How to test Accumax Hydraulic solenoids
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- In this video i'm showing you guys how to test solenoids, i really do recommend Accumax solenoids for you lowriders, hoppers.
I created this video with the TH-cam Video Editor ( / editor )
thanks alot for posting up videos i run a custom shop and trying to help lowrider come back harder then ever but we really cant do that with no lowrider shops around here ..so learning something every day thanks alot
Thanks man, I'm glad you like the video. More videos coming soon.
Jose D Avelar agreed!
Gracias carnalito helps alot
Can i test them with out taking them off( Hookd up as is), or have to takem of and do 1 by 1? Thank you.
Should every one light up on light test? From it being on ground and touching each of the four screws thanks
Very helpful video .👍
Thank you for explaining how to test solenoids. With hydraulic solenoids, after the engagement click, should atmospheric air pass (blast) through the ports if no hydraulic lines are connected? My new solenoid just clicks and gets really warm for minutes without pushing air through the ports.
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⁸7j88h78j7j8j8jj8j8j8j8j88j8j8j8878888jj8j8j8j88j88
Mines click but does not pick up
If I pick up the bin manually and it gets stuck up you press the button and it goes down but when you press the button to go up it just clicks
Could it be a bad solenoid
Could be a bad solenoid, bad connection or corroded wire
What wire you use on the solenoid
u still need voltage meter light not enough under 12 volt will power the light
my solenoid is making a buzzing noise, do you know why?
Did you figure out the issue??
low battery voltage
Thanks for the reply!!!! I believe thats whats happening to mine!!
Very helpful
I have a problem with my solenoids i am runnin 36 volts for the front when i hit the switch UP the cables and solenoids are HOT and burning 2 solenoids , i install 2 accumax and keep one duralast and now when i hit the switch UP it stuck
MXL686
Are they properly grounded? Are they tightened to the bracket and are the cables tightened? Sometimes when they are slightly lose they will heat up.
LowLows & More! I Will check all Tomorrow thanks for the info
Awesome dude!! Is this the same way for a three pronged solenoid?
If your talking about the solenoids with the 1 post on top instead of 2 posts then yes.
Good ass shit!. 😷 Neede'd this help. Thank's.
I did/nt see you ground the solenoid ?
zane lile
At 3:10 i tell that my ground is connectes by the blue wire.
Dude you should have shown when you connected all the wires, why didn't you show that? 🤔
pancho villa
I said how to hook it up, i showed it after words also
LowLows & More!
Oh l had to keep seeing the video, but yes you did say it.
One question my set up has battery going to one side of cylinoid and the pump going to the other side of cylinoid. So please tell what part do l hit with the tester ? 🤔
pancho villa
Put the test light on the side of the solenoid where the cable goes to the pump.
LowLows & More!
So cool 😎
Thanks dude !
LowLows & More!
Sorry but one more question, my set up is small and everything is going to be still connected.
Is it ok if everything is still connected while testing? 🤔