Very good as always. Although it didn't need it to be done I would liked to have seen you calbrate the steering angle sensor after being disturbed during the removal/replacement
I’ve done this but even though I removed the battery. I’m now getting a check ESC warning. Have I done something wrong … could the steering angle sensor need calibrating?
Excellent job. I have a Duster here in India ( first duster - X79 type). I am planning to install the cruise control using your above video as reference. Hope it should work. If you don't mind, can you please share the cost of the cruise switch and steering wheel?
I have renault master 2013 and have Check ESP light....i think it coild be the steering wheel angle sensor....(i recently had to take steering wheel column off to do some work under dash). Any tips how to recalibrate it or solve issue? If, indeed that is what is causing it..thanks
Not sure on that one, if it needs the scan tool to calibrate... but if you can't do it by turning the wheels from lock to lock, and/or driving it in a straight line, then I guess it will need the scan tool... or, you have an issue with the steering angle sensor... Have you scanned the car? 👍👍👍
@@LMAutoRepairsyes scanned it..but as the esp warning doesnt come on until i drive, scanner doesnt recognise fault.. Tomorrow i will try the lock to lock and drive it locally and see what i can do...thanks for responding...👍
No... if I recall correctly, I got it from eBay... Part number should be stamped in the old Part... That said, jut check compatibility, and you should be fine... 👍👍👍
@@LMAutoRepairs btw DID it solve the problem completely? I gave Renault Megane IV 2016 and I experience the same issue, when turning the weel my cruise control shuts off?
@@LMAutoRepairs I could be wrong, but in the first video, where you installed the cruise control, you said that the customer also asked you to install the parking sensors and back-up camera. I was wondering of you were planing on posting a video on that too
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
You are an absolute star, I had the same problem and thanks to you it is now solved. Thank you so much, keep up the good work.
☺️
👍👍👍
Very good as always. Although it didn't need it to be done I would liked to have seen you calbrate the steering angle sensor after being disturbed during the removal/replacement
Got you...
👍
Thank you for watching and for your comment!
Really enjoyed the step by step procedures, awesome job!!!
Thanks!
Thanks very much for the follow up and the previous video. Great channel.
No worries!
Thank you for watching and for your comment!
Hi, i have the same problem with my 2017 vivaro, how i can get in touch with you to fix my one ? Thank youu
Can this be done with a 2005 2.5dci135 Renault Trafic. The clock spring only have to connectors coming out of it.
Thank you for another great video!!!
Thanks!
how do you get round audi and vw protected parts ??????
Great follow up , thanks .
Thanks for watching and for your comment!
👍👍👍
Great job.Congratulations.
Thanks!
👍👍👍
I’ve done this but even though I removed the battery. I’m now getting a check ESC warning. Have I done something wrong … could the steering angle sensor need calibrating?
Most likely will need calibration...
👍👍👍
@@LMAutoRepairs yeah just been to the garage. That’s what it was
@Magicmat
👍👍👍
Excellent job. I have a Duster here in India ( first duster - X79 type). I am planning to install the cruise control using your above video as reference. Hope it should work. If you don't mind, can you please share the cost of the cruise switch and steering wheel?
🤞
Hope you succeed!
Thank you for watching and for your comment!
I have renault master 2013 and have Check ESP light....i think it coild be the steering wheel angle sensor....(i recently had to take steering wheel column off to do some work under dash). Any tips how to recalibrate it or solve issue? If, indeed that is what is causing it..thanks
Not sure on that one, if it needs the scan tool to calibrate... but if you can't do it by turning the wheels from lock to lock, and/or driving it in a straight line, then I guess it will need the scan tool... or, you have an issue with the steering angle sensor...
Have you scanned the car?
👍👍👍
@@LMAutoRepairsyes scanned it..but as the esp warning doesnt come on until i drive, scanner doesnt recognise fault.. Tomorrow i will try the lock to lock and drive it locally and see what i can do...thanks for responding...👍
Sorted 😊!!! Thanks for sharing sir 👍👍👍
😊
Thanks!
👍
very good my brother
Thanks!
But did you use equal the same "clock spring/squib" just the brand new or different one with different part number?
Like for like... not sure about the part number...
Thank you for watching!
how much time involve in this job? no Smarts 453 coming to you for repair? thanks
Hi
Half hour? Give or take...
Actually working on a 451... Lol
Thank you for watching and for your comment!
Hi, did you buy the clock spring from a main dealer? How did you find the part number? Thanks.
No... if I recall correctly, I got it from eBay...
Part number should be stamped in the old Part...
That said, jut check compatibility, and you should be fine...
👍👍👍
Hi I have 2015 vivaro crew cab and my air bag light will not switch off any advice please
Yes... scan the car... and go from there...
Otherwise is pure guess work...🤷♂️
Thank you for watching!
DO you need to disconnect your battery when fidling with the airbag?
Highly recommended!
👍👍👍
@@LMAutoRepairs btw DID it solve the problem completely? I gave Renault Megane IV 2016 and I experience the same issue, when turning the weel my cruise control shuts off?
Yes...
The issue was resolved...
👍👍👍
Any word on the install of the parking sensors on the Trafic
Hi
What do you mean?
Thank you for watching and for your comment!
@@LMAutoRepairs I could be wrong, but in the first video, where you installed the cruise control, you said that the customer also asked you to install the parking sensors and back-up camera. I was wondering of you were planing on posting a video on that too
@@Wiejoewiejoewagen
Ah... got you... yes, there is a video for the installation and coding of the radio for the reversing camera...
Stay tuned...😉
@@LMAutoRepairs Super, looking forward to it
do i need to disconnect the battery before unplugging the air bag
You should... 😋
Thank you for watching and for your comment!
Nice follow up just did one on a daf 55 was a bit easier than your tbh
👍
Where you bought the new clock spring?
Ebay... if I recall correctly...
👍👍👍
@@LMAutoRepairs how much you spend?
Can't remember now... and has been a long time, and no longer is on my purchased items...
Great follow-up. Good job. Thanks for sharing 👍
No worries...
Thank you for watching!