ENGRAVING WITH COLOR😜HOW TO COLOR FILL YOUR ENGRAVING LIKE A BOSS🐱👤
ฝัง
- เผยแพร่เมื่อ 11 ม.ค. 2021
- In this episode of Laser Engraving 911 you will learn the process of back-filling or color filling your engravings on wood! All techniques revealed! Check the full description below to get links to all the tools and products used in this video for maximum success! and have fun! 😎😎😎
_____ LINKS TO ALL TOOLS AND PRODUCTS USED IN THIS VIDEO______🎁
amzn.to/3NI3Pba Assorted Flash Premium Acrylic Paint Set 🚨
amzn.to/3i7ZQ7g 2X Rustoleum Clear Coat Glossy ✔
amzn.to/3bz9grt Ridgid Random Orbital Sander 👌
amzn.to/3sma3li Cedar Wood Grilling Planks 🎶
amzn.to/3skEAjz Machinist Ruler Decimal Style 🥓
amzn.to/3bA9ONu Weeding Tool 👏
amzn.to/2LvABjo Blue Scotch Brand Masking Tape 👀
amzn.to/35zfWSD Assorted Paint Brushes ✌
MORE MUST HAVE LASER ENGRAVERS TOOLS AND SUPPLIES
✌Black Paper Masking Tape amzn.to/3XMIW3e
🐱👤Cloud9 S4 4" Exhaust Fan amzn.to/3lE0SsO
🥓Scotch 3M Blue Masking Tape amzn.to/2UzRavy
✅Private 1 on 1 Consulting With Michael Laser Engraving 911
sonomalaserengraving.com/prod...
✔LASER ENGRAVING 911 MUST HAVE LIST FOR THE SHOP:✔
🚨FIBER LASER and Co2 SAFTEY GLASSES amzn.to/38OUwDb
🤷♂️DATA VAC BLOWER amzn.to/2Kh5CXB
😉DECIMAL MACHINIST RULER amzn.to/38QZeAG
😜BRILLIANCE LASER MARKING SPRAY for Co2 Laser amzn.to/3f735L1
🚨Great Resource For Laser Engraving Equipment and Supplies
laserengravingsupply.com/
*As an Amazon Associate I earn from qualifying purchases. * I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Be sure to like and subscribe for more tips and trick on laser engraving.
#howtolaserengrave #engravewithcolor #colorengraving
To prevent under-bleed start with a clear coat to seal, and then add your color.
THANK YOU
Do you coat it before applying the mask or once you've engraved it?
@@joaquina2447 After applying the mask... if it bleeds, it bleeds clear and seals those gaps.
@@rychei5393 🔥
I would clear coat before the mask. It will fill the wood grain, reducing bleeding under the mask.
I am beyond what you would call a newbie...haven't even reached the newbie stage yet! I have a laser that I've yet to use because I truly don't know were to began. I've been watching a lot of videos to try and get a handle on were to start. Never understood what they would mean by masking and never knew what type of paint to use. They tell you to mask and then paint but... Anyway, I want to thank you for taking the time to explain the very basics of this project. You've cleared up quite a few questions that I had. Looking forward to searching and watching more of your videos. I've already hit the subscribe button. Thanks again.
Thank You kindly, and I wish you the best on your journey!
i love when the people show everything! Thx bro!
Thanks, really appreciate that.
wow! new ways to create professional projects 💪🏼👏🏻👏🏻
I'm new to engraving and found this extremely helpful! thanks for the tip!
Professional painter...best tape for no bleeding and you can leave it on all night ..frog tape..little more expensive,but always bleed-free..the best I have found
As a professional painter did you cringe at him dunking his brush up past the ferrule?
@@Graeme758 As soon as I saw that.. the first thing that popped into my head was ROOKIE......my first-year...apprentices would never do that in front of me I... pay for their tools..would tear them a new one and if hired some guy as an experienced painter and I saw that ..it would be his last day on my job-site
Yes old chap, it is perfectly fine for you to be proud of your work and your contribution. Thank you so much.
Thank You Kindly!
Thanks for your help! Painter tip…do Not put paint anywhere near where the brush and handle come together…it’s just a waste and damages the brush while making it tougher ta clean.
One Work: Spectacular
Massive thanks from Edinburgh Scotland for that tutorial. Is exactly what I am looking for.
Glad it helped, thanks for watching!
Thank you for sharing very helpful video
Great idea, like the options that this gives to making projects pop with color. Thank you for sharing!
Thanks for the support and motivation!
I I have watched numerous videos about lasers and I noticed one common feature "THE BEARD". Cannot grow a beard so I guess I will just hope for the best if I ever get to buy my own laser. Kidding aside the artists that produce these videos and art pieces are amazing. I cannot draw a straight line with a ruler or draw or paint a picture, so I really appreciate what you all do. Keep creating.
With Great Beard, Comes Great Responsibility, Thank You for your support!
Thanks for sharing! This has definitely expanded my horizons!❤
You are so welcome!
Amazing project.Thank for your time
Mind = Blown
The nice thing about this approach is that you can easily determine after half an hour whether you need another layer of acrylic paints or not.
A buddy who works a lot with vinyl cutters uses a cheapo set of actual dentist tools to weed out parts of the mask, low-quality stuff you wouldn't want anywhere near your mouth but is perfect for detail work like that.
Agreed!
Love this video. Thank you so much for sharing!
Absolutely fantastic job!
2 thing I noticed right off as a previous vinyl/heatpress & silkscreen guy... Corel DRAW and the stahls weeder! I never see anyone use Corel on TH-cam. Such an awesome program! great idea with the tape!
Thank you for sharing this!
You can also spray your piece of wood with clear lacquer before putting on the tape (let it dry first obviously) . Then when you engrave the paint is less likely to bleed.
my laser guy actually has me finish the piece before he engraves he then masks and burns
You can hit it with the clear lacquer again after engraving before painting to stop the bleeding to.
This is a super cool idea. I can’t wait to try it out
That came out great.
Thank You!
Awesome instructions! Thanks!
Thank you so much!! I wish you great success.
All these positive comments and I’m only the 20th thumbs up? I can use this information, thanks.
Wow thanks for the tutorial! This really helps expand my ideas.
One thing I would say that would make that product 'next level' and only takes 60 seconds: hit those edges with a router. Just a radiused roundover edge on a piece of wood really enhances the finish of it over a plain cut edge.
Great feedback thanks!
Very Cool!! Thanks for Sharing!
New to engraving here. Thanks for the video, really informative. Some machine you got there also!
Beautiful job!
Bro, first time hitting your channel up and love the detail and how in-depth you go while also making it extremely simple and dumbed down for people like me (beginner with absolutely no design/artistic experience)! I have ordered a new Fusion Edge 12, 40 watt and excited to get started in products like this and others!
Thanks Austin, really appreciate your support
Nice video. Thank you for posting it.
Great video !!! I will try this method with engraving my pen turning projects. Thank you
Great content! I like to use Mod Podge after the engraving but before the painting. Just a thin coat in the engraving will help to better seal the tape to the wood and help seal the engraved edges so the paint does not wick out.
Thank you your a Master of your craft !
I haven't tried this myself yet, but I heard from a reliable source (Bob at ILTMS) that if you put on a quick coat of clear finish BEFORE you use paint, it will help prevent bleeding under the masking tape! That way you don't have to spend extra time sanding off paint bleed. :)
Great tip, yes it works.
Been thinking of doing this- you have inspired me ! Great job of explaining the process. Appreciate you taking the time to show others your skill/craft with videos😀
I highly reccomend giving spraypaint a chance if you use montana brand spray paint either from their gold line or the 94 line you wont have that bleeding issue like you do with glossy rustoleum sprayaint which is oil based
Hi Thanks for the tip, can you explain why this paint wont bleed into the wood fibers, why its do different than standard spray paint, Id like to know the science behind why. Thanks!
You should thin your acrylic paints, they will go on thinner and smoother and won't clog up fine details. 2 thin coats!
cool tip thanks!
I enjoyed this video. Thanks for the tips, especially regarding the choice of paint based on how it interacts with the wood and using a sander to smooth things off 👍🏾
Amazing video thank you for the great tips!
Great video. Thank you!
Really nice job and well done video. Thanks for sharing.
Very helpful video. Thanks
You're welcome
First video I have found to be thorough and detailed throughout the whole process. 10/10
Much appreicted!
alright young man, another well done, informative video. Thank you
Thank you ! appreciate that!
Oh and forgot to tell. 1st have it sand down and use the clear code multiple Coats so that should help to sealed the wood fibers and then engrave that should help or prevent from bleeding. Just a tip should give it a try on a scrap wood
I like it, it's very inspiring.
Excellent video. Thanks.
Enjoyed the video. Thanks for the tips.
Great video! Thanks
Very nice project, thanks for the lesson
3M makes an automotive painter tape that is Green, it has a cost but it is absolutely a fit for this project. Thanks for adding another project to my list. 8)
Ill have to check that out!
Thank you for all the extremely helpful tips, I’m new to lasers and I’ve learned so much from your videos.
You are very welcome thanks for your support!
Hey Michael.. I just asked a question about Vectors in the leather patches on hats video.. I asked about vectors and stuff like that and now I know u have a video on all that stuff too.. Lovely Jubley man.. I know nothing! I'm learning on the fly man so thanks for that information,,
Very interesting technique. Thanks for sharing.
Nicely done. I am just now getting into the business and this was a well done easy to understand video. I think my biggest challenge is going to be figuring out what speed and power to use so I don't waste my product. Thanks
Pretty nice. The 3M blue tape seems to hold pretty good! The clear coat must help alot staying good for a long time
Good and very clear video. Thanks
SO GOOD... thanks. I am NEW TO MOST ALL OF THIS... just got my Genmitsu L8 Pro Max Laser 20w
Thanks for sharing.
This is genius 💡💙
Wow 😮
Wowzzers!
Awesome video!
Great video! .. As of the spray paint bleeding problem it can be overcome with covering the engraved area with modpodge or spray laquer first. I didn't try it myself yet but I saw some videos here showing the process :) Enjoy!
Very helpful video! Thanks! I had no idea you could do this through Corel Draw! Now I’ll be spending the day figuring out if it will work with my ORTUR. JUST A suggestion to avoid bleed through and having to sand is : first coat of a colour similar to your wood, allow to dry and then add your colour. This is very effective when painting with vinyl stencils on wood.
Excellent video sir! I just wish I would have seen this last week when I was doing my project. Now I know something. 😃
Definitely going to give this a go. Great idea
Nice, do it!
I like the idea!!!
Thus was rich and amazing.. thank you very much
Thank you for this, it looks great!
Glad you like it! hope you get a chance to try this!
I’m looking forward to trying this.
Nice have fun!
Hola...
Excelente trabajo, el resultado es genial...
Muchas gracias por compartir éste proyecto...
Saludos.
Dude rocks. Clicked subscribe right before you mentioned it - now looking at the links. Quality stuff.
TY Jim, glad you enjoyed!
Nice......FKN FANTABULOUS.....love it.....
Awesome!! Thank you! 😊 & I subscribed.
This is a great idea
Great job man keep making videos
I use a similar technique when making signs with my CNC. I first spray my wood with a sealer (clear lacquer for interior projects or spar urethane for exterior projects). I then apply a strip of Oramask 951 (instead of painter's tape). Once carved, I reapply a thin layer of sealer to the exposed wood. By sealing the wood, I can use spray acrylic paint without concerns of bleeding.
I'm looking at a Xtools S1 in the near future. I didn't think about using the same technique for the laser carvings until this video. Great work!
Thanks!
Good content. You are a good teacher for somebody like me who is just getting started. I hope to see more.
Liked and Subscribed.
Thanks BG!
loved this tutorial. Very new to lasers, in fact I dont get my machine for another couple of weeks, so doing lots of research in advance.
thanks so much for taking the time to do this, and explaining the process so well. liked and subscribed and cant wait for more
Terry
great vídeo
Appreciate that!!
Nice, thanks bro!
Great tutorial, you explain yourself very well. Can’t wait to get my engraving machine in the next week or so!
Please which machine you use ?
@@ikbal2599 I have a L1 Pro Laserpecker that I am trying to get rid of. It is brand new and you find it on Amazon.
Excellent ! Thank you
Glad you liked it!
Great!
One other thing to consider, is to spray the clear coat on the wood before masking to stop the bleed of the paint. You would want to let that stand in open space for a day so that it doesn't gas off in the laser.
def all good ideas, I would just make sure that the the tape does not peel up the clear coat, but hey if it works, that's another great tip!
@@LaserEngraving911 Just spitballing, but I'm assuming using lacquer wouldn't cause a peel issue? Even if it did, another coat of lacquer over the entire project at the end should blend everything together.
Nice video!
Not necessarily however, if that works for you, cool!
Excellent!!! Thank you so much!!!
Glad it was helpful!
I have some blue stencil vinyl and I think I'll try it with that. Got it when I was trying to do some silk screening. Great video and makes it so easy!
awesome!
Look great
Way cool.
Nice explanation. I'm getting my engraver in a few days and this is something I'll trying the first day. Thanks!
Thanks!
Cool thanks for sharing your ideas buddy!
Any time!
Fantastic video! Will try tomorrow...
Have fun!
So Simple....never thought of That!
, glad you liked it!
Nice! Thank you so much!!
You're welcome!
This is amazing. Thank you.
Nice!!
Nice video. Thanks