Always try holding down its tongue with your finger while heavily shaking it up and down for 10 seconds, you can most likely avoid the trouble of taking it apart, worked for me and many others.
wonderful tutorial! i just got a new guy on ebay, he's a 1998 factory sealed one so he hasn't been used in 20 years. just had to pry him open & spin the motor. thank you so much!
This was so helpful! My son loves Furbys ever since I showed him them. I got him a 1998 Furby and it didn't work at first. I ran across your video and it's up and running great! Thank you!!!
Thank you so much!!!! I bought a brand new 1998 furby in original box today and I was sad that he didn’t work. The peeling process took about 1 hour but he started talking after 5 or so gear spins, didn’t even need to touch the motor or go for 10 minutes or anything like that.
Disassemble tips were right on the mark. Thank You for that. Our Furby was working but not correctly. It would power on, say Bueno, snore and go to sleep. Flipping it upside down would wake it but again, Bueno, snore, sleep. Once we had the disassembly done we inspected everything we could see and found no broken parts or loose wires etc. We got it working correctly, sort of. We found that when it was first turned upside down to wake, as it is just starting to wake quickly feed it. The timing of flip and feed is tricky but it does work. If you have a Bueno Snore Sleep Furby maybe it will work for you.
That sounds like MSA (Me Sleep Again), a somewhat common glitch with 1998 furbies where they immediately went back to sleep after being woken. Some have more severe cases than others, and are able to wake after a few tries. Anyways, if you just hold its tongue and flip it upside down, it has the same effect as the solution you described.
Thanks for this. I had two Furby's that wouldn't start up, and the first website showing how to fix involved sewing and all kinds of things. Yours was better, and then I realized I could get to the motor via a small screwdriver going in above the beak with no disassembly required. Both are now working fine.
Thank you so much! My furby had the same problem and we spent an hour fixing it. Your video was the only one that shows me how to do it. It's eyes still won't move though.
I tried what you said, I didn't even have to remove the skin completely. I don't know what happened but I jammed a small screwdriver in there where the skin is to try and remove it and all of the sudden he just started working and he's been working ever since!!! Thank you so much! My furby was sleeping for 15 years!!
Did u have ur finger In It's mouth? Apparently pushing its tongue down and flipping the furby upside down or shaking the furby for 10-30 seconds revives the furby lmao...u have to be pushing its tongue down the entire time tho
I like this video a lot. I just bought a black Furby with grey eyes off of eBay for my roommate, that was used, but in good condition and was supposed to work fine. The seller even gave me new batteries for him and said he worked. My roommate just opened him today and we tried him out. He opened and shut his eyes repeatedly and then stopped. And then he spoke fine, moving and then stopped again. All we can do is get him to say something and freeze in the middle of his movement, but that's it. :(
They never work when you get the old ones. :( Pray I can fix mine. I loved this toy as a child. Xmas Eve present. Didn't work. Woke up xmas morning to this voice. 😍
You made this video. My sis googled how to fix a 1999/1998 furby. Watched this. Fixed my tie dye furby that had been recently bought off of eBay new in box. Same thing happened with a 2nd furby. Fixed that. Thank you so much! X3
Just used this guide to wake a 1999 Furby Baby from its deeeeep slumber. There’s an additional screw at the very tip top of the back of the Baby’s head that isn’t in this video but otherwise this was everything I needed. Thanks!
Ok thanks for the video . My Furby has been in the closet for years like 30. I knew it had an issue. I put batteries in and it didn't work. I watched your video was able to take off the fur. Then I realized it take 4 batteries. there's two batteries in the cover. Then remembered what the problem was. it was the little tab connector from one set of batteries to the other. So now that the fur is off I will fix that broken little tab to see if she comes alive. And then I'll put the fur back on. Thanks
Do you possibly have another little speaker to test it with? Also do you have any kind of tester to see if the speaker is getting power? That is what I would do first.
It could very well be the speaker. - maybe a wire that came off or just a bad speaker. You would need to get into it to see for sure. That requires surgery....
if anyone needs to know this, you do not need to skin a furby to restart the motor. if you pull down on the top of the beak, it will open up and give you access to the motor.
You checked the connection from the battery to the circuit board? it could just be a wire issue. There is not much more you can do, you have tried the top things that usually fix them. Keep spinning that motor.
I know this isn't related to furby but I have a Little Tikes Talking Pete doll made by playmates released in 2000. I'm trying to fix... His mechanic's are pretty identical to Amazing Amy. I took out the screw's & tried opening his talk box but it'll only open by maybe an inch. To afraid to put more pressure on it for fear of breaking his talk box to get to the circuit board. His talk box is some how fused with the mechanic's in his head. Is there any chance of opening his talk box with out breaking it? Or maybe having it slide out of his vinyl head around the neck area? I'm thinking if I can clean his circuit board I might be able to get him to turn on. I already scrubbed his battery compartment with distilled white vinegar & baking soda mixed with water. I then cleaned it with glass cleaner & again with a eraser but he refuses to power on. His battery compartment now sparkles from being so clean. When he came to my house he had massive blue battery corrosion in his battery compartment from double a batteries. If I'm doing something wrong any advice is appreciated! 👍 Wondering if he's beyond repair at this point... 🤷♀️
Thanks so much i thought I would have to throw out my old furby as it just made horrible noise then wouldnt do or say anything I followed your steps and now my daughter is happy enjoy my old furby from when I was little after a good clean of course
I’ve kept several toys my parents bought me from childhood I have a furby and teddy ruxpin and original cabbage patch doll. They are all kept in good condition. My parents have since passed away so I’m glad I kept them. Maybe I can get my little furby dude to work now.
This worked for me on one of ours that was broken. Some things i noticed though, The bottom of ours has a slit where you can see a plastic strap it is actually a zip tie so I cut it. the face part of mine has a screw on each side then it bends up. The motor thing worked for me! I reassembled the sides and put a new zip tie in the bottom and we have a working Furby. Thanks for the tip!
You don't have to take off the whole fur. I have found a much easier way where you don't have to take the whole Furby apart to reach the motor. My sister bought a Tropical 1999 Furby and when we received it we had figured out that the motor was stuck. We took a flat screwdriver and, you know where the beak is? Just above the beak you can push the flat screwdriver in through and wiggle it around. Since the motor is right above the beak, you just wiggle the screwdriver around which should get the motor spinning after a few wiggles, and boom! the Furby should start talking again :D I have done this so I know it works.
For some reason these Furbys have been turning up in the Lupus Foundation thrift stores stores. In the past month I got two vintage Furby Babies, 2 modern Furby Booms (With LCD eyes) and 3 full sized Hatchimals. They never go for more than 1-5 dollars. I'm obsessed with them.
I would like to thank you for making a video like that I have a lot of 1998 Furbies that work some have sound and some do I have been getting them off of eBay but once again thank you for making the video
The new Furby are more sophisticated and I have not taken one apart. Have you tried the reset button? Also, make sure you have fresh batteries and that you take them out and put them back in.
Onghssss hahaha that is so cool . The new first is much more different of those old ones . I did fix my too if u guys have a new furby I have the video too :). So cuteeee white like that too lol .
Have you tried holding them upside down and pressing on his lower mouth? Also try a reset. Sometimes a little extra tap on a table top might fix them. More then likely from non-use, they need some help getting that motor going. Let us know
That sounds like a more technical issue. I would guess that something with the circuit board went bad. I have another video coming on how to take them apart to look at the interior and see if there is something lose or has issues.
Thank you so much! i just bought a never opened 1998 furby local and when i took it out and put new batteries in it, it didn't work so I'm going to try this!
You can fix a comatose furby without opening it up, all you need to do is keep gently hitting it on the back bottom for a while, sometimes it takes ages but doing this jolts the motor into life. No need to open it. Worked every time for me for at least 30 vintage furbys so far.
I do have a few Furby I need to work on, so in the future I can see if that is possible. We are in a huge video run with other products and it would not be this year :( sorry about that.
My furby jus moves his mouth, eyes, ears and the platform at the bottom but wont stop! Ive got to the motor but its all working he just keeps going but wont stop or talk. HELP
Hi sweet , I just saw u comment u need help with ur furby ? I hope u got it fixed . My furby is new and I have the a fix furby video up . Go and check out . It my help with ur furby :) very easy to fix u can do it .
He must be doing the "reset dance" glitch...it's where a furby tries to reset itself but fails...resulting in rapid eye blinking, mouth opening, ear twitching and the bottome panel moving
That is good to know - if you get a chance fill us in on the details because we are planning on a step-by-step repair guide and if something worked, it would be great to know... :)
they worked! i read somewhere who pressed the lower mouth a lot, makes the machine going or something. so i rocked that thing, pressed hard for 15/20 seconds and both of them slowly started moving and now they're alive! bad thing is.. one of them has a very sensitive hearing sensor, it reacts repeatedly like someone clapped their hands or made loud noise, and then it starts dancing and dancing without stopping. so i'm putting this one for sale.
I have no idea what needed to be fixed in him to be honest, all I knew was that when I put new batteries in him he didn't work at all. I took out the four screws that you showed in the video and looked inside to find no problems at all. When I was getting ready to put his fur back on I saw a screw at the very top of his head between his ears. I loosened it up a little bit and he started working again so I'm guessing it might have been pinching a wire causing him to not work.
Ok, I see, I did not read your question correctly. The battery fix does work many times on the older Furby. If it happens again, just keep giving him fresh batteries and take good care of him....
That would be the 2005 Furby - We have only had the one in our videos and it was working, so I have never taken one apart. This really sounds like a broken gear inside.
We have not found any Furby repair person yet. We have had a lot of people do certain little things without taking it apart and getting them to work. So maybe run the basic tests first. You would need to search some of these comments. We can try and help
Hi! Diane here! I sent you an email. LITHIUM batteries work when other so called energizers don't.... I have all my furbies ready to be sold, all brand new still in boxes, some VERY rare...I have the Angel furby/speaks in "heavenly" furbish...which I have no idea what it sounds like since never opened, had purple eyes too...
I have found it is very hard to get the fur back around base. I found some of three of the next generation furbies also, my favorite are still the vintage/original ones.......where can I post a picture for you?
do you have any tips on how to get the sensors to work? or does that all tie in to the whole loose wire thing...? I recently bought a 1998 furby and the only sensors that seem to work on him is his tongue and when you lift him up
I was really excited to give this to her because she had a Furby just like this one, when she was younger. I opened him up to check it all out, but there's so many wires and stuff, I have NO idea what to do to fix him. lol Any ideas?
Just did the stuff in the video and it resurrected an ancient Furby. Thanks :D
+Angel Anderson Glad it helped.
+Lucky Penny Shop I have a furby that won't work watch my first video to see then ask what should I do
*Awaken my masters*
@@AceofSpades820 is that a jojo’s reference
Always try holding down its tongue with your finger while heavily shaking it up and down for 10 seconds, you can most likely avoid the trouble of taking it apart, worked for me and many others.
Omg it worked!
Guys i can’t stress enough how important this comment is!!!!! Worked for me!!!
It doesn't work for me. My furby just keeps moving when I turn it on with no sound.
This is what's up! Worked
it worked!!!
Love the info here, but it's a little creepy the way you're performing open-case surgery without a general anesthetic!
That's what I was thinking ! lol
Your video helped me fix my very first Furby that hasn't worked in about 10 years. Thank you so much!
oh thank you so much! I bought my Furby at an antique store and it never worked but now it works just fine! Thanks!
Cool, glad you got it working!
I’ll set
You got L
Hello! glad they are all ready to go. We just purchased 6 broken ones and will do some more videos on repair.
I always wanted a furby...
wonderful tutorial! i just got a new guy on ebay, he's a 1998 factory sealed one so he hasn't been used in 20 years. just had to pry him open & spin the motor. thank you so much!
The rim is an 18lbs white zip tie. You can cut them and the skin pulls up much easier. Amazon sells the zip ties, so you can easily replace it.
This was so helpful! My son loves Furbys ever since I showed him them. I got him a 1998 Furby and it didn't work at first. I ran across your video and it's up and running great! Thank you!!!
Glad it helped, another Furby saved!
Thank you so much!!!! I bought a brand new 1998 furby in original box today and I was sad that he didn’t work. The peeling process took about 1 hour but he started talking after 5 or so gear spins, didn’t even need to touch the motor or go for 10 minutes or anything like that.
Disassemble tips were right on the mark. Thank You for that. Our Furby was working but not correctly. It would power on, say Bueno, snore and go to sleep. Flipping it upside down would wake it but again, Bueno, snore, sleep. Once we had the disassembly done we inspected everything we could see and found no broken parts or loose wires etc. We got it working correctly, sort of. We found that when it was first turned upside down to wake, as it is just starting to wake quickly feed it. The timing of flip and feed is tricky but it does work. If you have a Bueno Snore Sleep Furby maybe it will work for you.
That sounds like MSA (Me Sleep Again), a somewhat common glitch with 1998 furbies where they immediately went back to sleep after being woken. Some have more severe cases than others, and are able to wake after a few tries. Anyways, if you just hold its tongue and flip it upside down, it has the same effect as the solution you described.
@buwheal are u saying if u shake it vigorously with finger on tongue when it's in me sleep again mode it could make the furby work again?
He is now well fed and relaxing with his Furby family.... Thanks for stopping by.
Glad it worked out! That is really cool... Thanks for checking in.
I used to watch your videos every weekend at my grandma's when I was a little kid. You're channel is very nostalgic for me :]
Thanks for this. I had two Furby's that wouldn't start up, and the first website showing how to fix involved sewing and all kinds of things. Yours was better, and then I realized I could get to the motor via a small screwdriver going in above the beak with no disassembly required. Both are now working fine.
Thank you so much! My furby had the same problem and we spent an hour fixing it. Your video was the only one that shows me how to do it. It's eyes still won't move though.
That is great! Thanks for checking in... Another Furby saved!
I tried what you said, I didn't even have to remove the skin completely. I don't know what happened but I jammed a small screwdriver in there where the skin is to try and remove it and all of the sudden he just started working and he's been working ever since!!! Thank you so much! My furby was sleeping for 15 years!!
My moms was too! Her's was sleeping for about 15-16 years..
mine for 19 yrs... so funny works great (Gismo)
Did u have ur finger In It's mouth? Apparently pushing its tongue down and flipping the furby upside down or shaking the furby for 10-30 seconds revives the furby lmao...u have to be pushing its tongue down the entire time tho
I like this video a lot. I just bought a black Furby with grey eyes off of eBay for my roommate, that was used, but in good condition and was supposed to work fine. The seller even gave me new batteries for him and said he worked. My roommate just opened him today and we tried him out. He opened and shut his eyes repeatedly and then stopped. And then he spoke fine, moving and then stopped again. All we can do is get him to say something and freeze in the middle of his movement, but that's it. :(
Sweet! The Furby family is happy they are back!
Thanks! We appreciate the visit...
That is so cool it helped! We like saving the Furby out there!
They never work when you get the old ones. :( Pray I can fix mine. I loved this toy as a child. Xmas Eve present. Didn't work. Woke up xmas morning to this voice. 😍
You made this video. My sis googled how to fix a 1999/1998 furby. Watched this. Fixed my tie dye furby that had been recently bought off of eBay new in box. Same thing happened with a 2nd furby. Fixed that. Thank you so much! X3
Happy little Furby. I'm happy for him.
Just used this guide to wake a 1999 Furby Baby from its deeeeep slumber.
There’s an additional screw at the very tip top of the back of the Baby’s head that isn’t in this video but otherwise this was everything I needed. Thanks!
I’m glad it helped!
Ok thanks for the video . My Furby has been in the closet for years like 30. I knew it had an issue. I put batteries in and it didn't work. I watched your video was able to take off the fur. Then I realized it take 4 batteries. there's two batteries in the cover. Then remembered what the problem was. it was the little tab connector from one set of batteries to the other. So now that the fur is off I will fix that broken little tab to see if she comes alive. And then I'll put the fur back on. Thanks
Do you possibly have another little speaker to test it with? Also do you have any kind of tester to see if the speaker is getting power? That is what I would do first.
It could very well be the speaker. - maybe a wire that came off or just a bad speaker. You would need to get into it to see for sure. That requires surgery....
▶▶ Watch More Furby Toy Videos ▶▶ Furby Furblings & Furby Boom Phone App, Hasbro
Life
LuckyPennyShop.com
Lucky Penny Shop I love you
if anyone needs to know this, you do not need to skin a furby to restart the motor. if you pull down on the top of the beak, it will open up and give you access to the motor.
You checked the connection from the battery to the circuit board? it could just be a wire issue. There is not much more you can do, you have tried the top things that usually fix them. Keep spinning that motor.
I know this isn't related to furby but I have a Little Tikes Talking Pete doll made by playmates released in 2000. I'm trying to fix... His mechanic's are pretty identical to Amazing Amy. I took out the screw's & tried opening his talk box but it'll only open by maybe an inch. To afraid to put more pressure on it for fear of breaking his talk box to get to the circuit board. His talk box is some how fused with the mechanic's in his head. Is there any chance of opening his talk box with out breaking it? Or maybe having it slide out of his vinyl head around the neck area? I'm thinking if I can clean his circuit board I might be able to get him to turn on. I already scrubbed his battery compartment with distilled white vinegar & baking soda mixed with water. I then cleaned it with glass cleaner & again with a eraser but he refuses to power on. His battery compartment now sparkles from being so clean. When he came to my house he had massive blue battery corrosion in his battery compartment from double a batteries. If I'm doing something wrong any advice is appreciated! 👍 Wondering if he's beyond repair at this point... 🤷♀️
Thanks so much i thought I would have to throw out my old furby as it just made horrible noise then wouldnt do or say anything I followed your steps and now my daughter is happy enjoy my old furby from when I was little after a good clean of course
Glad I could help!
Thank you for your video. I was able to repair my son's Christmas present
You saved me from a very disappointed little girl thanks to your video I managed to actually revive one
It is a delicate operation.....
I’ve kept several toys my parents bought me from childhood I have a furby and teddy ruxpin and original cabbage patch doll.
They are all kept in good condition. My parents have since passed away so I’m glad I kept them. Maybe I can get my little furby dude to work now.
so sorry for your loss, I know how it feels 😔
This worked for me on one of ours that was broken. Some things i noticed though, The bottom of ours has a slit where you can see a plastic strap it is actually a zip tie so I cut it. the face part of mine has a screw on each side then it bends up. The motor thing worked for me! I reassembled the sides and put a new zip tie in the bottom and we have a working Furby. Thanks for the tip!
Cool, thanks for updating us!
You don't have to take off the whole fur. I have found a much easier way where you don't have to take the whole Furby apart to reach the motor. My sister bought a Tropical 1999 Furby and when we received it we had figured out that the motor was stuck. We took a flat screwdriver and, you know where the beak is? Just above the beak you can push the flat screwdriver in through and wiggle it around. Since the motor is right above the beak, you just wiggle the screwdriver around which should get the motor spinning after a few wiggles, and boom! the Furby should start talking again :D I have done this so I know it works.
Avery_ _Kat | does that mean for the speaker or the furby movements?
For some reason these Furbys have been turning up in the Lupus Foundation thrift stores stores. In the past month I got two vintage Furby Babies, 2 modern Furby Booms (With LCD eyes) and 3 full sized Hatchimals. They never go for more than 1-5 dollars. I'm obsessed with them.
They are nice to find. Not many have shown up around here.
I would like to thank you for making a video like that I have a lot of 1998 Furbies that work some have sound and some do I have been getting them off of eBay but once again thank you for making the video
Did you double check those batteries - also there is a reset on the bottom of these. Have you tried resetting?
They are all pretty cool... Do you want a new mint one, because Shop Goodwill is showing more and more used ones on their web site.
The new Furby are more sophisticated and I have not taken one apart. Have you tried the reset button? Also, make sure you have fresh batteries and that you take them out and put them back in.
saw your web site and dude you saved my life cause I buy it on eBay for 19.99 done everything you teach us and he work like a brad furby
Cool, glad it helped.
+LuckyPennyShop.com I got one a few months ago
Onghssss hahaha that is so cool . The new first is much more different of those old ones .
I did fix my too if u guys have a new furby I have the video too :).
So cuteeee white like that too lol .
Have you tried holding them upside down and pressing on his lower mouth? Also try a reset. Sometimes a little extra tap on a table top might fix them. More then likely from non-use, they need some help getting that motor going. Let us know
That sounds like a more technical issue. I would guess that something with the circuit board went bad. I have another video coming on how to take them apart to look at the interior and see if there is something lose or has issues.
Just used this to fix a 1998 Furby for my little girl! Thanks for posting.
Very cool! Glad it worked.
Frederic Doss is that an army furby cause instead it has no beak and it has eye brow's and it has cat ears very weird.
Thanks - every little tid bit helps!
Thank you so much! i just bought a never opened 1998 furby local and when i took it out and put new batteries in it, it didn't work so I'm going to try this!
I hope it helps!
You can fix a comatose furby without opening it up, all you need to do is keep gently hitting it on the back bottom for a while, sometimes it takes ages but doing this jolts the motor into life. No need to open it. Worked every time for me for at least 30 vintage furbys so far.
Hahaha wowwww . My hubby like to fix things like that too . Hitting until fix it .
THANKS SO SO SO VERY MUCH!!!!! This worked perfectly...I am so happy and thanksful...you rock!!!!!
Thanks for this video. I was able to get ours working again by just spinning the motor manually :)
I do have a few Furby I need to work on, so in the future I can see if that is possible. We are in a huge video run with other products and it would not be this year :( sorry about that.
It does take some stretching. I start on one spot, hold there and slowly go around. Extra hands would make it easier.
That is really big hair on the black furby
My furby jus moves his mouth, eyes, ears and the platform at the bottom but wont stop! Ive got to the motor but its all working he just keeps going but wont stop or talk. HELP
Hi sweet , I just saw u comment u need help with ur furby ?
I hope u got it fixed .
My furby is new and I have the a fix furby video up . Go and check out . It my help with ur furby :) very easy to fix u can do it .
Exact same problem I'm having!!!!
He must be doing the "reset dance" glitch...it's where a furby tries to reset itself but fails...resulting in rapid eye blinking, mouth opening, ear twitching and the bottome panel moving
No, this video shows you how to take it off so you can fix them. We have other repair videos.
We are hoping to do more.
I am glade you made this video! I just bought a 1998 furby brand new unopened and it wouldn’t work. I had to do this then it worked.
Who else was shouting at their computer/phone/tablet saying "JUST FEED THE FURBY ALREADY!"?
Kah ay-tay = Me hungry
Kah dah ay-tay = Me big hungry
Doo-moh = Please food.
I'm not too sure about the last one.
+FurbyIsWayTooCute Hahhahaha u are so cool and so funny . Hahhaha thank u .
I fixed my furby too if u want to check out how fix new furby :)
Karla Butterfly Thank you, and I'll check it out. :3
yes the furby must be fed 15 to 20 times so it will stop saying aah
me
That is good to know - if you get a chance fill us in on the details because we are planning on a step-by-step repair guide and if something worked, it would be great to know... :)
Trust me it's best to leave that nightmare asleep
We do not know a specific repair person. There are a few Furby groups out there, that let you adopt a Furby, maybe see if they can help.
That is awesome! thanks for the info also about the beak entry! That is great to know.
I have had that happen to me also! It is frustrating, I hope you find the piece!
It could be... I have not used this Furby in awhile to see how she is doing.
thx soo much for making this video! one of my sisters furbys died and this was the solution foor fixing it! keep making videos LPS!1
they worked!
i read somewhere who pressed the lower mouth a lot, makes the machine going or something. so i rocked that thing, pressed hard for 15/20 seconds and both of them slowly started moving and now they're alive!
bad thing is.. one of them has a very sensitive hearing sensor, it reacts repeatedly like someone clapped their hands or made loud noise, and then it starts dancing and dancing without stopping. so i'm putting this one for sale.
That is good to hear. What did you need to fix/adjust on yours to get it working?
It could very will the wire to the speaker is off, hard to tell without taking him apart.
I have no idea what needed to be fixed in him to be honest, all I knew was that when I put new batteries in him he didn't work at all. I took out the four screws that you showed in the video and looked inside to find no problems at all. When I was getting ready to put his fur back on I saw a screw at the very top of his head between his ears. I loosened it up a little bit and he started working again so I'm guessing it might have been pinching a wire causing him to not work.
Ok, I see, I did not read your question correctly. The battery fix does work many times on the older Furby. If it happens again, just keep giving him fresh batteries and take good care of him....
Yes, that will help get it back in place.
Those are not the batteries.. What did you need help with.
What exactly?
That is cool you have a similar Furby - no teenagers yet:
Mine works except...... no sound! No light between his eyes. I’ve got him open. What should I do for sound?
Correct - Taking out the battery is the only way!
That would be the 2005 Furby - We have only had the one in our videos and it was working, so I have never taken one apart. This really sounds like a broken gear inside.
No problem and thanks...
It could be a bad speaker or wire issue...
We have not found any Furby repair person yet. We have had a lot of people do certain little things without taking it apart and getting them to work. So maybe run the basic tests first. You would need to search some of these comments. We can try and help
He really loved getting his Fur back lol😂
I don't have an instruction manual handy - they are in storage at the moment- maybe someone can help. let's see if someone else answers.
There is a lubrication spot for the gear. Maybe that will help. Also moving the ears and helping it get the kinked worked out might rescue her.
Did you comment on that video? Let me know
She is very shy now after this video :)
You don’t have to be the only one to comment anymore 😔
Hi! Diane here! I sent you an email. LITHIUM batteries work when other so called energizers don't.... I have all my furbies ready to be sold, all brand new still in boxes, some VERY rare...I have the Angel furby/speaks in "heavenly" furbish...which I have no idea what it sounds like since never opened, had purple eyes too...
It could be batteries, a wire etc... It takes time to see if there is something that is fixable.
I have found it is very hard to get the fur back around base. I found some of three of the next generation furbies also, my favorite are still the vintage/original ones.......where can I post a picture for you?
Can you show exactly where the motor part is that you use the screwdriver on, and exactly what to do with screwdriver in/on the motor please? Thx!
It looked like a penguin in the beginning!🐧
I have a furby baby that hasn’t been starting up so this is helpful
Hope it helps!
do you have any tips on how to get the sensors to work? or does that all tie in to the whole loose wire thing...? I recently bought a 1998 furby and the only sensors that seem to work on him is his tongue and when you lift him up
I was really excited to give this to her because she had a Furby just like this one, when she was younger. I opened him up to check it all out, but there's so many wires and stuff, I have NO idea what to do to fix him. lol Any ideas?
Thanks! Two more to fix and they will all be working.
How do you feel the current running through the motor? What part would I touch? And how long did the spinning take?
Can you do a video on how to fix the speaker or show what could be wrong with the sound?