nice vid, really detail review! but I still have a question, besides the presets in the mobile app, can the LEDs be configured maybe by beta-flight or some other software? for example, I want the LED at 1cm-2cm to be green, and the LED from 2cm-3cm to be red, and the LED from 3cm-4cm blinking white...... just an example, I never use any LED before, and I think if I equip a LED, I want it customized. Thanks!
yes it is possible! I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad via default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-)
@@KremerFPV yes it is possible! I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad via default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-)
you can use this wire by default to bring the FC into boot mode. but you can also use this cable to switch between modes when you connect this wire to an rx or tx or any other PinIO compatible pad to control the meteor via your remote!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Fantastic review, Gal! 😃
Really nice looking LEDs!
Stay safe there with your family! 🖖😊
And happy holidays!
Thanks Mario, Happy holidays!
Put one of these on my Flex 25, looks awesome.
nice vid, really detail review! but I still have a question, besides the presets in the mobile app, can the LEDs be configured maybe by beta-flight or some other software? for example, I want the LED at 1cm-2cm to be green, and the LED from 2cm-3cm to be red, and the LED from 3cm-4cm blinking white...... just an example, I never use any LED before, and I think if I equip a LED, I want it customized. Thanks!
Thank you. I think that someone commented on my video and said that it's possible. Let me know if you still need help with that.
Can I know how much flight time would be reduced approximately with the 4s 1000mAh? I know this sounds stupid but I’m new to this hobby😅
Is it possible to install these LEDs on the DJI AVATA?
Great looking LEDs can you make it Certain colors on the front of the drone and different in the back at the same time
Yes as far as I know it's possible - although I didn't try editing the preset options.
Wonder if this can be used on a dixed wing??
Thanks
Sure :-)
can be switch on and off from a switch on the transmitter?
Good question. As far as I can remember, no.
yes it is possible! I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad via default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-)
@@KremerFPV yes it is possible! I found out by chance when I mounted the Meteor on my BetaFPV Pavo20 is (because there is already a plug with +/- and a third line on a TX pad via default and configured PinIO function), if you solder that yellow cable which is soldered to the Meteor chip on the boot pad by default, e.g. to an RX or TX pad on the FC and then operate the whole thing using PinIO via a button on the remote control, then you can also switch through the different lighting modes without pressing the hardware button on the chip or changing it via the app.. like that You can also change the modes during the flight... or if you hold down the button on the remote control for a few moments you can also switch it on and off! ;-) I already wrote this to Speedybee and they didn't even know about this feature! ;-)
@@p_fpv great, thanks for the update!
@@p_fpv What did you have to do to make a switch select the modes?
If im attaching this to a DJI AVATA do I need the yellow wire?
No, but how do you plan to power it up?
@KremerFPV I was able to get it done. It's beautiful. I put a lipo battery one top.
Looks really cool!!!
It does!
Why you connect boot wire in fc that yellow wire can you tell me
you can use this wire by default to bring the FC into boot mode. but you can also use this cable to switch between modes when you connect this wire to an rx or tx or any other PinIO compatible pad to control the meteor via your remote!
Красиво
Very sick!
:-)
Nice