Brembo RCS19 and RCS16 Master Cylinder | Longterm Review [My Experience]
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This one is a long one and hopefully you’ll find this video insightful! This is my Long Term Review of the Brembo RCS Universal Master Cylinders after installing and riding with them for several months. It’s not a quick simple installation but completely worth it. You’ll have full adjustability, amazing lever feel and will change the look of your handlebar for the better. Both Brembo RCS 16 and 19s are modular incase you need to replace parts. They DO NOT, include the brake and clutch fluid tanks, tygon tubing and a banjo pressure swtich. All components can be found on the www.motovation... site. Lastly, in some cases, you might need to swap out your steel breaded brake lines. Contact the team in the link below if you have any questions.
Shop All Parts Shown in this Video
www.motovation...
Leave a LIKE if you enjoyed the video!
SUBSCRIBE ► / motovationusa
Music by Gurty Beats
INSTAGRAM - / motovationusa
FACEBOOK - / motovationusa
TWITTER - / motovationusa
#bremborcsreview #rcsmastercylinder #longtermreview
I had to dig deep through several HDs to find footage for this one. The Longterm reviews are quickly becoming my favorite. After the excitement, my opinion is usually clear about the product. Hope you all enjoy and let us know if you’d like to see the step-by-step installation without me freaking out parts. Lol
I'd love to see detail installation video. Right now, my biggest concern is existing brake hose - if it can be reused as is, or if I need to change the fitting or if I need to change whole whose between master cylinder and ABS unit.
Will be watching this happily at home in the big screen. Stay safe out there fellas.
Will be watching this at home on the big screen. Stay safe out there fellas. 🙌🙌🙌
I just installed brembo rcs 19 on my 2020 zx6r. Was not a plug and play but I did not cut any wires coming from the bike. I took the old swith and removed the two prongs that go into the connector coming from the bike and soldered those prongs to the wires coming from brembo switch. Plugged them and taped with electrical tape to secure. Now if I ever need to go back to stock I can just buy a new oem switch and reinstall.
Solid info as usual. Never realized brembo did other products other than brakes.
Off topic: I know NY was hit bad with the CVirus. Stay healthy my dude.
Great to hear the brake master cylinder made a difference to you. I have a monster similar to yours and I love the stock brake feel as is. My Honda cb650r has spongy brakes and I’m trying to improve it by installing an aftermarket brake master cylinder. Aiming for Frando or Nissin (cos brembos has a high chance of getting stolen). Thanks for sharing your feedback. Now I have to figure out whether i need a 16mm or 19mm for my bike.
Pure sales hype. Took ten minutes to get to something of value. Then the least amount of time spent on probably the most important feature, the piston actuation adjustment. How does the 16-18 change work? Does 16 provide more pressure or does 18? Which does what? This is important to someone who needs higher pressure with lower grip strength while moving enough fluid to actuate the brakes.
How about getting a better explanation of how everything actually functions for those who need that information? Just not a good informative video on the actual part, but by God we know he would have done this first if done over. We know he thinks it's worth it, but nothing about the technical aspect of why it is so good. That was what I needed to know - how it all functions so I know if it will do what the rider wants.
I get the impression this master cylinder could provide the pressure at the lever that would normally take two different master cylinders, that the 16 setting provides the braking feel of a different size master cylinder than the 18 does. If so, which is which and why? This may be the reason to buy this product, to get the performance of a smaller piston master cylinder while being able to move more fluid to get the braking pressure needed.
Thanks for this. We need a bit of normalcy in our lives right now. 👍👍
Its safe in the garage spinning wrenches...or at home watching TH-cam!
Looking forward to the installation video, to hell with entertainment, I'm after information! :)
How exactly do you figure out which master cylinder works well with your calipers? And what would a bad combination look like? Is it possible to exceed the brake pressure your calipers can handle? I'm thinking of upgrading, but I have Nissin calipers and am not sure where to start.
RCS19 is for all motorcycles with axial or radial twin 4 pot calipers
Mike I love how everything on your monster has a real purpose. You hand picked every single mod to the tee. Clearly a dope looking unique monster. Still would like to see an updated walk around. 🔥🔥
Although the install seem difficult for an amateur, it still sound like the upgrade is worth it. Appreciate you for giving us your personal opinion and experience as usual. 🙌🙌
Denny King This install is not for the faint of hearts. Anything that requires snipping cables makes me nervous. That entire process was a growing experience. Soldering, vacuum sealing the wires and heat shrink wrapping is an adventure in its self. I learned a lot about the bike and myself.
I am not trying to hate on you but, i find it strange that you are telling people to buy all these different pieces required for the brembo master cylinders.
When you buy brembo products, no matter which master cylinder, the brake fluid reservoir, the bracket etc is all included within the box itself.
Maybe from you are, it’s different, but for the same price Everything is included within the same box from brembo itself, all brembo products.
Good review bro. Much appreciated. Got the rcs19 and matching lever for the mt09
Nice vid. I swapped out the Maguro clutch master on my 1290 Super Duke for the same as you mention. Nice quality feel, and much superior. KTM had to do some work on the ECU for the swap.
Those reservoirs are clean!
I know this is an older video but on the single banjo bolt pressure switch there's just two black wires. How do you know which is which? Or does it matter? Which goes to the blue wire and which goes to the black wire on the oem switch? This is for my rcs 16 clutch master cylinder.
I've been searching everywhere for the answer to this. Which wire goes to blue?
Excellent explained, and detailed.
My last mod, but one of the best.
I want that hoodie so bad Mike 😂
Any instructions on how to install brake light switch
Nice video. I have tried but I can not found the installation master cylinder on your channel. Can you suggest where can I find it?
2015 Suzuki GSX-750R w/ OEM Brembo Front Calipers
Brembo 19 RCS
CORE Coated SS Brake Lines
Galfer Superbike Wave Rotor (Race - the slotted ones)
EBC Pads
Never experienced brake fade. The master cylinder was the pièce de résistance.
you mentioned that the RCS19 matches perfectly with your front calipers. are these the stock brembo calipers that come with the 1100S?
I had installed RCS16 MC onto my Hayabusa Gen 3. With the switch installed the bike jerks and its sensitive. I pulled out the switch and it works good..is it safe not to install the switch?
is there an installation video of these out yet?
for a Gsr750 with abs with braided hoses, do you recommend a brembo rcs 17 or 19? what are the differences for road use?
for a Gsr750 ABS. a 17 or 19 is better for road and mountain use
I am thinking of upgrading to brembo rcs 19 for z900 2020 model will it worth? It comes with nissin calipers.
I dont know how biased the review is, he is representing the company who is selling them.
how can you see your footage in your cell phone while riding?
Hot Rod 101. When you order that super trick part you just have to have the next thought has to be this. What's it going to take to make it fit. If you can't go there don't order said trick part. Ordered RCS19 because I'm going there 😆
Are there any side mirror brackets on the rcs19?
hey, why does the bike need to be on when bleeding the brakes? The fluid is still going through the ABS system, or isn't it? Does it have something like a chamber or something that only can be filled up when the ABS module is runing? Does the bike has to be running or just On in the ignition? I'm changing everything on my bike, from master cylinders, brake hoses and brake calipers and i'm doing it myself.
That's some good info in this video to help us getting things done right, if you could explain ABS system part, I would really appreciate!
You have to have the bike on to get the ABS valve body to allow the new fluid into it. Normally on cars or trucks they'd hook it up to a scanner and have the scanner talk to the ECM to actuate the ABS system (valve body)....you can trick the ABS system into activation by simulating an ABS event by having the drive wheel up off the ground and maybe the front as well and make them spin at different speeds; so if you put the bike into gear while its up in the air and the drive tire is spinning and you spin the front tire as fast as you can by hand it makes the ECM think the bike is in the middle of a tire spin event and will turn the ABS system on, new fluid will flow into it and flush or push air out of it as well.
Bro what is this jacket that you're wearing
And ehat id that R, N, S switch which rotates there??
So glad you asked!
www.motovationusa.com/what-is-the-big-deal-about-brembo-rcs-corsa-corta-master-cylinders-
@@MotovationUSA thanks man...
Sure thing!
Brembo Aliexpress?
Would love to know the brand of those reservoirs?
Rizoma Wave Fluid Reservoirs have unfortunately been discontinued.
@@MotovationUSA Oh darn, what a bummer! Thanks for the reply! Great video!
Motivation USA doesn’t even have my bike model Triumph Tiger 1200
We are constantly expanding our bike listing. So stay tuned. Thank you for watching.
I have same problem on clutch side.
I bought a 16rcs corta corsa and it doesnt have two holes for clutch switch......
What i need to buy can you let me know plz help 🙂
alot of waffle