The Best LED Headlights For Your Toyota Pickup!
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- Time for a headlight upgrade? These LED headlights are amazing!!
LED Headlights: amzn.to/2GCd2TR
Relay Harness: amzn.to/3mU2iQ2
Part Numbers:
Outer Hub Gasket 43422-60010
Inner Hub Gasket 43531-60010
Inner Bushing 90381-30006
Outer Bushing 90381-30003
Inner Seal 90316-60004
Check out my merch!: avrcustoms.com/
Follow me on Instagram! / austinniemela
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
Send me stuff!
PO Box 133
Chattaroy WA 99003 - บันเทิง
I have those same headlights on my tacoma. Highly recommend putting clear silicon around the headlight housing to prevent them from fogging up from moisture. Mine fogged until I put the silicon around them to seal the headlights.
Thanks for the heads up about sealing up the headlights.
What are they called and where did you get them?
Yes where can I buy them? I’m still waiting for the harness
lookin good... I love living vicariously through you on your Toyota builds... makes me feel like I actually did something to mine lol
Killed it again Austin! Thats a damn good idea for the locking hubs!!! Stealing this idea for sure! Thanks man!!!
Damn! That's awesome. I used to repack my wheel bearings every other Monday. I had a lot of places to go four wheeling. I still have my hub scocket.
Great seeing your work/problem solving.
Thanks for the video.
That great improvisation too was dope as hell haha.
What about front hub - backlash drive shaft, when do you plan to do?
Only ones have found better for cold climates are the JW Speaker lights with heat. I love mine! Nice trucks. Cheers!
Thanks for the good info, just ordered the lights and harness for my truck
Awesome!! I hope you like them!
How would you rate these compared to your custom headlights? Trying to decide what route to go.
I have read you can buy glass lenses and plastic housings and you can retro them
Awesome video. Just one question what about the blinkers? Will the blinkers work with the harness?
I just got these for my pickup, but they are the newest 2021's with the Osram LED chips and they look the same but have the DRL / Turn Signal bar at the bottom. $90 on Amazon. I've got to order the harness now too tho. Derp! Thx Austin. PS -- The metal retainer ring screws are M4-.07 x 10mm (I bought new stainless ones to replace the old rusted ones) And just some objective criticism, you should make the wheel bearing stuff into it's own video or add it in to the video title. I would've never known otherwise.. :)
You will always have some leakage at the inner hubs, impossible to completely seal them. I have tried for years. Same lights I use with the goofy adapters:)
Yea id definitely take it to a shop. They have the big tools to be sure it gets pulled out straight and precisely
My thoughts exactly!
Nice , love Toyota Trucks
Hello!
I see They are out of Stock on the wiring harness on Amazon. Wich other wiring harness would you recommend?
Love your videos!
Bought the same lights and hope they work out
Awesome Bro love the truck
Just bought the lights can’t wait to install them
Awesome!! I hope you like them!! 👍
Austin "While we're in there" Niemela kills it with another great video.
Hahah might as well
Hey Austin, awesome job. Do you know which is best for the 2006 Tundra?
Very cool , very helpful thank you !
Austin, how about a pick n pull Taurus e-fan conversion? I’m just finished mine up and love having the fan off the motor.
Yeah I did that fan on my tdi truck!
Clutch fans are always reliable and cool very well tho, what was your reason for switching to an electric fan?
@@skylarpeak1597 iam guessing more horsepower although i agree with the reliability of the clutch fan ,i have had a lot of E-fan fails especially non factory
What wheels are those ?
I see you resolved the eng problem good for you
Hi i don’t know if your gonna read this but is there any chance you could tell me how tight to torque all of those other bolts and such that you took off , would be a very big help, thank and I love your videos!!!
Austin! I did a 3.4 swap about a year ago. learned a TON of stuff about these motors. If you have any questions let me know! Love what you do with thee Toyotas! they are my favorite!
Thanks man! The 3.4 is a great motor!
@@austinniemela Not sure if you fixed that Idle yet, but clean out the IAC really good or replace it. I had some idle issues for a while and the IAC's are pretty finicky on these
@@zdurden4214 I did clean the iac already!
@@austinniemela Good! should straighten itself out. Videos are awesome. love how you and your brother don't half-ass stuff
@@zdurden4214 thanks man!! 👍
Great video, very helpful. Quick question. I bought the new style headlight of the ones you have, including the wiring harness but when I plugged everything like I was supposed to, none of the other lights worked. No corner lights or tail lights. I removed the wiring harness and plugged in the old headlights and everything works now. Any ideas of why it could be?
Check your fuses!
I checked the fuses that are located in the engine bay and those are good. Any other place I can check for fuses? Thanks for replying and sorry for bothering you , it's just that I was excited to install the new head lights and the low beams work but no other lights as I mention work
do the turn signals work with the lights?
i installed those lights on my 82 4x. what a difference it made. throw those cheap mashie crimpers away an get a real crimper. in 50+ years of wheeling i can't count the number of times bad crimps have caused problems on the trail. put a brace on the far side floor an use a jack or porta power to nudge the door post over
Austin you may be able to drill through the cab towards the top, anchor a come-along through the hole to a 2x4 or something then to a tree and pull. Then patch the holes. Or if you are lucky, run a long piece across the inside with out drilling holes and pull on that. Looks like that might work in your situation.
"towards the top" ? the top is pushed in that far? It looks to me like its just the sheetmetal is dented up there. The b pillar does look like its pushed in and thats an easy pull with a block and tackle and a metal hook or a porta power from inside or it might pull out by just tack welding washers to the sheetmetal and pull from those. The A pillar could probably be pulled out with a big slide hammer and with a hook. These cabs are easy to move pillars on. But... it wouldn't hurt to get an estimate from frame repair shops. They may be hurtin for business and will give a good price
Just got this set up for a 94 22re headlight lights and harness. Hooked it up. All I have is high beams. Any direction to look? Thanks
I’m having the same problem. Ever end up figuring it out?
Are they DOT Approved? Not a fan of hard cut-off lines in modern lights. Makes me want to see more of what is ahead of me. I like standard H6054 with low mount driving lights tied into the low beams as law in VA.
It's good to see a man in today's time who has that good work epic need in all fields of work. Something that seems to be disappearing. Everyone wants to get paid but doesn't want to put the work in that is needed to get the job done. And done well. You are by far a breath of fresh air. Not like all those you see on the net that are looking for the cheap quick fix or the most expensive build there is out there. Just Something we everyday guys may run into redoing or going through a build ourselves. This is what made me stop and look into your channel. I have not seen you give up quality in doing what is needed to either one of these auto. Now that doesn't mean you have to grab the most expensive part there is, by no means, to get a job done and done right. Common sense goes a long way as well in getting the job done. Nothing wrong in getting into the junk yard to find that part needed. That's just good cost saving, or using ones common sense. Any way another great video my friend. Thanks for your time. Cannot believe this video is already a month old. Wow!! I guess it's true about getting old, time passes by you in a blink of an eye. The one you just miss. Ha, Ha, Ha. Again a well done video sir. Oh! A few of my friends have taken my advice and stopped by to watch your builds. Being old timers and mechanics as well, retirement can be a ( B ) at times. Like what they see as well. so well done my man. God Bless stay safe and healthy you and your.
Thank you!! I agree, not many people want to put in the work these day! Everyone expects things to be handed to them!! I appreciate the kind comment!! And thank you for watching and sharing my videos!! God bless!!
Thanks. Jist used your link to buy a set... truck is getting worked on. Needed some new lights that wasnt gonna cost me alot of money
Awesome thanks!!
Just made it first on Camron , Austin , Devin , and bobbi - its a Fam thing ...
What brand and where’d you get them??
Thx☮️
Quick question, so I plugged everything like you did on your video but when I do, none of the corner lights work. So I left the new ones plugged in and I plugged in one of the old headlights (driver side) and all of the corner lights work including the new ones. Any idea why that might be? Thanks in advance for the help
How do I change over to led on a Toyota t100 4x4 98 model with a 3 prong
Was just researching a retrofit for my '90 4Runner last week and almost pulled the trigger. Hopefully those links are affiliates so I can support ya!
Thank you! Yes they are affiliate links, i appreciate it!
I have an 89 Toyota pickup 4x4 ... will these lights work ? And I guess I'll have to use the harness as well ..???
Exocage would look good with the raptor liner theme
Hey there, had a question. I bought the exact same harness for my LED conversion and a pair of very similar LED headlights. Is your harness still running strong? or have you had to replace the H4 harness. Mine started acting up, randomly turning off and on here and there while driving. Ended up purchasing a more expensive harness with better components.
I haven’t had any issues with the harness!!
What tail lights do you use? OEM? Or aftermarket?
Austin, have you seen the vw 4.2 v8 tdi? It's a very good engine, durable with tons of after market support and if a v8 is not what you are after there's the smaller version wich is a v6 tdi, also an awesome engine with literally tons of torque! Just saying if you want to go for another swap in the future it might be worth chechking both those options out!
Clever idea with the pvc "greaser"! I'm new to your channel,if you don't mind my asking how big is your shop? Does the stove you have warm it pretty well or does it just take the chill out? I live in New England and will be retiring to northern Maine and am gathering ideas for my future shop build. Thanks!
36x36! Its a pellet stove. On really cold days it takes a bit to get up to temp but holds heat great. Its very well insulated
Just got these for my dads 1990 Toyota pickup!
Awesome!!!
Awesome lights Look great.
Just sucks in the Winter. LEDs don't melt any snow or Ice 😢
Does your high beam indicator light come on when you flip to highs? I have the same harness
Yes my bulb works!
@@austinniemela weird, my his and lows work fine, its just my high bean indicator wont light up
Will those headlights and harness work for a 93 4runner?
No 92-95 4runner have a different style light!
Are you using the vw ac compressor and ps pump on your tdi swapped toyota or how did that work out? I have an 89 single cab i want to throw some dollars at... just had the w56 trans rebuilt. My truck didn't come with ps either so I'm sure I need a new box? Trying to pick up a donor jetta asap
I don’t have ac! I am using vw power steering pump to the yota steering box
@@austinniemela lol hopefully I can figure out the ac, its hot down here. Sweet builds man thanks for the info
I was going to use those but then found different ones at a cheaper price and i can use my high beams
I wish they had these for my 96 t100 I would kill for these
@Robert Phillips there is none they don’t make these to fit my truck
Are the lenses plastic or glass..thks..jc
I just did this to my 91 truck and they work but the corner marking lights stopped working. any idea why?
where did you buy the harness and what is its name please friend
I have a 92 you can give me the name of the store or the page where I can buy them they look incredible
What are these called ??
Hey, what is the music at 10:34?
Hi, i'm a noobie in this things, what is he doing un the sec 3:08 3:15 ? Ty for the help :D
Please add link to buy these!?!!
nice
Could also price a cab from the wreckers
Damn i came across your channel & props to you dude! Definitely loving it! Im currently on the hunt to find 89-95 toyota!! These videos just giving me ideas on what to do haha
Thanks good luck on the search!
@@austinniemela thanks man!
Please add a fuse to the battery cable
Will the harness work for my 96 tacoma ?
Yes it should take the same harness
@@austinniemela thank you for responding boss. I’ll definitely order them right now for my taco
@@JoeGoldberg577_ good deal!!
Fascinating!! I’ll need to do this to mine as well. ........ now that I know how to......
I bought Trucklite brand 5x7's...... didn't use relay harness....lights work fine....the only thing is, my high beam indicator doesn't come on when on high beam....but no biggie
I bought a glass housing that looks stock that allows me to put my own h4 leds and I have the same issue with the indicator. I installed a harness too and it didn’t do any difference.
@@FISHFLYZZ I almost went that route, with the stock look....they were $199 a piece....
Austin, why can’t trucks now be that easy to put a headlight in? Even the projection up and down in your truck are easy. Trucks now are a pain in the ass.
Bro seal puller you need one they are like 10 bucks at the part store
Just sayin
Nothing like an old truck with locking hubs!
Nothing like simple and effective
I’m looking for better headlights for my truck. This video popped up on Google. It’s long so I skipped ahead to somewhere around 7 mins and was like uhhhhh….. anyways, I’m just looking for something better than stock. This video didn’t really show how they were so figured I’d ask. Any input is appreciated
Never mind. Just watched the first bit of the vid. Guess I just skipped all the headlight stuff lol
Amazon says these lights are currently unavailable. How sad .
Dang looks like they are sold out right now!
@@austinniemelaIi just checked again and now they show them. They must be watching your channel also.
@@lwoodt1 must be!!
i like this intro music better
Hey Austin i sent you a few questions on insta
Interested in buying the truck if you’re going to sell it after your done!
Yes this one will be for sale but we still have a ways to go on the build!!
My spindles are so dry. It sounds horrible. Sounds like a desk getting pushed across a tile floor.
If you ever decide to sell any of the truck please let me know 👍
Someday ill sell them!
Thank you for not installing LED ‘glare’ bulbs in stock housings-
100% first
👍👍👍