2 door Tahoe - inspection ( part 1 )
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2023
- THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support ! - ยานยนต์และพาหนะ
Drum brakes are complicated enough without the concern that the last guy reassembled things backwards. Those ball joints were amazing.
Those are facts! Unfortunately I still can't get the brakes to work on this truck. I feel like I've tried everything
Another fine video, you do excellent work on vehicles. Hard to find someone who has your standards working on cars. Keep the vids coming.
Thanks! Plenty more videos coming on this truck !
@@themechanic6117 great I enjoy your work
Thank you for watching 👍
@@themechanic6117 I will always continue to watch, you give funny and great content.👍
I’m not offended brother I’ve watched enough of your videos to know you call everything a turd 😂
Ayyyaaa it's ma boy, spitin at youz!
Oooooooo he's got them Walmart subwoofers bumpin back there. It's a nice looking truck, too bad it's in such rough shape
It definitely needs some attention!
😂 they came with the truck boss I know they are crap
@@juanblanco1343 I only recognized them because they came in my Jetta too hahahahahaha
Yes definitely starter kit speakers 😂
Check the reservoir, it's only attached with clips. Drain, easily remove, clean,
new O-ring. Also check power booster for fluid, vacuum leaks can
cause lean code, spongy pedal. *"OLD"* cars?
Sick truck, I always liked the 2 door tahoe
This truck will be here for a while ....no shortage of work that needs to get done .
@@themechanic6117 My favorite was the Yukon Gt. My friend had a 2 door blazer like that that was stolen
That sucks, yeah I recently found out that these 2 Drs have a cult following lol
@@themechanic6117 Yea, those are pretty collectible honestly. Specially with like the leather interior and 4x4
This truck needs all the works and we're trying to ball on a budget lol
Wow your looking at a 200 part series . 😂😅
You already know.... 😫
That drum gauge is already set to 1/32 or 1 mm difference
So you measure the drum and then set the shoe so its just touching the tool
Maybe the ABS needs to be bleed if it has it. Or the new master wasn't bleed properly when installed
Thanks for the info! Didn't know that.
I've tried bleeding the abs already. I have so many hours invested in it and I still can't get a decent pedal. Initially there was like black sludge coming out the proportioning valve/ ABS unit . I wonder if the ABS is bad... my next video will be trying to get the knees to work with no success.
every gmt400 fix is gonna be, a while im in here might do this as well
Man if you make 2 hours video of this Tahoe Aquí voy a estar 😂😂 so go ahead 😅
The next video is definitely a longer one...
Good grief you got a lot of work ahead of yourself ! You can get her on the road safely , that’s if there willing to put money into the turd “ peace😂
That's the problem, we're trying to ball on a budget lol .
Time to get a new friend lol
🤣🤣
I checked the comments to see if anyone mentioned, I did not so if I am stepping on toes, I am sorry. I wanted to mention that your master cylinder looked fairly new. I imagine someone replaced it, and did not bench bleed it before installation. Hope it helps, and appreciate the videos sir.
I installed a new master and tried to bench bleed. It didn't make a difference. I still can't get the brakes to work on this thing
@@themechanic6117 that’s what I get for not waiting until the end. Lol. Glad to see you had the same thought process. I realize you are operating in the future from the videos, and my impatience gets the best of me. Only other thing I could think of that would make since then would be a pressure bleed. Good way to chase air out of a system or help find the weak point, like the brake hoses you pointed out that may be ballooning.
At this point I've replaced the master and both front brake Hoses. After hours of bleeding the pedal still goes to the floor . I'm not sure what's wrong with it. Initially I was getting black sludge out the abs module but now it's pure brake fluid. Everywhere I bleed at I now get pure fluid, no air. The brakes still don't work..... either I have to pull the master off again to bench bleed or the ABS module is bad..
@@themechanic6117 you maybe correct sir. ABS modulators can be holding trapped air as well, but it was fairly uncommon. But in TX we do not see your rust and corrosion much as well, so may just anecdotal. If you have the style I am thinking about these should have a bleed valve you can use to pull air from on the modulator valve itself, or if you can get your hand on an old Tech2, you can do an ABS assisted bleed sequence.
There is a bleed valve on the module and I've tried that with no success. My scanner has the function to bleed the air out the abs module, I've tried it many times with no success. I'm all out of ideas
Calipers frozen? Why were those rear lines unclipped?
PO chasing down a leak?
The calipers are not frozen. I checked them, they move just fine. I believe that line was replaced and just never done correctly
Dont LS Swap it just yet lol we gotta get brakes first hahaha
You need to replace the brake booster
👍🏿 versa cvt still going 185,000.. excursion v10 possible knock..Im good rebuilding the engine /trans.. still 1/2 the cost of a new car.. but may just sell it cheap.. wanted to keep it though.. wanted to get opinions but the wife blocks as always 🤣 pay for a diagnosis? No way jose😡🤣🤣
That's some great miles on the versa 💪 .
Lower control arms have about 6diffrent kind Goodluck getting the right one😂
Yeah I heard it can be almost impossible to get those .
Turd? Hah. Because we had lots of female customers, we were careful about verbiage. So…all cars are toads, lol.
😫🤣👍
Good video. Please learn the terms and name of the parts.
This is a out dated suspension setup, I don't get many car/trucks like this in my shop. Doesn't really matter if I know the terms or names. I try to remember them but I'm not loosing sleep over it . 😄
You certainly have your work cut out on that car.
Wait till the next video..... I really have egg on my face 😫
Why would you drive this when you knew it doesn’t have brakes
Just to see how bad it is 😁👍
John , You should have just sent the truck to the junk yard.
It just needs some love....and lots of money lol