Super video! Many Thanks. My mobula 7 hd one of the ESC doesn't work, the motor don't start and I check with one of the other motors sow I am sure is one of the ESC. The question is it can be fixed or I have to change the board ?
Swap the motors wires over for one of the working ones to check if it's the ESC or the motor. If it's an ESC that's blown, you'll need a new CrazyBee board.
happened to me too. will be replacing a 5v reg soon.In the meantime i got a F4 pro v3.0 board. And could i still attach a capacitor to the lipo batt line like before? For extra precaution ? They say its not needed buti want ur take on this. thanks in advance !
Very helpful, thank you for your video and time, BUT so if I understand correctly, I need to put a XM Plus receiver on the board since the quad will not bind with the receiver? Here's my story, (short version) I have had 2 brand new boards and when I first plug in the battery there is a small amount of smoke. Happened on both FCs I received. Everything works on Beta flight, the motors and all work but it will not bind to the receiver. Is this normal? or is it because I need the XM Plus receiver installed? I've been working on and off with this for 3 years. When I hold in the bind button on the board the flashing lights go out and do not go solid to bind. But the green light is on. Thank You again Great video
Excellent tutorial! Keep up the good work. Planning on getting one of these as my first first into the hobby. Noticed the absence of the buzzer and poor antenna placement. Any other mods you’d recommend?
Hi. I tried installing a happymodel ep2 express lrs rx in mine and cant get the Serial Rx to save in betaflight. When I set it, it just reverts to disabled every time . I have set the Receiver to Serial and Crossfire in the receiver section. Any ideas? I cant even get the soft serial that I want to use to have VTX smart audio on to save either.
Is it possible to add an external FRSKY receiver to a FLSKY Mobula7 HD board? Snatched the flsky version instead due to discount. I think it shouldn't be a problem but just wanted to make sure before taking it apart.
This is so awesome. You get into so much more board troubleshooting than my other subbed channels! Can I post questions too? A ESC died on my mobula7 HD, and while troubleshooting I accidentally pulled a wire out of the motor. It seems impossible to fix so I'm trying to get another board and motor, all sold out of course. Subbed :-)
Bonjour je vais en recevoir un mais je me suis trompé de rx (flysky) pensait vous que je peux faire quand même lupgrade pour pouvoir l'utiliser en frsky ? Merci d'avance bonne journée et merci pour les informations
I really appreciate all your information. I just got the Mobula HD and I plan to move it to the Whoopee frame that you showed in another video. I have a question if you don't mind. My Mobula has the V3 board and there is a little square PC board in the top of the canopy that I can't identify. Its about 1/2" square with power leads running to it. I haven't seen any one mention it and I don't see what it would do since its only connection is the power leads. Thank you
That's an RGB Breath LED voltage indicator. The LEDs glow and pulse depending on the battery voltage. www.happymodel.cn/index.php/2019/03/01/rgb-breath-led-voltage-indicator-for-mobula7-hd/
beautiful video thanks! I also have a microdrone with f4 v2 crazybee and for a few days I haven't been connected to the radio anymore, I think the internal SPI frsky is broken. consequently also the caddxtartle v2 gives me a gray screen, but I see the data, is it a consequence of the receiver or is it another problem in your opinion?
this is great way to upgrade with XM+ and ofcourse my mobula 7 hd can't do that because i just have flysky controller :) but soon i wish i could upgrade my remote to taranis qx7. great job, great tutor!
I think it comes with a buzzer now. Mine did. My mob7 keeps restarting when i touch the battery cables/power cables. How do you replace the power cables on the mobula 7? Do you think it could be something besides the cables? Thanks and great video.
My Mobula 7 needed a replacement 5v reg after about a week of use, also a separate rx as the spi one wouldn't keep bound to my transmitter, I also added a buzzer and swapped the camera too as the light /dark transition was very bad on the original. So not much original Mobula7 left really !!! Still flying though after many many flights 😊
I landed in grass very softly after a 20 meter first flight. Now my Crazybee F4 Pro V2 will still power up, but I don't get the 4 beeps at the end, like I used to. I can't spin up the motors in Betaflight, and even though it's still bound, and my QX7 shows it's bound with switches all working. Can't get motors to spin. Fragile boards! This my 3rd bad one. My Mobula7 HD burst into flames on 1st power up from the stock battery, 2nd FC simply wouldn't power on. This 3rd one actually flew for 2 meters! AMAZING! LOL I guess I should be happy?!!! 😩 🙄 So, do you think this board can be fixed? My guess is the ESC's are bad? Or?? ... If it can be fixed, how would I go about doing it? Thanks so much for your time... I really love your channel! 😁👍
not sure but adding capacitor might help....check here www.banggood.com/Happymodel-XT30-Plug-Pigtail-Power-Wire-with-100F-Capacitor-for-Mobula7-HD-TRASHCAN-UR85-UR85HD-Crazybee-F3-F4-PRO-Flight-Controller-p-1476203.html?rmmds=search&cur_warehouse=CN
Nick Burns(US), who received one of the the very first pre-productions from Banggood used and recommended 2S. And it flew forever. I have watched 4 reviewers videos, and 3S fries either the board or the esc from 1 day to, at most, few weeks.
The V2 version of the CrazyBee has very electrically noisy ESCs that produce large spikes on the power rails. Sometimes the ESCs fry but more often the 5V BEC can't cope with them and fries. The V3 version is much better and has upgraded ESCs and different BEC - 5V buck inverter.
It's easily done if you hold the soldering iron on the pad for too long, I recommend not just relying on the flux in the solder. Use some separate flux like Amtech. You'll need to dig around with a multimeter to try and find other buzzer connections on the PCB. There's no schematics around so it'll be a voyage of discovery.
@@WhirlyBloke Yea, thank You WB. It was not so easy with the conformal coating i applied on te board :) Therefore i asked the question. I received another quad with this board in the meantime, and was able to fix it - there are 2 or 3 alternative points. But strangely i found no alternative for the buzzer-
@@WhirlyBloke I fixed my problem with buzzer+ pad. But if i had this problem with buzzer-, i would not be able to fix it. (That was a remark only, it surprised me i found no alternative for buzzer- on the board.) I really appreciate Your support and knowledge!
Thanks a lot for these awesome Video. There is much to learn from you :) Which Video explains the problem with the XM+ ? I didn't saw the Link. I have the same problem to bind my rc with the XM+. I did bind on SBUS and set everything. Now when i start i have a huge delay on the control. Also i have the question what the AUX 12 deflections are in Betaflight after binding with the XM+ on one of your videos? I'm new with quad's so there is a hole to fill with knowledge :D Hope you can help here :)
Smartaudio vtx now at tx1, can i move to tx2 after install xm+ receiver, because i cant enable vtx smartaudio after install signal wore from xm+ to irx1, ??
Hi! Just saw this video and noticed that you had RSSI working. I have a FlySky FS-i6 flashed with a modded firmware that allows it, among other things, to receive rssi information. That being said, I don't see any activity in the Receiver tab in Betaflight. Could it be because of the FlySky version? Did you have any problem setting it up? I'm not an expert and this is my first drone, so there's a real chance that I missed some step that was key to enabling RSSI. Thanks for any help you might provide. You won a subscriber :)
hye i have buy fc crazybee f4 mobula 7 from my friends when i connect the usb the fc suddenly smoked. does fc already broke down can i know what the problem
Sounds bad. If it's smoked it's probably the 5V BEC. The V2 version of the CrazyBee is very fragile and it;'s a common problem. If you're going to replace it, I'd recommend the V3 version which has been sorted.
Set up the switch you want to use on your transmitter and then use Betaflight Configurator to assign it to the buzzer. Follow this through to see how it's done. th-cam.com/video/OWOPFgk8SyE/w-d-xo.html
The Mobula7 HD is very good but the CrazyBee F4 is a bit fragile. iFlight CineBee is more solid but suffers a bit of jello. Easily fixed with soft mounting and ND filters.
First off I'd like to thank you for this video! It's the only one I've seen with such great detail on the why the where and the what so thank you!I've had my mobula7 HD and it still runs perfect. I'd like to install the regulator before I burn it up. Should I also add a capacitor and if so should it be I stalled on the xt30 lead or after the regulator?
Yes, but make sure you connect the CrossFire receiver to the RX1 No Inverter pad, not the IRX1 pad I did for the XM+. Remember, CrossFire uses non inverted serial signals.
Was scared I'd gotten a counterfeit when my FC board looked different from yours, but apparently they're now shipping this quad with the CrazyBee v3 which has a completely different pinout. It's item ID # 1534753 on BangGood if you want to put that in the description or something. Anyways, thanks for the concise and informative video. Was just looking for where to solder my XM+ to (ironically I couldn't get that from this video) and hadn't even considered adding a buzzer or adding a conformal coating to the bottom of the FC. Now instead of just more range I've got a pretty upgraded quad. Have you messed with the tune at all or are you happy with the stock PIDs?
@@WhirlyBloke Any interest in a 3D printed guard to keep your wires from potentially getting caught up in the motors? I'd have no problem sending you one as a thanks for the helpful video.
haha I can't believe you fit all that crap in there... I've been wanting to upgrade my mobula receiver due to intermittent failsafes, but i was worried about fitment. Now i see it is possible, thank you
Great vid, tnx! I have build in now a new receiver and every thing is fine now, the original DSMX RX was not able to work in my mobular7. Thats trouble shooting work at its best......... ;-)
Excellent info, I 've just installed a xm receiver, works perfect. The mod does stop smart audio feature from working, I followed another helpful video I used a while back on another build to fix the issue, th-cam.com/video/TaCD_oa-XBk/w-d-xo.html just be aware the resource ID will obviously be different on the CBF4 board and you wont find the transponder entry either. Thanks again for the info WB. :-)
@@dcclark01 ahhh ok i've already listed that video :-( ok i will have a think about it and come back to you, if ofcourse you have not already found a solution?
Just ordered xm+for my trashcan and this video is spot on how to tutorial so thank you
Great to hear! Thanks for watching.
Super video! Many Thanks. My mobula 7 hd one of the ESC doesn't work, the motor don't start and I check with one of the other motors sow I am sure is one of the ESC. The question is it can be fixed or I have to change the board ?
Swap the motors wires over for one of the working ones to check if it's the ESC or the motor. If it's an ESC that's blown, you'll need a new CrazyBee board.
Videos like this are so helpful - thanks WB
Very helpful video, in particular the 5v regulator trouble shooting and replacement.
Is this the part 2 video? Noticed you've changed motors into props-out but didn't hear anything about that in you video.
happened to me too. will be replacing a 5v reg soon.In the meantime i got a F4 pro v3.0 board. And could i still attach a capacitor to the lipo batt line like before? For extra precaution ? They say its not needed buti want ur take on this. thanks in advance !
Very helpful, thank you for your video and time, BUT so if I understand correctly, I need to put a XM Plus receiver on the board since the quad will not bind with the receiver? Here's my story, (short version) I have had 2 brand new boards and when I first plug in the battery there is a small amount of smoke. Happened on both FCs I received. Everything works on Beta flight, the motors and all work but it will not bind to the receiver. Is this normal? or is it because I need the XM Plus receiver installed? I've been working on and off with this for 3 years.
When I hold in the bind button on the board the flashing lights go out and do not go solid to bind. But the green light is on.
Thank You again Great video
Hi
Thanks for the info.
Could you please do a video on soldering on the crazybee f4 board.
Thanks.
Excellent tutorial! Keep up the good work.
Planning on getting one of these as my first first into the hobby. Noticed the absence of the buzzer and poor antenna placement.
Any other mods you’d recommend?
Thanks fur the feedback.
Can you help to fix the same problem on MOBULA 8?
Thank you.
Hi. I tried installing a happymodel ep2 express lrs rx in mine and cant get the Serial Rx to save in betaflight. When I set it, it just reverts to disabled every time
. I have set the Receiver to Serial and Crossfire in the receiver section. Any ideas? I cant even get the soft serial that I want to use to have VTX smart audio on to save either.
Is it possible to add an external FRSKY receiver to a FLSKY Mobula7 HD board? Snatched the flsky version instead due to discount. I think it shouldn't be a problem but just wanted to make sure before taking it apart.
Here ya go www.happymodel.cn/wp-content/uploads/2019/03/Crazybee-F4-Pro-V2.0-no-receiver-Version-Connection-diagram.pdf
This is so awesome. You get into so much more board troubleshooting than my other subbed channels! Can I post questions too? A ESC died on my mobula7 HD, and while troubleshooting I accidentally pulled a wire out of the motor. It seems impossible to fix so I'm trying to get another board and motor, all sold out of course. Subbed :-)
That's the problem with popular stuff - you end up with a supply drought.
Bonjour je vais en recevoir un mais je me suis trompé de rx (flysky) pensait vous que je peux faire quand même lupgrade pour pouvoir l'utiliser en frsky ? Merci d'avance bonne journée et merci pour les informations
I really appreciate all your information. I just got the Mobula HD and I plan to move it to the Whoopee frame that you showed in another video.
I have a question if you don't mind. My Mobula has the V3 board and there is a little square PC board in the top of the canopy that I can't identify. Its about 1/2" square with power leads running to it. I haven't seen any one mention it and I don't see what it would do since its only connection is the power leads.
Thank you
That's an RGB Breath LED voltage indicator. The LEDs glow and pulse depending on the battery voltage. www.happymodel.cn/index.php/2019/03/01/rgb-breath-led-voltage-indicator-for-mobula7-hd/
beautiful video thanks!
I also have a microdrone with f4 v2 crazybee
and for a few days I haven't been connected to the radio anymore, I think the internal SPI frsky is broken.
consequently also the caddxtartle v2 gives me a gray screen, but I see the data, is it a consequence of the receiver or is it another problem in your opinion?
Probably the internal RX. It's hopless.
@@WhirlyBloke i can try with a xm frsky... Maybe the caddx will work?
@@gabrieledubbini3255 Go for it.
this is great way to upgrade with XM+ and ofcourse my mobula 7 hd can't do that because i just have flysky controller :) but soon i wish i could upgrade my remote to taranis qx7. great job, great tutor!
Thanks for watching and the feedback.
How did you take the props off? Mine came with the props on so tight that even the prop removal tool just bends when I try to use it
Hold the motor bell and carefully twist the props off.
on stock frame what other motors i could use and replace?
Hi mate just wanted to know if you had the chance to test it after the mod and did you have anymore problems after that thanks
It get used quite a lot and it's been no problem, especially now I'm locked down indoors.
I think it comes with a buzzer now. Mine did.
My mob7 keeps restarting when i touch the battery cables/power cables. How do you replace the power cables on the mobula 7? Do you think it could be something besides the cables? Thanks and great video.
Maybe they've been watching my videos. Thanks for the feedback.
My Mobula 7 needed a replacement 5v reg after about a week of use, also a separate rx as the spi one wouldn't keep bound to my transmitter, I also added a buzzer and swapped the camera too as the light /dark transition was very bad on the original. So not much original Mobula7 left really !!!
Still flying though after many many flights 😊
I landed in grass very softly after a 20 meter first flight. Now my Crazybee F4 Pro V2 will still power up, but I don't get the 4 beeps at the end, like I used to. I can't spin up the motors in Betaflight, and even though it's still bound, and my QX7 shows it's bound with switches all working. Can't get motors to spin. Fragile boards! This my 3rd bad one. My Mobula7 HD burst into flames on 1st power up from the stock battery, 2nd FC simply wouldn't power on. This 3rd one actually flew for 2 meters! AMAZING! LOL I guess I should be happy?!!! 😩 🙄
So, do you think this board can be fixed? My guess is the ESC's are bad? Or?? ... If it can be fixed, how would I go about doing it?
Thanks so much for your time... I really love your channel! 😁👍
not sure but adding capacitor might help....check here www.banggood.com/Happymodel-XT30-Plug-Pigtail-Power-Wire-with-100F-Capacitor-for-Mobula7-HD-TRASHCAN-UR85-UR85HD-Crazybee-F3-F4-PRO-Flight-Controller-p-1476203.html?rmmds=search&cur_warehouse=CN
Hello, i have a mobula 7 flysky ready. Can i wire a Xm+ to bind it with my taranis ?
Yep.
I turn on the mobula 7 hd it works then I put the glasses on I look for the drone finds it but from the all gray screen can you help me?
很感謝你的影片，並且也訂閱了；最近購買了一台Mobula7 HD，拆解後才發現是V3的飛機控制版，我還是學你焊接了5V的降壓及穩壓器，希望對飛機有幫助。
感谢收看
Nick Burns(US), who received one of the the very first pre-productions from Banggood used and recommended 2S. And it flew forever. I have watched 4 reviewers videos, and 3S fries either the board or the esc from 1 day to, at most, few weeks.
The V2 version of the CrazyBee has very electrically noisy ESCs that produce large spikes on the power rails. Sometimes the ESCs fry but more often the 5V BEC can't cope with them and fries. The V3 version is much better and has upgraded ESCs and different BEC - 5V buck inverter.
I lifted the buzzer+ pad from the CrazyBee V2 board. Could there be any alternative for buzzer connection on this board?
It's easily done if you hold the soldering iron on the pad for too long, I recommend not just relying on the flux in the solder. Use some separate flux like Amtech. You'll need to dig around with a multimeter to try and find other buzzer connections on the PCB. There's no schematics around so it'll be a voyage of discovery.
@@WhirlyBloke Yea, thank You WB. It was not so easy with the conformal coating i applied on te board :) Therefore i asked the question. I received another quad with this board in the meantime, and was able to fix it - there are 2 or 3 alternative points. But strangely i found no alternative for the buzzer-
@@tomh4618 Let me know if you find out.
@@WhirlyBloke I fixed my problem with buzzer+ pad. But if i had this problem with buzzer-, i would not be able to fix it. (That was a remark only, it surprised me i found no alternative for buzzer- on the board.) I really appreciate Your support and knowledge!
@@tomh4618 NP
Hi mate, Thumbs up, Great info, much appreciated. Cheers.
Is there a pad to solder the fourth wire (for rssi) on an rxsr. Thx
Nope.
Thanks a lot for these awesome Video. There is much to learn from you :)
Which Video explains the problem with the XM+ ? I didn't saw the Link. I have the same problem to bind my rc with the XM+. I did bind on SBUS and set everything. Now when i start i have a huge delay on the control. Also i have the question what the AUX 12 deflections are in Betaflight after binding with the XM+ on one of your videos?
I'm new with quad's so there is a hole to fill with knowledge :D Hope you can help here :)
Smartaudio vtx now at tx1, can i move to tx2 after install xm+ receiver, because i cant enable vtx smartaudio after install signal wore from xm+ to irx1, ??
Just check you use an inverted UART for your XM+ SBUS.
Did you have to move your smart audio to tx2?
Hi! Just saw this video and noticed that you had RSSI working. I have a FlySky FS-i6 flashed with a modded firmware that allows it, among other things, to receive rssi information. That being said, I don't see any activity in the Receiver tab in Betaflight. Could it be because of the FlySky version? Did you have any problem setting it up? I'm not an expert and this is my first drone, so there's a real chance that I missed some step that was key to enabling RSSI.
Thanks for any help you might provide. You won a subscriber :)
I don't use FlySky so I can't really help, but have a browse around youtube - I'm sure there's an answer somewhere.
@@WhirlyBloke thanks! I'll keep looking around. I'm bound to find something someday!
hye i have buy fc crazybee f4 mobula 7 from my friends when i connect the usb the fc suddenly smoked. does fc already broke down can i know what the problem
Sounds bad. If it's smoked it's probably the 5V BEC. The V2 version of the CrazyBee is very fragile and it;'s a common problem. If you're going to replace it, I'd recommend the V3 version which has been sorted.
Whirly Bloke so basically i cannot fix it anymore right 😭
Hi when I connect power to my mobula 7 I get some
Smoke smell. I disconnected the power then since then I don’t get the fpv feed and nothing happens
Hi!
Do you know if I can put an XSR receiver to the mobul 7 hd? and use with 2s battery?
Thanks and sorry for my English.
Should be fine.
hi, once the buzzer is connected, how is it activated by radio control? I'm a novice and I don't understand much
thanks
Set up the switch you want to use on your transmitter and then use Betaflight Configurator to assign it to the buzzer. Follow this through to see how it's done. th-cam.com/video/OWOPFgk8SyE/w-d-xo.html
thanks youuuuu
Wow thanks for this! Great indepth understanding of electronics
Fantastic video mate. How do you rate this micro? In the market for an HD whoop but there are so many. How's the jello?
Thanks
The Mobula7 HD is very good but the CrazyBee F4 is a bit fragile. iFlight CineBee is more solid but suffers a bit of jello. Easily fixed with soft mounting and ND filters.
@@WhirlyBloke Thanks for your reply. I thought the iflight had less jello but it's a lot heavier. I'm seriously considering that Mobula HD.
First off I'd like to thank you for this video! It's the only one I've seen with such great detail on the why the where and the what so thank you!I've had my mobula7 HD and it still runs perfect. I'd like to install the regulator before I burn it up. Should I also add a capacitor and if so should it be I stalled on the xt30 lead or after the regulator?
Put it on the battery wires connected on the board if you can.
would this be the same process to add a crossfire nano receiver?
Yes, but make sure you connect the CrossFire receiver to the RX1 No Inverter pad, not the IRX1 pad I did for the XM+. Remember, CrossFire uses non inverted serial signals.
Whirly Bloke brilliant. Thanks. Appreciate the reply.
@@andijones1985 Hi did you ever get this going? I'm now trying to get crossfire setup on my mobula7. tks!
You sir are a champion, thank you very much for this useful video
hi WB i having a problem with my MOBULA 7 with FLYSKY FX-I6X binging so it can bind but in 2/3 second it will disconnecting. why is that happen . Plz
Sounds weird, but the on board RX is awful. Us an external RX.
I've had 2 go bad. No wet grass. I think load is to high, and over time they burn up.
The onboard boost converter gets too hot and dies.
@@WhirlyBloke hopefully the new geprc aio is better.
I bent my 1mm motor shafts.. still flys.. I just bent it back straight as possible.
Any help is helpful
Extremely useful,thank you !!
Well done mate! I wish I had attended some electronics classes back in the days ;)
And of course, big up for the Blade Runner poster (The real one!)
Thanks for watching.
Was scared I'd gotten a counterfeit when my FC board looked different from yours, but apparently they're now shipping this quad with the CrazyBee v3 which has a completely different pinout. It's item ID # 1534753 on BangGood if you want to put that in the description or something.
Anyways, thanks for the concise and informative video. Was just looking for where to solder my XM+ to (ironically I couldn't get that from this video) and hadn't even considered adding a buzzer or adding a conformal coating to the bottom of the FC. Now instead of just more range I've got a pretty upgraded quad.
Have you messed with the tune at all or are you happy with the stock PIDs?
Thanks for watching. Yep, suppliers do change things so your have to double check. I've just used the stock PIDs for now.
@@WhirlyBloke Any interest in a 3D printed guard to keep your wires from potentially getting caught up in the motors? I'd have no problem sending you one as a thanks for the helpful video.
@@TheSolongsidekick That's a kind offer but I'll pass - I'm a bit to busy at the moment. If you've got a link to the STL file, I'll add a link to it.
@@WhirlyBloke There are a couple options. Item # 3540289 on Thingiverse is the most minimalist, and item # 3545468 is another great option.
Very helpful and informative thanks for posting
Thanks for watching and the feedback.
haha I can't believe you fit all that crap in there... I've been wanting to upgrade my mobula receiver due to intermittent failsafes, but i was worried about fitment. Now i see it is possible, thank you
It's a bit tight and take care with the soldering - use plenty of flux.
Great vid, tnx!
I have build in now a new receiver and every thing is fine now, the original DSMX RX was not able to work in my mobular7.
Thats trouble shooting work at its best......... ;-)
The built in RX is awful.
Great info ❤️ you really know tons of things about your hobby. I wish i can be good as you in time 😘 cheers
Thanks for watching.
My 7hd caught fire on 3s . Contacted happy model they asked me to send it back for a fix. Still waiting for it to be returned.
Not good
Used this method to fix my trashcan75. Seems to be a pretty common problem.
Pesky CrazyBee boards.
that was brilliant. thank you..
Great vid, thanks!
Glad you liked it!
Thanks for sharing...good too know
very useful tips even if i don't have the mobula 7 hd.
Thanks for watching.
@@WhirlyBloke I've just subscribe to your channel. And love the content.
@@grabejud It's a bit quiet at the moment for various reasons, but new content is on the way.
"Powered by Tea and Biscuits" - 😍 That alone got me to subscribe. Hilarious. Keep up the good work. 👍👍
Thanks for watching and the feedback.
Thanks this helps
Suuuper!
Funny, mine is doing the opposite. Power only via battery.
Expected a stop motion movie LOL
I did think about it.
Excellent info, I 've just installed a xm receiver, works perfect. The mod does stop smart audio feature from working, I followed another helpful video I used a while back on another build to fix the issue, th-cam.com/video/TaCD_oa-XBk/w-d-xo.html just be aware the resource ID will obviously be different on the CBF4 board and you wont find the transponder entry either. Thanks again for the info WB. :-)
Hi, did you managed to get smartaudio working yet? Troubles with the correct resource procedure for softserial. Could you please explain it?
@@dcclark01 Hi mate, wow that was a while ago, I just dung this video up, it maybe of help, it helped me...th-cam.com/video/TaCD_oa-XBk/w-d-xo.html
@@dcclark01 ahhh ok i've already listed that video :-( ok i will have a think about it and come back to you, if ofcourse you have not already found a solution?