DIY Table Saw Fence

In this video, i showing how to make diy table saw fence. I upgrade my factory fence to t square fence. Actually, my table saw is contractor saw, but i want it like a cabinet saw.
want to see plan and the material, click link below.
www.instagram....
If you are interested what i do, give me the thumbs up. Leave me a comment for feedback or just how to do the right way. You can also support me by subscribe this channel, no pressure.
For more video, pict and my activity, follow me on Instagram @adhiepane
#adhiepane #tablesaw #tablesawfence

[@radek4177]

I have table saw outside and this fence would be great for it(no warping due to humidity). Thanks for sharing.

[@adhiepane8791]

Yes, your table want it
Make it happy again 😎

[@johnnybahngload1673]

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

[@danieldeutschle8038]

This is by far the best video I've seen yet on making table saw fence! Awesome job...

[@adhiepane8791]

Thank you Daniel, anyway a lot of better video out there

[@davidswanson5669]

It seems like most woodworkers don’t also know how to weld and fabricate with metal (hence woodworking) and so most of them make their DIY fence systems completely out of wood. This shows why it’s good to diversify your skill sets.

[@abuabdulmuhsin]

akhirnya nemu juga fence yg pake besi, lebih smooth emang perpindahannya kalau pake besi

[@indraalvieno1776]

ini yang di Tunggu2 Akhirnya Di upload jg,
izin Nyontek yaa Om 😁

[@adhiepane8791]

Hajaaarrrrr

[@lastorianostra8173]

My deep respect, Boss. You were born with 2 right hands!
Greetings from Roma, Italia.

[@adhiepane8791]

Actually 3, 2 right 1 left 😁
Thank you my bro, Indonesia waiting for you

[@foinkle]

This is absolutely fantastic! I'm so amazed by your skills!

[@adhiepane8791]

Thank you
I hope you know that the welder isn't me 😁

[@bobcade1002]

Very nicely done! You are a true craftsman!

[@adhiepane8791]

Thank you for kind of word

[@robertcollins8739]

Razor sharp big guy! Awesome work.

[@adhiepane8791]

Thank you for the kind of word

[@ILoveTheOarsman]

Welding in flip flops like a boss.

[@adhiepane8791]

Thanks for the reminder sir 🤐

[@celsoraymond1347]

man, what a magnificent job you've done, greetings from a new brazilian fan

[@cliffpage7677]

Outstanding machine shop work and creativity!

[@adhiepane8791]

Thank you so much

[@lincolntewhaiti6404]

This is what ive been looking for in a build. Is there any where to get measurements etc to replicate this ??

[@jhonarief]

Mantap om... Semangat terus om

[@adhiepane8791]

Siap om, btw tengkiu om

[@fabbrorandomlife]

Best and easy design. Just saw also on instagram. Do you have also plans for all the holes and the measures?

[@xysix2548]

This is awesome. The best DIY table saw fence I have seen. Thumbs up, subbed and liked.

[@FINEPROJECT]

KEREN bingit Itu Pak. Inspired Pokoknya ☝️👍👍👍😁🔥💪

[@adhiepane8791]

Pengen numbuhin kumis juga? 😄😄😄😄

[@gregmoyer8959]

Very nice craftsmanship great job

[@adhiepane8791]

Thank you for kind of words

[@filthymucktetanggablackred6733]

14:56 👍👍👍👍👍👍 di cek pake dial, mantabbbb

[@draztiqmeshaz6226]

Perfect! Thanks for sharing!

[@adhiepane8791]

Thank you

[@poerwojadoel7992]

bro persis super cool tools fence ,

[@ajbaker136]

Excellent build

[@nelsongg4465]

Parabéns ótimo esquadro fácil de ajuste .

[@mondodeiconigliedeiroditor2511]

Fantastic video 👍. Very good 👏.

[@adhiepane8791]

Thank you for kind of words 👊

[@WSO8945]

Very Very good job Man !

[@leelayton6296]

Clever idea

[@adhiepane8791]

Internet very friendly 😁

[@dhikoewoodworker638]

Bisa dipesan gak om fancenya?

[@legyngerii265]

Keren bang...itu besi hollow utk sliding dan besi siku'y ukuran brp bang ??

[@ЖеняГартлиб]

Молодец!!! Достойная работа! Сам станок самодельный или заводской? Есть обзор?

[@adhiepane8791]

English please?

[@pellecarlsson8408]

Thumbs up!

[@merlameneses2946]

Do you have any detailed plans for this?

[@jean-francoisste-marie6139]

Very nice work! What kind of material are the red panels?

[@adhiepane8791]

Thank you
MDF with HPL finish

[@IstanaDesignKendari]

Mantap Adhi Pane...

[@adhiepane8791]

Tengkiu brader

[@jrvarghese4773]

Excellent work! Do you have any trades training or all learned through work experience?

[@adhiepane8791]

I learn by doing and the best part is i can find what i need here, in this platform.

[@muhammadafandy9450]

Di tonton 10 ribu x, yg subscribe blm 600. Yg nonton serius ngikuti video smpe lupa subscribe. Workshop dimana bg?

[@adhiepane8791]

Penonton paham bang, mana yg harus dan mana yg tidak, lagian kadang mereka gengsi hahahha
Duri, Riau bang

[@rubin2700]

@@adhiepane8791 mungkin yang nonton kepengen bikin juga tapi malah bingung krn gak ada penjelasannya apalagi yg msh awam kyk saya haha

[@adhiepane8791]

Iyes bang, itu bukan tutorial, itu video gaya2an saja 😁

[@syarifpedalaman8669]

Cordless drilnya tjakep bang 👍

[@adhiepane8791]

Waahh, kirain kerjaannya 😛

[@syarifpedalaman8669]

Kerjaannya keren abis dah 👍👍

[@adhiepane8791]

Hahaa, btw tengkiu bang

[@mikemerc74]

How long did it take to build this

[@adhiepane8791]

About 2 weeks, and spend about 2-3 hour for each day

[@legyngerii265]

Besi siku bawah ukuran brp x brp booss ?? N tebal brp mm ??..mksh

[@mrJanniekoen]

Thanks for the build video. I have been dreading building one as there are so many overly complicated build videos out there. It seems like you don't need a workshop full of machines to build this. I will be attempting to build one myself. That is with my limited skillset and all.

[@adhiepane8791]

Thanks for the true word brotha. All we need just do it and make it happen 🔥🔥

[@gumgum_gum7885]

Keren om... Izin bikin kw'nya om... 😬

[@adhiepane8791]

Sikaatttt

[@Imam-mx1nv]

Mantap

[@adhiepane8791]

Thank you

[@Imam-mx1nv]

Ukuran brp siku dan hollow nya om,jg pjg brp itu

[@azkainterior4201]

Mantap bang bisa pesen 1

[@adhiepane8791]

Masih buat untuk kebutuhan sendiri bang

[@dadangikmal8960]

Yg merah pada fence itu bahannya apa bg?

[@adunart6352]

Bisa pesen ga?

[@jessielacson]

Eye protection buddy please

[@sirjim3472]

biesemeyer style kata orang sono bang. hehehehehe besi hollow ketebalan berapa mm bang?

[@adhiepane8791]

Orang sini bisa juga bang 😁
3mm bang

[@fidelruslami568]

Bang adhie, besi hollow nya dapat drmn? Di pasaran ga nemu2😁

[@adhiepane8791]

Aku dpatnya di toko material besi daerah sini bang, mereka memang harus pesan dulu, klau gk slah dari medan

[@abdulkhalid4634]

Mantap Bang saya subcribe ya

[@adhiepane8791]

Siap, tengkiu bang

[@imammuhammadjainuri2276]

Bang itu yg terakhir diapain ya?

[@adhiepane8791]

Memperlihatkan kalau fencenya lurus 😁

[@rezkymulya1580]

14:22 dorong terus om, 🤣🤣

[@adhiepane8791]

Handbrake aktif om 😄😄

[@Juan-nm4gp]

me encanto, podrias pasar el archivo del sketchup?? quisiera modificar. el angulo es de 75x75x6mm pero veo el angulo de un lado menor que el otro puede ser que hayas cortado?? gracias saludos desde ARGENTINA

[@adhiepane8791]

English, please 🙂

[@Juan-nm4gp]

@@adhiepane8791
I loved it, could you pass the sketchup file ?? I would like to modify. the angle is 75x75x6mm but I see the angle of one side less than the other, could it be that you have cut? thanks greetings from ARGENTINA

[@Juan-nm4gp]

@@adhiepane8791
USE THE GOOGLE TRANSLATOR MY ENGLISH IS BAD

[@Juan-nm4gp]

@@adhiepane8791 IN THE 1:30 MINUTE I SEE THAT ONE SIDE OF THE ANGLE IS GREATER

[@adhiepane8791]

Man, you are a nice viewer 😁
Actually, i made my fence about a year ago and i never record it. In this video, i made it again for my friend table saw with same design and material. Yes, the angle iron was cut just because i used scrap material. Dont worry about it, you can put the short one to front of table saw for mounting as i did.
You can find sketch up plan on my Instagram, link in description
Actually, this is two projects in one video
The best part here, i must dismantle and assembly my fence again just for video 😁
My english bad too
Indonesian

[@bronzeladdy53]

using power tools, especially the drill press, with long hair out is a recipe for a hospital visit and permanent disfigurement.

[@SeamlessFab]

Enjoy your bubble-wrapped existence

[@DIYDK]

You made of iron feeling very heavy.

[@adhiepane8791]

I'm not strong enough 😁

[@JSKmonkeywood]

Om bahanya dan ukuranya apa aja om..mau nyontek nih.ijin yah

[@adhiepane8791]

Sudah check deskripsi om?

[@hariyanayusuf494]

Bang table sawnya pake apa, merek dan tipenya?

[@adhiepane8791]

Aldo 105 bang

[@fidelruslami568]

Bang, boleh pesan fence nya, ga? Kebetulan table saw sy jg aldo.. fence bawaanya menybalkan :D

[@adhiepane8791]

Waahh, belum kepikiran buat pesanan bang, belum berani 😬

[@fidelruslami568]

@@adhiepane8791 ga apa2, juga.. bagus kok buatannya :)
Oh ya, table saw abang, aldo 105, blade nya bisa turun sampai di bawah permukaan meja, ga? yang saya punya bladenya kalau diturunin ga bisa sampai di bawah permukaan meja.. tetap ada yg nongol sktr 5 mm.

[@adhiepane8791]

@@fidelruslami568 punya saya normal2 saja bang. Mata pisau bisa turun sampai dibawah meja

[@doniaguskh]

Table sawnya diy ya gan?

[@adhiepane8791]

Pabrikan gan

[@doniaguskh]

@@adhiepane8791 merk apa gan?

[@adhiepane8791]

Aldo gan

[@doniaguskh]

@@adhiepane8791 aldo 105 ya.. mantap

[@adhiepane8791]

Yep, betul

[@ardighea3888]

Orang mana bro ?

[@adhiepane8791]

Indonesia brader

[@mr.makeit4037]

Use a full mask when welding. You will get an intense painful sunburn on your face and neck that really hurts.

[@adhiepane8791]

Thank for remind me Mr

[@couldhaveseenit]

Those safety glasses aren't doing anything sitting on your head...

[@adhiepane8791]

Thank you for remind me

[@ilmupraktek2134]

ijin sedot hu

[@adhiepane8791]

Sedot sampai kering 😁

[@robertbmcneill3758]

thumbs down for lack of PPE

[@robertbeard9473]

Drilling steel without eye protection not smart.

[@adhiepane8791]

Thank you for remind me 🤝

[@RC-wi6xm]

long dangling hair and no safety glasses--- recipe for injury

[@adhiepane8791]

I always try focus in safety but sometime i need someone for remind me, thank you so much

[@jrvarghese4773]

adhie pane brother, please wear a respirator especially when welding. We want/need you around into a ripe old age!

[@adhiepane8791]

Thank you brother, as i mentioned before, i need some one for remind me and you are what i need

[@thomastieffenbacherdocsava1549]

Well done. Please wear your safety glasses at all times. Eyes don't heal like other body parts.

[@servidorcastlehill7660]

I´ll be doing this for my old Rockwell

[@mardakworkshop4450]

well done man 👌👌👌👌👌👌👌👌👌👌👌👌👍🏻👍🏻👍🏻👍🏻

[@adhiepane8791]

Thank you fellow maker

[@kensmith6908]

Please, in your videos, stop trying to be artistic and show what you're doing. We don't want a metal worker to be a director and we do not watch for the effects, we watch to learn what you are doing.

[@adhiepane8791]

Thank you for your feedback

[@awesomearizona-dino]

Now Thats A Serious Fence.

[@adhiepane8791]

You should make it one

[@superspecialty5169]

Wow, you never had anything fly up in your face? You are lucky… in my 50yrs in the trades, I’ve had at least 50 ricochets off my face shield/safety glasses. Also, hope you grind down the mushrooming end of the center punch!

[@JunkWorkshop]

Nice build 🤙🏻

[@adhiepane8791]

Thank you brotha 🙌

[@chanelembahso9717]

Excellent

[@adhiepane8791]

Thank you

[@igswen5970]

Без защиты близоруких глаз, волосы в патрон... При всем уважении к результату, так нельзя.

[@juanluisguerrerocuadros371]

Good job muy friend!

[@adhiepane8791]

Thank you brother

[@daniele-nocentini]

nice job guy!

[@adhiepane8791]

Thank you man

[@DIYtool_84]

Ada yg kurang Bang, itu selinder penguncinya pake bekas piston ya, kenapa ga dibuat dari besi behel diameter 3cm, terus dilobangin pake bor,.
Jadi kelihatan lebih real,
Begitu juga dengan bantalan fence yg warna merah, itu pake bahan nylon ?

[@adhiepane8791]

Aku pakai tie rod, bukan piston bang
Yg merah, MDF laminasi HPL
Check IG @adhiepane bang, di situ ada plannya juga

[@MIHEAWATR]

Very clever

[@adhiepane8791]

Thank you

[@MIHEAWATR]

@@adhiepane8791 you welcome :)

[@donnyjack1093]

Ujung fence itu gak goyang lae..
Hajarrrr..rrr..

[@mechatronik]

Table saw fence with incremental positioning

[@watcherwatchmen7785]

You have a cabinet saw now. Good job!

[@paulgaffney9866]

top notch job, very interesting 🤔

[@aaronjoseph7573]

Solid build. :)

[@adhiepane8791]

Thank you, you should build one

[@budisolo3289]

Keren workshopnya bro,,,impian

[@creightonwest6632]

That is good work, brother. Really good work.

[@danddwelding5148]

Beautiful job. You have inspired me to try and build one for my saw. Take care

[@federicocorso6212]

Great job!

[@adhiepane8791]

Thank you

[@victorbilodeau7791]

Wonderful job, I think I will use your design to build mine, thank you.

[@cherkruger1166]

Thank you for sharing, your work is amazing

[@MCArt-ml3bv]

wahh,,, ini lebih masuk ke kerja besi ,,,

[@adhiepane8791]

Ini kerja suka suka tepatnya 😄

[@kevinoneill41]

Thanks for sharing👍

[@HobiTukang]

Mantap bro...boleh dicoba nanti niru nya...hehehe

[@adhiepane8791]

Secepatnya 😁

[@جمالدحدوح-س4ن]

عمل رائع

[@mikerichards6311]

👍

[@dimagirsang4183]

Subscribed lae. Hajar teros jangan kendorin.

[@adhiepane8791]

Siaap lae

[@sandhiutomo5428]

Besi hollow ny ukuran dan tebal berapa om?

[@adhiepane8791]

Check deskripsi om, ada link materialnya

[@korekapik]

dulur HK , sakskribe meluncur kang mas.😁

[@adhiepane8791]

Waahh, silakan brader, sakskribe tersedia untuk di utak atik hahhaa

[@haroldsarino]

Nice cheers from Philippines!

[@adhiepane8791]

Cheers from Indonesia.

[@bertflisberg8908]

Stay away from welding.....please

[@adhiepane8791]

Smart viewer 😁

[@devan2282]

Mantapp bang...itu table saw nya merk apa bang?

[@adhiepane8791]

Thank you bang, Aldo 105 bang

[@devan2282]

@@adhiepane8791 mantap...keliatan keker banget yah...ky sekelas harvey dan sejenis nya...btw itu kisaran harga brp waktu beli nya bang(kl boleh tau)

[@adhiepane8791]

Aslinya kontraktor itu bang 😁

[@mogisanjaya2645]

Salah satu fence impian saya.
Semoga makin sukses Om 🙏🙏🙏

[@adhiepane8791]

Tunggu apa lagi, sikaatttt 😄😄

[@mogisanjaya2645]

@@adhiepane8791 blom brani bikin Om. 😂
Msih pikir2 untuk cadangan smntara TS ga bisa terpakai klo buat itu.

[@adhiepane8791]

Jgn kelamaan mikir, gk bakalan jadi ntar 😋

[@mogisanjaya2645]

@@adhiepane8791 hahaha.. Iya om👍

[@tecyduktecyduk9090]

Tu baja ringan bg

[@adhiepane8791]

Baja berat bang 😆

[@tecyduktecyduk9090]

Baja ringan bisa bg

[@arunkarusteelwood1293]

I like this..

[@adhiepane8791]

Sikaattttt hahaha

[@arunkarusteelwood1293]

@@adhiepane8791 aku nanti bikin mas ah..tinggal liat ini video..😆

[@adhiepane8791]

Jgn sampai gk jadi 😁

[@arunkarusteelwood1293]

Haha siap mas adhie..😉