Custom Retrofit Headlights For The Diesel Swapped Toyota Truck
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Building a set of retrofit headlights for the Toyota Pickup! This is the 92-95 4runner front end swapped to the truck!! Lights turned out amazing!!
Merch: avrcustoms.com/
Follow me on instagram! / austinniemela
Parts used to build these lights:
Headlights: rover.ebay.com/...
Projectors: amzn.to/3fdc1g7
Wiring harness: amzn.to/3feo4d2
Halo's (100MM): www.theretrofi...
Shrouds: amzn.to/3ga3fkl
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
So far, out-of all the youtubers I watch, you have the most patience. Incredible amount of focus. And your work s so clean man. The whole truck, inside and out, is in my book the best, most beautiful, clean build I hav ever seen.
Arvind Paragsingh thank you man I really appreciate that!! 👍
@@austinniemela you're welcome brother
@@austinniemela hey man really like the build I have a 1995 4Runner 1kz swapped and I’m really interested in those headlights could you drop the link to those
Man that’s some great workmanship there. Looks really clean when do I drop my old 86 4Runner off for you next series 😊
dude the cutoff on these is insane... incredible work!
Amazingly comprehensive and great demonstration after installation. Thank you!
Nice, clean, missing my 03 4 runner and that 4.0, 267,000 miles, but it struggled to pull my 17’ enclosed trailer, Oil looked fresh at 5,000 mile oil changes. One tough vehicle, also had 4 tacomas, 2.7, 3.0. 2- 4.0s. Never a problem.Now a 2019, 6.2 F 250, time will tell.
This dude always has the coolest beats in his videos
Hey love the video I’m doing my own currently! Where did you find those rubber caps for the back of your headlights??
You did a good job! That look great
Wow!! The truck is amazing!! I thought upgrading my headlamps to LED was awesome, then you come through with this and just, wow!!!
Beautiful truck and very very nice work. Can’t find the headlights in the US.
Not everyone like style of headlights, but love your build, nice work mate. Hope to see more.
Headlights really look great! Whole front grill looks really good! Nice job !
Scott Blake thank you! 👍
Now to take the grille back off and black out the intercooler. The projectors aren't really my style, but man they sure are bright. Good job on the install, and the detailed install video.
This is soo clean! I own a 94 2gen 4runner as my daily driver and i believe this would fit. Could you build a pair for me and I buy it from you?
I wish the projector install on my Ford was that easy, I had to chop the hell out of the backs of the housings to get them to fit.
The side markers and halos with flash differently since they have different driver circuits built into them. I have the same issue and there isn't anything you can do about it, unless you could get both lights from the same brand, and even then there is no guarantee.
dont like matching paint but Awesome job keep it up
Since the toyota build cant go on forever next build i would love to see a decent horsepower alh build the truck makes good power but maby even more i know you could fab up some piping for a custom compound setup😏 then put it in a light car like a golf
Don’t even say things like that! it can go forever!!!
You should add a small amount of tint to the headlight housings. It'd make it look really nice and the lights are bright enough it won't really affect driving at all. Not like black but just a "smoked" headlight look
10:40 the first few hid retrofits I've done had some sag after a while, even after fixing the nut behind, what worked was fixing a small piece of plexi underneath the projector to fix the position vertically before tightening the rear nut. Hope these don't sag over time otherwise you will run out of adjustment with the adjuster bolts
Dope! We’re all still wishing it was a 4bt.
poormofo1 no way haha
1KD Toyota diesel! but still good
uh, nope... @ 700+ lbs and shake your teeth out, not to mention the noise... TDI all the way!
jimbote1968 yes sir!!! 👍👍
Very nice work. I am sure that took a lot of research. What about swapping out the incandescent dash bulbs?
Yes! I may do that!
Hello Austing, great video man, do you recommend install 12$ halo ring on retrofit process?
How did you get dual function side markers/blinkers?
Woah! It all came together great and it works perfectly. Your field of vision is way clear..
Very very sharp... the headlights and grill all together just really looks great. All around just a sharp looking truck. I really like the bed you built. I can see adding little things to it already lol. But it is just a great looking truck and you haven't even put the other tires and wheels back on it lol...that will just be another wow factor... I really enjoy the fact, and it shows that you are meticulous in your work. Those little extra steps are what sets a good job apart to become a great job.
Thank you!!!
Just the video I needed!!! I have a 94 4runner. And I was looking to do the retrofit but couldn’t find any videos!! Thanks man!! Truck looks and sounds beautiful!!🤙🏽🤙🏽
Thank you!
well, now I'm going to need to do that to my 95 4runner. They look amazing man, nice work
Thank you!!
Great job on those headlights ! You must have spent many hours researching the right parts to make everything fit together as well as they do, cudo's to you. They look awesome and produce more light than I expected !!! I also like the amber turn indicator portion of the headlight, that's cool.
Great craftsmanship as always, hope you do more projects after this truck is complete!
I really like the truck. I agree with you that the black engine bay is nice!
On the shrouds did you paint them or did you buy them black?
Great work! Crispy clean and fresh💪🏼 I rebuilt a 94 pick up about 12 years ago. Love what you’ve done 😎
See now thats class 👏. So much better then that goofy VW EMBLEM. that really makes it more custom
Sick mod! I’m planning on putting an ln106 dual cab onto an lc76 chassis with a bed similar to yours. Gonna be following your build!
Love it. Actually I loved it so much I'm going to copy that exact retro fit for my 2000 dodge ram van 1500. Hope you can share links for those parts (all except the housings cuz I dont own a toyota pickup).
Great builds man! I love both pickups so far.
Maybe I do also something like your flat bed for my 2001 nissan pickup too. And some plate bumpers also. I'll share updates as I progress on those builds.
I didn’t know they made the non flutted lens headlights. I’ll definitely look those up when I do the 4Runner conversion to my ‘94 ext. cab.
How do u mix your paints. The red looks good
Austin, you got any measurements for a 80 series land cruiser bumper?
i'm getting the parts today(placing the order) then I'll copy your job, thank you so much for sharing.
Awesome!!
@@austinniemela I almost done, it turned really good, I don't know how to share a picture, but thank you again for sharing your idea.
Francisco Gomez awesome! I’m glad it’s working out for you!! 👍👍👍
They are phenomenal and I don’t know about you but you could make some serious money just putting halos in peoples lights like that and I wish they where a solid red to cause it would look aggressive but that’s my opinion and your truck but all in all you put a lot of time and deserve to do whatever you want it’s perfect
Chase Settlemire thanks!!
Austin, you should graft a Taco hood scoop onto yours. 😉
Would a 92 4runner headlight fit on a 97 hilux?
Mis respetos a este trabajo tan bueno y limpio en todo el carro
必ず人手間加えるところが流石です‼️🙇
参考になります‼️🍻
またの動画楽しみにしております‼️🙇
So damn clean! Great work! 👍
In the past I've used oven cleaner to pull the chrome coating off plastic before painting or dyeing
Que bonita camioneta buen trabajo
Sic!!! Looks awesome!! Great job
I randomly just saw this truck on TikTok. Look Good!
Got a questions.. I have red,white and black wires. Do I hook up the red to my turn signal or to my emergency lights? White hook up to my head lights and the black is ground? Please help first time. Thank you. 96 toyota 4runner
There are those who can hole saw something while holding it by hand and those that are mortals.
How can I find modern headlights led/projector for 95 T100
Those lights are so sick! Do you know of anything like that for the mkIV jettas? I want to do projector but not spend a fortune to do it
Troy Criswell I would think these mini h1 would work great in the Jetta housing as well
Looks so dang good !!!!!! What i woulda reccomended was hooking the halo to your parking lights so they are on without the headlights
👍👍Very nice, great job! Greetings from Germany !!
Top truck!
Turned out great. 👍🏼
Thanks 👍
Now to get it nice and dirty😂😂looks awesome mate
Truck looks great! You do great work bro.
Hook the white halo to your fog lamps
Top shelf install
Where did you tap the 2 wire from the projector to, to activate when high beam is turn on?
How can I get headlights with the transparent liza headlight lens, since my truck has them shaped in the lens and the lens does not show the cut :(
Where did you get the wiring harness for the halos to make the turn signals and day time running lights work? Or does it come with the halos?
It comes with the halo from TRS!
These look great getting some for my Hilux surf
What a cool build. Awesome job!
I'd_rather_be_Fishing thank you!!
Quedo muy genial la Toyota felicitaciones 👍
What size are the caps for the back of the headlights? Thanks in advance
Truly enjoy your passion and workmanship!!!! Your videos are so helpful -Many thanks - !!!!!
I cant remember now sorry!
Very nice work
love watching your videos all the way from Samoa
@Austin Niemela congratulations on the wonderful job you have done to the pickup.
2? Where did you get the front bumper.
Can you do a set of front lights for me
paul clayton thank you! Bumper is from movebumpers.com
Are the wires okay to go in the oven as well?
Yes they do just fine!
You should make a Toyota Badge (spelled out) for that grill, BUT make the O's a VW emblems!!! Great Build! I just pulled the rear diff out of my Hilux
Build & Adventure that’s a good idea!
Have you thought about making some lights to sell?
What ring size did you buy for the halos?
They look awesome
Good vid!!... thanks!..
With this upgrade, do the lights dip to the correct side on low beam, as per the factory spec lights?
Yes they do!
I have a similar (later)model in Australia.its hard to get compliant aftermarket parts for RHD vehicles. Most china/ thailand parts are cheap and nasty, and suit LHD vehicles..
Congratulations my broo. Nice 😎😎👊👍💪 God bless you and you family take care. Greetings From Panamá
The only thing I don't like about the truck is that flat bed a regular bed would look so much better
Хорошо получилось👍
Good job man
Another great job Betty Crocker.
Curtis Oedekoven cooking up all sorts of stuff 👍
does the front grill and headlights fit perfect on the hilux? i want to do it on my 91 hilux too, but i would like to know if there is something that doesn't fit
Looks badass
en español se dice que perronas te quedaron
Nice work. Looks very good 👌👍
hey dude! the headlights are beautiful! where are you going to stop!
JEREMY I don’t stop haha
@@austinniemela 😎👍
4runner front end looks so much better
Tj Hupp thanks bro
Who the f$&k thumbs down to this video!
There are some people that don’t know skill and precision when it’s right in front of them!
Or they drive Nissan’s!!
Mussa Musumeci it’s them damn Karen’s man!! 😂
I’m building a bullbar like that for my 03 Hilux, I like it !!
Very sharp Tacoma
30 years old looking brand new
My lovely truck
Mate these look slick !!!!
shannon obrien thanks!
Bom tarde .
Sou só Brasil .
Tenho uma Hilux anos 2000 gostaria de colocar um kit desse.
Qual o valor dele e qual o procedimento para compra.
No aguardo
Show de bola o seu canal👏👏👏👏👏✌️✌️✌️
Great job buddy, Nice hat btw where can I get one .
Marvin Nájera fox racing!
Nice job Sir.
Vilen dank fur gut video!
That is the resistance load
Amazing truck.🤙
Thanks 👍
You should be doing 1st Gen Tacoma flips for cash.