ฝัง
- เผยแพร่เมื่อ 8 มี.ค. 2018
- Introducing the new 2 in 1 replacement LED fog light system for the Can-Am Spyder F3. These fog lights are completely plug and play using factory harnesses already on board your Spyder F3. Even if your F3 didn't come equipped with factory fog lights, the harness to power these will still be on board your Spyder. These fog lights have two LED systems integrated into one housing. The "C" shaped LED arc will run as a daytime running light and has been designed to mimic the F3 front shroud for a face lift that is sure to turn heads. The second is an LED fog light that emits a pure bright white light and includes an OE style push button dash switch to keep that factory Can-Am look.
This product is available here at SlingMods.com: www.slingmods.com/can-am-spyd... - ยานยนต์และพาหนะ
Thank you for making this video. After watching it, I purchased the lights for my new F3t from SlingMods. I watched the video a couple more times before doing the install. It was a piece of cake, and the lights work and look fantastic. Plus, I saved a bucketful of money. The dealer wanted well over $500 just for the Can Am lights, (With no led running lights). Hate to think what they would have charged for labor. The video showed me everything I needed to know to do the job.
Glad to hear it Gary! Thx for watching & thanks for the support!
Thank you
Do you know please if this kit will work with the 2024 model?
Do you have to worry about alignment of the fog lights for height?
It mounts to the fixed bracket from BRP, but the u shape bracket that is provided does allow for some up and down movement.
Does the fog light wire have to be plugged in on the right side
you leave out some crucial details. How do I know at what position to tighten the machine hardware holding the light assembly to the mount? I don't want to have to do a headlight alignment after the fact and discover that I need to disassemble the entire thing just to make the light show correctly through the opening. How do you orient the wiring for the light when bolting the entire light assembly into place? Is it inside or outside the fixed housing? Does it orient up or down, left or right (or doesn't it matter)? Where is the "main harness"? I wasn't given any instructions with my setup (but I did have to go and buy some of my own hardware since a few were missing, and a couple of the screws were pre-assembled for me in the one housing. These were apparently assembled with an air hammer because I had to force them apart only to find out that the threads were completely cross-threaded, forcing me to re-tap the holes and buy more hardware). I'll update you when I get this much figured out...
So after a lot of mentalling envisionment, I have the lights assembled (loosely) and bolted to the bike. I'm guessing we only need one of those connectors on the bike because they are bus connections and both fogs can run from one of them. I still don't have any idea how you align them properly. My guess is to hold one panel in place and square up the location of the light(?) Am I anywhere close?
another question - where does the relay box go?? I'd hate to have that bouncing around inside the bike under that console.
Hello Verde, if you need more elaborate assistance with an installation, we'd kindly ask that you submit a support ticket here at your convenience: www.slingmods.com/index.php?route=information/contact so that our team can assist you. Thank you!
Is it compatible for the European version?
Hello Richard, I know that in Europe this foglight is used as a driving light and the top as a high beam, but we honestly have not had a "European model" in house to be able to test compatibility with this product. My apologies.
Cool but they don't look that bright. Can you replace the bulbs with brighter ones?
Hello Jay, no the bulbs are not replaceable... but the bulbs included are quite bright. We have 111 reviews on this product here: www.slingmods.com/can-am-spyder-f3-arc-led-fog-light-kit-tricled
I'd encourage you to read through some of the reviews before purchasing so that you can make an informed buying decision. I pulled a couple quotes from some of our customer reviews here: "I couldn't believe how bright just the DRLs appear alone!", "Easy to install, bright lights, sharp OEM factory look (actually better than) and the value can’t be beat!", "Very bright lighting to see and be seen." Thanks!
How did you turn off the headlight when you riding?
We just unplugged them for the video so you could have a clearer shot of the Fog Lights.
please upgrade the video for 19 and above because they made a change in 19 and that nose clip is not as easy to remove
I hooked up these fogs light and only the drl works the entire light does not light up when u turn on the button...I have 2021 spyder f3 s special does anyone else have this issue
Hello Damian, we have a support team for assistance. It sounds like it may be the switch. Please be sure that all of the wires are firmly connected to the dash switch for the arc lights. If they are and it still is not performing properly.. please submit a trouble ticket and we'll get you taken care of. Thanks! www.slingmods.com/index.php?route=information/contact
My issue is the opposite. I received mine yesterday and installed it today. The DRL are not working but the main light works with the push of the button. 2019 Spyder F3S Special Series.
@@teamsankey560 Hello Team Sankey, please submit a trouble ticket to our support team and we're happy to walk you through resolution. You can submit a ticket here: www.slingmods.com/index.php?route=information/contact
Myself learning to fixing..
How much is this kit ?
Here's a link to the product page: www.slingmods.com/can-am-spyder-f3-arc-led-fog-light-kit-tricled Thanks!
$230 US
Looks so bad with the mix match head light color
Hey Butch - That's why we did this conversion :) Check this one here: th-cam.com/video/WonVnHhR13U/w-d-xo.html