Thank you!!!! Every single other video shows the crank and everything already removed and assumes everyone is only asking about how to knock sealed bearings out of the frame. Well I wanted to double check which side was reverse thread before I started reefing on it in the wrong direction, and if it was possible to remove everything without a 32mm spanner wrench and whatever that two-pronged wrench is called that fits in the slots in that plate. Seeing you do it told me everything I needed to know and I got it removed with an adjustable wrench and a big ol flat blade in a slot.
there are hard to remove but the dk bike I got is now stripped cuz the bolt is that tight and the factory seemed to paint over the screw on top of thread locking blue stuff. Idk what to do now
I'm sorry that i do not have a better video to show that process. The sprocket is installed on an unsealed 3-piece the same way as a one piece crank except it has a crank arm bolt like a sealed 3-piece. you can check out the beginning of my 1-piece installation video to see how I install a sprocket on a 1-piece crank. th-cam.com/video/Sgvx7p6IySk/w-d-xo.html
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
Thank you!!!! Every single other video shows the crank and everything already removed and assumes everyone is only asking about how to knock sealed bearings out of the frame. Well I wanted to double check which side was reverse thread before I started reefing on it in the wrong direction, and if it was possible to remove everything without a 32mm spanner wrench and whatever that two-pronged wrench is called that fits in the slots in that plate. Seeing you do it told me everything I needed to know and I got it removed with an adjustable wrench and a big ol flat blade in a slot.
Thanks for the great video and instructions 💪🏼
do you know where i can get those bracket bushings and how to determine what size i need?
there are hard to remove but the dk bike I got is now stripped cuz the bolt is that tight and the factory seemed to paint over the screw on top of thread locking blue stuff. Idk what to do now
For bearing greasing and other general maintenance I don't have to take the bearing cups off right?
no
I needed this for the kink 2022, removing the crankset made me cranky.
The 23 isn't any better
HOW DO I PUT THE SProcket on the spindle?
I'm sorry that i do not have a better video to show that process. The sprocket is installed on an unsealed 3-piece the same way as a one piece crank except it has a crank arm bolt like a sealed 3-piece. you can check out the beginning of my 1-piece installation video to see how I install a sprocket on a 1-piece crank. th-cam.com/video/Sgvx7p6IySk/w-d-xo.html
why don't any searches mention this lock bolt!? it should be in the literal title too!!
素晴らしい👍
Nice Video , well done .
Thank you
Thank you so much bro
You’re welcome. Glad I could help