ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Can-Am Spyder F3 Replacement LED Headlight Assembly (Set of 2)

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ส.ค. 2024
  • Can-Am Spyder F3 Replacement Headlights available here: www.slingmods.com/canam-spyde...
    If you're not diggin' the light output of the factory yellow halogen bulbs that came equipped on your Can-Am Spyder, or you are just looking to take the front end of your Spyder to another level, then we have something really special for you. Introducing our Replacement LED Headlight Kit for the Can-am Spyder F3 / F3-S / F3-T & F3 Limited models. These replacement headlights have an IP67 waterproof rating and have been cast specifically for the Can-Am Spyder as a direct OE replacement. Each housing features a polycarbonate lens for optical clarity, as well as an aluminum housing with integrated heat sinks for quick heat dissipation. And of course to keep things in proper Slingmods fashion, this mod is 100% bolt-on and 100% plug n play, thanks to our friends over at TricLED. Now these are more than just replacement headlight housings. They also feature integrated white LED running lights, as well as turn signal functionality enhancing your presence while out on the open road. However, the real star of the show here is the headlight output. While the low beams are 2640 lumens, the high beams kick out 4020 lumens, emitting a bright white 6k light output on the kelvin scale. The illumination of these headlights vs stock is literally night and day, it's actually slightly embarrassing for the stock bulbs.
    0:00 Intro
    3:55 2015-2018 Install
    10:14 2019 Install
    15:17 Signing Out

ความคิดเห็น • 25

  • @jeffhatin1518
    @jeffhatin1518 2 ปีที่แล้ว +5

    After having installed these on my 2022 F3 S I can say I love the illumination of the new bulbs. I drive a fair amount at night as well as during the winter so this is awesome for the extra visibility. Have gotten a lot of compliments on the look and functionality.

    • @frankvalles2384
      @frankvalles2384 ปีที่แล้ว +1

      Did you have to take our Dashboard to remove the cone on your F3s?

  • @frederichartell7390
    @frederichartell7390 2 ปีที่แล้ว +4

    It's about time this is available!

    • @spyderlyf3
      @spyderlyf3 2 ปีที่แล้ว

      Did you order a set?

    • @frederichartell7390
      @frederichartell7390 2 ปีที่แล้ว

      @@spyderlyf3 not yet. Both Sling Mods and TricLED are out of stock

    • @spyderlyf3
      @spyderlyf3 2 ปีที่แล้ว

      @@frederichartell7390 I was lucky to get them on pre-order. They sold out fast. Hopefully they will be back in stock soon.

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว

      They did sell out fast. We're already half way through selling through the next batch as well. Pre-orders will ship out by the end of the month. Please let me know if you guys have any questions. Thx.

  • @Slingmods
    @Slingmods  2 ปีที่แล้ว +3

    🛒Can-Am Spyder F3 Replacement Headlight Assembly Set is available here: www.slingmods.com/canam-spyder-f3-led-replacement-headlight-assembly-drl-turn-signals
    🛒If you're installing on a 2019 or newer Spyder F3, you'll also need our 1:2 Front Fender Power Harness here: www.slingmods.com/canam-spyder-f3-rt-front-fender-expansion-power-harness-2019-up
    🛒Push Pin Removal Tool & Replacement Push Pins are available here if needed: www.slingmods.com/canam-spyder-push-pins-body-panel-clips

  • @farisbawazier7855
    @farisbawazier7855 ปีที่แล้ว +1

    How its work with tricled fog light ? I need explain please

    • @Slingmods
      @Slingmods  ปีที่แล้ว +1

      Hello Faris, our Customer Service Team is standing by for assistance. You can reach them here: www.slingmods.com/index.php?route=information/contact Thank you!

  • @frederichartell7390
    @frederichartell7390 2 ปีที่แล้ว +1

    Also missing 4 of the stainless steel Allen Bolts. They also could be a little longer than what's supplied.

    • @rmg471
      @rmg471 2 ปีที่แล้ว

      Mine was missing them, too. Only enough for one side.

    • @frederichartell7390
      @frederichartell7390 2 ปีที่แล้ว

      @@rmg471 actually the bolts removed fit in the bottom holes even with 1 spacer installed.

    • @rmg471
      @rmg471 2 ปีที่แล้ว

      @@frederichartell7390 yes sir! I used the new bolts on the bottom, two per side, one spacer in each bolt.

  • @zman3776
    @zman3776 2 ปีที่แล้ว +2

    Where can i find the fog lights mounted to the inside fender of the F3 Limited?

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว +1

      Hello Zman, those are coming soon. Stay tuned! Thank you.

  • @adrienroget
    @adrienroget 2 ปีที่แล้ว +1

    Bonjour faites vous les expédition vers la france ?
    Car vos produit sont vraiment superbe

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว +1

      Bonjour, oui nous expédions en France ! Vous pouvez commander sur www.slingmods.com et vos frais d'expédition internationaux seront calculés au moment de votre commande. Merci!

  • @donnyharden7659
    @donnyharden7659 2 ปีที่แล้ว +1

    does this need a special switch to turn on all the new lights ??? I have ordered the light and wiring harness for my wife's 2020 F3 t ltd...

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว +1

      Hello Donny, thx for the order. No special switches. The Turn Signals activate with the factory turn signal lever. The Running Lights and Headlights are always on as long as the bike engine is on. Thank you.

  • @frederichartell7390
    @frederichartell7390 2 ปีที่แล้ว +2

    Bullet Connection from TricLED are not that great. I recommend changing them to something else!

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว +1

      Thanks for the feedback Frederic.

  • @bumblebeespyder1987
    @bumblebeespyder1987 2 ปีที่แล้ว +2

    Unfortunately illegal for the European market

    • @spyderlyf3
      @spyderlyf3 2 ปีที่แล้ว +1

      Why is that that?

    • @Slingmods
      @Slingmods  2 ปีที่แล้ว +3

      I'm curious as well.