I had this exact issue and was quoted £130 and a 4 week waiting time by a local vacuum repair shop. I bought the part for a few quid on eBay, and following this guide, was able to complete the replacement myself in about an hour! Thank you for this video! For anyone else trying this I would highly recommend having good tools for it, such as the long screwdrivers with decent handles on them in the video, I had to muddle through with some cheap tools which made it much harder (but still doable!).
You`re welcome. I`m glad it helped. For sure you will need good tools, especially for the torx screws (T8). I also uploaded a new video (3 ways to fix the broken trigger issue). Is more detailed and gives you more options to solve this issue.
Thank you so much! I had the same issue with my V10, so I 3D printed a new trigger part and followed your video. The Dyson works great and more importantly the wife is happy!
Thank you for your video, I was able to repair my v10 thanks to you ! It's great that you are talking us through the steps, most videos will only show us and put a little music.
Thank you so much for this video. I ordered a replacement kit incl two long screwdrivers on Aliexpress. There wasn't a manual. Because of this video I was able to complete the replacement on mine Dyson V11. This video is superrrrrrrrrrr 👌👌👌👌👍👍👍
Excellent video!! I just finished replacing my trigger after following this video. My trigger was broken in the exact same place as yours. Got the part and the toolkit from Amazon, and, after a week, I'm vacumming again. Thank you so much. Your video it's been very helpful.
January 2025. Thanks, just completed the replacement in 90 minutes following this. No problem, and my Dyson V10 didn’t have the silicon protection on the board. The plastic trigger was broken in such a way it prevented a direct pull-out, so I had to break and prise it out through the trigger hole. Replaced with a steel version, a little smear of Vaseline helped get the new trigger over the pins.
thank you for making this video and helping us guide us through this process. could not have done it without your help. wishing you all the luck and love and kindness in this universe
First off, I never comment on videos, so I hope that shows how appreciative I am 🤣. My dad never really fixed anything growing up (maybe cause they didn’t have TH-cam back then lol). Thanks to your video, my Dyson lives.
Great video, thanks a million, you’re 100% right they don’t make it easy to take them apart ! But you definitely do ! Dyson much like other manufacturers seem to put hi usage parts in their appliances, made of plastic, probably hoping when it breaks you’ll go buy a new one ! Thanks again 😄
Thank you so much.. orderer the piece from amazon 9euro.. hard to dissemble and reassemble but very very well explained and showed. Be gentle and sort every screw different from the other. Thanks for saving me 200euro:)
Thanks! My switch wasn’t broken or cracked but apparently just flimsy enough to not always work. Bought a replacement switch that was much stronger plastic and now it works as soon as you start to pull the trigger rather than after squeezing it all the way down and still not working sometimes
Muchas gracias. En Dyson me dijeron que tenia que cambiar toda la pieza y me dieron un presupuesto de 119 euros. Me comunicaron que la pieza se había agotado y me animé a arreglarlo yo siguiendo el tutorial. ¡arreglado por 12 € con destornilladores incluidos en el precio.
Fantastic! Just did it. You better are equipped with good tools to do it. Specially almost at the end of the dissembling you need a torx T9 (as before) but long and thin. Also a flexible adapter to reach some torx T9 as angle and space is minimum, this T9 is a must
thanks for the help. I was confused with the trigger when re assembling it as it wasn't springing out to the off poison until I saw you slide the battery back in place then it was all clear. the other thing I had trouble with was power leads connecting to the motor. After bending then up to get them out I found it difficult to get correct angle without putting a lot of pressure on the housing which I ended up doing.
I'm glad I could be of help. Yes, some operations can cause problems. The important thing is that you managed to get over it and the vacuum cleaner is functional again.
Hello thank you very much, this video will help me a lot, my V11 has had this problem for a few days, so I'm going to buy a reinforced model, and change it Thank you very much, it's very well explained!
I bought the new part (reinforced) because the original part is thin and I think it's just right and it will break in time, so finally, yesterday I did the assembly, disassembly, and replacement of the defective part with your video, and frankly nickel, I'm delighted, it was rather fast and it is working again Thank you, it helped me a lot
Great video, thanks for uploading. A fiddly job for sure, but worth the effort for the money saved. I found a PZ1 and a long reach Torx T8 screwdriver to be perfect for this.
The old trigger piece did not look bad but the pivot holes were worn and elongated a very little bit, but it fixed the problem. Can't believe it was designed to be so critical..
Thank you for the helpful video! Unfortunately, the display no longer turns on and the vacuum cleaner is pulsing. Could you please let me know what I might have done wrong?
Great Vid, followed it for my V11 which was slightly different. Only problem I face now is after putting it all back together and sticking the battery in, is it turns on and stays on, from what I've read elsewhere its because i didn't push the trigger mechanism high enough or the new trigger is slightly longer - not sure. But people typically file down the black trigger button on the battery and it fixes this issue. So will have to do that.
Огромное спасибо за это видео! Благодаря вашему видео я смог легко поменять курок пылесоса! Все было снято очень подробно и четко! Это мне очень помогло! Спасибо!
Did you figure this out? I'm having the same problem. I have the white panel open, and I'm trying to avoid disassembling the next part which was tricky. When the battery is in, it feels like the trigger has a good range of motion.
I had the same problem. I figured it might be the new trigger being a little bit too long, applying pressure on the switch prematurely. So I took a blade and cut off around 2mm of the edge. That worked for me.
Hello! This is a very good question. In my opinion, the button fails due to a design issue with the button, the button having a weak area that fails when high pressure is applied repeatedly. In my opinion, using an accessory like the one you mention would help because the pressure applied to that button will be constant and, certainly, lower than those pressure spikes when the vacuum cleaner is used without such an accessory.
Great video but it should be noted that before I pulled out the trigger assembly at around the 5:50 mark, there was a screw that I had to take out first. At first I pulled and pulled and finally shined a flashlight inside to discover the screw! Maybe Dyson changed their design but definitely should be added to the video.
Hi, thanks for a great toturial. After i changed my button, the torque brush only turns when its on boost level. On eco and med it turns 1 sec. and then stops. Do you have any clue what can curse this ? 😢 Funny thing, my wife says that it blows more than normal from the filter and if i close my hands around the holes in the filter, the brush runs, also in med and eco and when i remove hands, it changes a little in sound and brush stops 😮 do you have an idea ? Br. Jesper
This is really weird. Can you send me a video to the email address TechFixPOVinfo@gmail.com? I would like to see in the video exactly how the defect manifests itself.
Thanks for this video, I have saved myself 125€. Dyson wanted I paid 125€ to repare this broken peace, for me it's a robery. I'll put a complain about it.
I accidentally ripped the white and black wires off the board. I thought I stuffed it up but I tried putting it back to the two holes and it seems to be working and charging fine. Would you know what the two wires are for if I will have any issues later down the track?
The two wires you refer to are connected to the connector that powers the brushes. If those wires are not installed correctly, the motorized brushes will not work. So, make sure they are connected correctly in the electronic board. You just have to simply push them into the dedicated holes.
Mine still wouldn’t work after replacing the trigger. The battery and the trigger works, yes but the vacuum doesn’t. Could I have ruined the circuit or some other part while replacing the trigger? When the filter isn’t placed and I pull the trigger, the filter light doesn’t turn on. Thank you.
What model of vacuum cleaner? Before changing the button, did it work properly (except for the button problem)? Maybe you didn't mount the small white connector with thin wires correctly.
Yes, it would be a good idea to try pressing the button with less pressure. Otherwise, the only option would be to replace the existing button with a model that has a stiffened area where the button frequently fails.
I've changed my dyson v10's trigger but when I put battery on it starts running and does not stop. I suspect that my triggers tail is longer than it should be. Do you have any suggestions?
I think you did not mount the module containing the hall sensor correctly. It is a small PCB that is mounted in the upper part near the selector button.
I followed the video and changed the new trigger, as soon as I inserted the battery without pushing the trigger, the vacuum turns on and won’t stop. Any clue?
Before watching the video I had my Dayson V10 not working, now after changing the red button that had it broken, it is working all the time and does not stop. What can I do?
Carefully follow the steps from minute 7:00. You have to make sure that the trigger is fully pushed and that it is fixed with the screw. It seems that the trigger is not fully pushed and the red button permanently activates the button on the battery.
You can use M3 screws, but they should not be longer than 7mm (thread length). Make sure you tighten them well to avoid imperfect contact and overheating of the connectors.
To everyone that put the vacuum back together and is horrified that it's not turning on - as I was - but instead only briefly shlwing three blue lines: it means you didn't plug the small white square connector back to the electronic board in properly. I suggest you go back, really push it in (it should click) and even add a nice layer of glue like it was when you opened it. Works like a charm after this!
I had this exact issue and was quoted £130 and a 4 week waiting time by a local vacuum repair shop. I bought the part for a few quid on eBay, and following this guide, was able to complete the replacement myself in about an hour! Thank you for this video!
For anyone else trying this I would highly recommend having good tools for it, such as the long screwdrivers with decent handles on them in the video, I had to muddle through with some cheap tools which made it much harder (but still doable!).
You`re welcome. I`m glad it helped. For sure you will need good tools, especially for the torx screws (T8). I also uploaded a new video (3 ways to fix the broken trigger issue). Is more detailed and gives you more options to solve this issue.
Thank you so much! I had the same issue with my V10, so I 3D printed a new trigger part and followed your video. The Dyson works great and more importantly the wife is happy!
Glad it helped!
Thank you so much. Lifesaver! Dyson would NEVER publish such a tutorial. The planned obsolescence is part of their business plan!
Glad it helped!
I just finished repairing my V11 and I'm so proud of myself! Thank you so much for this detailed video, it helped me every step of the way.
Yes, you should be proud of yourself, you managed to fix it and there is no need to replace it with a new one.
Thank you for your video, I was able to repair my v10 thanks to you !
It's great that you are talking us through the steps, most videos will only show us and put a little music.
Glad I could help
I have a battery here and was hoping to find someone in the U.S. to review it. I wonder if you are one of them?
Thank you so much for this video. I ordered a replacement kit incl two long screwdrivers on Aliexpress. There wasn't a manual. Because of this video I was able to complete the replacement on mine Dyson V11. This video is superrrrrrrrrrr 👌👌👌👌👍👍👍
Glad it helped!
Excellent video!! I just finished replacing my trigger after following this video. My trigger was broken in the exact same place as yours. Got the part and the toolkit from Amazon, and, after a week, I'm vacumming again. Thank you so much. Your video it's been very helpful.
Glad it helped
Repaired mine with glue but followed your steps. Nice soundtrack as well. Thanks a bunch. I owe u one bro
Glad it helped
January 2025. Thanks, just completed the replacement in 90 minutes following this. No problem, and my Dyson V10 didn’t have the silicon protection on the board. The plastic trigger was broken in such a way it prevented a direct pull-out, so I had to break and prise it out through the trigger hole. Replaced with a steel version, a little smear of Vaseline helped get the new trigger over the pins.
Found the trigger online, this video was by far the most helpful i found, thanks
Glad it helped
Thank you for the very detailed video. I was able to replace the push button and everything works great. You save me $600!
I'm glad I could be of help. Cheers!
thank you for making this video and helping us guide us through this process. could not have done it without your help.
wishing you all the luck and love and kindness in this universe
Glad it helped
That was a perfect video! Even the stops for showing the plastic pulled back as wide as a finger. I was able to repair my V10 within 1 hour.
Thank you! I`m glad it helped.
First off, I never comment on videos, so I hope that shows how appreciative I am 🤣. My dad never really fixed anything growing up (maybe cause they didn’t have TH-cam back then lol). Thanks to your video, my Dyson lives.
That is awesome! Glad it helped!
Dziękuje za pomoc . Bez tego filmiku nie wiedziałbym jak wyciągnąć włącznik . Pozdrawiam
Glad it helped!
Thanks! I was able to replace the broken trigger by myself! The hardest part is to find a T8 tool)
Glad it helped!
Great video, thanks a million, you’re 100% right they don’t make it easy to take them apart !
But you definitely do ! Dyson much like other manufacturers seem to put hi usage parts in their appliances, made of plastic, probably hoping when it breaks you’ll go buy a new one ! Thanks again 😄
Thanks for watching!
Thank you so much.. orderer the piece from amazon 9euro.. hard to dissemble and reassemble but very very well explained and showed.
Be gentle and sort every screw different from the other.
Thanks for saving me 200euro:)
Glad it helped!
One million thanks for your super detailed video: I replaced the plastic trigger with a metal one. Piece of cake with your help!!!!!! ❤❤❤❤❤
Glad it helped
Thanks! My switch wasn’t broken or cracked but apparently just flimsy enough to not always work. Bought a replacement switch that was much stronger plastic and now it works as soon as you start to pull the trigger rather than after squeezing it all the way down and still not working sometimes
Glad it helped!
Thank You soooo much!!! Muy Dyson v10 is working again and I saved a lot of money!!!
Glad I could help!
Thank you so much you saved me a new vacuum cleaner.
I'm glad I could be of help. Cheers!
Me too! Tricky but well worth the effort. Thank you 🙏
Thanks to your video I have fixed my Dyson
Glad I could help
Muchas gracias. En Dyson me dijeron que tenia que cambiar toda la pieza y me dieron un presupuesto de 119 euros. Me comunicaron que la pieza se había agotado y me animé a arreglarlo yo siguiendo el tutorial. ¡arreglado por 12 € con destornilladores incluidos en el precio.
Glad it helped!
Could you list the tools needed for this? I'll probably need to buy a couple of them. Thanks!
Fantastic! Just did it. You better are equipped with good tools to do it. Specially almost at the end of the dissembling you need a torx T9 (as before) but long and thin. Also a flexible adapter to reach some torx T9 as angle and space is minimum, this T9 is a must
That's right, without good quality tools, it could become very frustrating.
Great video, stopped watching another similar halfway and switched to this.
Much better!
Thank you! Glad it helped!
Thanks a lot!!! Very helpful, everything was just as You show 🙂
Glad it helped!
Saved me a price of a new Dyson! Thank you
Glad it helped!
Excelente trabajo mostrando todos los pasos para desmontar y volver a montar el gatillo de Dyson V10. Le felicito y le agradezco
¡Me alegro que haya sido útil!
thanks for the help. I was confused with the trigger when re assembling it as it wasn't springing out to the off poison until I saw you slide the battery back in place then it was all clear. the other thing I had trouble with was power leads connecting to the motor. After bending then up to get them out I found it difficult to get correct angle without putting a lot of pressure on the housing which I ended up doing.
I'm glad I could be of help. Yes, some operations can cause problems. The important thing is that you managed to get over it and the vacuum cleaner is functional again.
Thanks Pal..!🍻 I have just struggled removing the trigger switch, there is a screw that has to be removed before to pull off the switch.
Glad it helped!
Muchas gracias por tu video, ha sido de gran ayuda. Saludos desde España
Glad it helped!
Hello
thank you very much, this video will help me a lot, my V11 has had this problem for a few days, so I'm going to buy a reinforced model, and change it
Thank you very much, it's very well explained!
I'm glad it helped. Cheers! :)
I bought the new part (reinforced) because the original part is thin and I think it's just right and it will break in time, so finally, yesterday I did the assembly, disassembly, and replacement of the defective part with your video, and frankly nickel, I'm delighted, it was rather fast and it is working again
Thank you, it helped me a lot
You`re welcome! I`m glad it helped. Enjoy your working machine! I hope you got one spare button, just in case... Cheers, mate!
Great video, thanks for uploading. A fiddly job for sure, but worth the effort for the money saved. I found a PZ1 and a long reach Torx T8 screwdriver to be perfect for this.
Glad it helped!
The old trigger piece did not look bad but the pivot holes were worn and elongated a very little bit, but it fixed the problem. Can't believe it was designed to be so critical..
Thank you ! You saved me a lot of money
Glad I could help!
Thank you for the helpful video! Unfortunately, the display no longer turns on and the vacuum cleaner is pulsing. Could you please let me know what I might have done wrong?
google?
Make sure you have installed the small white connector correctly.
Excellent tutorial video. It helps tremendously. My V10 now works perfectly again :)
Glad it helped
… from Spain… thank yo so so much!!!
Imposible without your help 🤗
✌️
Happy to help!
Great Vid, followed it for my V11 which was slightly different. Only problem I face now is after putting it all back together and sticking the battery in, is it turns on and stays on, from what I've read elsewhere its because i didn't push the trigger mechanism high enough or the new trigger is slightly longer - not sure. But people typically file down the black trigger button on the battery and it fixes this issue. So will have to do that.
That has happened to me, in the end how do you fix it?
@@sys1237 filed down the trigger button. But I wouldn't really call this a fix tbh. Because every now and again it still sticks.
Excellent video, straight to the point. Thank you.
Glad it helped!
Thank you so much for guidance. Within an hour replaced trigger switch. 👍👍👍👍
Glad it helped
Огромное спасибо за это видео! Благодаря вашему видео я смог легко поменять курок пылесоса! Все было снято очень подробно и четко! Это мне очень помогло! Спасибо!
Glad it helped!
Thank you so much for this! Would you mind telling me what tool/brand you are using?
thank you, worked like a charm! Will be bookmarking this vidz for later on ;)
Glad it helped!
¡Gracias!
Muchas gracias, me has ahorrado 109 euros!!
Thanks for the reward! I'm glad the video was helpful!
you deserve a big like, thx
Glad it helped
Desde Granada, España, muchas gracias! Te debo una cerveza 😊
Me alegro de haber podido ser de ayuda! :)
I followed the instructions and it works again! However I can’t get it to stop. If the battery is in it keeps running. Where did I go wrong?
I think you didn't push the trigger hard enough inside the case and the button on the battery is pressed by the button you replaced.
Did you figure this out? I'm having the same problem. I have the white panel open, and I'm trying to avoid disassembling the next part which was tricky. When the battery is in, it feels like the trigger has a good range of motion.
I had the same problem. I figured it might be the new trigger being a little bit too long, applying pressure on the switch prematurely. So I took a blade and cut off around 2mm of the edge. That worked for me.
Thank you very ,much. Very good video, I bougth the trigger in Amazon. With 9€ I could solve the problem 😄
Glad I could help
Muchas gracias! Me ha servido para reparar mi V10
Glad it helped!
Hey ! Is it good to use thé little accessory that Block thé button when you use it ? Will it help not to break it ? Thank you
Hello! This is a very good question. In my opinion, the button fails due to a design issue with the button, the button having a weak area that fails when high pressure is applied repeatedly. In my opinion, using an accessory like the one you mention would help because the pressure applied to that button will be constant and, certainly, lower than those pressure spikes when the vacuum cleaner is used without such an accessory.
@@techfixPOV thank you for your answer, that makes sense !
Thank you so much. You saved us a lot of money❤
I'm glad I could be of help.
Great video but it should be noted that before I pulled out the trigger assembly at around the 5:50 mark, there was a screw that I had to take out first. At first I pulled and pulled and finally shined a flashlight inside to discover the screw! Maybe Dyson changed their design but definitely should be added to the video.
The screw you refer to is removed at 1:00 th-cam.com/video/fjWZKlPlqCE/w-d-xo.htmlsi=FrtoZU1sR_QImwRd&t=60
Thanks a lot for the video, I managed to fix it as well.
Glad it helped
Спасибо за лучший ролик,из тех кого просмотрел ваш самый лучший.
Thank you, glad it helped!
Hi, thanks for a great toturial.
After i changed my button, the torque brush only turns when its on boost level.
On eco and med it turns 1 sec. and then stops.
Do you have any clue what can curse this ? 😢
Funny thing, my wife says that it blows more than normal from the filter and if i close my hands around the holes in the filter, the brush runs, also in med and eco and when i remove hands, it changes a little in sound and brush stops 😮 do you have an idea ?
Br. Jesper
This is really weird. Can you send me a video to the email address TechFixPOVinfo@gmail.com? I would like to see in the video exactly how the defect manifests itself.
You are a life saver, thank you for sharing your great video
Glad to be of help!
拍得非常仔細。成功換了按鍵。
Glad it helped!
Thanks for this video, big help 😊
Glad it was helpful!
Nice work! Good to study something
Glad to hear that!
Excellent tutorial video. Thank you!
Glad it was helpful!
Thank you very much. You are the best. Perfect video 👍
Thank you too!
5:46 Just make sure that you removed the screw before pulling out the assembly! If not, you will end up breaking something like I did.
The screw you refer to is removed at 1:00 th-cam.com/video/fjWZKlPlqCE/w-d-xo.htmlsi=FrtoZU1sR_QImwRd&t=60
You are right! I might have missed it. My bad!@@techfixPOV
Wow.....Perfecto, tu video es genial, muchas gracias, saludos desde España!!!
Me alegro haber podido ser de ayuda.
@@techfixPOV gracias a tí he podido arreglar la Dyson de mi padre, y si la mía falla algún día pues también sabré arreglarla.... MUCHAS GRACIAS!!!!
3:20 are those screws still T8? Cause I can’t seem to be able to remove them with that, and i saw you changing screwdriver… can you help? :)
Thanks for this video, I have saved myself 125€. Dyson wanted I paid 125€ to repare this broken peace, for me it's a robery. I'll put a complain about it.
Glad it helped!
Merci beaucoup pour ce tuto ! Il m'a bien aidé à changer la gâchette de mon V10 ! 👍👍👍👍👍👍👍
Glad it helped!
I accidentally ripped the white and black wires off the board. I thought I stuffed it up but I tried putting it back to the two holes and it seems to be working and charging fine. Would you know what the two wires are for if I will have any issues later down the track?
The two wires you refer to are connected to the connector that powers the brushes. If those wires are not installed correctly, the motorized brushes will not work. So, make sure they are connected correctly in the electronic board. You just have to simply push them into the dedicated holes.
Thank you, it’s working fine since so I must have pushed them In correctly. Phew.
Fantástico!!! Muchas gracias desde España!!!
Me alegro haber podido ser de ayuda.
Mine still wouldn’t work after replacing the trigger. The battery and the trigger works, yes but the vacuum doesn’t. Could I have ruined the circuit or some other part while replacing the trigger? When the filter isn’t placed and I pull the trigger, the filter light doesn’t turn on. Thank you.
What model of vacuum cleaner? Before changing the button, did it work properly (except for the button problem)? Maybe you didn't mount the small white connector with thin wires correctly.
Muchas gracias, lo hice bien Gracias a tu vídeo ❤
I'm glad it was helpful.
Dzięki super materiał bardzo mi pomogłeś. Pozdrawiam z polski.
Cieszę się, że było pomocne!
Muchas gracias!!!me ayudado mucho el video!!
Glad it was helpful!
Спасибо брат🤗 благодаря тебе сэкономила время на сервисе👍👍👍👍👍
Отличное видео. Всё понятно. Спасибо!
Glad it helped!
Hello! Could you give me a tip on how to prevent the trigger from breaking, eg not pushing it all the way in?
😅
Yes, it would be a good idea to try pressing the button with less pressure. Otherwise, the only option would be to replace the existing button with a model that has a stiffened area where the button frequently fails.
Gracias, muchas gracias por el video🎉
Glad it helped!
genial ton tuto ❤❤
merci
Glad it helped!
I've changed my dyson v10's trigger but when I put battery on it starts running and does not stop. I suspect that my triggers tail is longer than it should be. Do you have any suggestions?
I think you didn't push the trigger hard enough inside the case and the button on the battery is pressed by the button you replaced.
Excellent video thank you very much
Glad it helped!
Thanks a lot for this video!
Glad it was helpful!
How do I get the trigger part out of the handle? Do I have to do anything more than then just pull it out?
Do not forget to remove the screw that blocks the trigger. I dismantled it in the first part of the video.
Thanks bro!!!!!!! DIY forever!!
thx for the videoo!! now the speed selector doesn't work. the dyson only runs at full speed. any solutions?thx
I think you did not mount the module containing the hall sensor correctly. It is a small PCB that is mounted in the upper part near the selector button.
Thx a lot man! Useful af
Glad to be of help!
Is there a good trick to get the switch back in its position I have pushed as hard as I can and it will not pop back into place no matter what I try
Thanks! 1 screw is hard to reach but all good
Glad it helped!
Bester Mann! Super Video-Vielen Dank!!!
Thanks!
Worked perfect ! 👍 thx
Glad it helped!
Thank you! But you make it look so easy haha
Happy to help!
I followed the video and changed the new trigger, as soon as I inserted the battery without pushing the trigger, the vacuum turns on and won’t stop. Any clue?
I think you didn't push the trigger hard enough inside the case and the button on the battery is pressed by the button you replaced.
Thank you!!!!🎉🎉
You're welcome!!
Before watching the video I had my Dayson V10 not working, now after changing the red button that had it broken, it is working all the time and does not stop. What can I do?
Carefully follow the steps from minute 7:00. You have to make sure that the trigger is fully pushed and that it is fixed with the screw. It seems that the trigger is not fully pushed and the red button permanently activates the button on the battery.
Thank you very much.
You are welcome!
Thank you so much!!!!!!! 👑👑👑
You are so welcome!
Great video! Congrats and thanks! ;-)
Thank you! I`m glad it helped!
anyone know where the screws for the two power cables can be found if someone "ahem" misplaced them?
The two silver screws at 10:45 in the video
You can use M3 screws, but they should not be longer than 7mm (thread length). Make sure you tighten them well to avoid imperfect contact and overheating of the connectors.
To everyone that put the vacuum back together and is horrified that it's not turning on - as I was - but instead only briefly shlwing three blue lines: it means you didn't plug the small white square connector back to the electronic board in properly. I suggest you go back, really push it in (it should click) and even add a nice layer of glue like it was when you opened it. Works like a charm after this!
Vorrei sapere perché invece non stacca più la batteria. Sarà difettoso il grilletto?