He went off the road and almost died | Chevy impala rear suspension work
ฝัง
- เผยแพร่เมื่อ 5 มี.ค. 2024
- THE MOBILE MECHANIC SETUP -
STARTER KIT
the best scanner for the money amzn.to/4310HOF
Craftsman 450-Piece Mechanic's Tool Set amzn.to/3IjDq0N
Beam Torque Wrench (40-250 ft.-lb.) amzn.to/3wIcs0e GEARWRENCH 16 Pc. Ratcheting Flex amzn.to/49RybRH
Streamlight amzn.to/48AxmMf
BRAKE SETUP
SINGLE PERSON BLEEDER amzn.to/49xohox
Dual Piston Brake Caliper Compressor amzn.to/3wBynGv
Brake Tool Kit amzn.to/3TjDFQ2
ELECTRIC TEST KIT
Autel POWER PROBE WORKS GREAT amzn.to/49pGXqp Fluke amzn.to/3V0XfSm
The new trailing arm upside-down? factory ones the u shape is facing the ground and I hope the new lateral arms have proper control over bumps because I've done these on mine and the new lateral arms had softer thru bolt hole bushings and the holes were just a tad bigger giving mine a rear end skip over bumps, my proper fix was to return those new junk premium lateral arms to napa and use another pair used from junkyard car and it fixed the issue that was caused by the napa arms,, I did this in a pinch untill I ordered BMR Lateral arms which cost double but now I have arms with no rust and these BMR arms are made to proper spec/fitment, The normal replacement ones aren't, I've tried from all local parts stores in my area and all of them varied for the thru bolt but they also had too soft of bushings, if you still have this impala at your shop then raise it back up and check for wheel play on the side with new lateral arms, cool video!
Yeah you are right it is upside down shoot. I don’t think it will make a difference everything is tight
Promo-SM