Digital RGB working with non-Digital RGB header thanks to Deepcool's RGB Convertor.

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 404

  • @glcharlie
    @glcharlie 4 ปีที่แล้ว +100

    "Now let me repeat that again because even I'm confused" lmao so relatable

    • @hwsph
      @hwsph  4 ปีที่แล้ว +2

      😅

    • @floradelgado5171
      @floradelgado5171 4 ปีที่แล้ว

      @@hwsph sir I have a msi mag pylon case but my mobo doesn't have rgb header.. I buy rakk maris po and connected the fun of my msi case but the rgb doesn't have the slot. What can I do?

    • @kodfish101
      @kodfish101 3 ปีที่แล้ว

      @derDiamomd yes, what you do is plug the 3 pin argb product into the converter, than plug the converter into the 4 pin rgb header on the motherboard

  • @dazyde6261
    @dazyde6261 5 ปีที่แล้ว +13

    basically the disanvantage 4pin rgb header can only produce one color at a time. but 3pin argb header can produce multi color/rainbow/spectrum effect.
    what im trying to say is that using this converter multicolor/rainbow/spectrum effect will be disabled on your argb fans.
    correct me if im wrong.

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว +4

      Well i dont mind if the argb doesnt work, i just want to sync my argb case with my rgb mobo

    • @saptarshimozumdar1657
      @saptarshimozumdar1657 4 ปีที่แล้ว +1

      @@nunsiama just asking, in that case why id u get an ARGB fan, i mean you could have got a RGB one

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว

      @@saptarshimozumdar1657 its not the fan that is ARGb, it was the case lights in my scenario... its not a big problem but i would like to sync it with mobo ram etc

    • @saptarshimozumdar1657
      @saptarshimozumdar1657 4 ปีที่แล้ว +2

      @@nunsiama similar dilemma man, i wanna music sync my entire PC , have already done with RAM and my mouse, mousepad. But cant use ARGB fans coz i also have 4 PIN RGB :(

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว +1

      @@saptarshimozumdar1657 i understand.... so the mobo you got is rgb not argb?

  • @BRC_Del
    @BRC_Del 4 ปีที่แล้ว +6

    The colour flash is caused by a problem with the converter: When it's given a really low value of any colour (16 or less), it actually translates it to 255 (max value) instead. That's why it flashes so bright - Instead of being (for example) 15 Red, 65 Blue, it's 255 red and 65 blue. The converter cannot properly pass very low values of any base colour, and that often messes up rainbow effects too.

    • @hwsph
      @hwsph  4 ปีที่แล้ว +3

      thanks for the insightful comment!

    • @harveylabilles612
      @harveylabilles612 3 ปีที่แล้ว

      How to fix it sir??

    • @BRC_Del
      @BRC_Del 3 ปีที่แล้ว

      @@harveylabilles612 I don't think there is a fix, sadly. I still have the issue.

    • @harveylabilles612
      @harveylabilles612 3 ปีที่แล้ว

      @@BRC_Del may fb ka sir? Add kita

    • @harveylabilles612
      @harveylabilles612 3 ปีที่แล้ว

      @@BRC_Del sir may nakuha akong solution about sa flickering

  • @AllxhailxJamezy
    @AllxhailxJamezy 4 ปีที่แล้ว +2

    Found the video SUPER helpful. You answered all of my questions, and I didnt even have to ask!

  • @baclava1001
    @baclava1001 5 ปีที่แล้ว +1

    If it’s not working or only showing red and green: try simply unplugging the 4-pin connector from the motherboard, turn it around and plug it in the other way. I was just about to give up when I accidentally discovered this fix. Still doesn’t fix the problem with different lighting modes, but at least you get all colors and some control.

    • @hwsph
      @hwsph  5 ปีที่แล้ว +2

      Thanks for the tip!

  • @renebrune84
    @renebrune84 4 ปีที่แล้ว +7

    Man youve made my day, this is exactly what ive searched for, thanks _O_

  • @nel727
    @nel727 4 ปีที่แล้ว +3

    THIS IS WHAT I'VE BEEN LOOKING FOR, THANK YOUU

  • @arachno000
    @arachno000 2 ปีที่แล้ว

    thank god actually a video that gives proper informations about the converter. thanks guys! you made me understand it easier..

  • @Solisium-Channel
    @Solisium-Channel 5 ปีที่แล้ว +20

    thank you sir, you gave me all the information that i needed

  • @brodymathews756
    @brodymathews756 4 ปีที่แล้ว +1

    Wow, I am so glad that I stumbled across this video. I am about to build my first PC, and didn't realize that my MoBo didn't have any 3-pin headers. I had both my case and fan hub's 3-pin to plug in, so I am very thankful that this product was in stock. that you for the awesome video!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      Glad it worked out! Could you send us your specs so I can add them to the list of confirmed items which work with this convertor?

    • @brodymathews756
      @brodymathews756 4 ปีที่แล้ว

      Hardware Sugar I am still waiting on a part but it is a Ryzen 2600 + 1660 Super build. The mobo I am using is the Asus ROG Strix B450-F. I am going to hook up my upHere fan header to the converter, so I will let you know if everything works.

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      @@brodymathews756 👍

    • @plaxor
      @plaxor ปีที่แล้ว

      @@brodymathews756 I have the same board, does it work? sry for necro posting

  • @markwoodrum4077
    @markwoodrum4077 4 ปีที่แล้ว +3

    Thank you so much for making this video, because I just spent the last half hour trying to find a product that would do just this, and although I am tech savy I don't know all the nomenclature which greatly slows me down every ten years when I need to build a completely new computer.

    • @hwsph
      @hwsph  4 ปีที่แล้ว +2

      Glad you found it useful. I was in the same boat when I came back to PC building around 3 years ago after a long hiatus. So many new terms to figure out, AIO, RGB, ITX, nVME, the list goes on.

    • @Bond___007
      @Bond___007 2 ปีที่แล้ว

      I have a question did the converter work good ? I also have the converter but is is lagging I can’t really control the rgb

  • @slowryd3g
    @slowryd3g 4 ปีที่แล้ว +1

    Thank you for actually showing how this product works. Stay safe from Atsani!

    • @hwsph
      @hwsph  4 ปีที่แล้ว +1

      thanks, not so bad yet here in Manila

  • @SuperBabyToons
    @SuperBabyToons 4 ปีที่แล้ว +21

    jim moriarty

  • @drewtorres211
    @drewtorres211 4 ปีที่แล้ว

    I barely understood you, but you sure helped me TREMENDOUSLY!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      haha good to hear?

  • @aZryggs
    @aZryggs 4 ปีที่แล้ว +1

    i try with b450 tomahawk max and id cooling zf12025 fans. I can say it is not working. Most of the colors is flickering even on static and the color does not match with what you choose in the software.

    • @trixsumalinog6888
      @trixsumalinog6888 4 ปีที่แล้ว

      Thanks bro!! You save me before u buy zf12025 fans and Deep cool Converter

    • @aZryggs
      @aZryggs 4 ปีที่แล้ว

      @@trixsumalinog6888 however zf12025 do come with its own remote controller if you buy the 3 fan pack. You can only choose presets on the controller

  • @donangelobuena5102
    @donangelobuena5102 4 ปีที่แล้ว +2

    Been racking my head and searching for something like this for my MSI Gugnir case to sync with my MSI B450 Mortar Max. Thank you so much for this! Ordered one from your Shopee website hehe :)

    • @DailyFactFinance
      @DailyFactFinance 4 ปีที่แล้ว

      Btw I found out you can use your cpu fan header as it's also a 4pin

    • @Eduard0Nordestino
      @Eduard0Nordestino 4 ปีที่แล้ว

      What product did you bought? Same Mobo here

    • @cmp1459
      @cmp1459 2 ปีที่แล้ว

      Planning to buy this converter we have the same mobo sir. Oks ba sya iconnect sa led button ng case?

  • @ronjulienne7683
    @ronjulienne7683 4 ปีที่แล้ว

    Just finally understand after finding dump of tutorials here in YT!

  • @thereverendd00
    @thereverendd00 4 ปีที่แล้ว +2

    Question:
    I have a Tecware Forge M ARGB with a fan hub installed. Can I connect the 3 pin from the fan hub to the Deepcool adapter? Do I have to power both with SATA since the fan hub has already a SATA cable connected.
    Thanks!

  • @rapzyz
    @rapzyz 4 ปีที่แล้ว +1

    Hello can you help me with my problem? I connected everything right and already tried this on two different ASUS TUF B450M-Pro. The lights are flickering when a non-static color mode is selected in the software. Im starting to think that the Convertor I got is defective.

    • @harveylabilles612
      @harveylabilles612 3 ปีที่แล้ว

      I got the same problem..

    • @rapzyz
      @rapzyz 3 ปีที่แล้ว

      @@harveylabilles612 this product is a hit or miss. from the info i gathered, they work with others with the same components i mentioned. others also said that theirs work while others with same components say otherwise. i think its already safe to conclude that this product had a bad batch that are all defective we managed to acquire them.

  • @blaykeinnes-naoum6279
    @blaykeinnes-naoum6279 4 ปีที่แล้ว +2

    bruh you saved me and my mates pc build thank you

  • @AR19167
    @AR19167 4 ปีที่แล้ว

    Nice video detailing everything to take note of before getting this ARGB 5V to RGB 12V converter and testing it with Phanteks Halos both digital and non-digital no less (I only managed to use it with the Digital ones)! I remember asking if you had this in stock and sadly at the time it wasn't so I bought it from someone else. After testing it though the results I got were more or less the same in this video.
    While mine was on an MSI motherboard instead of an Asus one, it technically worked: the Deepcool converter on one end was connected to the 12V connector of the motherboard; while the other end was connected to a Phanteks Digital Controller Hub, which in turn connected three ARGB Phanteks Halos Digital Non-Lux and two ARGB Phanteks Light strips (all Phanteks products that I did buy from you). I was able to control them all using Mystic Light, although some colors are incorrect - I've only managed to show red, blue, yellow and green colors correctly.
    It does indeed seem to be the wiring being nonstandard as mentioned by some Amazon reviews that cause these incorrect colors. I ended up not using the converter and relying on the physical controller the Digital Controllerhub came with instead.

    • @hwsph
      @hwsph  4 ปีที่แล้ว +1

      thanks for the detailed feedback! good to hear that it does work with some hubs, although as you pointed out work is not 100% accurate as it only shows certain colors

  • @DIMcomTIM
    @DIMcomTIM 4 ปีที่แล้ว

    will he work with Be Quiet 500DX and 450b tomahawk max ? thank

  • @kforce2011
    @kforce2011 5 ปีที่แล้ว +3

    Great informative review.
    Question - can you connect a digital 3 way ARGB splitter into this hub to control lian li rgb fans? do you have to install 3rd party deep cool software or does it work with motherboard control software?

    • @hwsph
      @hwsph  5 ปีที่แล้ว +4

      Sorry, I've never tried it with a splitter or Lian Li fans so I can't say for sure. When the item does work you can definitely use it with the mobo software (like I do in the video where I use Asus Aura sync).

    • @kforce2011
      @kforce2011 5 ปีที่แล้ว

      @@hwsph thanks heaps man

    • @timbell8279
      @timbell8279 4 ปีที่แล้ว

      @@kforce2011 Hey Toyotarou. Did you end up trying a splitter here? Did it work?

  • @markdennebborbajo
    @markdennebborbajo 4 ปีที่แล้ว

    Just got a Cougar MX410 RGB - Mesh case. Are the fans that comes with the case compatible with this Gamer Storm RGB Converter? i have a 4 pin 12v RGB connector on my B450m Plus TUF Gaming motherboard. the mobo and RAMs lighting are already synced. just cant figure out if the built-in fans can be synced also.

  • @adysharkeye
    @adysharkeye ปีที่แล้ว

    Hello i have a deepcool ls 720wh and i want to connect the rgb fans from it to deepcool 5v to12 v convertor to my msi z 390 a pro motherboard . Is it possible if i connect the rgb cable coming trough the convertor to "jrgb1" port from my motherboard ?

  • @HBKCommish
    @HBKCommish 4 ปีที่แล้ว

    I have it. It only kind of works with Asus Aura. Only Red, Green or Blue works. And I have to click on the actual preset for that color. If it not 100% TRUE blue, it will not register. Also, effects don't work at all. Just straight solid color.

  • @stumphubby3338
    @stumphubby3338 4 ปีที่แล้ว

    Quick question, where do i put the three pin cables comming from all the fans? Im really stuck

  • @Sunny51de
    @Sunny51de 3 ปีที่แล้ว

    Will this work on Gigabyte's 4PIN Led_cpu0 header for led strips?

  • @UmairAslam
    @UmairAslam 4 ปีที่แล้ว

    So basically id you have 3 pin ARGB fans
    They'll only work as an RGB with this right?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      yup

  • @vinvlogsetc5576
    @vinvlogsetc5576 3 ปีที่แล้ว

    Will it be controllable via MSi's mystic light?

  • @blackriderph4340
    @blackriderph4340 4 ปีที่แล้ว +2

    Normal rgb lighting effect lang pala ang end result? Hindi po argb?

  • @igilav
    @igilav 4 ปีที่แล้ว

    I recently built my first ever PC and made the mistake of getting ARGB fans when my motherboard only has an RGB header. I now intend to add an RGB fan to go along with the three. If I get this adapter, will I be able to plug the 3 ARGB fans and the RGB fan into it and onto the RGB header of the motherboard?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      There is room on the convertor so you can plug an rgb fan into it, so you would daisy chain the 3 argb fans to one channel and then the rgb fan to another channel. That said this product is always a bit iffy, you're never quite sure what will work or not - so buy at your own risk.

  • @andreasn23
    @andreasn23 4 ปีที่แล้ว

    thanks for the help ordered halos digital rgb instead of halos rgb and i only had 2 4pin rgb on motherboard. Now when i see the converter works with phanteks halos i can relax and buy one.

    • @professor6371
      @professor6371 4 ปีที่แล้ว

      Bro? Is this okey to use kahit Id cooling fans yung bibilhin ko?

  • @shankyarora5110
    @shankyarora5110 3 ปีที่แล้ว

    Corsair ML 140 PRO RGB supported on this Hub??

  • @seonjie
    @seonjie 4 ปีที่แล้ว +2

    thank a lot , i mess up by those argb and rgb also , this video help a lot

  • @MrDewallday
    @MrDewallday 2 ปีที่แล้ว

    Hello po. Have you already tried syncing the non digital and the digital rgb when they are plugged together in the converter? also, any updates as to how many ARGB fans we can connect to this hub? Thank you po

  • @UNKA757
    @UNKA757 4 ปีที่แล้ว

    I would get 2 Hubs, 1 for 12v and one for 5V and run them off the converter for tons of ARGB/RBG goodness.

  • @rensquared24
    @rensquared24 4 ปีที่แล้ว

    If ever this converter is used, can you still use software to change the colors since it's connected to the 12v 4pin header in the mobo?

  • @thecerrus
    @thecerrus 4 ปีที่แล้ว

    Does someone know if this will work with Razer Synapse(Overwatch etc.) if u install the aura sync expansion?
    I'm interested in buying a converter but i dont know if this will work.

  • @daenielmojica8242
    @daenielmojica8242 3 ปีที่แล้ว

    I have a msi 5v rgb. Will this product work on that rgb lights?

  • @jaredabaja5233
    @jaredabaja5233 4 ปีที่แล้ว

    Sir. I have a gigabyte ga-ab350m gaming 3(no rgb headers) but it has 4 pin (hybrid fan headers) and I bought a AIO that needs 3pin 5v. question is can i use this item to controll the rgb of my pump?

  • @wckdkeinthxz9527
    @wckdkeinthxz9527 2 ปีที่แล้ว

    Gooday HS! Does msi b450m mortar max supports argb fans?

  • @earathou
    @earathou 4 ปีที่แล้ว

    when will deepcool uses the VDG (addressable) w/c has more color choices vs the 12V GRB?

  • @moviecliffs
    @moviecliffs 2 ปีที่แล้ว

    Can i use argb 3fan 3pin 5v for that converter in my 12v 4pin rgb mobo ?..

  • @whysukuofficial1331
    @whysukuofficial1331 4 ปีที่แล้ว

    question , i just bought PSU and it has RGB on its fan but my motherboard does not have anything calls RGB or ARGB header (Any rgb pin doesn't available on ASUS B450m-K Prime) so how do i solve this solution ? does it have any converter to rgb ? (PSU : avf gaming freak prima gfp rb500)

  • @rueniss
    @rueniss 3 ปีที่แล้ว

    Hello, I have a set of 3ARGB 5v fans (Darkflash) and a set of 3RGB 12v (Deepcool) . The 12v have a (I think PWM) port for the fans that connects to my mobo's 12v 4pin rgb port. If I plug that hub/port where the deepcool fans are connected here, along with the darkflash ones (5v 3pin ones), will it work?
    If it won't work, will buying a 4pin splitter and plugging this converter and the port from the deepcool fans work?
    Sorry I am new to all these things. Thank you.
    And btw your videos have really helped me as someone who had just started taking interest on building pc's. 😊

    • @hwsph
      @hwsph  3 ปีที่แล้ว +1

      thanks for watching our videos on yt :)
      For tech questions we encourage ppl to post to our forum, pm.hwsugar.ph/
      Why?
      1. It's easier to track questions there (YT/FB is a mess when it comes to that).
      2. Everyone from our staff can weigh in, not just me. Everyone on the internet can weigh in, not just me.
      3. It's searchable so everyone online who might have the same problem could benefit from the question :)

  • @juliopablo3997
    @juliopablo3997 4 ปีที่แล้ว

    I have a question po hope you can answer... my 4pin rgb doesnt sync with my 3pin rgb... like i set the color to violet all turns to violet but the 4pin rgb turns yellow...
    same with other color it turns to a different color from what i set it to be...

  • @timogarcia17
    @timogarcia17 4 ปีที่แล้ว

    I'm planning to use on 6 DR12 Pro fans + a coolermaster cpu cooler na. May naka try na kaya?

  • @30_muhammadarrifqi5
    @30_muhammadarrifqi5 4 ปีที่แล้ว +1

    Does this work for Controller Hub too?

  • @campbellpowell3815
    @campbellpowell3815 4 ปีที่แล้ว

    I have addressable fans in my PC but i have a 12v 4pin rgb header and the fans in my computer are 5v 3 pin i was wondering if i could still use this product

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      Yes this is exactly the case where you would want to use this product. Addressable rgb is the same as digital rgb. So you have digital rgb products that you want to use with your non digital RGB motherboard header.

  • @JasonVLOG1987
    @JasonVLOG1987 4 ปีที่แล้ว

    hellow boss,. i have a problem to my new ML360L cooler master water cooling. because it is 3pin 5 volts, suddenly my board TUF b450m-pro gaming has no 5v 3pin and the water cool is not use.. possible this device of yours can work? please reply

  • @nikkojoson
    @nikkojoson 4 ปีที่แล้ว

    can this be used for asus b450 prime to aura sync darkflash fans?

  • @mauric7e
    @mauric7e 4 ปีที่แล้ว

    So i have an RGB-controller for my 4 rgb fans. If i want to connect them to the MoBo than how? If i use the RGB 4-pin header am i able to use Sync like asus aura? If i connect the controller to the 4 pin header does that mean i cant use any more RGB fans? I only have 1 4pin RGB header.

  • @ritinramola
    @ritinramola 4 ปีที่แล้ว

    Can i plug in 2x Antec prizm ARGB fans in the convertor ?

  • @dantepelino8041
    @dantepelino8041 3 ปีที่แล้ว

    How many 5v 3pin slots on the converter?

  • @ZEROBYTES
    @ZEROBYTES 4 ปีที่แล้ว +1

    Does this work with my BE quiet 500dx argb 3 pin connector to this 4pin on my rgb b450m mortar max motherboard

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      the convertor does well with just 1 or 2 fans attached to it, I do not know if it will play nice with the argb connector of your case
      if you do try it please let us know how it went

    • @ZEROBYTES
      @ZEROBYTES 4 ปีที่แล้ว

      @@hwsph works completly fine with my case! I've done a quick video of it on my channel!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      @@ZEROBYTES thanks for the feedback, have added the 500DX to the list of confirmed working :) I watched your video, nice looking case!

    • @ZEROBYTES
      @ZEROBYTES 4 ปีที่แล้ว

      @@hwsph cheers mate! :D

  • @trollking4804
    @trollking4804 4 ปีที่แล้ว

    Can I connect other accessories to other accessories' argb controller to control the lighting effect?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      haven't tried it myself but that probably won't work, this is a finicky thing

  • @erianelingon5208
    @erianelingon5208 4 ปีที่แล้ว

    Hi, I'm just wondering because I'm planning to upgrade to an all Deepcool aio cooler and case fans. Will I be able to use 4 pcs of 5v case fans then put it in a fan splitter, and then plug it in to one of the sockets on the converter. For the aio i'll put it in the other socket of the converter. Will it sync? Thanks!!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      Eriane Lingon tbh I do not know if that set up will work. Generally the convertor does not play well with fan hubs.

    • @erianelingon5208
      @erianelingon5208 4 ปีที่แล้ว

      @@hwsph that's a bummer, but anyway thanks for the fast reply! I appreciate it

  • @cristophersalguero5788
    @cristophersalguero5788 4 ปีที่แล้ว +1

    Does anyone knows if it works with the mystic light on a MSI B450 gaming plus max?

  • @alexsusboyaoyao6055
    @alexsusboyaoyao6055 4 ปีที่แล้ว

    I have the same rgb flickering issue with my converter. Every effects beside static is flickering

  • @Chansanity
    @Chansanity 4 ปีที่แล้ว

    I just want to ask. If i have an asus rog led strips which is 3 pin 5v, can i use this if i dont have 3 pin 5v on my mobo?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      in theory, and assuming you have a 4 pin rgb header on your mobo, yes

  • @XX88Dante88XX
    @XX88Dante88XX 4 ปีที่แล้ว

    I have a question, I have a Asus TUF Z390, its has only 12v RGB headers, and I bought some Cooler Master MF120 Halo Fans, that are 5v. I connected them to this Hub and it only work 100% with pure Red, Green or Blue, any other color in between stars to twitch a lot. Its a deffective unit or something else?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      It sounds like the convertor is working but it's just not fully compatible with either the fans or the mobo. From my experience if the convertor is defective the fans won't light up at all.

  • @JiruTV
    @JiruTV 4 ปีที่แล้ว +1

    Hi! will this work with MSI's Mystic Light? I have MSI B450m Mortar Max with all non digital RGB ports. I've been using PC Cooler RGB fans and I'm planning to change it to ARGB Fans. Hope someone had tried it :)

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      What argb fans are you thinking of getting?

    • @JiruTV
      @JiruTV 4 ปีที่แล้ว

      @@hwsph Planning to get PC Cooler too but ARGB 5v pins. Will it produce a rainbow color? or it will stay as monocolor?

  • @zukarinjam4887
    @zukarinjam4887 4 ปีที่แล้ว

    aura sync is not working in my PC COOLER argb fan with TUF b450m.. but works on TUF x570 with same pc cooler argb fan..

  • @xMayerb
    @xMayerb 4 ปีที่แล้ว

    can I connect to the Aigo Darkflash 5v hub and connect the deepcool 12v to the 12v gigabyte card?

  • @mclovinsplayground6232
    @mclovinsplayground6232 4 ปีที่แล้ว

    Hi! can the Deepcool RGB Convertor work with an MSI z130a Gaming M7 mother board? I bought this convertor and I somehow can't find or have no clue where to put it.

    • @ItssMitch
      @ItssMitch 4 ปีที่แล้ว

      It will connect to any 12v 4-pin RGB connector

  • @G4laxyZBoltZ
    @G4laxyZBoltZ 3 ปีที่แล้ว

    I have this MSI Mortar Max B450M and Rakk Maris Abyss But didn't sync the rgb MSI Mystic Lights. I installed it properly SATA and ARGB 4 pins. Pls help Thanks

  • @jessaXD
    @jessaXD 4 ปีที่แล้ว

    Does this converter work with x470 Aorus Gaming 7 and Deepcool CF120?

  • @zekkicollectibles5435
    @zekkicollectibles5435 4 ปีที่แล้ว

    Hi last time I bought "thermaltake H200" in your store with my other account. I have some question about "Deepcool RGB Convertor 5v to 12v RGB Transfer Hub" is this gonna work in thermaltake H200 RGB to Asus aura sync mother board with +12v GRB?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      I think you asked the same thing through our Shopee page :p As I answered there I really do not know, it's hit or miss with this item.

  • @partidagamingofficial6511
    @partidagamingofficial6511 4 ปีที่แล้ว

    what is the complete name of motherboard that u use in demonstration??

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      not at the shop now but if I remember correctly it's the rog crosshair vi extreme

  • @sigbingpula
    @sigbingpula 3 ปีที่แล้ว

    Hello sir, can you confirm if IDCooling XF12025 ARGB works well with the convertor?
    I used Darkflash C6MS ARGB 3in1 pack (no controller). The main fan is not syncing well while the two fans were okay.
    My motherboard is Asus A320M ex-gaming with 12v RGB header.

    • @Chamotmot
      @Chamotmot ปีที่แล้ว

      Any updates from you, sir? Planning to get an ARGB AIO too and wanna buy this ARGB convertor for my 12v RGB header board(Strix B450-F V1). I don't mind the argb lights on my AIO cooler, i just wanted to sync it with my mobo.

  • @AndresRojas-ld8ho
    @AndresRojas-ld8ho 4 ปีที่แล้ว

    Do you know If It works with a Thermaltake Commander C33 - Asus TUF x470 plus?

  • @Low2Max
    @Low2Max 3 ปีที่แล้ว

    Does it work with rakk spectre II????

  • @adrianlloydrosa7935
    @adrianlloydrosa7935 3 ปีที่แล้ว

    is this compatible for darkflash aio twister dx 240??

  • @singwithme4480
    @singwithme4480 4 ปีที่แล้ว

    Hello! Jus tnew to this channel and new to pc building. I have a Gigabyte b450m-ds3h with only 1 system fan and rgb header. I plan to get deepcool gammaxx aio L240 and this rf120 3 in1. My concern is how can I sync all the fans(5) and rgb withi only one fan and rgb header? Can i use a fan hub for the system fan header for 3 rf120 fans and another fan hub to thr cpu fan header for the aio pump and 2 radiator fans? Thank you!!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      Usually you can daisy chain rgb fans together and they all plug into the rgb header. Tbh I've never tried daisy chaining 5 though. For fan power Deepcool has an inexpensive fan hub, the FH-04 which has 4 ports or the FH-10 which has 10 ports. I've never installed an L240 V2 so I do not know if it needs a usb header on the mobo. (The pricey AIOs from NZXT and Corsair require a USB header but I do not know if this is true for the L240.)

  • @zekkicollectibles5435
    @zekkicollectibles5435 4 ปีที่แล้ว

    is this gonna work in thermaltake H200 RGB to Asus Aura Sync?

  • @faizaan7
    @faizaan7 4 ปีที่แล้ว

    Hi bro on my motherboard i have a 3pin addressable header but i need the 4pin because my fans rgb use 4pins so will this converter , convert it from 5v-12v or only 12v-5v???

    • @hwsph
      @hwsph  4 ปีที่แล้ว +1

      it won't work, this takes a 3 pin rgb product so you can plug it into a 4 pin rgb header on the mobo, it won't work vice versa

    • @faizaan7
      @faizaan7 4 ปีที่แล้ว

      @@hwsph ohh thnx bro im just going to save up for a new motherboard

  • @buhaynganaman
    @buhaynganaman 4 ปีที่แล้ว

    Nice info vid. sir ask ko lng, is it possible to add fan and sync it with my existing ARGB fan(ID Cooling zoomflow) if yes how po?..thanks in advance

  • @minarhossainjr
    @minarhossainjr 4 ปีที่แล้ว

    Bro how to matching ta color Argb and rgb fan

  • @Baetokki091
    @Baetokki091 3 ปีที่แล้ว

    How to connect 6 aRGB fans on 4pin Mortar Max RGB header?

  • @andothings
    @andothings 4 ปีที่แล้ว

    Can I connect CM MasterFan MF120 ARG to this badboy?

  • @juliuslagman6563
    @juliuslagman6563 4 ปีที่แล้ว

    Great video! YES it will allow you to use your ARGB on your RGB mobo. But will you able to fully use its ARGB functions? Or will you be limited to its RGB functions only(even if you're plugging an ARGB)? Cause that's what I heard. Thanks in advance for your help!

    • @hwsph
      @hwsph  4 ปีที่แล้ว +1

      as far as I can tell you're limited to rgb functionality

    • @juliuslagman6563
      @juliuslagman6563 4 ปีที่แล้ว

      @@hwsph Thanks for this! I Appreciate your reply 👍

  • @mathewagustinbella
    @mathewagustinbella 4 ปีที่แล้ว

    Supports YGT ARGB 1250 to AORUS B360 Gaming 3 ?

  • @romebenavides1406
    @romebenavides1406 4 ปีที่แล้ว +1

    Hi can i convert my argb to rgb. I want my argb fan/hub to sync with my rgb aio cooler. Thank!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      In theory this should let you do that but sometimes it doesn't play nice with fan hubs.

  • @markgeromelelis764
    @markgeromelelis764 4 ปีที่แล้ว

    Will it work with 5 fans Darkflash argb with hub??

  • @werox4555
    @werox4555 4 ปีที่แล้ว

    Is there any adapter for 6pin hub?

  • @dawsonsavell2932
    @dawsonsavell2932 4 ปีที่แล้ว

    How will I be able to control the colour of the fans please respond!!!!

  • @nunsiama
    @nunsiama 4 ปีที่แล้ว +2

    Got a b450 tomahawk max rgb with antec dp 501 argb case, will this work?

    • @Jaycolley8
      @Jaycolley8 4 ปีที่แล้ว +1

      Zee Siama I am also wondering this, I am going to order one tonight and see if it works with the tomahawk max

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว

      @@Jaycolley8 its on the way... Why dont you wait a little longer and i will give you update... If you can wait... To see how it works... I heard that some rainbow colors are not supported

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว

      @@Jaycolley8 wellpp does'nt work

    • @Jaycolley8
      @Jaycolley8 4 ปีที่แล้ว +1

      It came today and I can’t get the fans to light up at all :(

    • @nunsiama
      @nunsiama 4 ปีที่แล้ว +1

      @@Jaycolley8 well for me it was for the case, the case 's pin was too small for the header :(

  • @erinegonzales87
    @erinegonzales87 4 ปีที่แล้ว

    i would like to recommend if you try it to other Deepcool products like the Deepcool castle 240EX, and how many Rgb fans, and if you can use a RGB splitter to it (ex.Deepcool Converter+Deepcool Castle 240EX+4pin RGB Splitter+Deepcool RF120 x6. I think it will give information for your viewers. especially Deepcool products are most reliable and affordable. Thanks!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      Thanks for the suggestion. Tbh we'd love to do something along those lines but budget wise it's a bit prohibitive :D We'll see if we can work something out to make a series like that doable on the financing we have.

    • @gdnraq6797
      @gdnraq6797 4 ปีที่แล้ว

      sabi ko na nga ba yun ang dahilan kung bat hindi fully utilize itong converter sa review

  • @Divitriv
    @Divitriv 4 ปีที่แล้ว

    I have 3 wc fans with 3 pins (aourora 360 xigmatek) and 7 fans with 3 pins (aquarius plus xigmatek case) ... Actually im getting constantly 5000rpm and cant stop it changing some pwm settings (because is a 3 pin connector). Could this adapter help me to take the control of my fans rpm? Thanks for the video.

    • @hwsph
      @hwsph  4 ปีที่แล้ว +1

      No this is meant to control rgb not fan rpm. You could try something like the Deepcool FH-10 Fan hub, basically stick your 10 fans through there and it might give you some pwm control, not sure though.

    • @Divitriv
      @Divitriv 4 ปีที่แล้ว

      @@hwsph I will try with it, thanks!

  • @majing20
    @majing20 4 ปีที่แล้ว

    Does it work on a 3pin mobo? Since my rgb fans are 4pins i connot work it with my mobo.

  • @glenneric5520
    @glenneric5520 4 ปีที่แล้ว

    what software do we use to control the colors ? my motherboard is B450 A pro max

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      if it works you should be able to control the rgb via the software for your mobo, in your case msi mystic light

  • @johngojocruz543
    @johngojocruz543 4 ปีที่แล้ว

    Saw this video bought mine but is it still possible to control the light ?

  • @mitchdorsey6293
    @mitchdorsey6293 4 ปีที่แล้ว

    How many ARGB ports are on there on the converter?

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      just 1

  • @cmp1459
    @cmp1459 2 ปีที่แล้ว

    Hello sir. Masisync po ba netong converter sa mystic light yung 4pin na fans? Thanks!

  • @kjtorres2411
    @kjtorres2411 4 ปีที่แล้ว +1

    hello po,
    possible bang ung controller na 3 pin ng aio na argb kayang maconvert nito ung 3x aio fan if plug ko yung 3 pin to 4 pin? thank you

  • @totekdavid8734
    @totekdavid8734 4 ปีที่แล้ว +1

    sir meron akong darkflash dr12 pro 3pin set with hub. pano ko po ma ssync sa b450 tomahawk max na 4pin header?patulong naman po.. ty

    • @reggrubyo1
      @reggrubyo1 4 ปีที่แล้ว

      I got the same issue, i have 7 fans of DF dr12 pro with hub.. im thinking if possible ba xa masync sa mobo na asus tuf b450 na wlang 3 pin rgb header.. tuf b450 only have 4pin 12 volts rgb header..im hesitant to buy yhis deepcool converter baka masunog lang ung pc ko pag namali pa ako ng kabit...

    • @reggrubyo1
      @reggrubyo1 4 ปีที่แล้ว

      Sana nmn magreply sila dto.. ty

  • @little__secret_9119
    @little__secret_9119 3 ปีที่แล้ว

    Question: Bro how many argb fans i connect in this converter???? Btw Nice video 😊🥰

  • @HugoPimentel77
    @HugoPimentel77 4 ปีที่แล้ว

    hello brother, i can use this product on Gigabyte H310M S2H?

  • @XDking9
    @XDking9 4 ปีที่แล้ว

    Hi i just bought this piece of junk but it doesnt convert the colors at all! Any suggestions? static red signal gets displayed as blue for example, fadeout/in is just flashing random colors and even composite colors just display random flashes on the argb fan.(the normal rgb light are showing correct colors meanwhile) getting deperate here pls help!

    • @hwsph
      @hwsph  4 ปีที่แล้ว

      XDking9 what mobo are you using and what RBB products are you connecting to it?

    • @XDking9
      @XDking9 4 ปีที่แล้ว

      @@hwsph asus rog strix z370-g it doesnt have an rgb header so im using a deepcool 350 controller as an input