
I subscribed the moment I saw your bob ross T shirt. But his fro was more real than your beard.
Aweeeeeee I’m workin on it!
Thank you so much for this video! I'm buying a monitor stand that is identical to this. Thanks for making it
Thanks for watching Tyler! Other great videos coming, Season 2 drops on Wednesday!
Thank you I was looking for a mount for this monitor:)
Take a look at my ATUMTEK follow up video too if you think you may ever run duals. It’s a great stand also. Thanks for watching and commenting! Welcome aboard!
Not annoying background music. Have a like.
I know right!?
I really liked the way he is presenting..
Very enjoyable to watch!
Love your profile icon too!
Nice set up, nice review. Thank you sir.
Thank you for the comment! Lots of newer videos and more product reviews since this one and even more as I work through the backlog.