"It may be difficult for a person weighing under a 140 pounds to operate the hand pump beyond 2000 psi" ... of all the reviews , posts, comments I have see ... you are the only one that has mentioned that very important little detail. Thank thee
Gr8 vedio !! Thank u so much !! I'm new to pcps and i didn't know how to use the hand pump properly until i watched this vedio !! Tons of other stupid vedios on TH-cam about hand pumps were just a waste of time !! Thanks again 💜💜💛💙💛💚💗
I just bought an Umarex origin with a numeric hand pump even the first 10 strokes are incredibly hard to fill up in the pump seems to catch am I doing something wrong any input is appreciated.
Thank you for the informative video. Is there any way to retro fit a real moisture filter at the intake on this pump? It's a decent unit for the money. However, it turns my Marauder into a squirt gun in my humid local climate.
The water filter needs to go between the gun and pump. eBay has them. High pressure air line oil/water filter. $50-$100. The brass $100 one is recommend by reputable airgun reviews on this biased video viewing platform
Wait...What? I'm an old man, I'm a trapshooter, I'm well versed in firearms, They had air guns when? My brain is doing a robin Williams imitation full coke.
How many shots can you get once the gun is charged? How many strokes are required from the pump to fill the gun? It's amazing you can get 3,000 psi out this thing! Thanks for the video.
@pyramydair Ok so what if I buy the Benjamin pump and want to buy a different pcp gun is it going to work and are the adapters of they make them cheep .
I have a Benjamin pump. After 6 months, the upstroke progressively started to get heavier. Now I can't even lift it up. Suction keeps it from being lifted, as if the air intake on the higher stage is keeping it from taking air. Got any ideas what's happening inside?
I have found in my really limited experience that I would probably have both a scuba tank and a hand pump in the end.. Using a friends stuff (I'm still buying) I have found when out camping/hunting the pump is great. You're not shooting as much so it's convenient. When target shooting at the range though the pump quickly becomes a pain. The difference is in the amount of shooting you're going to do. If you plan on doing a lot you'll like the scuba tank, but it's not very portable but that's not a issue at the range. In the field with less shooting the pump rules because it's faaar easier to carry than the tank and still has the ability to fully charge if you do want to do some 'plinking'.. but be prepared to rest if you're an old guy like me. :)
I always keep a thick piece of plastic over the end of the adapter, held in place by an elastic bad wrapped around it 2 or 3 times, so as no contaminants can get in there. You don't want to be pumping an tiny bits of crap in to your chamber :-)
New to pcp,s , it seems the grease on the shaft will fade eventually, in that case how and what do I lube it with and the manuel says DONT ALLOW OIL TO ENTER THE AIR INLET, TO WHAT INLET IS THIS REFFERING TO AS FAR AS LOCATION, ALL I SEE IS A SHAFT . MAKES ME AFRAID TO EVEN ATTEMPT ANYTHING CAUSE I KNOW AS ANYTHING LUBE WEARS OUT
I am in the process of pumping my Benjamin up for the first time. Never had a PCP before. That pump is a cardio machine for an out of shape fat ass like me that smokes Marlboro's. LOL. Glad my 100 Cu Ft bottle will arrive Tuesday.! A smooth running hand pump though!
Basically, thats the o-ring from the smallest rod of the pump, compressing all the air and sealing it. That O-ring is damaged and it needs to be changed and re-lubed. :)
I recently purchased a Benjamin high pressure hand pump, but now a month later it gave me a problem. Whenever I take off the pressure valve from the rifle, all of the air comes out of the rifle. Do u know how I can fix this problem ? Thanks
hello there..hi I've only used a pump for the past 2 yaers fir my air guns....do you think I'm running the risk of corrosion in my cylimders? thank you.
I wish someone would offer a larger volume pump that works in reverse as an alternative to regular pumps. If you can pull instead of push weight is not an issue and if some added physical affort will fill a cylinder faster I'm all game. I wouldnt use it all the time but it would be nice to have the option.
The Umarex Origin is also a *great* entry PCP. It comes standard with a hand pump for the win. You will need a scope, red dot sight, or other rail-mount optic/sight. The Origin does not have open/iron sights.
Yes. The water filter for hand pump is necessary. Mandatory especially for the higher end guns. I didn’t use one on the umarex gauntlet for awhile but gave two high pressure water vapor filters inline between pump and pcp tanks.
The factory grease on the pump shaft won't last long. Wipe it clean every 5- 7 times you use the pump and reapply silicone diving grease to the shaft. Just put a dime size amount on your palm and rub the pump shaft up and down. This will extend life of seals greatly. Amazon sells it for cheap.
mat barnett You're paying for something that can pump up to 4500 psi BY HAND. There's obviously a lot of precision manufacturing and quality control put into a product like this, why would you cheap out? It's this, or a shoebox compressor + air compressor unit that would run upwards of $1000 /or paying for refills at the local scuba/paintball shops.
mat barnett just use the hand pump it’s cheaper and it’s good exercise just make sure your sweat doesn’t hit the rifle otherwise you will have a problem with corrosion
Does anyone know what I need to grease the shaft on My air pump to fill my Benjamin Discovery rifle?????? Someone anyone need help on this one. Don Jackson
Gee Trieste Its a three-stage pump, the upstroke refills the first chamber with ambient air while compressing air in the second chamber, than downstroke compresses air in first chamber to a 2-3 bars (which goes into the second chamber mentioned before), while boosting air pressure to a few hundred bars in the third chamber. Its just designed in a way that the user doesn't need as much effort for the upstroke.
thank you for a detailed lesson, much appreciated. but i have a question eventhough you said its not needed, but how and where do i lubricate with silicon oil?
Hey, man. I don't have this Benjamin one, but mine recommends a few drops of oil on the secondary shaft (the shaft that is concealed when the pump is fully collapsed). Put a couple drops on the metal and pump it a bit to lubricate evenly. Cheers.
Don Jackson Get Crosman RMCOIL and put 2-3 drops on the main shaft and lubricate evenly with you clean finger, You can also buy White Lithium grease from many auto-parts stores to lubricate the seal.. The main concern is to never use petroleum based products! Use only Synthethic Silicone Grease/Oil. If your pump fail don't panic! its incredibly easy to rebuild the pump and inexpensive! I can do mine completely in 5 minutes, The rebuild kit cost only 12 bucks with all the O-Rings.
Yes, good tip. I suggest the Hatsan Mod 135 Vortex QE . This puppy is a real BANGER in 30cal. Cocking effort of 50lbs will be a strain on the under 140 pound users, but well worth the effort!
13-years (2024) after this video was made, I bought my first PCP and found this to be a great lesson on a topic that was new to me. Thank you.
Same for me last year haha and now im here because this was of the only video I had skipped
Always fun to come back to one of the series that got me back into airgunning
Feels like a corporate training video that a new employee has to watch as part of their training 😂
I've learned more about airgun hand pumps in the last four minutes than I have in my entire life might get into PCP thanks
"It may be difficult for a person weighing under a 140 pounds to operate the hand pump beyond 2000 psi" ... of all the reviews , posts, comments I have see ... you are the only one that has mentioned that very important little detail. Thank thee
I dont think its that hard, and i weight 160 pounds.
175lb here and 2000+ psi gets unbalanced easily. If only they can make a stair stepper so you just use your biggest muscles.
I'm 130lbs I can pump my PCP using a
3 stage hand pump to 2800psi.
@@heklikmay i ask where did you buy this pump and what brand name or company. I am 130. And can’t push any hand pump 😐
Gr8 vedio !! Thank u so much !! I'm new to pcps and i didn't know how to use the hand pump properly until i watched this vedio !! Tons of other stupid vedios on TH-cam about hand pumps were just a waste of time !! Thanks again 💜💜💛💙💛💚💗
Do you disconnect the gun before or after bleeding the valve?
I just bought an Umarex origin with a numeric hand pump even the first 10 strokes are incredibly hard to fill up in the pump seems to catch am I doing something wrong any input is appreciated.
Pretty good class and wow! 14-years (2025). Greetings from Chile.
Thank you for the informative video. Is there any way to retro fit a real moisture filter at the intake on this pump? It's a decent unit for the money. However, it turns my Marauder into a squirt gun in my humid local climate.
The water filter needs to go between the gun and pump. eBay has them. High pressure air line oil/water filter. $50-$100. The brass $100 one is recommend by reputable airgun reviews on this biased video viewing platform
Thanks! Exactly what I was looking for!
Wait...What?
I'm an old man, I'm a trapshooter, I'm well versed in firearms,
They had air guns when?
My brain is doing a robin Williams imitation full coke.
How many shots can you get once the gun is charged? How many strokes are required from the pump to fill the gun?
It's amazing you can get 3,000 psi out this thing! Thanks for the video.
@pyramydair Ok so what if I buy the Benjamin pump and want to buy a different pcp gun is it going to work and are the adapters of they make them cheep .
I have a Benjamin pump. After 6 months, the upstroke progressively started to get heavier. Now I can't even lift it up. Suction keeps it from being lifted, as if the air intake on the higher stage is keeping it from taking air. Got any ideas what's happening inside?
great lesson
Probably best to attach a moisture filter trap for regulated airgun. Correct? Yah or nah? 😁
is it possible to put moisture filter in a benjamin hand pump?
What is the price of this air pump and the total cost to send it to saudi arebia ............ thanks
Very helpful info for a newbie like myself. Thank you!
How many pump strokes does it take to fill the gun?
I have found in my really limited experience that I would probably have both a scuba tank and a hand pump in the end.. Using a friends stuff (I'm still buying) I have found when out camping/hunting the pump is great. You're not shooting as much so it's convenient. When target shooting at the range though the pump quickly becomes a pain. The difference is in the amount of shooting you're going to do. If you plan on doing a lot you'll like the scuba tank, but it's not very portable but that's not a issue at the range. In the field with less shooting the pump rules because it's faaar easier to carry than the tank and still has the ability to fully charge if you do want to do some 'plinking'.. but be prepared to rest if you're an old guy like me. :)
which pump would be the best for my new HW100t? thanks...
pump for hammerli pneuma?. do I need anything other than fitting the rifle comes with?
I always keep a thick piece of plastic over the end of the adapter, held in place by an elastic bad wrapped around it 2 or 3 times, so as no contaminants can get in there. You don't want to be pumping an tiny bits of crap in to your chamber :-)
I'll have to look where the air enters next time I pump.
New to pcp,s , it seems the grease on the shaft will fade eventually, in that case how and what do I lube it with and the manuel says DONT ALLOW OIL TO ENTER THE AIR INLET, TO WHAT INLET IS THIS REFFERING TO AS FAR AS LOCATION, ALL I SEE IS A SHAFT . MAKES ME AFRAID TO EVEN ATTEMPT ANYTHING CAUSE I KNOW AS ANYTHING LUBE WEARS OUT
I am in the process of pumping my Benjamin up for the first time. Never had a PCP before. That pump is a cardio machine for an out of shape fat ass like me that smokes Marlboro's. LOL. Glad my 100 Cu Ft bottle will arrive Tuesday.! A smooth running hand pump though!
hi this is a nice video.. what is the outer tube and inner tube made of? is this steel, aluminum or stainless steel?
Great video!
Excellent video. Thank you
Basically, thats the o-ring from the smallest rod of the pump, compressing all the air and sealing it. That O-ring is damaged and it needs to be changed and re-lubed. :)
Can you use a bicycle pump with a few adjustments?
no your gun will break
Ok, thanks
Please put a link in the description of the video to lead us to the next episode or atleast arrange the playlist. its all messed up.
I recently purchased a Benjamin high pressure hand pump, but now a month later it gave me a problem. Whenever I take off the pressure valve from the rifle, all of the air comes out of the rifle.
Do u know how I can fix this problem ? Thanks
Can you tell me, what liquid can be fill between the outer tube and the inner tube of pcp handpump ?
Silicon oil... if you havnt found out yet RMCOIL 😎
Can u use a bike pump as a cheaper option
hello there..hi I've only used a pump for the past 2 yaers fir my air guns....do you think I'm running the risk of corrosion in my cylimders? thank you.
@pyramydair What the most powerful spring piston. They make in .25
You would love the Hatsan Mod 135 Vortex QE . It's a gas piston that takes 50lbs of cocking effort. My favorite air gun. I have the 30cal.
Thanks I'm getting an Airforce Condor and an air pump. Pump for now. this imfomation is going to be usefull thanks
can itbe used for boke or mower tires? Can you get end of hose fitting to do this??
can i ask a question does anyone know about a footpump aigun?
marlangelXXVIII that would be great idea! If ya find one let me know please
There are footpump airguns made in the Philippines by estrella parco, escopeta, garco, philcolt, & farco
I wish someone would offer a larger volume pump that works in reverse as an alternative to regular pumps. If you can pull instead of push weight is not an issue and if some added physical affort will fill a cylinder faster I'm all game. I wouldnt use it all the time but it would be nice to have the option.
Yes!
*For those of us that don't have the funds for both a gun and compressor,* _what PCP rifles are the most hand pump friendly?_
The new Gamo arrow looking like a great starter gun
@@joebotz1243 It is! Recently gave one for 11 yr old "jr's" birthday. A lot of fun!
The Umarex Origin is also a *great* entry PCP. It comes standard with a hand pump for the win. You will need a scope, red dot sight, or other rail-mount optic/sight. The Origin does not have open/iron sights.
Will it work on a paintball tank
All the air inside the reservoir tank gets released as well on bleeding. Help!
Sounds like a check valve on the tank inlet isn't working.
Great hi-def video!!! FFS!!!
P.S. Nice hangnail!! Professional!!!
240p is not high definition 😂
is it for paintball to
Great tuition on using the pump, one aspect you missed, it is also good exercise.
Is it necessary to fit a moisture trap/filter to it?
Thanks.
Yes. The water filter for hand pump is necessary. Mandatory especially for the higher end guns. I didn’t use one on the umarex gauntlet for awhile but gave two high pressure water vapor filters inline between pump and pcp tanks.
i bet the servant that pumped the old air guns had lots of muscles by the time he retired
i love servants
how do you replace a broken o-ring
The factory grease on the pump shaft won't last long. Wipe it clean every 5- 7 times you use the pump and reapply silicone diving grease to the shaft. Just put a dime size amount on your palm and rub the pump shaft up and down. This will extend life of seals greatly. Amazon sells it for cheap.
And give you a cheap thrill!
Is there any cheaper option other than 150
mat barnett You're paying for something that can pump up to 4500 psi BY HAND. There's obviously a lot of precision manufacturing and quality control put into a product like this, why would you cheap out? It's this, or a shoebox compressor + air compressor unit that would run upwards of $1000 /or paying for refills at the local scuba/paintball shops.
mat barnett just use the hand pump it’s cheaper and it’s good exercise just make sure your sweat doesn’t hit the rifle otherwise you will have a problem with corrosion
WHAT'S WRONG WITH A SPRAY OF THIN MOISTURE RESISTANCE LUBE BEFORE PUMPING.....GOOD FOR SEALS ????
I'm 130lbs it's a great workout to reach 2800psi.
I watch video after video and nobody stops at the top and bottom of the stroke with their pumps. Why is this aren't they doing it right?
Can i hand pump a empty pcp tank?
yes, but pack a lunch, because it will take awhile. ;)
Dont they put moisture in the gun
Does anyone know what I need to grease the shaft on My air pump to fill my Benjamin Discovery rifle?????? Someone anyone need help on this one. Don Jackson
many thanks , very helpful video, some history too!
I fixed the upstroke but not the down.
I'm 70 this kicked my ass !!!!!!!!!!!
I did my pcp to 3000 psi............😥😅😥😅😥😅👅👅👅👅👅💪💪💪💪
Kicked my ass to Albert. I’m 18 yrs jr to your 70.
3:45
Does NOT look like any compression on the upstroke.
Gee Trieste Its a three-stage pump, the upstroke refills the first chamber with ambient air while compressing air in the second chamber, than downstroke compresses air in first chamber to a 2-3 bars (which goes into the second chamber mentioned before), while boosting air pressure to a few hundred bars in the third chamber. Its just designed in a way that the user doesn't need as much effort for the upstroke.
thank you for a detailed lesson, much appreciated. but i have a question eventhough you said its not needed, but how and where do i lubricate with silicon oil?
Hey, man. I don't have this Benjamin one, but mine recommends a few drops of oil on the secondary shaft (the shaft that is concealed when the pump is fully collapsed). Put a couple drops on the metal and pump it a bit to lubricate evenly. Cheers.
@@JohnSmith-zk9rc Thank you man, will do. TU
Good
That was some seriously crude spannering dude! Entertaining though, thank you.
i am from 2020
yes but just make sure u dont over fill it
I had to wipe my pump because it was covered with grit and dirt. What do I need to oil the pump piston again????
Don Jackson
Don Jackson Get Crosman RMCOIL and put 2-3 drops on the main shaft and lubricate evenly with you clean finger, You can also buy White Lithium grease from many auto-parts stores to lubricate the seal..
The main concern is to never use petroleum based products! Use only Synthethic Silicone Grease/Oil.
If your pump fail don't panic! its incredibly easy to rebuild the pump and inexpensive! I can do mine completely in 5 minutes, The rebuild kit cost only 12 bucks with all the O-Rings.
dead link to diagram.. :( plisss
Where is the dead link?
Benefits cardiovascular. Also use proper ergonomics, squat technique.
dead link to diagram
can't believe I am watching a video that is 12years old
What happen to this guy?
2:17... Cheaper, yes Easier, NO!
Who so low resolution?
Land of Hope and Glory?!
i wish my teacher will teach us airgunning in history
1/2 hr to change O rings everytime...sounds to me ""maintenance""" and it is NOT FREE
I have to be honest I had no idea pumping up a PCP was so bloody hard, kind of puts me off them TBH
It'll be steel, aluminium fatigues easily.
With 3000 psi i can make a small air cannon
well then boy buddy you're gonna love guns
video request
Great informative video....but i never trust a guy who doesnt blink !!!!..lol
Buy a top quality springer air rifle. Or keep a supply of Nitro tablets in your pocket.
Yes, good tip. I suggest the Hatsan Mod 135 Vortex QE . This puppy is a real BANGER in 30cal. Cocking effort of 50lbs will be a strain on the under 140 pound users, but well worth the effort!
what are you staring at? reminds me of one of those lizard people that live in buckingham. Oh snap you just been discovered.
yeah, you solved it. he makes eye contact so he's a lizard person. you absolute shambles
Hold on :: search - pcp air rifles cause Corrosion ..yes
"No maintenance needed by the owner" that's a bold faced lie! Lol 'maintaining' this damn thing is all I do
please remake these videos in hd