Nicely done. I think I may enjoy the simplicity of the opening mechanism more than the original. (Sorry Dustin) A trick with routing out a large section like that is to start in the middle and work your way out. Setup guide blocks inside your end goal size for the router to rest on, then remove them as you work towards the final exterior wall.
You would be correct. I don't know shit about it . I just seen a couple peaces move and was heading towards the car. I Wasn't being a asshole about it. I was just curious. Woodworking is not my greatest. I wish I had the mindset to make stuff like that with wood. But sadly I'm just good at working on trucks and cars. I do admire the work you did. I love me a puzzle box or a box with a hidden compartment or drawer. I have a wooden box that has 5 slots going through it and you have to figure out the correct pattern to get it open. I wish is was made out of good real wood like your box but it's made from that cheap shit. Idk what it's called. But it's still a ok box. It will never last as long as your box. Ok I'm gonna shut up bc if not I will talk your head off about this stuff. I'm interested in it but just can't get the nack of it.
Sweet build ! you put that Dewalt table saw through its paces ! i ran a Architectual Woodworking Company Installation Division for 20 years and it got to the point that i only liked the Dewalt job site or portable TableSaws out on the jobs for the Installers most of all the other brands are real junk and don’t hold up to the job conditions plus the Dewalt has a better Fence and some other features Although as I get older i’m more of a Sawstop guy
Nice build! I’ve seen a ton of variations of my SCB but I’ve never seen anyone go with a lid like that. That paduak should be hard enough to resist any major wood movement so I don’t think it’ll cause any problems. Keep it up!
Generally, the wood comes from trees, but if you don't have access to trees, you can google "lumber supply" in your area (just not the big box stores). Or, try craigslist, FB marketplace, eBay,
@@act2.533 yeah I don't have access to trees or any sort of mill to even be able to make boards from trees. I didn't know if there was a national store or carrier of specialty wood like this
Unfortunately no, there isn't a chain store, you are at the mercy of what's available and what price they want to charge based on your area. I have places close to me, but the best material and price is about an hour drive.
That's a good looking box! You got mad skills! But I would recommend that you do some maintenance on that crosscutting sled. That should slide easily on the table, yours was sticking like crazy. That could comprise some of your cuts or even hurt you if it breaks. Food for thought, great vid anyway!
I have that same saw and every sled I build sticks like crazy, even with waxing. I think it’s the idiotic textured powder coat that DeWalt uses on the table. It’s really designed for cutting 2x4s on a construction site, but the cost and portability are hard to beat for a small home shop....
Sou apaixonado por ferramenta principalmente marcenaria . Eu acho muito bonita essa profissão . Pense numa bancada completa. Queria poder que eu compraria
@@TheTranq Oh, you're the OP, so you're serious. Wow. Start watching at 0:30 and watch your push stick. Notice how the edge closest to the blade is raising? That's b/c you are pulling the board toward you and pushing down to try and keep it in the path of the blade, while sliding your work piece sideways. Very bad practice using a table saw in this manner. Also, it is called a push stick (or block, enter your choice of shape here) not a slide it sideways stick, because you should be pushing through the blade. You have been lucky so far, but you may want to learn about how kickbacks can happen.
@@SupposedlyFree Watch my videos do you really think I don't know how a push stick works? If you think a certain technique is dangerous then don't do it. I feel completely safe performing this cut for miters
Respect to your handyman ship although I didn't find the secret compartment is that secret...XD... maybe your first attempt thickness made more sense...
Have you noticed how carpenter TH-camrs get on your nerves by using all kinds of professional tools but when it comes to screwing a screw they use a regular hand screw driver!!??
The Irony: I like these ideas a lot _BUT_ *do not* like this video where you show all the *_home invaders & robbers_* exactly where to find your _now_ not so hidden compartments. Does this not defeat it's whole aim of no one knowing where your stuff is? This is a very unwise video.
@@котучёный , Да, если знать что там брюлики). А если ничего не бултыхается? Конечно, можно догадаться по толщине дна, что там их два, если есть время разглядывать. Такой секретик не от воров - воры и шкатулку унесут...
@@котучёный , интереснее найти Как открывается. Головоломка ) пс: хочу освоить ещё одно ремесло - вот и смотрю-учусь на таких видео-уроках. Видел шкатулку, у которой на крышке нужно сдвигать реечки в определённой последовательности, типа как игра "Пятнашки".
dude really? do you think we didnt see all those major mistakes u made? why didnt you fix them? Lazy! It couldve rode all Shiney and Chrome on the Fury Road, instead it was just Mediocre! (for real man i was just teasin ya, its pretty damn cool)
i know man, i was just messing around with ya man cause i wanted to see u go back and fix those. lol! you actually did a pretty bang up job. ill give u props dude. high five for real!
There are actually many good tips you could pick up by watching but it sounds like you'd rather just complain. Ever heard of Jimmy Diresta? Same video style and he is doing just fine
Great display of how to safely work with a table saw while cross cutting nice work man
Very clever. 2022. still holds up.
I really like the simplicity of your compartment design. Easier to open and less parts that might break or fail.
Thank you! Yes it seems to work just as effectively as the original design as well
Love it. If I was to take any valuables from your house I would take this box and the stash would be a bonus lol.
Hello friend, interesting secret box, I wonder what kind of orange wood it is? Thanks in advance for your reply.
Cherry and pauduk!
Nicely done. I think I may enjoy the simplicity of the opening mechanism more than the original. (Sorry Dustin)
A trick with routing out a large section like that is to start in the middle and work your way out. Setup guide blocks inside your end goal size for the router to rest on, then remove them as you work towards the final exterior wall.
Wonderful to watch!
Nice work. What is that orange wood? It's beautiful.
Thanks! It's bubinga!
I wanna know how many peaces of wood hit the res car when cutting the miters
Clearly you haven't cut many miters there's no strain between the blade and the fence
You would be correct. I don't know shit about it . I just seen a couple peaces move and was heading towards the car. I Wasn't being a asshole about it. I was just curious. Woodworking is not my greatest. I wish I had the mindset to make stuff like that with wood. But sadly I'm just good at working on trucks and cars. I do admire the work you did. I love me a puzzle box or a box with a hidden compartment or drawer. I have a wooden box that has 5 slots going through it and you have to figure out the correct pattern to get it open. I wish is was made out of good real wood like your box but it's made from that cheap shit. Idk what it's called. But it's still a ok box. It will never last as long as your box. Ok I'm gonna shut up bc if not I will talk your head off about this stuff. I'm interested in it but just can't get the nack of it.
Sweet build ! you put that Dewalt table saw through its paces ! i ran a Architectual Woodworking Company Installation Division for 20 years and it got to the point that i only liked the Dewalt job site or portable TableSaws out on the jobs for the Installers most of all the other brands are real junk and don’t hold up to the job conditions plus the Dewalt has a better Fence and some other features Although as I get older i’m more of a Sawstop guy
Its worked great for years! Thanks for watching
@@TheTranq what happened to the guard over the saw blade, very dangerous not to have one
Great project! Thanks for posting it. Subscribed!
Great looking box!
th-cam.com/video/ZbrFNQIuHn0/w-d-xo.html
👏👏👏👍 good idea good work
After watching Dustin Penner's video TH-cam suggested this one for me. Well, don't mind if I do because I
Nice build! I’ve seen a ton of variations of my SCB but I’ve never seen anyone go with a lid like that. That paduak should be hard enough to resist any major wood movement so I don’t think it’ll cause any problems. Keep it up!
Hack
En Que Pais Es Esto ??? Me Hacen Favor Me Dicen ??? Gracias.. Desde COLOMBIA.......
Bonjour
Great job !! greetings from Uruguay
Damn you wasn't kidding about not liking the bottom and making it bigger. Lol holly shit that box is gonna be heavy
This might be a stupid question but I'm new to wood working and want to know where to get wood like this and others like walnut?
From trees
@@robertburns8218 no need to be an idiot
Generally, the wood comes from trees, but if you don't have access to trees, you can google "lumber supply" in your area (just not the big box stores). Or, try craigslist, FB marketplace, eBay,
@@act2.533 yeah I don't have access to trees or any sort of mill to even be able to make boards from trees. I didn't know if there was a national store or carrier of specialty wood like this
Unfortunately no, there isn't a chain store, you are at the mercy of what's available and what price they want to charge based on your area. I have places close to me, but the best material and price is about an hour drive.
What did you put in that drawer to make it so black?
It is called flocking
I wish i had all those nice tools
Essa artes ficou lindo meus parabéns
Drilling towards your own hand,,,,how brave !
Drill press
Amazing !!!
Ever considered a nice miter saw?
What kind of wood is that orange color you used for the top and the bottom of the box
I believe it was bubinga. Thanks for watching
I was scared I might be colour blind until I saw your comment.😆 Bubinga is native to which part of the world???
where did you get the spring from?
That's a good looking box! You got mad skills! But I would recommend that you do some maintenance on that crosscutting sled. That should slide easily on the table, yours was sticking like crazy. That could comprise some of your cuts or even hurt you if it breaks.
Food for thought, great vid anyway!
Appreciate it. Yes my cross cut sled got really sticky by the end of the summer looking for a solution for that
I have that same saw and every sled I build sticks like crazy, even with waxing. I think it’s the idiotic textured powder coat that DeWalt uses on the table. It’s really designed for cutting 2x4s on a construction site, but the cost and portability are hard to beat for a small home shop....
this is awsome, you are a real craftsman
Appreciate it man always working on improving
This is awesome! Would you mind sending me the plans?
Do you have an email I can send it to?
@@TheTranq winterscheidte@gmail.com Thank you so much!
May I also have a copy of the plans. Star1ez54@yahoo.com
@@TheTranq lukasz3131@gmail.com
Belo trabalho.
Sou apaixonado por ferramenta principalmente marcenaria . Eu acho muito bonita essa profissão . Pense numa bancada completa. Queria poder que eu compraria
0:30 Cutting like that you're asking for a kickback, at least you have the car as a backstop.
There are no dangerous cuts in this video
@@TheTranq not sure if this is the perfect example of Poe's law or not...
@@SupposedlyFree There is plenty of surface to reference and am cutting a miter absolutely no danger of kickback
@@TheTranq Oh, you're the OP, so you're serious. Wow. Start watching at 0:30 and watch your push stick. Notice how the edge closest to the blade is raising? That's b/c you are pulling the board toward you and pushing down to try and keep it in the path of the blade, while sliding your work piece sideways. Very bad practice using a table saw in this manner. Also, it is called a push stick (or block, enter your choice of shape here) not a slide it sideways stick, because you should be pushing through the blade. You have been lucky so far, but you may want to learn about how kickbacks can happen.
@@SupposedlyFree Watch my videos do you really think I don't know how a push stick works? If you think a certain technique is dangerous then don't do it. I feel completely safe performing this cut for miters
Profissional muito bom mesmo 👏👏👏
I try this thanks
Awesome dude
Thank you for a new idea
Você e muito inteligente, parabéns ficou perfeito
Nice work!
Absolutely love it!
Kkkjh
And also what are the metal sticks you useds for the secret compartment?
Any blueprints?
I can post drawings today
TheTranq Thank you.
beautiful work, like 👍
Absolutely a good work.
Thanks I appreciate it!
amigo the tranq usted hizo algo para usted no para en canal sus seguidores
Muy bonito trabajo, lástima que se muestre en cámara rápida lo que no permite ver detalles
Where are the plans for this specific box? Thanks!
Scott Van Note I can send you an email with the ones I made otherwise Dustin Penner sells them on his website!
TheTranq Thank you Very much. Wrkn4Jesus777@hotmail.com. Have a wonderful Thanksgiving.
Scott Van Note No problem I will send what I have after the Thanksgiving break and you as well!
Scott Van Note No problem I will send what I have after the Thanksgiving break and you as well!
Can I get a copy?
Respect to your handyman ship although I didn't find the secret compartment is that secret...XD... maybe your first attempt thickness made more sense...
Interesting. Do you think it wasn't secret because of the thickness of the trim then?
cool
très beau
👏👏👏👏very good
I dont get the high speed videos. why do them at all
So you can actually see the whole process without a 50 minute video
CON LA MOLLA! HAAA,HAA :)
great audio if you like saws -- too bad no spoken words
My new videos have voice overs!
Cuanto cuesta la cajita 😆
projeto muito bacana
Have you noticed how carpenter TH-camrs get on your nerves by using all kinds of professional tools but when it comes to screwing a screw they use a regular hand screw driver!!??
What’s going on!!!
Y Si Pagan Tanto Trabajo ALLÁ ??? X Que Aquí En Colombia Quieren Todo Regalado.......
думаю тайник можно было сделать из фанеры. столько расходов. а в целом класс
All that brand new, top of the line equipment.....just for a highschool project.
Nice
@@TheTranq ...thanks 👍
@@nayosilver1180 why don't you post some of your builds then
Too fast and furious for me...cant tell half of what he's doing....
Nice design though
Looks too nice so thieves will take the whole box!!
عمل رائع و متقن .
Mucho trabajo para un simple alajero..
👏👏👏👏👏👏
Super
Классно!! 👍
отлично!
Делает гроб для Дональда Трампа👍👍👍👍👍
Отлично. 👍
buenooooo
Такую будку соорудить чтобы там лежала маленькая цепочка 🤦
Naic god
Eres bueno, eres muí bueno..
Muy peligroso cortar en ángulo ubicandose a un costado de la maquina
nice box, but I cringed when I saw you turning all that paduak into sawdust.
Would love to see someone make this with hand tools none of these fancy tools that do the job for you 😂
رؤؤؤؤعه
Sto se Covjek namuci a kod Kineza ovako nesto 5 eura doduse plastika
The Irony:
I like these ideas a lot _BUT_ *do not* like this video where you show all the *_home invaders & robbers_* exactly where to find your _now_ not so hidden compartments.
Does this not defeat it's whole aim of no one knowing where your stuff is?
This is a very unwise video.
Плохой тайник. Стоит потрясти шкатулку и сразу понятно, что внутри что то есть.
поролон, мешочек для брюликов, чтоб не бултыхалось.
Тут интереснее найти Как открывается, а не Что внутри )
@@2012PACCBET если внутри брюлики- открывается ударом об пол. Весь смысл в секрете.
@@котучёный , Да, если знать что там брюлики). А если ничего не бултыхается? Конечно, можно догадаться по толщине дна, что там их два, если есть время разглядывать.
Такой секретик не от воров - воры и шкатулку унесут...
@@2012PACCBET а от кого?😮
@@котучёный , интереснее найти Как открывается. Головоломка )
пс: хочу освоить ещё одно ремесло - вот и смотрю-учусь на таких видео-уроках. Видел шкатулку, у которой на крышке нужно сдвигать реечки в определённой последовательности, типа как игра "Пятнашки".
dude really? do you think we didnt see all those major mistakes u made? why didnt you fix them? Lazy! It couldve rode all Shiney and Chrome on the Fury Road, instead it was just Mediocre! (for real man i was just teasin ya, its pretty damn cool)
Mistakes are how you learn
i know man, i was just messing around with ya man cause i wanted to see u go back and fix those. lol! you actually did a pretty bang up job. ill give u props dude. high five for real!
Мавзолей не иначе, или урна для праха.
🙄
My goodness, that box is ugly
Nice! Why don't you post a video then?!
Zenginlik başka şey adam alet koleksiyonu yapmış baksana dewalt in bütün aletleri var adamda ..o kadar aletle yaptığı işe bak bide ...
Looks like dewalt has all the tools, man, look what he does with his dick ... Translation: Not a good comment dude
Just entertainment no learning here. move on
There are actually many good tips you could pick up by watching but it sounds like you'd rather just complain. Ever heard of Jimmy Diresta? Same video style and he is doing just fine