If power goes off or switched off, the suction creates huge pressure causing leaks near the holes on the filter and the cap or lid. Not sure how to avoid it
Bro add another course sponge under the white sponge it won't allow the white sponge to clog by trapping bit particals .and it will give u the best filteration and crystal clear water
In the water intake pipe there is a small black sponge which is also traping particles so I think it's a great combo in a canister I have ever seen And his aquarium has already crystal clear water and also like your comment and tip 👍👍
I made same filter it is working good but there is one problem bro whenever electricity is getting off or whenever i am keeping it off that time whole water is coming out from the bottom outlet air tight container is also getting leaked any suggestions for this
Can't stop gravity! Most DIY external filters will syphon water from the tank if power cuts out. That's partly why commercial cannister filters are so expensive. Because they are made of hard plastic with proper O-ring seals and strong clips to hold the lid tight. Better to make DIY filter from a plastic planter box that sits above the aquarium. Any leak, and the water just spills back into the tank.
I received alot of comments facing the same problem of water leaking So I'm making a unique external canisters with no leakage issue and very easy to make Uploading video on this channel Very soon......
I'm using a 18 watt motor , which has 2.5 feet water pump capacity First measure the height between the aquarium top and the position of your canister filter below ( where you will keep the canister filter) Then buy the motor which have sufficient capacity to pump the water Up (On the motor the water pump capacity is mentioned) The height between my canister filter and water outlet pipe is 2 feet So I bought the motor of 2.5 feet water pump capacity
Hi tried making this canister filter but water from the tank is not coming into the canister filter. Can you please suggest to me what to do? I didn't add a valve? What's the use of the valve? does it help to create pressure and help the canister to suck the water from the tank?
Valve toh pani rokne ke liye h bhai jab pani saaf karte h Bhai tumhare filter m pani isliye nhi aa raha iska boht hi simple sa reason h 1st container air tight nhi h 2nd apne is video m dekha honfa pehle unhone pura filter m pani fill kiya jis se siphon ban jata h Aap intake pipe m siphon banao aur sidha filter m connent kardo kam hojayenga
@@Fun_hub420 right isko neeche hona chahiye lekin aise bhi kaam krega kyuu ki canister seal packed hai to usme paani uppar tak bharjayega Or pump tak phoch jayega to pump usko uppar phocha dega lekin mai banaunga too neeche hi rakhunga just iska opposite.....!!
@@yahya_176 ya sure then your going to kill your your fish When we put the pump below the WATER CAN REACH TO THE BOTTOM BUT THE NOT there are some where the air can trap and these gas with time convert into a deadly gas When the gas contact the aquarium then there is very high possibility of dying fish
@@Fun_hub420The water can reach to bottom but the traped air is alway go upside the water and they can't escape the which is very deadly that's you see many different good canister filter have pump on the top Please read about toxic gases in aquarium
You need to do it backasswards. The pump on the bottom and the in let on the top, that way gravity works with you, as the pressure needs to pust the material through the filter then the pump pushes the ‘clean’ water up. What your are doing is okay but the pump works harder.
It's setup like this with most bucket filters. This is to ensure no dirt that collects at the bottom of the filter (due to gravity) gets sucked out into the tank.
Some people think they know everything. Many (all) commercial cannister filters have the pump in the filter head, that is the lid! The original EHEIM cannisters have the inlet at the bottom!! I have never seen a cannister filter that had the pump in the bottom. The cannister is exactly that, an empty can, in which filter media is stacked, usually in baskets that come with the things. Putting the pump on the bottom would be "backasswards"!
@@ianrawlings2546 I bought a canister for my 75 gal & the pump is at the bottom, all the junk runs over top the filter media & the pump pumps the clean water out.
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
Liked because you keep your fish soo happy and give them a lot of space to swim
Amazing work bro...I believe this is the best video I have seen so far of making a DIY canister filter at home. Great work! 👍
Totally agreed 👍💯
Sir yadi light chali jau to water overflow to nahi hoga
Love it i wish i can make like this to my aquarium but its so much work to do😆
very good DIY..I am planning to something like it. will post when its complete.
If you mention Hose size and pump power would be great video
If power goes off or switched off, the suction creates huge pressure causing leaks near the holes on the filter and the cap or lid. Not sure how to avoid it
Bro add another course sponge under the white sponge it won't allow the white sponge to clog by trapping bit particals .and it will give u the best filteration and crystal clear water
In the water intake pipe there is a small black sponge which is also traping particles so I think it's a great combo in a canister I have ever seen
And his aquarium has already crystal clear water and also like your comment and tip 👍👍
@@aquaristdude2912 thanks bro
Amazing work brother ❤️
Love your work
You are champion of fish keeping hoby 🤗
Para cuantos litros es ese canister hermano 😊👌
This is something epic you made
Very nice 👍 👌
How intake take place without a pump? Do you use two pumps?
Wow 😳
I made same filter it is working good but there is one problem bro whenever electricity is getting off or whenever i am keeping it off that time whole water is coming out from the bottom outlet air tight container is also getting leaked any suggestions for this
Can't stop gravity! Most DIY external filters will syphon water from the tank if power cuts out. That's partly why commercial cannister filters are so expensive. Because they are made of hard plastic with proper O-ring seals and strong clips to hold the lid tight. Better to make DIY filter from a plastic planter box that sits above the aquarium. Any leak, and the water just spills back into the tank.
Bro make a tutorial how to off filter (I am not joking) love from India ❤
Switch off the pump
Hey, I just wanted to ask is there any compulsion to use air tight container?
Yes
Hey how manu mm pvc pipe and valve you used ?
Love from kerala 😍
Hi I made same canninster filter but wn I turn off the pump it's goes water overflow from filter any solution?
I received alot of comments facing the same problem of water leaking
So I'm making a unique external canisters with no leakage issue and very easy to make
Uploading video on this channel
Very soon......
If I use big size of bucket so in that case how many powerful motor use to water pump
Please reply
I'm using a 18 watt motor , which has
2.5 feet water pump capacity
First measure the height between the aquarium top and the position of your canister filter below ( where you will keep the canister filter)
Then buy the motor which have sufficient capacity to pump the water Up
(On the motor the water pump capacity is mentioned)
The height between my canister filter and water outlet pipe is 2 feet
So I bought the motor of 2.5 feet water pump capacity
Really very nice
👍👍👍♥️
Nice very good
Really good work brother. Minimum silicone used
Very nice 😎🤓🥰
I have 2'5 feet aquarium. So what watt motor I need ?
Bhaiya ye moter kitne wate ka hai
Bhai moter ne pani khech ker debe me dal diya magar debe se pani moter bina uper kaise cheda please batana
Please tell me what are those white and black tubes called
Would be great if you provide a link to buy the resources required
Lily pipes
Bhai ek baari details bta dogai ki kya kya samaan lana plz
The left side dirt prblm might be because of your inlet and outlet is in the same side so it might wont make the water flow high
Hi tried making this canister filter but water from the tank is not coming into the canister filter. Can you please suggest to me what to do? I didn't add a valve? What's the use of the valve? does it help to create pressure and help the canister to suck the water from the tank?
Valve toh pani rokne ke liye h bhai jab pani saaf karte h
Bhai tumhare filter m pani isliye nhi aa raha iska boht hi simple sa reason h
1st container air tight nhi h
2nd apne is video m dekha honfa pehle unhone pura filter m pani fill kiya jis se siphon ban jata h
Aap intake pipe m siphon banao aur sidha filter m connent kardo kam hojayenga
@@aquaworld1284 its done
@@jiteshsiddhuvlog how it's working brother
Bro ye to cooler wala pump ha isme pani upper ko supply krta h or agr ye upper rhega filter me to pani khase milega isse
Plzz answer I will try make this
@@Fun_hub420 right isko neeche hona chahiye lekin aise bhi kaam krega kyuu ki canister seal packed hai to usme paani uppar tak bharjayega Or pump tak phoch jayega to pump usko uppar phocha dega lekin mai banaunga too neeche hi rakhunga just iska opposite.....!!
@@yahya_176 ok bro ma bhi asa he krne wala hu niche he better hoga
@@yahya_176 ya sure then your going to kill your your fish
When we put the pump below the
WATER CAN REACH TO THE BOTTOM BUT THE NOT
there are some where the air can trap and these gas with time convert into a deadly gas
When the gas contact the aquarium then there is very high possibility of dying fish
@@Fun_hub420The water can reach to bottom but the traped air is alway go upside the water and they can't escape the which is very deadly that's you see many different good canister filter have pump on the top
Please read about toxic gases in aquarium
👍
bro where did you buy your pump? thank you
You can buy it from any electrical store tell them u need room cooler motor
You need to do it backasswards. The pump on the bottom and the in let on the top, that way gravity works with you, as the pressure needs to pust the material through the filter then the pump pushes the ‘clean’ water up. What your are doing is okay but the pump works harder.
It's setup like this with most bucket filters. This is to ensure no dirt that collects at the bottom of the filter (due to gravity) gets sucked out into the tank.
Some people think they know everything. Many (all) commercial cannister filters have the pump in the filter head, that is the lid! The original EHEIM cannisters have the inlet at the bottom!! I have never seen a cannister filter that had the pump in the bottom. The cannister is exactly that, an empty can, in which filter media is stacked, usually in baskets that come with the things. Putting the pump on the bottom would be "backasswards"!
@@ianrawlings2546 I bought a canister for my 75 gal &
the pump is at the bottom, all the junk runs over top
the filter media & the pump pumps the clean water out.
Does it newd air pump
Where u got the motor for this system
Bro plz describe the accessories!!
Whats the size of the transperant pipe ??
How water come from aquarium?
Please what is the name of the thing with wire
Bro where to buy that motor??
Para un acuario de 100 litros esta bien ese filtro canister
Bhai a instruments sara kanha milega
Pipe kitne mm ka hai
In that tank already have a hangon filter 😂
Tank dimension please...
30×12×18 inches (L×W×H)
Thank you...🥰
Bro give update of after 1 week
i believe that people have a fish tank to relax while watching it, but your tank looks like you grabbed it from the garbage
Can i get the ready made same filter, pl let me the contact email id.