Building a Powerfeed for my Milling Machine (with a Wiper Motor)
ฝัง
- เผยแพร่เมื่อ 20 พ.ย. 2020
- 🔧 LINK LIST for tools I use in my videos:
hero.page/philvandelay/my-fav...
👕 SHIRTS / Merch Store: phil-vandelay.creator-spring....
🙏🏻 Patreon: / philvandelay
📷 Instagram: / phil_vandelay - วิทยาศาสตร์และเทคโนโลยี
MOST people don't learn from their own mistakes, and virtually never learn from the mistakes of others.
Nice video.
awesome job, just need to add some end stops, these could be added to the directional switch circuit to cut power when it reaches the end of travel.
Agree. Another idea would be a spring that keeps the motor disengaged requiring operator input. Your suggestion is preferable while mine is a bit easier and cheaper albeit more of a pain long term.
i would put an endstopon each site configuered as an NC and then put the power on there so that if it hits the end it shuts the power down to the circuit, in the end it is just a security option, normally you standing besides it when working on it but it can happen that you are looking at something else the longer you use the feature
I was thinking the same thing. My shop bought power feed has a 2 way switch and 2 end stops. And when the switch touches one of the end stop it stops the motor.
Brilliant ! You have a very effective presentation style; your unhidden “learning opportunities” are hugely valuable to many. Great work.
Outstanding. Rapids and all, well done sir.
Excellent result Phil. I love the clutch mechanism. Nice and simple, but it works great.
Incredibly nice integration of the powerfeed whilst maintaining the original function, great job!
Very clever and efficient design! Simple, effective, low-cost and reasonable reliability. Another great build, Phil.
Nice clever solid design man......you never dissapoint.......lovin the keyway broach. Congratulations on the new place look forward to seeing it
"You would think I'd learn from my mistakes... *part flies off into the workshop*"
We've all been there. More than once :)
What an excellent video. It's so useful to hear your thinking as you design it. Really excellent.
Saturday morning breakfast watching yet another therapeutic video from Mr Vandelay of beautiful engineering and inspirational talent...great stuff!
This is exactly what I want to do to my mill. Thank you for such a professional looking and functional build.
Great build Phil! Love the simple in/out configuration you devised.
Thanks for sharing, Cheers
Super simple and so elegant! Thanks for sharing!
Wow, great build in all aspects. Great design, great fab, great fit and finish, very nice!
Brilliant, Phil, well done!!
Very well done from start to finish. You are gifted.
Very elegant design. Thank you for taking the time to make a video.
Some detents on the shafts and a spring plunger replacing one of those socket screws that engages with the slots seem like a nice way to lock this assembly into engaged/disengaged positions
What an outstanding video and build. Your amazing and must stay awake most nights thinking about things to build,
CAD program and all. Loved it Phil.
Great design Phil, it's the most practical X axis feed I've seen so far - simple but solid and compact. I used the same motor by the look of it, 24V 45W 220 RPM , on a Z axis feed for my mini mill and it works fine for travel and 'mill turning'.
Thanks for sharing, Mike
Hi Phil,
A good design and well implemented.
Take care
Paul,,
A nicely presented, designed and implemented project - you will never regret the time and effort you expended on this self-act! A real boon. I made one similar but when I converted my mill to CNC I then made a control box which could be used to drive any of the 3 axis stepper motors - constant torque at any speed - a great improvement!
That was excellent work. People like the idea of wiper motors. I made two videos of them and one of them was my most popular video.
Thank you for such a professional looking and functional build.
I like your videos a great deal. Not only are your projects worthy, your approach to them is admirable. What's more you have good sense in what I believe are called production values. Thank you.
Simplest conversion I have seen to date. Good job.
Definitely one my favorite designs for this I've seen!
absolutely brilliant, loved every bit of this.
Not only does it show all your skills & abilities it is also one of the best videos & explanations of how to overcome one's problems. I'm gona update my mill now. Thanks for the info.
An incredibly elegant design, expertly accomplished. Thank you for showing your work. 👏👏👍😀
Great work, Phil.
Nice upgrade, good design, professional workmanship, great video! Thumbs up!
Very nicely done, I did much the same thirty years ago, getting into my own shop and not able to afford to buy the professional setup. I really like the "clutch" connect/disconnect. That's almost as easy to use as the designed for power feed. Thanks for sharing this!
Now you’re just showing off.
Well done sir.
Very nice work. I like a solution for a problem and unique as well. Brilliant.
Very clean and impressive install!
Great video, as usual! I don't know why, but no matter how bad my day is, I can watch one of your project vids & the troubles of the day just seem to disappear. No matter how many times I watch one of your vids, I always learn something. Keep posting them, I'm gonna keep watching them!
😃👍
You are awesome. Just purchased my first small mill. Great idea. 💡 thanks
I really like this project as it covers different areas of manufacturing from mechanical to electrical work. The workflow is presented in a very calm way. I just enjoyed watching the video. Thanks for the effort.The only idea that came to my mind when watching the final operation was that it might be wise to install the limit switches so that the motor will stop automatically when the end position is reached.
Very nice, simple and robust looking
Great video, very informative. I'm very impressed with your design and workmanship. Thanks for sharing with us. Dan
Satisfying watch. Well executed design and build.
awesome work, your stuff always turns out so polished-looking.
Super! Really nice work!
Neat project and outstanding CGI and matching transitions.
Absolutely excellent!! Very impressive! This is some top notch quality engineuity! It looks so good and professional. The average person would without question think that was a factory component. This project is definitely something to be proud of!
Very neat work. With a coat of paint on those chip guards it would pretty much look like a manufacturers option.
I built something similar for my little antique lathe. I used a 12v car wiper motor that seems to be happy enough running at 18v (It's been running this voltage for over a year now and hasn't burnt out/caught fire yet. :) ). I didn't bother with a clutch as I can just twist it's adjuster 3 or 4 turns to slacken off and remove it's toothed drive belt. I used a wiper motor because they have 2 sets of windings in them for high and low speeds. Coupled with the PWM speed controller it gives me a brilliant feed speed range.
One idea I had, that you might find useful, was to extend the direction switches wires and run them through the "Normally closed" side of a couple microswitches. With some mounting brackets you could use them as limit switches that only break the circuit for feeding in that direction (ie, you can still reverse the feed direction and back the bed away from the triggered switch using the powered feed). In your case it would prevent any chance of running out of bed travel and stalling your motor. In my case I want to do it to help me stop trashing ceramic cutter inserts. If I'm turning a long bar at a VERY slow feed, I'm not adverse to wandering a little way away from my lathe to do something else for a couple of minutes. Sometimes I've got distracted and had to jump back to the lathe when I've heard that familiar Click click click CLACK CRUNCH" sound of lathe tool hitting chuck Jaws !!! :D
Hi Phil, I used your idea to build my powerfeed, but I made some adaptations and it worked perfectly, thanks for the idea, of all it is one of the simplest and most functional.
Excellent design and build!!
There’s only one word to describe this mate absolutely brilliant😀😀👍
This was really awesome to watch . I recently aquired a lathe that has no cross feed and i think of implementing something similar . Well done ! It was carried out with great prescision and care to work just awesome .
You are a true artist sir! Very nice job!
Really nice and clean solution!
Cool Phil.. I like the rubber swarf mats..
Super clean and well done. I'll be copieing this one.
First class work and video , you have a talent, no none stop talking, just to the point well done.
Outstanding as always.
Amazing work!
Very very nicely done, thanks.
simple and cheap, your going to put the shops out of business if you keep giving us these ideas, also well explained with proper video footage explaining the whole process. Loved it.
Your stuff is always so interesting and cool. I bought an Opti BF20 mill this year. I need a power feed and you have given me a lot of inspiration. Great content Phil. Dan from Australia.
I used a cordless drill - the clutch is adjustable. 2speed too!
Dude that is so professional, great job!
Nice job!!! Very professional.
It is kinda fun watching parts fly from the lathe at crazy speeds.
Good job.
Should hold hex collet block with the flats against the vise jaws though. Gripping on the points allows it to come loose.
Very nicely done! Been wanting to do this on my mill for a while
tip: to make the display even easier to read, add a smoked piece of acrylic (like from a dead alarm clock) such that the display sections that are off don't show up as 'white' to your eye. Increases contrast a tonne.
"Imma do something simple"
*whips out 3d model of entire tool*
I came here to say this
the more time you spend designing the less time you spend making it
@@rafaelguimaraes1057 Yep and less stuff goes into the scrap bin!
The return is the satisfaction gained
@@PhilVandelay no such a thing as a “scrap bin” for me. It’s called the “future useful smaller parts bin”
Beautiful design and engineering. 👌👏👏😀
Excellent video... I have watched at least 50 videos trying to find the information you give in this video..
I wanted to use this same type of setup utilizing a windshield wiper motor on my metal lathe feed, this answered "every" concern and question I had and gave me some great design ideas to boot.
Great job. Thank you for sharing
Very professional job!
Nice build and great video! I think NC switches for limiting table travel would be a good idea.
super nice build!
A nice solution to your problem It turned out very good, you could also add some limit switches to it as well. I might do something similar to my mill having seen your video. Thanks.
great work! very inspiring
You did a great job on that !,
Thanks for this. Excellent!
Innovative design, excellent solution and great addition to the shop.
New subscriber. Thanks for sharing.
Best regards from the UK. John.
Absolutely brilliant thank you for sharing 🙂
Very nice. Works great.
Fantastic work
Hi Phil, just found your channel through a recommendation from one of my subscribers. Excellent job, I will be adding power feed to my X axis soon so I may follow this route. Well done. Subbed. Cheers, Jon
Yes! another great vid!
nice solution! thanks for sharing
Very clever ... thanks for the idea
Great is an understatement.
Awesome bro outstanding work 👍
Nicely done! If you add another power feed to one of the other axis, check out the motors that are used to move electric seats. They cost about $12 to $15 USD and are very similar to the wind shield wiper motors. I think I'm going to be adapting some of your ideas to my mill, Thanks.
Top work ,well done
very precise mechanics ... good!
Genius design!
Nicely done.
Beautiful job.
A very very good work. Thank you.
I am going to build this. Thank you for your great video.
great video as always . keep up the great work
Very well done 👏
Sehr gut gemacht, ich werde Deine Ausführung übernehmen. Danke für die klasse Erklärung.