In this video I demonstrate how to remove a bolt seized inside the sleeve of a bushing. This routine can be modified for a number of different purposes.
yes Sir! When you heat the bolt head to cut it off, try to place a solvent lube on the cooling head as the heat will draw it into the sleeve to help add lube to the bolt and help the draw-out process. I have an upper arm bushing where I broke the bolt and nut off of the 5/8 bolt and it will require the use of the inductive heating tool to get me out of my jam! DARN! Excellent video!
ALRIGHT! I watched your video last night. Got it done this morning. The parts arent even here yet! Thank You so much, it works. Wasn't sure what I was gonna do, had been soaking all of em with Kroil for a few days. Thank You Again Sir!
thank you. my grandfather was a mechanic. unfortunately he died the year I was born, and I never got to learn any of his mechanical wisdom. I am a masonry contractor, and my truck is out of order, a major disruption in my business. you may have just saved me some time and money, and, even better, you taught me a something I otherwise would not have ever thought of myself... thank you for taking the time to provide some knowledge to some young buck with a hard head but a willingness to learn!. I'm in ny, and holy hell, glad I learned to weld, because the spring shackle is the least of the worries. or, it should have been. lol
I'm used to working on 80's and newer cars but my father in-law picked up a 1960 Jeep Willys CJ-5 and we got stuck on the leaf spring bolts being stuck to the inner sleeves of the bushings. Just watched this video and it makes so much more sense now. Thank you! His Jeep isn't nearly as rusty but the bolts are clearly not clean enough to just let go.
You have no idea how much time and anger this saved me, I’ve been putting off the rear shackle lift on my project buggy thing for over a year because I could not get the bolts to break free, after this I had it done in under 4 hours, which is pretty fast compared to what I was expecting out of it. Thank you
LOL. Actually I think that I do have a pretty good idea of how much grief this routine has saved me countless times through the years. I'm glad that it helped you.
Thanks for the info. I used your method for bolt removal on my'05 Silverado shackles and it worked perfectly! The road salts are tough on frames here on Capecod. Again thank you.
I just went thru this on a car that I was replacing struts on... i eneed up using a sawsall on it and buying a new bolt. The Nut was welded to the subframe so this methoed was not an option. Then its drill old bolt out time.
I have a bolt just like this on my Suzuki GSXR750 (motorcycle) suspension...i've been wrestling with it for about 4 days and have managed to round off the end of the bolt. It's completely rusted inside of the bushing also but this technique has given me another option. I now have something to try again tomorrow. Thanks for showing this video and fingers crossed!
@@larryalexander4833 I have considered doing a video on just what penetrating oil does in a situation like this. Let's just say that it isn't as helpful as we would like it to be.
SUBSTANTIAL John Gillespie Thank you for sharing what you know with us great video Take care and have a great day John Gillespie From Nick Ayivor from London England UK 🇬🇧
I used a claw hammet on the head of the bolt after splitting the nut with a grinder. 97 rust belt ranger and I come up with this after hours of thinking and fighting.
I think you need to change the title of the video to "For advanced only" Try to do this without any fancy tools and on the floor on stands lol. I done it, it`s a pain in the ass but I got it out. it`s funny. I have seen many videos like this one but non of them without fancy tool. Do it like the old timers did it, then we can talk :)
I once had bolts that were so tight that I combined the ball joint press with this routine. I have also started drilling from the opposite side. I hate getting beat up by a bolt that is going into the trash.
There are times that replacing the bushing is necessary. I do have a tool kit specifically for that. It all comes down to what is in the customer's best interest, as well as the shop and technician's.
Sometimes, it helps to think outside the box. The other videos I've watched, the people were struggling trying to get the whole bolt out intact. These just need to be replaced. Don't cut corners to save a dime. You will regret it later
dude,it worked just did two on the spring,with my milwaukee 1/2 impact m18 volt,,everone should have a good impact and of course oxygen aceyeline torch
did it on a 98 2 door blazer,oh dont forget to remove the gas tank...lol....i was changing the fuel pump and change all your lines,get from (gas tank renu)...easy...oh THANK YOU
If the bolts come right out, and the threads for the nut are in good shape then there is no reason to not reuse them. When the bolts are seized like they were on this truck you could spend hours trying to save them so it's better to just replace them.
@@thecardoc100 I mistyped my comment, i meant why save the bushing? I just finished the vid and you addressed that scenario at the end though🙂. I know when i do my 04 wrangler control arms(probably originals, getting too rusty soon) im sawzalling those right out and using new bolts. Time, money, effort, i will buy $50 of hardware to save hours(8 control arms, 16 bolts, 16 nuts)
@@thecardoc100 Also curious about an idea for stuck bolts in bushing sleeves. I saw a vid on removing stuck exhaust manifold studs by using jumper cables and a car battery, one lead on bolt welded to stud, ground on head in nearby spot. It got bolt very hot very fast without flame and broke free the corrosion bond between bolt and alluminum head. Maybe it would work to free rust bond inside a bushing sleeve, not sure, but someone should try it. Would have to be careful not to use too much heat. As there would be no flame im thinking it could maybe work without ruining a bushing, probably not but you never know till you try.
If the bushings are still usable it saves both cost for the parts as well as the additional labor to replace them for the customer. The ten minutes that were spent removing all four bolts this way worked out to about a $200 savings for the vehicle owner.
@@thecardoc100 This guy's method makes me think the method i proposed would work great. th-cam.com/video/NtcctK2fL3Y/w-d-xo.html This is the jumper cable trick. th-cam.com/video/cUlJ5f2-FcQ/w-d-xo.html
Ugh. This worked partially for me :/ The bolt came about a quarter way out then the bushing started to spin. Gonna try a 30lb jack hammer on it if that doesn't pound it out i guess i'm finding someone with a cutting torch.
Unfortunately there are some occasions that the rubber bushing is just too weak to survive and it has to be replaced. Some things we can do to increase our chances of success are to have as much of the shackle still in place, it's added mass takes some of the stress from the impact gun off of the bushing. For extremely tight bolts you can try to start drilling it out. This both shortens the length of the bolt that has to be pulled out by the nut and weakens the bond between the bolt and the sleeve.
Yes sir! The fact that I was able to get it a quarter of the way out was a success in my book :) Them bolts have been in there for 23 years. First time they've ever been touched. They're coming out come hell or high water ; ) Thanks for the reply!
In order to pull, you have to have something to push against don't you? Of course it is pulling the bolt out, the piece of the old shackle is what the puller has to press on in order to get the bolt to come out of the sleeve.
Two almost 3 minutes of exercising it..? Holy shit I've been stuck on mine for about an hour and a half.. the sleeve is siezed and it's turning in the bushing..
Sometimes they just won't come apart. Keeping some of the old shackle between the nut and the sleeve can help prevent the sleeve from breaking loose of the bushing but once the sleeve has loosened it is likely time to consider replacing the bushing.
If it isn't seized to badly a tool like a ball joint press can work. The one thing that you want to avoid is pushing the steel sleeve out if the bushing with the bolt. Once the bonding of the sleeve to the bushing fails you would need to replace the bushing.
Don't you run the risk of cooking the rubber inside the bushing using a torch instead of a cutting wheel to cut the bolt head off? And spraying a red hot piece of metal with water could end up tempering the steel of the frame shackly, making it brittle and causing it to possibly crack and fail? Just asking for a friend!
Rust is a good insulator so the heat is very slow to conduct to the bushing. As far as being concerned about changing the temper of the metal, every. Piece of metal that is truly subjected to sufficient heat that changing it's temper might be a concern is heading to the trash once this is taken apart.
yes Sir! When you heat the bolt head to cut it off, try to place a solvent lube on the cooling head as the heat will draw it into the sleeve to help add lube to the bolt and help the draw-out process. I have an upper arm bushing where I broke the bolt and nut off of the 5/8 bolt and it will require the use of the inductive heating tool to get me out of my jam! DARN! Excellent video!
ALRIGHT! I watched your video last night. Got it done this morning. The parts arent even here yet! Thank You so much, it works. Wasn't sure what I was gonna do, had been soaking all of em with Kroil for a few days. Thank You Again Sir!
thank you. my grandfather was a mechanic. unfortunately he died the year I was born, and I never got to learn any of his mechanical wisdom. I am a masonry contractor, and my truck is out of order, a major disruption in my business. you may have just saved me some time and money, and, even better, you taught me a something I otherwise would not have ever thought of myself... thank you for taking the time to provide some knowledge to some young buck with a hard head but a willingness to learn!. I'm in ny, and holy hell, glad I learned to weld, because the spring shackle is the least of the worries. or, it should have been. lol
Great info!! Prepping to do the same on my own truck. Guys who post great videos like this are real heros.
I'm used to working on 80's and newer cars but my father in-law picked up a 1960 Jeep Willys CJ-5 and we got stuck on the leaf spring bolts being stuck to the inner sleeves of the bushings. Just watched this video and it makes so much more sense now. Thank you! His Jeep isn't nearly as rusty but the bolts are clearly not clean enough to just let go.
You have no idea how much time and anger this saved me, I’ve been putting off the rear shackle lift on my project buggy thing for over a year because I could not get the bolts to break free, after this I had it done in under 4 hours, which is pretty fast compared to what I was expecting out of it. Thank you
LOL. Actually I think that I do have a pretty good idea of how much grief this routine has saved me countless times through the years. I'm glad that it helped you.
This was the trick I needed for my 2003 S10 zr2 pickup rear spring shackles! THANKS
Thanks for the info. I used your method for bolt removal on my'05 Silverado shackles and it worked perfectly! The road salts are tough on frames here on Capecod. Again thank you.
OMG !!!! So glad I seen this video before doing mine. Worked gloriously!!!!! Only difference was I used a grinder. Thank you Sir!
I'm going to have to try this out next time i get a seized bolt. Never thought about doing something like this, INGENIOUS! Thank you for showing this!
This tip works great, used it twice on the same truck. Thanks
I just went thru this on a car that I was replacing struts on... i eneed up using a sawsall on it and buying a new bolt. The Nut was welded to the subframe so this methoed was not an option. Then its drill old bolt out time.
The holy grail of rusted bushing bolt videos. Thank you !
This video should have a million views...
I have a bolt just like this on my Suzuki GSXR750 (motorcycle) suspension...i've been wrestling with it for about 4 days and have managed to round off the end of the bolt. It's completely rusted inside of the bushing also but this technique has given me another option. I now have something to try again tomorrow. Thanks for showing this video and fingers crossed!
Try some aero kroil penetrating oil.
@@larryalexander4833 I have considered doing a video on just what penetrating oil does in a situation like this. Let's just say that it isn't as helpful as we would like it to be.
appreciate the ideas gotta pull a couple stubborn bolts out to replace shackles on 98 explorer
I owe you a beer! Totally worked!
SUBSTANTIAL John Gillespie
Thank you for sharing what you know with us great video Take care and have a great day John Gillespie
From Nick Ayivor from London England UK 🇬🇧
Good tips, that's because few years of rusty bolts, jajajaj, great work and hope to see more videos like this, God bless you
Thanks for the info, been fighting them on my truck, I'm replacing rear springs and hopefully this will help. Thanks!
That is the only sound and relayable way, it works! thank you very much!
You saved my behind with this trick!!!.... thank you so much for posting this video!!!
I used a claw hammet on the head of the bolt after splitting the nut with a grinder. 97 rust belt ranger and I come up with this after hours of thinking and fighting.
Just did both sides on my box truck today. Needless to say, my knuckles have about 6 weeks healing now…….
Very nice sir he did help me thank you
How much cost?
Very cool trick
I think you need to change the title of the video to "For advanced only" Try to do this without any fancy tools and on the floor on stands lol. I done it, it`s a pain in the ass but I got it out. it`s funny. I have seen many videos like this one but non of them without fancy tool. Do it like the old timers did it, then we can talk :)
I tried something slightly similar but using a ball joint pusher, it just bent the tool. Will have to give your method a try as a last resort.
I once had bolts that were so tight that I combined the ball joint press with this routine. I have also started drilling from the opposite side. I hate getting beat up by a bolt that is going into the trash.
Thanks for the idea and the video John.
Thanks a bunch!
I'm goin 2 try this right now
With a porta power it pushes the bushing an bolt out
There are times that replacing the bushing is necessary. I do have a tool kit specifically for that. It all comes down to what is in the customer's best interest, as well as the shop and technician's.
Excellent video. Will definitely be trying this next time.
Sometimes, it helps to think outside the box. The other videos I've watched, the people were struggling trying to get the whole bolt out intact. These just need to be replaced. Don't cut corners to save a dime. You will regret it later
Don't they call that 'penny wise ... dollar foolish'?
@@kenc.9067 How 'bout spending a little now. Or a lot later.
@@HoUsEoFcAtS78 I agree
dude,it worked just did two on the spring,with my milwaukee 1/2 impact m18 volt,,everone should have a good impact and of course oxygen aceyeline torch
did it on a 98 2 door blazer,oh dont forget to remove the gas tank...lol....i was changing the fuel pump and change all your lines,get from (gas tank renu)...easy...oh THANK YOU
Thanks for the kind words. I'm glad it helped.
For me this isn’t an issue. Since mine just split completely in half lol. Now I just can cut the bolt out
Cool trick. You think it will work in lower control arms and other suspension parts that seize in bushings?
As long as you aren't dealing with a bolt that has a step (larger diameter) on it then yes it can work on a number of different situations.
Great idea and well demonstrated. But why is it so rusty in the first place?
Road salt in the winter causes all kinds of corrosion issues. It's pretty much normal for the rust belt.
Lol from Ohio
Awesome video, thank you
I wish I had protected my ears all of these years. I'm only 47 and the non-stop ringing drives me crazy sometimes.
All this to save an old spring bushing?
If the bolts come right out, and the threads for the nut are in good shape then there is no reason to not reuse them. When the bolts are seized like they were on this truck you could spend hours trying to save them so it's better to just replace them.
@@thecardoc100 I mistyped my comment, i meant why save the bushing? I just finished the vid and you addressed that scenario at the end though🙂. I know when i do my 04 wrangler control arms(probably originals, getting too rusty soon) im sawzalling those right out and using new bolts. Time, money, effort, i will buy $50 of hardware to save hours(8 control arms, 16 bolts, 16 nuts)
@@thecardoc100 Also curious about an idea for stuck bolts in bushing sleeves. I saw a vid on removing stuck exhaust manifold studs by using jumper cables and a car battery, one lead on bolt welded to stud, ground on head in nearby spot. It got bolt very hot very fast without flame and broke free the corrosion bond between bolt and alluminum head. Maybe it would work to free rust bond inside a bushing sleeve, not sure, but someone should try it. Would have to be careful not to use too much heat. As there would be no flame im thinking it could maybe work without ruining a bushing, probably not but you never know till you try.
If the bushings are still usable it saves both cost for the parts as well as the additional labor to replace them for the customer. The ten minutes that were spent removing all four bolts this way worked out to about a $200 savings for the vehicle owner.
@@thecardoc100 This guy's method makes me think the method i proposed would work great. th-cam.com/video/NtcctK2fL3Y/w-d-xo.html This is the jumper cable trick. th-cam.com/video/cUlJ5f2-FcQ/w-d-xo.html
i like that alot ,neet trick i will give a try,thanks
Ugh. This worked partially for me :/ The bolt came about a quarter way out then the bushing started to spin. Gonna try a 30lb jack hammer on it if that doesn't pound it out i guess i'm finding someone with a cutting torch.
Unfortunately there are some occasions that the rubber bushing is just too weak to survive and it has to be replaced. Some things we can do to increase our chances of success are to have as much of the shackle still in place, it's added mass takes some of the stress from the impact gun off of the bushing. For extremely tight bolts you can try to start drilling it out. This both shortens the length of the bolt that has to be pulled out by the nut and weakens the bond between the bolt and the sleeve.
Yes sir! The fact that I was able to get it a quarter of the way out was a success in my book :) Them bolts have been in there for 23 years. First time they've ever been touched. They're coming out come hell or high water ; ) Thanks for the reply!
Not a Press...It Is a Puller!!
In order to pull, you have to have something to push against don't you? Of course it is pulling the bolt out, the piece of the old shackle is what the puller has to press on in order to get the bolt to come out of the sleeve.
Two almost 3 minutes of exercising it..? Holy shit I've been stuck on mine for about an hour and a half.. the sleeve is siezed and it's turning in the bushing..
Sometimes they just won't come apart. Keeping some of the old shackle between the nut and the sleeve can help prevent the sleeve from breaking loose of the bushing but once the sleeve has loosened it is likely time to consider replacing the bushing.
Great informative video! 👍👍👍
Could you use a pulley puller to remove the bolt?
If it isn't seized to badly a tool like a ball joint press can work. The one thing that you want to avoid is pushing the steel sleeve out if the bushing with the bolt. Once the bonding of the sleeve to the bushing fails you would need to replace the bushing.
Thumbnail looks like alligator eye 👁
Great tips. Big 👍 76
Stay safe, Joe Z
What's the difference between seized and rusted. A cutting torch. HaHa
P00
Don't you run the risk of cooking the rubber inside the bushing using a torch instead of a cutting wheel to cut the bolt head off? And spraying a red hot piece of metal with water could end up tempering the steel of the frame shackly, making it brittle and causing it to possibly crack and fail? Just asking for a friend!
Rust is a good insulator so the heat is very slow to conduct to the bushing. As far as being concerned about changing the temper of the metal, every. Piece of metal that is truly subjected to sufficient heat that changing it's temper might be a concern is heading to the trash once this is taken apart.