I apologize for the background noises. My house is along the road and its raining from time to time while filming. Please leave a like and subscribe if you find this video helpful. Thank you!
I haven't tried it on stone. But I will make a video of it so please subscribe and turn on the notification bell so you'll be notified for any upcoming videos 😊😊
Hi. Sorry for the late response. Only fiber lasers can engrave on bare metal. DAJA DJ6 is not sa fiber laser but it can engrave on painted metal. Basically it only removes the paint, revealing the metal underneath. I will make a video, engraving test on painted and bare metal. Please turn on the notification bell because i will be uploading it soon. Thank you!
Me alegro que te haya gustado. por favor deja un me gusta y suscríbete si este video te ayudó. En cuanto a tu pregunta, no creo que se pueda grabar en plata .925. Sólo se puede grabar sobre metal pintado. Solo quita la pintura, dejando al descubierto el metal que hay debajo.
I'm glad that you liked it. please leave a like and subscribe if this video helped you. As for your question, I don't think it can engrave on a .925 silver. It can only engrave on a painted metal. It only removes the paint, revealing the metal underneath.
Do you mean "back"? I just click stop. But in case you mean like engrave 2 times in same spot, there is an option that lets you decided how many passes the engraver would do.
I haven't tried acrylic sheets but I think it is possible. If I were to do acrylic, I would just treat it like a glass because if it can leave a mark on a glass, I think it would easily engrave an acrylic sheet. Just make sure you use colored paper. The darker, the better.
I bought mine on an online shopping platform. I have the link on the description. I don't recommend using a vinyl because it is too thick. But you can try it on a scrap material and adjust the settings that may work for you.
Buenos dias. Seguí los pasos, pero no me marcó absolutamente nada en el vidrio, no se grabó ni una linea. No sé qué falló. Tal vez faltó el tiempo en alguno de los procesos?. Por favor, ayúdeme
If you set the focus right and you have placed the laser marking paper, you can try adjusting the settings. Start with using the maximum power followed by reducing the speed.
Hi Sir! Did they use the exact machine? Because Daja DJ6 need a black film to block the light so it can engrave. Some engravers does not need a black film to engrave, like fiber laser.
Hi. I just found out that the black part of the engraving can be removed by plucking it with sharp object. Please watch my other video using the Wainlux K10. I had the result you wanted. It is semi-transparent or more likely, forsted.
Without it, the laser beam would simply pass through the glass, making engraving impossible. The purpose of the black-colored paper, often referred to as laser marking paper, is to absorb the laser light. This allows the laser to effectively engrave the surface beneath it. Laser marking paper is designed to create a high-contrast mark on various materials, including glass, metal, and plastic. When the laser interacts with the paper, it generates heat that etches or engraves the underlying surface. This paper is particularly useful for creating detailed designs and logos, ensuring precision and clarity in the final result. Additionally, it can help protect the surface from potential damage during the engraving process.
I don have an available stethoscope right now but I do have newly uploaded video on Wainlux K10 on Bare metal. You can check that out. Please do like, subscribe and share if you find it helpful! Thank you.
Yes. 1. The laser focus may not be properly configured. Adjust it to the smallest point while the material is underneath. Use the black paper for more accurate adjustment. 2. The "power" and "speed" setting is not good. I recommend 100% power and 50 to 80% speed.
Hi. Good day. You can search for "Colored paper for engraving" on your online shop. I don't exactly know why, but they call it colored paper. I also struggled looking for this product because i don't know what it is but i bet you can find it by using those key words. I hope you have a great day! Cheers!
Hi. It is called "colored paper". I don't know why, but it is the name. I have the link in the description. Or you may try searching it on your online shopping platform. Just use the "colored paper" keyword.
They call it "Colored Paper". But if you want to search for it, try the keywords "colored paper for engraving". I placed a link in the description in case you are in the same country as me. Please like and subscribe if it helped you. Thank you!!!
You can remove the paper residue but the etching/engraving will remain. You can check my other video about engraving on glass using a different engraver.
No, not really. I do understand why it did not engraved properly. It is my fault because I made the design too big for the curvature of the glass. If your glass is bigger, you can try engraving bigger designs.
Hi. Sorry for the late response. Only fiber lasers can engrave on bare metal. DAJA DJ6 is not sa fiber laser but it can engrave on painted metal. Basically it only removes the paint, revealing the metal underneath. I will make a video, engraving test on painted and bare metal. Please turn on the notification bell because i will be uploading it soon. Thank you!
Great vid po! Ask ko lang po if yung provided program ba ni DAJA gamit niyo for PC and wala naman po bang problems sa pag-install? Planning to get the same unit hehe 😅 Salamat po in advance!
Thank you! :) Yes Sir. Included na po yung flash drive with drivers for windows and mac. In case po na wala sa unit mo, pwede mo po ako imessage para mae-mail ko po sayo. Working din po siya sa windows 11 in case na yun po yung gamit mo.
And I want to add po before you buy, di po kaya ni DAJA DJ6 mag engrave sa bare metal, only on painted metal lang Sir. But still napakaganda niya pa rin na engraver. 😊
@@نور-ن1ع4ثthe black material in the video is called "colored paper". I don't know why but if you want to buy it online, that's the keyword you should use 😊
@@Athatdog Di ko pa po natry pero sa tingin ko pwede naman, basta taasan yung power at babaan yung speed para maengrave ng maayos. Makapal na kasi yung vinyl compared sa colored paper at marker.
@@satriaane2113 Yes. Some people use 100 grit but they only sand the engraved part to avoid scratches on the whole design. And some people uses wire brush to remove the black color left by the colored paper.
They call it "Colored paper". I don't know why, but that is the actual name Sir. Lo llaman "papel de colores". No sé por qué, pero ese es el nombre real, Señor.
I guess you got the wrong idea, sir. As you can see in the video, I did not have any problems with the first engraving. The color paper is not the problem; it is the scale of the design plus the curved surface. Yeah, I know I should know better not to make the design bigger. I haven't tried CerMark spray because it's not available in my country. I hope I can try it someday.
Its the scratching with a Stanley knife. Surely its not good at all for a glass. But I do understand we can only use what we have to hand. And well if it works for you that's fine. :) it's just not for everyone :))
@@ajabujabuu must get a small motor and slowly rotate the glass on two rollers you can 3d print a machine that does that and use an existing spinning object like ur usb turn table
My unit did not come with free safety glass so I don't really look directly at the laser. But when I have to check the engraving, I always use the green panel that has the same material as the safety glass. I don't know its name 😅
Hi. Yes it can. Just make sure that the surface of the material is dark enough to receive the laser. White/light or shiny surfaces is a big NO when using this kind of engraver.
I apologize for the background noises. My house is along the road and its raining from time to time while filming. Please leave a like and subscribe if you find this video helpful. Thank you!
The work is excellent, thank you for sharing .
Thank you! Cheers!
Thank you for your good work
Can i use this engraver on stone please?
I haven't tried it on stone. But I will make a video of it so please subscribe and turn on the notification bell so you'll be notified for any upcoming videos 😊😊
I recommend a sand bag (filled with small beans) to position your glass. Just don't fill it too tight. Thanks for the video.
Yeah, I think that is more effective. Thank you for the recommendation Sir! I will try that the next time I engrave on glass.
Well explained
Thank you!
Hey thanks so much for doing this!! I tried black acrylic paint but it didn't work.. your way did!
Hey! My pleasure. Glad I could help. I would greatly appreciate if you leave a like and a subscribe for my channel. Thank you and happy engraving!
have you tried engraving on metal? the non painted one?. thanks
a very relevant question. author please answer
Hi. Sorry for the late response. Only fiber lasers can engrave on bare metal. DAJA DJ6 is not sa fiber laser but it can engrave on painted metal. Basically it only removes the paint, revealing the metal underneath. I will make a video, engraving test on painted and bare metal. Please turn on the notification bell because i will be uploading it soon. Thank you!
@@ajabujabu thank you sir
Muy ilustrativo el vídeo gracias por los detalles....
Mi pregunta es.....
Esta máquina hace grabado en plata .925??
Me alegro que te haya gustado. por favor deja un me gusta y suscríbete si este video te ayudó. En cuanto a tu pregunta, no creo que se pueda grabar en plata .925. Sólo se puede grabar sobre metal pintado. Solo quita la pintura, dejando al descubierto el metal que hay debajo.
I'm glad that you liked it. please leave a like and subscribe if this video helped you. As for your question, I don't think it can engrave on a .925 silver. It can only engrave on a painted metal. It only removes the paint, revealing the metal underneath.
How do you get it to Bark when u hit start?
Do you mean "back"? I just click stop. But in case you mean like engrave 2 times in same spot, there is an option that lets you decided how many passes the engraver would do.
hello, can i use the machine to ingrave on clear acrylic sheets? if yes can you show us how? if no can you recommend a small ingraving machine?
I haven't tried acrylic sheets but I think it is possible. If I were to do acrylic, I would just treat it like a glass because if it can leave a mark on a glass, I think it would easily engrave an acrylic sheet. Just make sure you use colored paper. The darker, the better.
where can i find the color paper for etching glass or what can i use?? vinyl?
I bought mine on an online shopping platform. I have the link on the description. I don't recommend using a vinyl because it is too thick. But you can try it on a scrap material and adjust the settings that may work for you.
thank you
Where did you get the daga green grid mat?
It is included on the package when you buy the Daja Laser.
Buenos dias. Seguí los pasos, pero no me marcó absolutamente nada en el vidrio, no se grabó ni una linea. No sé qué falló. Tal vez faltó el tiempo en alguno de los procesos?. Por favor, ayúdeme
If you set the focus right and you have placed the laser marking paper, you can try adjusting the settings. Start with using the maximum power followed by reducing the speed.
Is possible to the painted metal ?
Yes it is. But the setting will depend on the quality of paint. If the paint is thin, 2 to 3 passes may be enough.
The black material, is that vinyl sticker?
No maam. That is a laser marking paper. I have the link in the description.
Olá, tudo bem? Já vi alguns trabalhos em vidro que a marcação fica transparente. Que material é usado no lugar do vinil?
Hi Sir! Did they use the exact machine? Because Daja DJ6 need a black film to block the light so it can engrave. Some engravers does not need a black film to engrave, like fiber laser.
Conseguiu descobrir? Se souber de alguma que não seja tão cara, me marca aqui.
Hi. I just found out that the black part of the engraving can be removed by plucking it with sharp object. Please watch my other video using the Wainlux K10. I had the result you wanted. It is semi-transparent or more likely, forsted.
But why do you need paper? What if you do that on glass directly? What will happen?
Without it, the laser beam would simply pass through the glass, making engraving impossible. The purpose of the black-colored paper, often referred to as laser marking paper, is to absorb the laser light. This allows the laser to effectively engrave the surface beneath it.
Laser marking paper is designed to create a high-contrast mark on various materials, including glass, metal, and plastic. When the laser interacts with the paper, it generates heat that etches or engraves the underlying surface. This paper is particularly useful for creating detailed designs and logos, ensuring precision and clarity in the final result. Additionally, it can help protect the surface from potential damage during the engraving process.
@@ajabujabu thank you for a quick reply, it is rare nowdays. Subbed.
@@DayBotKnightBot Thanks so much for your support! If you have any thoughts on the video or suggestions for future content, I’d love to hear them!
@@ajabujabu the glass I am working on is black and I want my logo imprinted on it to be white, how do we approach this?
@@eralevant4276 if the surface is already black, there is no need for a laser marking paper.
would you pls teach us how to engrave on stainless steel stethoscopes?
I don have an available stethoscope right now but I do have newly uploaded video on Wainlux K10 on Bare metal. You can check that out. Please do like, subscribe and share if you find it helpful! Thank you.
Hi po, pwede po ba ito sa mga glass tumblers?
Yes po as long as may colored paper po kayo na gamit.
Agradecido pelo trabalho
You are welcome! Please leave subscribe and leave a like if this video helped you. Thank you!
Can you please write the sitting spically the material what I choose?
If you are using the engraver app on your phone, I suggest you don't use the presets. Instead, use the setting I used in the video.
Merhaba .bulasik makinasında yikanabiliyir mu ? Sonra deformasyon olusuyor mu ?
Hi. Yes you can wash it in the dishwasher. The engraving will remain on the glass.
Is using the film necessary for those items with curves?
Yes it is. The film is always necessary when engraving on a transparent material such as glass.
Do you know why i cam scratch it off after it is done?
Yes. 1. The laser focus may not be properly configured. Adjust it to the smallest point while the material is underneath. Use the black paper for more accurate adjustment. 2. The "power" and "speed" setting is not good. I recommend 100% power and 50 to 80% speed.
Would you provide an updated or alternative link for the paper? Could you tell me the name of it?
Hi. Good day. You can search for "Colored paper for engraving" on your online shop. I don't exactly know why, but they call it colored paper. I also struggled looking for this product because i don't know what it is but i bet you can find it by using those key words. I hope you have a great day! Cheers!
Thank you for sharing....
You are welcome! Please leave subscribe and leave a like if this video helped you. Thank you!
Qual é o código da máquina DJ6 para conectar no via Bluetooth?
Hi. It connects via wifi.
How long did it take to make that
@@Lanebushmire I think it took me 15 minutes.
What paper is that. Can you please help
Hi. It is called "colored paper". I don't know why, but it is the name. I have the link in the description. Or you may try searching it on your online shopping platform. Just use the "colored paper" keyword.
Hello is it work for long ??
For that setting and size of design. I think it took me 15 to 25 minutes.
Can you send me the software windows for this engraver
drive.google.com/file/d/1IpCkDc49_al_SZ_d27L0BLQgDlSVBNhE/view?usp=drive_link
what kind of color paper is that?
They call it "Colored Paper". But if you want to search for it, try the keywords "colored paper for engraving". I placed a link in the description in case you are in the same country as me. Please like and subscribe if it helped you. Thank you!!!
Can it strip off after engraving this method?
You can remove the paper residue but the etching/engraving will remain. You can check my other video about engraving on glass using a different engraver.
Qual o nome desse adesivo?
They call it colored paper or laser marking paper.
What program are you using?
The software's name is Laser. It is in the included usb that contains the installer.
Olá, quais configurações você utilizou por favor ?
Hi. I used 100% on power and 80% on speed.
Y cuántos pases?
@@eyaenaelnael3411 I'm sorry for the late response. It is 1 pass only.
Software name? And from where i can download?
The software's name is "Laser". It is included on the package. The file is in the USB they provided.
Hi! How long did it take for you to finish engraving the glass? Planning to buy one for personalized crafts.
Depending on the size of the design. The one on the video took 15 minutes more or less.
Hi friend, this machine engraves acrylic
Hi. Yes it can engrave on acrylics. Always use black paper/Laser engraving paper or black marker.
you can also try using black paint or marker to black one side out then engrave them wipe it all off in onewipea with rubbing alcohol
I will try it on my next project. Thank you! 😊
What’s the name of paper?
They call it colored paper.
Is any complaints on this mission
No, not really. I do understand why it did not engraved properly. It is my fault because I made the design too big for the curvature of the glass. If your glass is bigger, you can try engraving bigger designs.
thank you for this videos
I'm so glad it was helpful!
In the dishwasher this image from the glass does not laugh during washing ?😮
It leaves a permanent mark so I say that the dishwasher won't have any effect on the engraving.
hello po , may I ask po if okay lang po ba na mobile lang ang gamit sa pagconnect sa engraving machine?
Yes po. Basta connected po yung phone mo sa engraver wireless.
what about metal engraving?
Hi. Sorry for the late response. Only fiber lasers can engrave on bare metal. DAJA DJ6 is not sa fiber laser but it can engrave on painted metal. Basically it only removes the paint, revealing the metal underneath. I will make a video, engraving test on painted and bare metal. Please turn on the notification bell because i will be uploading it soon. Thank you!
Great vid po! Ask ko lang po if yung provided program ba ni DAJA gamit niyo for PC and wala naman po bang problems sa pag-install? Planning to get the same unit hehe 😅 Salamat po in advance!
Thank you! :) Yes Sir. Included na po yung flash drive with drivers for windows and mac. In case po na wala sa unit mo, pwede mo po ako imessage para mae-mail ko po sayo. Working din po siya sa windows 11 in case na yun po yung gamit mo.
And I want to add po before you buy, di po kaya ni DAJA DJ6 mag engrave sa bare metal, only on painted metal lang Sir. But still napakaganda niya pa rin na engraver. 😊
@@ajabujabuمطلي بماده ماذا ؟
@@نور-ن1ع4ثthe black material in the video is called "colored paper". I don't know why but if you want to buy it online, that's the keyword you should use 😊
Nakaka engrave po sa acrylic sir?
Hi. Yes po sir. Just make sure na lagyan nyo nung colored paper or black marker. Ang purpose po is para di tumagos yung laser sa acrylic.
Que parámetros de potencia y velocidad usa para grabar acrílico usando marcador negro?
@@montserratgarciavieyra2650 Yo uso 100 de potencia y 80 de velocidad. Pero puedes reducir la velocidad si quieres un grabado mucho más profundo.
@@ajabujabu pwede ba black sticker vinyl?
@@Athatdog Di ko pa po natry pero sa tingin ko pwede naman, basta taasan yung power at babaan yung speed para maengrave ng maayos. Makapal na kasi yung vinyl compared sa colored paper at marker.
how about if I don't want the color in my lettering?
I haven't tried it yet but some people use sandpaper to get rid of the colored paper residue making the engraving white.
@@ajabujabusandpaper?
@@satriaane2113 Yes. Some people use 100 grit but they only sand the engraved part to avoid scratches on the whole design. And some people uses wire brush to remove the black color left by the colored paper.
Cual es el nombre del papel?
They call it "Colored paper". I don't know why, but that is the actual name Sir. Lo llaman "papel de colores". No sé por qué, pero ese es el nombre real, Señor.
La oreja izquierda 🥲 pero todo lo demás bien 😃👌
Yes Sir! I manage to fix the issue by making the design smaller and adjusting the laser focus halfway from farthest to the nearest distance.
a 130 dollar daja laser engraver seems to be ablento do even more stuff than a 3d printer i feel sometimes, everyone should have one
Yes i agree. Even just for a hobby, daja dj6 won't disappoint.
bro, soak it for 15-20mins then remove easily.
I'll try that next time. Thank you!
Not so easy to finish it.
You can soak it for few minutes for faster peeling. It just happen that I am in a hurry so I did not soak it long enough.
Cause I watched this. I now know not to do it this way. Cermark spray is 100 times easier.
I guess you got the wrong idea, sir. As you can see in the video, I did not have any problems with the first engraving. The color paper is not the problem; it is the scale of the design plus the curved surface. Yeah, I know I should know better not to make the design bigger. I haven't tried CerMark spray because it's not available in my country. I hope I can try it someday.
Its the scratching with a Stanley knife. Surely its not good at all for a glass. But I do understand we can only use what we have to hand. And well if it works for you that's fine. :) it's just not for everyone :))
yup or just black paint in a lil 16 doar usb paintnsorayer
@@ajabujabuu must get a small motor and slowly rotate the glass on two rollers you can 3d print a machine that does that and use an existing spinning object like ur usb turn table
where can i get the cermark spray?
Who forgot to use their Safety Glass... @ajabujabu did!!!
My unit did not come with free safety glass so I don't really look directly at the laser. But when I have to check the engraving, I always use the green panel that has the same material as the safety glass. I don't know its name 😅
Could it work for High Density Polyetiline /HDPE. Thanks
Hi. Yes it can. Just make sure that the surface of the material is dark enough to receive the laser. White/light or shiny surfaces is a big NO when using this kind of engraver.