2018 Goldwing Exhaust Modification
ฝัง
- เผยแพร่เมื่อ 28 ม.ค. 2021
- For a bit of my time, effort and $180AUD ($135USD) I custom fitted a set of ebay mufflers inside the exhaust covers, or heat shields, to produce a deep rumble sound which appeals to me. Instead of paying huge dollars and not sure if I would like the sound, I thought I would experiment.
- ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 3](http://i.ytimg.com/vi/A1XXYbV048k/mqdefault.jpg)
That sounds AWESOME Shano. Well done
Thanks, you No.1 fan you!
Very talented work Shane 👏
Appreciate the feedback Jon. I am working on a 'tail tidy' from scratch next, for an older CBR1000F I just picked up. Looking at doing a quick video on that when I get time.
Well thought out engineering job!!-pity they cannot leave Honda sounding like this!!!
Hi Nick, The guys I ride with love it. They say it sounds like a big V8 when under full steam and cool hearing it going through the gears. It might be my imagination but I think I am getting marginally better fuel economy too. Weird, as I am tending to ride it harder just to hear it. Thanks for the comment, Shane
I like the sound it makes when you blip it.
Thanks, It does have that occasional pop when backing off, which is sort of fun.
Love the sound!
Thanks, It now sounds like the beast it is👍
thanks for you time and project
No problem Al, Happy to provide options, information and entertainment. Thanks for watching it. Shane
Nice Install!
Glad you think so. It was a bit of fun! All the best, Shane
Sounds 👍
Great video thanks good work
Thanks Greg, I like to play around, especially when it doesn't cost a lot, Shane
Great video very detail-oriented do you know what size baffles there they are inside the exhaust
The mufflers are built like the 'old school' hotdogs. They are straight through with baffles around the casing. There is a small obstruction that directs low flowing exhaust into the surrounding baffle but when under full noise the obstruction does not catch much, allowing it to flow straight through. Hope that answers your question. Thx Shane
Well now we all want them !
I get good feedback from people I ride with Scotty. I have also had a number of enquiries about building then for others, just not enough to set up 'jigs' etc. Thanks for the comment.
@@shaneinoz1019 keep up the good work mate. I enjoy your blogs 👍
If you do end up making them sounds like a good reason to take a the wing ride down there..
Hey I got one for you after watching your video I took my mufflers off. Took a cut off wheel cut the front and the back on the spot welds ripped out the baffling welded them back together can't believe the thing even runs with all the restriction. Sounds better. But still would like it to be louder. Took about two and a half hours do both sides
Hi John, Your solution and other adjustments, were always an option, if I considered modifying the OEM mufflers. I was chatting to a local Honda dealer (open and frank discussion) and I indicated what I was about to do. He told me of a customer who bought a 2018+ secondhand wing interstate and needed a RWC to transfer it to his name. Problem was that the previous owner had done a mod to the original pipes and mufflers which made it so loud you could hear it coming two streets away, over other traffic. Apparently the OEM muffler are worth about $7K a set to replace. Long story short, he returned the bike and got his money back as the whole thing was cost prohibitive. I believe my mod and similar, was the safe way to go but I don't criticize anyone for having a go in another direction. If you are happy, that's all that matters. I wish I could weld stainless, I should learn one day. My ebay mufflers are basically straight through with a very slight deviation in the flow for some gases to go though a baffle. All the best, Shane.
I was just about to write about doing exactly what you obviosly did lol. I haven't done it but thought he ran a sound test without mufflers and no change so what could be the harm. Rip out the guts and call it a day.
Could you post a sound clip of yours? I’m curious what it sounds like straight piped like that
I quess if you want to blow a hole though your piston, and or damage your engine. Blindly changing the back pressure in your exhaust system could do that.
Very good job, love the sound, can I ado the same in my 2016?
Did you remember exactly the brand, because I love the sound.
Thanks Victor, The main thing about the 2018+ Goldwing is that they have the 'heat shields", or covers over the mufflers which means the bike's appearance does not change, except for the exit being bigger instead of the twin small pipes. I believe the mufflers are exposed on your year bike. If you are happy with the modified appearance, then I see now reason why you could not fit these to yours. I suggest you add any joiner pipes to your bike at the point where yours separate from other pipes rather than cutting any original Honda piping, so you can always refit the OEM set up. The oxygen sensor was fitted well ahead of where my set up started, so no issue there either. The mufflers on ebay are readily available and all the same if they look the same as pictured in my video. Go for it, little to loose but time. All the best, Shane.
@@shaneinoz1019
Thank you very much, I will try to get more information and find if I can do it by myself o find someone else who can help me, thank you for your time and keep riding your motorcycle.
Hey Shane, do you have a recommendation for an eBay exhaust to buy similar to the one you modified? The link you posted expired :(
There are heaps of listings for similar items Jon, here is just one - www.ebay.com.au/itm/313913008365?hash=item4916ac60ed:g:BP4AAOSwruBhI1hq
greet video, can you please provide the link for Exhaust
There is no actual link to the 'exhaust', they are just simple mufflers I found on ebay and I fabricated the rest by hand. They are abundant on ebay, the same as can be found here -www.ebay.com.au/itm/393264156811?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3De4285491743641d69f9b75fc9411606d%26pid%3D101195%26rk%3D1%26rkt%3D12%26mehot%3Dco%26sd%3D303779097104%26itm%3D393264156811%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWeb%26brand%3DUnbranded&_trksid=p2047675.c101195.m1851
Honda-Ferrari! Love it. but I enjoy the silence so I am staying stock. (But there is "sport mode!)
Thanks James. Fully agree, the sound of ones motorcycle is a personal thing. All the best.
Would you consider making another set and selling me one?
You supply the same slip on mufflers (black or chrome) and then get a your local exhaust guy to make the joiner afterwards ...............certainly yes. Not sure how I would cost out my work but I would work it out. Where are you located? I think if more people wanted them I would need to make a 'jig' for the joiner pipes in due course and I would also make the main internal stay bracket look nicer. Shane
@@shaneinoz1019 I'm in AZ, USA and if you could just do the bracket for me, that'd be perfect. Maybe a no weld solution?
@@GaitesKlein As much that it would be a good idea, unfortunately I don't think that would work as it is a very custom fit even after the strip brackets were pre-made. I suggest if you could put it together from just the supply of the brackets, then you would be very capable of fabricating the brackets yourself. I am no genius but just have the time and patience. I wish you all the best. Shane
Great job! Bet it sounds great in person I find that videos never seem to do exhausts justice. Do you happen to recall what the diameter of pipe was at the cat where you connected?
It's been a while, but I believe about 2 1\4 inch pipe. The muffler pipe can be viewed from underneath, try using a caliper (digital or dial type) to confirm the diameter.
How much for a set?
Hi Moe, I have been asked about that before. I did this for myself and as a guide for anyone else who would give it a go. It took a fair chunk of my time plus the custom joiner pipes required to be made by a friend. Not sure what he would charge if made as a paying job. The build is solid and works well but I am not sure if you were paying for such a thing that you would be happy with the quality, and to be honest I would not be happy selling it without that understanding. Eg. when you squash the round pipe the chrome splinters off the pipe. Hope you see where I am going with this. All the best if you give it a go and happy to answer questions if you are unsure. Shane
How much please !
Please see the reply to this in the duplicate question, many Thanks.
How much please
Hi Kareem, I made this as a custom project for myself and have been asked a number of times about cost if I built for others. It is difficult due to the logistics of how I could do it for others so I think it best to have someone you know, close to you, use my video as a reference and build it for you. That is, unless you live in Melbourne Australia, then we could work something out. All the best, Shane
@@shaneinoz1019 am from egypt please sell me one