Do we use the discount code until the final payment? Right now it's just the $99 deposit, but later on when we do the final payment we add the code right?
Good review. This is on par with the xTool P2. The P2 though does have a slightly bigger bed 305x600. But I have to admit, a couple of the features on the Atomstack are better than the P2, for instance the position of the emergency stop & the focus function. It's also a lot cheaper than the P2.
what a great review again, James. so clear and understandable.I like to see your video's and stuff that you make. Keep on making them. many people like them all over the world,👏
A little bit but ar this point it should be entering the lense close to the centre so it doesn't throw it out too much. However if your are constantly using it at that lower depth then I would take the time to realign the beam
It looks like a more sleeker version of the Xtool range (I own the S1 20w). It just seems to me that they're 2 years behind Xtool so it'll be dated in 6 months or so.
How easy is it to clean the lens at the final stage. This is where problems have occurred on other desktop lasers from smoke build up and a lot of third party designs have been created to simplify lens cleaning.
Just for you...I went and did it today. Really easy. Slide off the casing on the head. Unscrew the lens holder with your fingers and the lens is then free to be cleaned and taken out
Well given they deliberately pushed their new machine out early just to try and beat Atomstack launch and theirs is priced $1200 more...I'm guessing probably not 😕
I actually took a look at the inners and I truly don't believe it would have been that difficult to have made this 600mm wide working area. They probably had their reasons but I may tinker and try and get it working 😁
@@JamesDeanDesigns the thing is. the width is actually wider than the P2 39" but yet the working area is not as wide. I think the right side of the machine took up way too much space for the internal components.
@starblazer13 yeh I get that. The measurements for the AtomStack include the estop and keys on the side so the actual machine as such is smaller but they could have potentially done a little more with the size of the unit
@@JamesDeanDesigns Lots to like about it though. I like the fire extinguisher, the conveyor tray system, the steel construction, the LED lights. If only it was slightly wider....
@@JamesDeanDesigns Ah yes, just saw the website. I have no idea how I missed that :). Look forward to your next video on the machine, which will probably showcase the camera in use.
AtomStack Hurricane: www.atomstack.com/products/atomstack-hurricane?ref=JamesDeanDesigns
Discount code: jamesdeandesigns
When you click on the link - says page not found. Was keen to see the price.
Do we use the discount code until the final payment? Right now it's just the $99 deposit, but later on when we do the final payment we add the code right?
Good review. This is on par with the xTool P2. The P2 though does have a slightly bigger bed 305x600. But I have to admit, a couple of the features on the Atomstack are better than the P2, for instance the position of the emergency stop & the focus function. It's also a lot cheaper than the P2.
A great review, thank you. Love that at 3:53 you can see a dint in the front right of the lid just as you're about to say how sturdy the lid is 🙂
The lid is sturdy, me keep moving this around the workshop for filming however is not...I'm a bit of a klutz 😕
Hi James, another fantastic review, keep the great work
lovely looking machine, thanks for the review.
Very nice machine. Looks like a very well built machine indeed. Thanks for your review!
Thank you. Keep up the good work with your videos as well 👍
what a great review again, James.
so clear and understandable.I like to see your video's and stuff that you make. Keep on making them. many people like them all over the world,👏
Thanks, will do!
oh man i totally want this!
Great video, thank you!
Can this engrave inside curved bowls?
Great job on the review! When you show the laser head can be moved up/down by loosening the 3-screws, wouldn't that change the alignment of the laser?
A little bit but ar this point it should be entering the lense close to the centre so it doesn't throw it out too much. However if your are constantly using it at that lower depth then I would take the time to realign the beam
@ thank you for the information! 👍
Nice!
👍
Good review👍
Thank you 🙏
nice machine, how much is it? As I know most of the CO2 machines are very expensive?
I do cover the price in the video but the early bird price is US$2799 GB£2150
@@JamesDeanDesigns Thanks, will consider get one here.
I need one!! 😂
It looks like a more sleeker version of the Xtool range (I own the S1 20w).
It just seems to me that they're 2 years behind Xtool so it'll be dated in 6 months or so.
How easy is it to clean the lens at the final stage. This is where problems have occurred on other desktop lasers from smoke build up and a lot of third party designs have been created to simplify lens cleaning.
Just for you...I went and did it today. Really easy. Slide off the casing on the head. Unscrew the lens holder with your fingers and the lens is then free to be cleaned and taken out
Engraving pcbs, which is mainly made of FR4 material is highly toxic. Take precautions when doing so
Very good point.
Nice 👍👍
When is the giveaway? 😉😉😁😁
Probably in a week or two 👍
is there any stock in jp
This.
the only thing i like about it is Xtool may become cheaper
Well given they deliberately pushed their new machine out early just to try and beat Atomstack launch and theirs is priced $1200 more...I'm guessing probably not 😕
the width being less than 24" is a dealbreaker though...
I actually took a look at the inners and I truly don't believe it would have been that difficult to have made this 600mm wide working area. They probably had their reasons but I may tinker and try and get it working 😁
@@JamesDeanDesigns the thing is. the width is actually wider than the P2 39" but yet the working area is not as wide. I think the right side of the machine took up way too much space for the internal components.
@starblazer13 yeh I get that. The measurements for the AtomStack include the estop and keys on the side so the actual machine as such is smaller but they could have potentially done a little more with the size of the unit
@@JamesDeanDesigns Lots to like about it though. I like the fire extinguisher, the conveyor tray system, the steel construction, the LED lights. If only it was slightly wider....
Xtool P2 copy
Sort of but with some additional features, and cheaper
Such a shame they didn't add a camera to the machine.
There is a camera inbuilt for positioning material and your designs
@@JamesDeanDesigns Ah yes, just saw the website. I have no idea how I missed that :). Look forward to your next video on the machine, which will probably showcase the camera in use.
@shawnclifton4777 I think I reference it briefly but don't really go into detail. The video was already getting on for 25 minutes long 😆
Why would you put a dark tint on a CO2 laser lid for no reason? Makes me worry about what other stupidity went into making this machine.
To give it that overall slick black look but as mentioned, this was a prototype and the window has been modified on the final version