Lian Li Unifan V1 vs V2 - which is better?
ฝัง
- เผยแพร่เมื่อ 9 ธ.ค. 2022
- Get an iFixit kit for yourself or someone you love at - amzn.to/3IDDkj9
Get your JayzTwoCents Merch Here! - www.jayztwocents.com
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2JayzTwoCents - วิทยาศาสตร์และเทคโนโลยี
![เปิดบ้าน เปิด Supercar อั๋นโอกิ เคยเอา rolls Royce เเลกพระ องค์ละ 100 ล้าน l [Nickynachat]](http://i.ytimg.com/vi/FeGwJwXauZ0/mqdefault.jpg)
The new shipment of the SL V2 (available in late December) will include longer cables (550mm for the controller cable, and 250mm for the bridge cable).
which regions will these shipments with longer cables be available? And from which sites/vendors?
I already have all my v2 fans. And would love some longer cables how can i get these?
Is the control box now the same as the control box with the strimers?
thanks guys
thank you for addressing your customers concerns
Those fans are great but for me it's mind-blowing that fans who cost that much don't come with longer cables or at least include cable extensions in the box.
They are meant to be chained so you're expected to have one fan close to the power unit.
@@dzello the issue with expecting something is that's not gonna always be the case. Their $35 a pop they can and should come with longer cables, there's no excuse for them not to.
Still cheaper than corsairs offering by a good bit
@@Raven.Bloodrot If it's not the case, then you should buy another fan?
If you buy a fan meant for one thing and then complain it doesn't do another thing, that's on you.
@@dzello No, the fan cables should be longer. Did you not watch the video and hear Jay say that is his complaint about the fans? There is no reason they couldn't include different length cables with the fans, especially since they use a proprietary plug that can't use a standard extension cable.
I kinda miss the first iFixit promo ending. "iFixit explosion! *explosion effect*"🤣🤣🤣
Hahaha I miss the one that says "REFRESHING" hahaha
My favorite ad ever 🤣🤣
Man I can’t find the video of the first one they had 🤣🤣🤣🤣
I remember when I replaced my Corsair fans with the SL120 Uni Infinity fans. Went from 18 individual cables coming from the 9 fans, to 3 cables from 9 fans. Now I jumped to the O11D Evo where I could add a 10th exhaust fan on the back. Only one additional cable. So I love the solution Lian Li has come up with because it has made cable management/cleanliness easy. However, I agree that they should add longer cables with these. It isn't such a big deal in smaller form factor cases, but if you are in a bigger case where distance to the controller comes into play, these shorter cables could be a problem. At the very least, Lian Li should make extensions for the proprietary connectors. The easiest solution. Given the fact Lian Li typically listens to their customers though, there is a very good chance these issues will be addressed in a V3 or they will make connector extensions to address concerns. Either way, still very nice fans. Pricey, as Lian Li products typically are, but nice nonetheless.
I have these in a corsair 7000D airflow, front, side, top and the back, not a single extension cable is used and they all reach my controller, there is no problem for me
@@voodoowill4685 Yes, but to be fair, in your 7000D, the connectors from every set of fans is at the top. You can basically run every cable from those fans along the top of the case and directly to a controller placed higher up, making it much easier. I had a 5000D before swapping to my O11 Dynamic Evo. Same thing, just one less fan in each row. So I get it. But if the 5000d or your 7000d had a row of fans on the bottom or on the PSU shroud as well, those shorter cables would become an issue reaching the controller. I think that is what Jay was getting at. Although I don't share his "gloom & doom" regarding these fan cables, I still think it wouldn't hurt to make them a bit longer anyway to avoid any issues someone may have. Not 50% longer like Jay suggested. Just a bit longer in general. Or simply sell a connection. I have seen this brought up on Reddit a few times by users, so some people are obviously experiencing what he is talking about. But again, Lian Li is a solid company. So I could see them addressing it anyway.
Btw... Love the way these fans look in the Corsair Airflow chassis. Good choice!
@@voodoowill4685 thanks for that ,i'm about to ditch my corsair fans in the 5000t ,this made my decision easier 👍
@TKT yea I'm there with ya on that one, dropped 300 on fans and now they have an improved version and it will cost me 430 for a new set
Ditched 6 of my QL120s in an 011D case as well. Amazing how much cables I’ve gotten rid off. Next thing in line is the Corsair AIO. Slowly starting to phase out all the Corsair products (except PSU) of my build.
Love to see them working on this design. Bought the first version when you did the first video on them, I absolutely love the concept. They still have a bunch to fix (like length, their BS connectors and so on) but they are on a good trajectory.
As a SFFPC enthusiast, 15mm slim fans with that cableless connection would be incredible
This x1000
I just completed my new PC build with the SL V2 fans and everything worked great. Super quiet and look great! I do agree with the cable length. Too short limits how well you can manage the cable routing in the case. A shorter cable does not make it easier but in my build, all seemed to work out. Thanks for the vids!
"Every.Inch.Counts."
- JayzTwoCents, 2022.
Lian Li has always been amazing but they are on their A GAME in recent times for sure! I have Lian Li Cases but I gotta get these fans! FANS! Probably the most overlooked portion of every build really.
every time I watch one of your vids I learn something new! so thankful for that! built my second PC after 9 years of my first build, and have the SL Infinity and did not know those tabs could be popped out, wow just wow, my build is so much cleaner now, those tabs annoyed me.
I just bought a Skytech Chronos and can't wait to tear it down and put in some upgrades. Thanks, Jay for the great videos. Wish me luck.
Lian li in the next version, should find a way that you could run the wire through a channel along the sides of the fans. It would be super convenient for cable management
I really hate cables, Im willing to ditch HDD in my next build after 6 years. Thats how much I hate cables.
@@fynkozari9271 Oh I'm already there. All my drives are m.2s and I've never looked back. pcie5.0 m.2s are coming out Q1 next year too.
@@BigKevSexyMan I'm going to replace all of my current drivers with a single M.2 NVME drive in the future. Just one large capacity drive to replace both my small 500GB M.2 and 2TB SSD would be nice. Plus it would rid of a power cable and SATA cable that I wouldn't need to fiddle with.
@@Slane583 As much you'd like, that's not going to be practical since game installs are humongous. You are going run into limitations be it cost and compromises especially if you want solely want to use PCI-E 5.0. I'd recommend looking at PCI-E 4.0 for your game drive (Direct storage) and general use storage at PCI-E 3.0 as that would substantially cheaper. Other limitations will be thermals so I'd recommend getting a cheap m.2 nvme heatsink that has a underside plate that can used as well.
@@Slane583 NEVER EVER use only one SSD for everything (OS, files, game installs, etc).
Speed performance drops the more you fill up the SSD with data. The smart way to do it is use one SSD (like a 512GB) for the OS and another large SSD (like a 2TB) for your files and game installs.
It would be great to see a proper comparison between the most well-known brands and their fans in terms of airflow, noise level, required software (which can eat up resources) and so on.
GN has both industrial fan tester and soon should start making videos on them
If you avoid RGB - you don't need any additional software.......
@@seanthiar Which is 100% irrelevant.
You only need to run RGB software once. After that most RGB will remember its setting without the software running. I can't say the same for fan curves which is one of the reasons I prefer controlling fan RPM from the motherboard.
Optimum tech has done this - just go watch
Hi Jayz, I enjoy your content and I have a build that incorporates a lot of Lian Li stuff including the first gen SL fans. I like them but they wouldn’t be my first choice in another build.
Ive been using them since L-Connect 2 which worked but had limited functionality. At first my fans could produce a nice white colour with a warning that would come up not to do it at full brightness because you would burn out the controller (or something). They have since changed it so the fans now only produce an off white colour (blueish). There is also a colour difference between the 120 and the 140 fans and you have to manually tweak the colour slider bars to get the fans to produce the same colour.
There are a quite a few colour themes you can choose from and some are even directional that are supposed to go from one side of your case to the other. The problem is there are no options to reverse the direction of the light on individual sets of fans because some banks of fans are turned the opposite way to hide the wires at the back. So you have a directional theme where lights are moving in different directions (if this makes sense).
The L-Connect 3 software has had some major bugs and flaws since launch and Lian Li has been very slow to come out with updates. Lots of functions still don’t work. In my opinion there software department needs to be improved and not just be an afterthought.
Another good year of great content this is one of my favourite channels Thank You and your team for all the hard work.
Love the concept of the Unifans. Looks like v2 has some great ideas for even further reducing the amount of cable management required, which is fine by me!
Welp, the V1's were already super compelling because of that daisy chaining connection. Now, with the V2's having that extra cable for the wired daisy chain, I wouldn't mind having them in my case. V2 Infinity? Please, Lian Li
I agree I would much rather manage longer cables than have cables too short. Longer cables are easier to manage too because you have much more flexible cable routing options than short cables. You actually need longer cables to manage them better in my opinion. Crazy to me that they charge that much for fans and don’t have any extension options. But I do like the look of them and considered the infinity for my last build. Cost wise it wasn’t worth it to me and I spent money on other components that matter more.
I’m running 10 Lian Li Infinity fans in my Lian Li EVO XL. Beautiful with great airflow, 2x3 bottom and side inflow, 3x1 top+rear exhaust. Because they daisy chain, all 10 fans only use 2 module connectors. Very easy and I couldn’t be happier!
Took over 18 months to get my Unifans...because Jay got them all...LOL...but they are AWESOME. Cleaned up a mess of wiring for sure. I only have 3 in my case, but they are AMAZING. SUPER SUPER quiet, well built, and look amazing.
Jay you can change the cable direction, taking the plastic cover off you can swap it :)
I'll be going for these over the infinity just for the consistency of the fan design. The SL Infinity needs to have that infinity effect on the back as well, or we should be able to purchase those fans choosing which side it's on (front vs back version), otherwise you just end up with diofferent looking fans in your case even though they're from exactly the same set.
exactly on point! my reasoning as well for going with the V2's
hmm apparently you can now buy "reverse fans" so I think that would fix the issue
@@jean-phil Not if you want 140mm reverse fans it doesn't.. 'cause they're only available in 120mm size
Thought you were going on vacation. Happy for the content
Been watching all kinds of videos from you to rebuild my computer after my last one was stolen, was thinking of these fans and cable turned me off them Thanks for the videos man accurate info and good info love it
I've mentioned this before, but the V2's airflow at 1000RPM is exactly the same as the V1. The extra 100RPM is what is making those stats higher.
who tested that? I'd like to look at a more technical review.
I really doubt that's true. I already noticed the difference in thickness, on first sight although it's subtle. When it comes to speed there is a point of diminishing returns where 100 rpm of speed at the top end is not going to matter, versus static pressure and overall cfm's produced as well as how the air is handled from the design is going to make the most difference
@@ravisieun8218 I'm afraid it is true. I own both SL versions, and the infinity fans. All three versions are within 1.7 CFM of each other at 1000 RPM. The SL INF have the best static pressure out of them all, however, all three versions are poor for radiators unless you run them at 100% constantly.
Oh really now....Let's submit this theory to Steve at Gamers Nexus and see what he says then. He actually has the proper equipment to actually test this theory of yours out.
Hmm looks like perfect fan to place under my mesh chair aimed to put out air upwards during the summer.
I had a clearance issue on the v1 with my AIO and had to sand down the mount for connecting another fan. Glad to see they resolved this issue!
That ifixit ad was one of the funniest things ever and simultaneously made me want to buy ifixit more than any other ad I’ve seen
I used 9 Infinity fans in my recent build and didn't have any issues though agree that cable length as shown in this video could be a problem, and easy in-production fix for Lian Li.
They still need to fix the L connect start-up issue though - the software doesn't start minimised despite having the option. I also run the Lian Li AIO and it's nice having the ability to run everything into a single controller.
lol holy shit 9? must be nice to be rich ;) hehe.
I've noticed this as well. The ability to control case fan speed based on GPU temp has overcome that annoyance for me, but it does remain an annoyance.
At least your setup of Lconnect works, i had problems with it on z690 extreme and now z790 hero, it isnt responsive , click on something and 30 seconds or more later it recognises click. I tried on a new win 11 clean install , then with newest drivers , then with asus armory crate ( i know armory crate is crap had to try) also tried the usb port swap trick. And firmware is latest of testing , 1.8. 10 SL140 fans.
@@alphadragongamingFTW just gotta hustle harder 💯
I have not had a problem with the software starting maximized on boot when I used it that way. Now I am only using it for the RGB so I don't have to run it every boot, only when I want to change the effect. Since I am controlling the RGB using the motherboard I never have to run the L-connect software at all anymore.
Hi Jay! It looked like a Y-splitter would be the perfect solution to the 3+1 fan setup you demonstrated. One controller connector for 16" splitting to two fan connectors for about 8". What do you think?
The Cable for in between the fans is the one thing that has always been missing with these fans IMO and I'm gald they added it in the end!
That this was the best video you’ve made I learned so much from this video. Thank you for basing it.
Sent mine back to Supplier. As much as i liked them, the software WOW sucks. Soon as i open L-Connect 3 it Kills 3 RGB lights, fans still work, but no RGB on 3 fans, along with no control over fan RPM. Went back to Argus Monitor and there is no doubt this is one of thee best control software out, yes you pay for it, but well worth it :)
My idea would have been to put the connecting ports on every side of the fan and have a little cap with a groove for easy removal and swap around. So basically if you had 3 fans but the cable wouldn't reach from the ends, you could just plug it into the side of the middle fan. And still daisy chain to the front, back, side or bottom fans. So wherever you needed the connector you could just connect to the fan that was the closest to the grommet port for easy management.
Just had same exact idea 😁😁👍👍👍
That would make them too expensive.
@@OriginalMergatroid think about how much you spend on fans and parts just too find out your don't have the right parts and have to buy more. I'd rather buy all my parts in one go that I know will work than have to go back and forth getting what I need. But I get your point.
Thanks Jay, extremely useful information on those fan setups... :)
Im currently running 8 of the 1st version of these on 2 radiators and they are awesome. Have had them for a few years now and so far other than one fan having a few lights die its been solid
i have the v1 of these fans and only have had them for about a year now and half of them seems to have dimmed compared to others. Everything is set up the same in the software. I think my next build I'm going with non-rgb fans.
OR you could get the V2s to test if the problem is the same
They do have problems with the LED so maybe you'd wanna check if yours qualify for replacement.
7 of mine got their white led malfunctioning & becoming yellowish. They're helpful with the return & replacement.
or never put them on like i do.....save the eleccy bill
If you have extra 5mm space, the Phanteks T30 (which are 30mm thick) are probably the best non-RGB 120mm fans. Otherwise, the Noctua A12x25 or their knockoff, the Thermaltake Toughfan, are also top performers.
@@thedinotamergaming not going to spend that kinda money.
They should just put sockets and adapters around the ENTIRE fan housing. Giving you endless combinations of points of contact and you can make covers that slide on and off to give it a nice clean look
they could probably even make the covers be RGB as well
Exactly, that way you dodge the ENTIRE problem of "can't clear the fittings", because you don't NEED to clear the fittings if the wire and the fittings don't have to coexist in the same spot. Plus, being able to feed the power/RGB wire into (one of the) the MIDDLE fan(s) of say a 360mm or 480mm radiator would mean that you could have a lot easier of a time hiding the wires, and hey maybe you don't need that fan or RGB extension cable anymore....
Additionally, they could make ALL those sides have the socket for the cable, but if you want to slot fans together you would put a little piece of molded plastic with strips of copper embedded in it that would convert that into the "pogo pin edge connector" type thing instead. That way ONE thing does BOTH things, rather than needing 2 different styles of connector to do it.
Only thing that wouldn't be possible is having a "push" fan right next to a "pull" fan, because then the RGB would be sent to the PWM and vice versa, and that doesn't sound like a good idea (but you can have the slots that the fans attach together with use something like a D-shaped slot opening so that can't happen).
Great detail. Thanks for all the build faults and benefits theses come with 👍🏼👍🏼
Great video... I love that level of granular detail. More detail like that please
With my current setup, I'm unable to use these, but I'm still hyped for everybody else that can use these. Very cool product to me. I used the v1s for my buddy's pc and liked them, so these definitely seem like a nice upgrade
I actually ended up splicing one of my wire connectors for my SL120s because I had 2 fans on the top of my case and 1 fan in the back and the lighting would not "chase" correctly. So, I took one of the wires I wasn't using and hacked together a bridge between the top fans and the back fan. Now the software reads them all as a single set of 3.
Thanks for the review Jay, I'll stick with my V1's for now
Thank you so much, i was just about to buy these for a build, and have to overthink the build now. Thx guys !
Bring it on! These will go great in my Y60 case
Love my. Uni fan v1 might be adding some of the infinity ones to my build
iFixit is literally the only add I'll sit through and watch because it's awesome.
@JayzTwoCents , 2.54mm Dupont jumper cables will sort out both the length & proprietary cable problem. I have to do exactly that to extend some of the Corsair RGB cables at the moment until I get a kit to make my own cables to try and tame spaghetti junction in the back of my Corsair 7000X case with 17 QL120/40 fans!
EDIT:- Just a quick note for anyone wanting the 'proprietary' connectors, all you need to search for are the following - Molex, SL Female Connector Housing, 2.54mm Pitch, 4 way, 1 row & Molex, SL Male Connector Housing, 2.54mm Pitch, 4 way 1 row (you can get 3 way, 1 row to, just change the search term). They can be picked up in packs of 10 for around £5 or so from RS electronics or as already mentioned you can use the plain, non locking version using Dupont connectors which you can get as 4 or 3 way, 1 row type too.
This needs to be upvoted more as it's not a proprietary cable connector, it's just a locking Dupont 2.54 cable. You don't even need the locking mechanism it is just there to make sure the cable doesn't pull out easily.
Totally worth the cost imo, they're quiet, keeps things cool as they should and are the best looking fans I have ever seen. The cable/daisy chainable feature alone makes them worth the price for admission. I have 7 of the UNI SL120 Infinity's in white, which replaced some Deepcool fans I had gotten, they were available at time of purchase and the UNI's were not. Compromise...so when I had the funds and they were in 3 months ago and snatched them up.
I do agree on the cable lengths as well. My rear exhaust is right there at the end, giving just enough to plug it in and remain in the cable channel on the back. If you were to see the back panel, you'd see a crooked control box 😁
I swapped out the Corsair ML fans for these and I’m happy I did. No more wire clutter and I didn’t have any problems connecting 9 fans inside the O11 Dynamic EVO Mid Tower.
They are super good looking fans and great for the right application. Right now I'm loving my NF-A14 Industrials on thick AlphaCool 280MM rads.
I think the interconnecting design is genius! One issue with my build is 6 fans = loads of wires to manage and, while the case has a rear cable management compartment, it’s very shallow so things get a bit…interesting. Being able to run 3 - 4 fans off one cable with no voltage drop off would be very handy indeed.
Yup, those RGB stuffs really making calbe managment complicated now. Even worse, it pushes all of us to "unify" all our RGBs behind a single manufacturer to make all those RGB stuffs "work together".
Just bought 5 x 3packs inf uni fans. Works like a charm! Considering switching them for this v2’s.
Your i fix it commercial is hilarious! I love it. It just needs a bit more guitars in it.
I have the Lian Li ST120, and they're great. So yes, i agree with Jay. They make great fans, albeit expensive.
my son and his friend just built me an o11 dynamic evo water cooled rig with these fans love them
That hit marker on Jay's face was pretty funny. 🤣
I have the V1s on a radiator and I had the exact scenario Jay described. I had to flip the connector to the other end and then the cables would barely reach to where I needed them to go. I am redoing my build in the new year and will most likely swap to the AL Inf fans because I prefer the lighting on them.
This is why you’re the best, you pointed out exactly the issue I have with those cables 😂
I honestly really like the new form of the controller combined connector, but that's mostly because I think the standard connectors were janky as hell and didn't seem to seat well in the controller's ports without a lot of wrestling that made me worry about causing damage. That said, totally agree the cables should be longer and also that having slots on both sides of the control box was very convenient. Hoping that gets fixed shortly.
What we need to wait before buying now is the longevity of the cables. I hope it is that flexible and durable.
Just finished up a new EVO build with x10 Infinity fans and an RTX4090 Strix in the Upright position...it had ZERO clearance and I'm shocked it even worked out as good as it did 😋
Being able to connect up to 4 fans and have only ONE cable is insanity!
I love this fan design, having a modular quick connect fan, to eliminate excess cables, I'm all for.
Until you need an extension cable...
@@ErrorInvalidName Extensions are available.
The iFixit sponsor portion is always the best!
Just finished building a new machine with the V1 fans and they’re pretty slick. O11 mini, Galahad AIO Unifan edition with extra fans on the bottom. Really going to enjoy this thing!!!
Bro i bought lian li sl edition galahad Aio
But I'm seeing alot videos related to its noise
I'm literally worried,
How your aio's working
@@idk-69247 it’s actually pretty quiet. Running it on a Ryzen 7600x which is only 105w. I bought 3 more SL fans for the bottom of the case and at full speed at 5 feet distance, the 6 fans are noticeable, but not obtrusive. The L-Connect 3 software lets you set fan curves any way you want.
One plus with this AIO for me is the port for topping up coolant lost to sublimation through the hoses. May never have to do it, but nice to have the option.
If you can get a store to let you hear them before you buy them, that would help you a lot. Never hurts to ask for a demonstration. Worst they can say is no.
I have 13 of the Unifan's V1 installed .. Both 120 & 140 .. if it wasn't for the daisy chain there would have been no way to hook them all up ... I would have had to use two commander pros .. So saved me a lot of wiring and head ache .. will buy more as I do more builds worth the price every time ..
IDC about this video BUT this was byfar the BEST promo I've seen on TH-cam.
Something I've never seen ANYONE mention about UniFans is the chunky frame around the fan. It means the blades are shorter than most 120mm fans. It actually reduces overall airflow compared to other 120mm fans. Remember 120mm fan means the frame is 120mm, not the fan blades.
These are awesome aesthetically, but IMO leave a bit to be desired in terms of airflow and static pressure at a given dB measure. If you want looks, Lian Li has the best fans on the market. Period. But it's a bit annoying to see countless reviews of these fans pretend that they actually perform really well, overlooking that they're pretty average despite the immense price. Not a big deal for most people, but it should be noted for anyone who wants high-end performance.
Take a look at Noctua fans, Corsair ML120, or Phanteks T30 fans for example. Look at all those fans straight on towards the fan hub, and look at how much area the chunky frame on the UniFan takes up in comparison. These UniFan fan blades are shorter as a result. There's less room for airflow. On a radiator, there's now going to be 2-3mm on each side of the radiator where the fins get no direct airflow. Not a huge difference, but it leaves cooling performance on the table.
Comparing stats, Noctua NF-F12 vs these UniFan SL120 V2: at 2000rpm, same noise (29.7dB vs 29.2dB), but Noctua moves more air (71.6 CFM vs 64.5 CFM) and Noctua has much higher static pressure (3.94 mmH20 vs 2.59 mmH20), all at a standard 25mm thickness vs the 28mm of the Lian Li fan.
Or look at the Phanteks T30, which also uses extra width (30mm) to increase static pressure, and it also outperforms in airflow (67CFM), static pressure (3.3 mmH20), and noise (27dB).
I have noticed that to, have not heard anyone mention the reduced blade-diameter. Gamers Nexus has a fan tester, so hopefully he’ll test these fans.
The thing is that Lian Li fans just look better and have the click system wich gives u just 2 cables (one if u bind them together). for 4 fans in a row. And now also with that extra cable for the rear casefan if u have a 360 rad in the top...Just the best invention ever. Ih have them in both my PCs. 👌👍👍👍
I bought the 3 pack of the AL120s. They're expensive, but I love how they look in my case, which makes it worth it when I'm looking at them every day,
They are beautiful fans I'll give them that. Last year I literally had to stop a build for a week because one of my fan cables was an inch short. Course I take blame I should have done a dry run my measure first.
They are crazy expensive but also crazy good!
Would love to see Lian Li do a front cover for this fan with the look of the side panel (including rgb)!!! They have the o11family , where you can peek in front, it would be nice if the fan looked as good from the front as from the side.
I've already got ifixit but that advert makes me want to buy more
I have the AL120s and have no issues using two control boxes. I do use two because I have four rows of three plus an exhaust but the AL120s do not have the cable to connect another fan the same channel. That means technically five sets of fans. What I really don't like about the L-Connect software is that I get prompted on startup twice to allow UAC. I use SignalRGB Pro to control the fans which does not pop up the UAC window. Another drawback is that the fans on the control boxes are not visible by the Fancontrol software, which is not their fault. I can hook up each set of fans to the motherboard which then Fancontrol can control. SignalRGB cannot see fans on the motherboard (ASUS Dark Hero)
I am going to be buying my son a desktop PC for his birthday and will be building it with him. I am squarely in the camp of these v2 fans. The price really doesn’t matter as any of the major brands 3 packs are all over $100 USD. The ability to daisy chain 3 of them on 1 wire is fantastic.
I like how on the infinity fans, you can use the 3/4 pin cables from a single fan unit on up to a 4 or 5 fan block
I have the V1s and came into the exact issue with rads forcing an airflow direction and orientation i didn't particularly want to go with originally to avoid that clearance issue. They're super clean and nice to use except that issue. These V2s do look to be an improvement. Perhaps i'll switch as i need to do a full loop drain and clean soon anyway. Something i've avoided as i realised i didn't install my drain valve until after filling my loop....yay.....
Great video. Love your stuff. Any chance you guys might do a video on cable mods again, specifically right-angle options for MB cables and video cards?
How Jay slapped himself with a lian-li câble...thats the true Hardware love 😅
I own a total of 8 sets of SL120 Unifans, the white RGB turned yellow about year into owning the fans. I got them a little after they were announce released, when they were difficult to get.
I'm glad the only issue I had with v1 was some yellowing, which they quickly remedied by replacing all of my fans. I still have plenty of cable length and great looking LEDs.
These fans are such a game changer in cable management, they should be the new standard.
Such cool fans. I'll wait till they get it right. Thanks jayz2cents
you could extend the proprietary cable by splicing the cable and lengthening it but that does require soldering..
i love the new cable system so it fits on radiators better, but ive always managed to get it still in between the aio fittings. yes it was tight at a little pressure on it, but it works. might upgrade on these, for the airflow upgrade wich i could need uite well since i got a project goin on with an diy pc case
Still the best fans overall. Good cfm ratings on both 120 and 140 versions, reduced cable clutter, relatively low noise, and I prefer the side lighting rather than the front.
never have I loved a sponsor before this video
Love the look of the fans. Cable length a probelm
I havent looked at any other fans since I bought BeQuiet Silent wings 3 a few years ago. My priority was always silence, since temps are never a concern for my build. I must admit, Lian Li always are ontop for RGB lights designs
man i love Lian Li customer service. found out that my SL120 fans were part of the defective LED batch, they replaced the entire 9 fans without requiring me to return the defects. basically, keeping it for backup, or another build.
I'm still using the v1 fans with a lancool mesh 2,and thankfully everything all just worked out with the fan and rgb connectors
I like the lighting the most
I always start with the back fan to top fan to control box, then bottom fan to front fan to control box. Solves most cable length issues..
Yeah no doubt, if you make proprietary cable it has to be either longer or easily extended by offering cheap extensions.
i had 9x v1, and now i have 9x v2. nice improvement in terms of performance, i love the looks.
in both rigs, i found myself more comfortable using an "ordinary" argb/pwm splitter, avoiding their controller.
worked like a charm, controlling argb with motherboard software and speed with FanControl.
cable management was a joy both times.
only complaint: after 2 years of usage of v1, leds degraded unevenly, and the colors were not uniform and precise anymore.
hope v2 are better in this aspect.
anyway, STRONGLY RECOMENDED.
Hey Francesco, great comment post for Jayz review on the new v2 fans. The different options in cabling can be confusing to first time builders or even long time builders myself as I dont alway have access to new products. I was intrigued by your work-around by using a splitter and avoiding the fan controller completely. I was hoping you could explain how I might be able to use 9x of the new fans without the controller? I assume I'd have 3x PWM fan cables and 3 RGB cables that would plug into the motherboard? Thanks for reading.
I have 7 of those SL120's and found it annoying how the connector gets in the way of the typical radiator fittings. And with how short the wires are to begin with. It made it a challenge on where to locate the fan controller in the case so that all the wires can reach it. I wasn't even aware that you can get JST extensions until well after I put my system together. But it's nice to see that Lian Li is still trying to improve on the design. I do like the idea with the extension cable to bridge between the top fans and a rear case fan.
My build has the infinity morror fans and while expensive, they look amazing and honestly if you can arrord it... It's worth it.
12:54 Actually on your left hand it looks like a standard 1x7 2.54mm crimp Pin Header with lock. The casing with a lock is hard to find but the ones without a lock are abundant on the internet.
The one on your right hand idk what it is. Its most likely not proprietary since it would add a unnecessary cost. Its much more likely that they are using something that already existed. All you need is to someone to identify what conector it is and you can make your own custom cables without needing to splice the wires.
I run 3 uni fans and 3 non uni fans they work.. they work well and given that some of the other brands i've had, have had bearings start to die within 6 months of purchase *eyes Mirage* that extra price is worth it for good fans that don't break.