That’s one of the best step by step guides I’ve seen anyone make. The attention to detail with the auto air valve shows how thoroughly you do your job. We’ll done
Living in Cornwall it’s was becoming difficult to find someone to fix my boiler. Following this video enabled me to do the job myself. Fantastic video, Thank you so much.
Waseem I must tell you this: THANK YOU, THANK YOU THANK YOU VERY VERY MUCH!!! This video has been the difference between a frutrating dripping Vaillant boiler, and a successful fixing operation! I have a Vaillant EcoBlock 236 boiler and, even if it is not the same model in your video, your instructions are so precise that I was able to fix it with the same smooth mood you have in your video! Thank you again for this! I've also clean the AAV as you wisely suggest! About the AAV I would add the following small advice: don't worry if the small spring get off the pin while washing - just keep on cleaning carefully, then reassemble the two pieces by twisting the spring onto the thread on the pin. I got scared when they separated while washing, I didn't expected that, and I was afraid not to have spare parts around, being Sunday! Well, at the end everything seems running correctly! Great video and great feeling! Greetings and Ciao! from Italy
Thank you so much! Your video was incredibly detailed and made the process of changing the diverter valve on my Vaillant Ecotec Plus 837 so easy to follow. I couldn't have done it without your step-by-step guidance. Truly appreciate your effort and the clear explanations!
Hi Wasim My name is Suri. I m from London. I m 54 years old studying to be a Gas Safety Engineer. I m in the process of making job portpolio. I saw your video on changing valliant diverter valve. I m very much pleased the way u explained in very simplistic way. I was a great help. May Allah bless u and ur family all the time. Regards
Absolutely awesome! Really excellent well described guide that didn't rush through the job. Without this video I'm not sure I would have been brave enough to tackle it. You've saved me a fortune, thank you!! 👍
This Video saved me a FORTUNE!! I have exactly the same boiler (even the same toolkit!) and this video was spot on!! - I didn't bother servicing that last part, as I was too excited to see if it fixed my issue, but I plan to go back and do that tomorrow. Thankyou so much!
Mate you saved me a few hundred quid! I did get a bit wet by not putting the pipe in far enough but this was an amazingly detailed and helpful video. Thanks mate
Very informative video mate I’ve got my first diverter valve on a Vaillant to change tomorrow and I feel a lot more confident about it thanks to you. One thing I would say is it might be worth stating that you must be gas safe registered to take the case off a gas boiler as there are a few guys in the comments who clearly aren’t and have carried this job out.
I found your videos very helpful. I’m done now with my practicals waiting for boiler installations. Nice one brother. Masha Allah you are good in your job. Wish you more success.
just followed your instruction , everything worked great .good tip about the auto air valve it needed cleaning .I would recomend putting the plug in the sink when cleaning small items as they have a bad habit of going down the trap . your instruction was clear and to the point no time wasted on waffle also good video of everything relevant to the job . 5 stars all the way
Fantastic. Really appreciate people like you, helping others with your knowledge and experience. I do the same, only I do it with apprentices, so I can pass my knowledge onto them, that means they will become competent skilled workers, who can then complete the circle and, help others.
I hope you see this, my elderly relative was quoted over £275 for this job. I saw this and did it for her it cost me £80. I am not a plumber in any way or shape or form. Thank you sooooo much for this you have helped out more than you could know. Thank you again.
Fantastic step by step guide - thank you for doing it and uploading, as this enabled me to change the diverter valve on my valiant boiler and solved the problem where the radiators kept coming in when the hot water was not running. Awesome work..!!
very detail explanation. unlike other engineers video which show less detail, this is every step well explain video, love it, would b looking at more of ur videos... thank you
I have never seen anyone like this brother given details on plumbing and gas on TH-cam or any public accedemic relating to this profession. May Allah reward more br. In sha Allah. Meanwhile, I love to meet u br.if u are in London pls. Stay blessed.
Pity you don’t live in Sheffield I’d give you a job , good video mate like the way you clean auto air vent when boilers drained. I always clean pressure sensor as well , top man keep up the good work. Good to see top engineers in the industry 👍👍
Thanks very much i really appreciate the time and effort you have put in on this video your welcome to call round for a tea and chocolate biscuits thanks much appreciated 😊👌👍
Thanks for the excellent video. Changed the diverter valve and house is warm again. I really appreciated the little extra - cleaning the automatic air vent. That was a nice touch. I struggled to get the valve reconnected to the pump with the new O-ring, even with it lubricated with soap and water. How did you do it so effortlessly? Never mind, I got there in the end. Cheers!
This is brilliant thank you, a question, my hot water display goes above the recommended temperature 71c but goes up to 77 even hotter when drawing dhw, suggestion please
I have been watching your videos, very well explained, specially for beginners like me is very useful, you are basically filling the gap I think, there are lots of similar videos on TH-cam but you have tried to clarify it targeting beginners, thank you very much, from your videos I am 100% sure that your first priority is to help new guys, thank you very much taking time to do this. I got some request for you for future videos. 1. When you install new boiler can closely and in detail explain about flue installation referring to the Manufacturer Instructions, l know you have done briefly before, but please expand it bit more. 2. Can you also explain what short of screws you use for different types of walls, like for plaster board, brick wall etc, bit of explanation. 3. Can you please do video now and then answering people's questions, if you do this please make a short video so that we can send questions on the comment section. Thank you very much.
Hey, great looking video, my Vaillant 838 pressure has been going up about a bar a day now for a week, was beginning to think about what to do with it... being a slightly less qualified plumber - eg, not gas registered - I generally stayed away from opening a boiler up, but seeing this video, I think I owe it to myself.... and wife for Xmas pressies!! to try repressurising the vessel first, looks pretty straight forward, and not touching any gas components. A job for Friday afternoon... I'll be watching this video a few times more before then! Thanks for the help!
Great video guys, very informative, the diverter valve is leaking on my Valiant boiler and you've given me the courage to attempt to change it, been quoted £500 so hopefully some money saved..
Salaam bro, I've started watching your videos for a week now and so impressed. Could you possibly make a video of all the tools you have and where we can buy them from? For someone new in the industry will help them a lot. Really like your ratchet spanner to get into tight spaces 👌
@@rayc1503 Turns out diverter cartridge needed replacing & diverter valve motor wasn't retracting backwards & forwards & was replaced. £30 fix in total. So after being turned to run boiler into ground & just isolate heating side with screwdriver by heating engineer. Heater exchanger was clean as a whistle. Engineer made me pay for a heater exchanger in advance which was not even needed.
@@PlumbingDoctors brother slaam, preciate the videos, very good videos keep em coming, can you please include pricing on what you charge for the jobs your doing for us newbies, much preciated, Allah bless ameen
@@PlumbingDoctors we got less copper used as material of pipes. Only if you are rich enough 😁. Most of the systems are made with polypropylene. And most of the boilers are non condens. It's because of price and lack of good engineers outside Moscow and Saint-Petersburg. Also green ideas are not shared by the customers and the government so there are still some people who respect and choose those big floor-standing cast iron boiler.
Great detail and a job well done. I have a Vaillant Eco tec plus 637 that needs an intrusive service and its heating the rads but not the hot water. ( egg timer shows in the display), so hopefully the guy is a competent as you when he calls.
How much would this job normally cost roughly? I've got this boiler where the radiator is heating up even though thermostat temperature has been reached. I suspect its the motorised or diverter valve.
Yep most people overlook the AAV's but its good practice to give them a good clean 👍🏻.. I did not ask the customer about the radiator but i think its used to dry clothes.. great idea on my opinion 👌
Great video thanks for the upload. I’ve got a VAILLANT Ecotec plus 837 R1 the radiators are coming on by themselves and I did change the diverter valve last year. Is it the same problem again? … any help will be appreciated. 🙏🏽
The plastic diverter valves had failed twice in the last two years on my Vaillant Ecotec Pro 28, which was installed in August 2013. It is a known recurrent problem with the plastic DVs so this time replaced with the more durable brass one.
That’s one of the best step by step guides I’ve seen anyone make. The attention to detail with the auto air valve shows how thoroughly you do your job. We’ll done
Thanks 👍🏽👍🏽
Living in Cornwall it’s was becoming difficult to find someone to fix my boiler.
Following this video enabled me to do the job myself. Fantastic video, Thank you so much.
Fantastic!
Iv being a heating engineer for over 20 years..I like ur style. Direct and to the point....Nice one
Thanks everyday is a school day
Waseem I must tell you this: THANK YOU, THANK YOU THANK YOU VERY VERY MUCH!!! This video has been the difference between a frutrating dripping Vaillant boiler, and a successful fixing operation! I have a Vaillant EcoBlock 236 boiler and, even if it is not the same model in your video, your instructions are so precise that I was able to fix it with the same smooth mood you have in your video! Thank you again for this!
I've also clean the AAV as you wisely suggest!
About the AAV I would add the following small advice: don't worry if the small spring get off the pin while washing - just keep on cleaning carefully, then reassemble the two pieces by twisting the spring onto the thread on the pin. I got scared when they separated while washing, I didn't expected that, and I was afraid not to have spare parts around, being Sunday!
Well, at the end everything seems running correctly! Great video and great feeling! Greetings and Ciao! from Italy
Thanks for the feedback and advice!!
Thanks for the step by step guide ,i needed urgent fit , sick of begging gas engineers
No problem 👍
Thank you so much! Your video was incredibly detailed and made the process of changing the diverter valve on my Vaillant Ecotec Plus 837 so easy to follow. I couldn't have done it without your step-by-step guidance. Truly appreciate your effort and the clear explanations!
You're welcome!
I've done this today! I'd have been lost without your video. I swore much more than you and got fairly damp along the way too but job done!
Glad I could help!
Keep up the good work , ur saving the nation some real money, in these hard times with ur insider videos A********
That's one fantastic tutorial. Without your guidnace I wouldn't have been able to attempt it. Bravo !
Great to hear!
Hi
Wasim
My name is Suri. I m from London. I m 54 years old studying to be a Gas Safety Engineer. I m in the process of making job portpolio.
I saw your video on changing valliant diverter valve. I m very much pleased the way u explained in very simplistic way. I was a great help.
May Allah bless u and ur family all the time.
Regards
Thanks brother 👍🏻 JazakAllah khair
please keep posting, your vids are a real go to on what to expect with installs and services, I'm tired of being stuck with the cowboys
thanks bro
Absolutely awesome! Really excellent well described guide that didn't rush through the job. Without this video I'm not sure I would have been brave enough to tackle it. You've saved me a fortune, thank you!! 👍
👍🏽
Great video. Bought back memories. Retired in 2019. Did many of these. Those two surface o rings at the back were always a worry.
Thanks for watching!
Thank you most profoundly. Your video is very detailed, straight to the point. This video saved me in an emergency situation. Thank you once again!
💯
This Video saved me a FORTUNE!! I have exactly the same boiler (even the same toolkit!) and this video was spot on!! - I didn't bother servicing that last part, as I was too excited to see if it fixed my issue, but I plan to go back and do that tomorrow. Thankyou so much!
Glad it helped! 👍🏽
Mate you saved me a few hundred quid! I did get a bit wet by not putting the pipe in far enough but this was an amazingly detailed and helpful video. Thanks mate
Glad I could help
Proper video still I’m a phase 2 gas/plumber apprentice and we change these quite often so it was good to get a nice detailed video 👍🏾👍🏾
Thanks 👍
Very informative video mate I’ve got my first diverter valve on a Vaillant to change tomorrow and I feel a lot more confident about it thanks to you. One thing I would say is it might be worth stating that you must be gas safe registered to take the case off a gas boiler as there are a few guys in the comments who clearly aren’t and have carried this job out.
👍👍 most wont listen anyway
Thank you for all details. I noticed other people do not show all the details.
👍🏻
I found your videos very helpful. I’m done now with my practicals waiting for boiler installations.
Nice one brother. Masha Allah you are good in your job. Wish you more success.
JazakAllah khair
Excellent video, re content and pace this is how a TH-cam tutorial should be made
Much appreciated!
Thank you so much. Hot water restored on daughter's birthday!
just followed your instruction , everything worked great .good tip about the auto air valve it needed cleaning .I would recomend putting the plug in the sink when cleaning small items as they have a bad habit of going down the trap . your instruction was clear and to the point no time wasted on waffle also good video of everything relevant to the job . 5 stars all the way
Thanks for the detailed feedback mate and yes good tip about the plug 👍🏻
Masha'Allah great depth and detail step by step video Jazaka'Allah Khairan.
JakazAllah khair thanks bro
Fantastic. Really appreciate people like you, helping others with your knowledge and experience. I do the same, only I do it with apprentices, so I can pass my knowledge onto them, that means they will become competent skilled workers, who can then complete the circle and, help others.
Much appreciated
I hope you see this, my elderly relative was quoted over £275 for this job. I saw this and did it for her it cost me £80. I am not a plumber in any way or shape or form. Thank you sooooo much for this you have helped out more than you could know. Thank you again.
❤
Hi thanks for the great step by step guide just fitted one and working great you made it easy for me thanks again saved me loads of money. Great job.
No problem 👍
Excellent step by step guide to a repair, well done you keep up the good work
👍🏽
What an easy video to follow, first time replacing one of these and was so easy once I followed your guide. 👍🏻
👍🏽
Fantastic step by step guide - thank you for doing it and uploading, as this enabled me to change the diverter valve on my valiant boiler and solved the problem where the radiators kept coming in when the hot water was not running. Awesome work..!!
very detail explanation. unlike other engineers video which show less detail, this is every step well explain video, love it, would b looking at more of ur videos... thank you
I have never seen anyone like this brother given details on plumbing and gas on TH-cam or any public accedemic relating to this profession. May Allah reward more br. In sha Allah. Meanwhile, I love to meet u br.if u are in London pls. Stay blessed.
JazakAllah khair bro
Pity you don’t live in Sheffield I’d give you a job , good video mate like the way you clean auto air vent when boilers drained. I always clean pressure sensor as well , top man keep up the good work. Good to see top engineers in the industry 👍👍
yep good tip about the pressor sensor
Man still such a helpful video, appreciate it 🙏
No worries!
what a tutorial. !! Well explained, well filmed and well done.. Great Help......Thanks a million.
👍👍
Video iz very informative..... it will help to make my portfolio.... JazakAllah Doctor Sahab
wa iyaak
That's Very very Professional.. Brilliant stuff.. Well done Body.
Thanks
Thanks very much i really appreciate the time and effort you have put in on this video your welcome to call round for a tea and chocolate biscuits thanks much appreciated 😊👌👍
👍🏽👍🏽
Brilliant presentation thanks for showing me the way of it👍
No problem 👍
Thank u for showing how to change it mine is leaking been ask 250 to change it what a joke thanks for making life easy for people 😊
Hi mate. I just done mine this morning. Did you need to bleed your radiators.
U r awesome, first guy ever seen wo gives brief details about maintenance, thanks a lot don't have more words but plz keep it up more videos.
Thanks 👍🏻👍🏻
Excellent. Good job with a step by step detail. Very good for new Gas Safe Engineers like me.
Muy muy bien hermano. Gracias.(Spanish).
You are the man. Brilliant guide and very well done 10/10
Thanks i appreciate the love
@@PlumbingDoctors Which Wera ratchet is it you use?
You get it in the wera maintenance kit
Well done, did me a right favour. Saved me a few quid. Thanks
💯
Thanks for the excellent video. Changed the diverter valve and house is warm again. I really appreciated the little extra - cleaning the automatic air vent. That was a nice touch.
I struggled to get the valve reconnected to the pump with the new O-ring, even with it lubricated with soap and water. How did you do it so effortlessly? Never mind, I got there in the end.
Cheers!
Make sure you have slackened the screw which holds the pump to the body of the boiler. So the pump has a bit of play
Bro... 1st engineer I know to give love to the aav.
Keep up the good work👍🏾
This is brilliant thank you, a question, my hot water display goes above the recommended temperature 71c but goes up to 77 even hotter when drawing dhw, suggestion please
Is your boiler hitting temp then going off. Cooling and firing again (cycling)?
@@rayc1503 eventually yes it goes off and fires back up if I'm not mistaken I shall look tomorrow and double check.
thats normal as the temp you see on the display is not the same as what you set
@@PlumbingDoctors Thank you so much for getting back to me, you've been more than helpful.
Excellent tutorial . Well explained, handy tips added in. Brilliant stuff. Many thanks for this.
Very nice usefully video
Fantastic video 👍👍.....got to do this job next week on a protec 28 .....great top tips 😁😁
Hello
U done the work very nicely and very accurate
👍🏽
Great tip about the air valve very clean instruction , Thank you so much cool video.
Thanks
superb video thank you, took your time to explain everything fully.
Thanks mate great explanations i'm really enjoy to watch it 👍
Waseem
Very good tutorial , do you mind to let me know how to get hold by name that very useful tool kit?
Thanks
Brilliant detailed video! Do you have any tutorials as how to diagnose a faulty PCB on valiants pls
check my tiktok
I have been watching your videos, very well explained, specially for beginners like me is very useful, you are basically filling the gap I think, there are lots of similar videos on TH-cam but you have tried to clarify it targeting beginners, thank you very much, from your videos I am 100% sure that your first priority is to help new guys, thank you very much taking time to do this. I got some request for you for future videos.
1. When you install new boiler can closely and in detail explain about flue installation referring to the Manufacturer Instructions, l know you have done briefly before, but please expand it bit more.
2. Can you also explain what short of screws you use for different types of walls, like for plaster board, brick wall etc, bit of explanation.
3. Can you please do video now and then answering people's questions, if you do this please make a short video so that we can send questions on the comment section.
Thank you very much.
Wow thanks for the recommendations and i will take this on board!
Hey, great looking video, my Vaillant 838 pressure has been going up about a bar a day now for a week, was beginning to think about what to do with it... being a slightly less qualified plumber - eg, not gas registered - I generally stayed away from opening a boiler up, but seeing this video, I think I owe it to myself.... and wife for Xmas pressies!! to try repressurising the vessel first, looks pretty straight forward, and not touching any gas components. A job for Friday afternoon... I'll be watching this video a few times more before then! Thanks for the help!
i'm not saying you shouldn't, but technically you're not supposed to take the cover off the boiler because it is a room sealed appliance.
Great video guys, very informative, the diverter valve is leaking on my Valiant boiler and you've given me the courage to attempt to change it, been quoted £500 so hopefully some money saved..
If your not Gas Safe Registered then its illegal to remove the front cover off the boiler...
@@PlumbingDoctors duly noted!
Hi Thank you for your information . could you please kindley send the link to buy a set tools ?
amzn.to/3RElsKV
Great video mate, very informative. I have a little question, when they fail do you find they'll usually fail in with CH open or HW open? Thanks again
Im loking your video and fix new boiler thankfully video
Great video mate, just training as gas safe, will be watching your videos for your great detailed instruction.
👍🏼
Salaam bro, I've started watching your videos for a week now and so impressed. Could you possibly make a video of all the tools you have and where we can buy them from? For someone new in the industry will help them a lot. Really like your ratchet spanner to get into tight spaces 👌
Wslaam bro - Insha'Allah
That was a very accurate video bro. Enjoyed it a lot. ❤
Hi had diverter valve changed no leaks. Water still Luke warm. Could the diverter motor need replacing. Thanks in advance.
Plate heat exchanger or it could just need the canoe filter cleaned or replaced (sometimes it comes out in broken pieces).
@@rayc1503 Turns out diverter cartridge needed replacing & diverter valve motor wasn't retracting backwards & forwards & was replaced. £30 fix in total. So after being turned to run boiler into ground & just isolate heating side with screwdriver by heating engineer. Heater exchanger was clean as a whistle. Engineer made me pay for a heater exchanger in advance which was not even needed.
Thank you for taking the time to make a very clear comprehensive instructional video. Good Luck to you.
Thanks for the feedback 👍🏻
@@PlumbingDoctors brother slaam, preciate the videos, very good videos keep em coming, can you please include pricing on what you charge for the jobs your doing for us newbies, much preciated, Allah bless ameen
Thx for the video, it's interesting to watch someone who does the same work but on the other side of the planet :P
Where you from?
@@PlumbingDoctors Saint-Petersburg, Russia
Oh nice... is there much difference in the plumbing?
@@PlumbingDoctors we got less copper used as material of pipes. Only if you are rich enough 😁. Most of the systems are made with polypropylene. And most of the boilers are non condens. It's because of price and lack of good engineers outside Moscow and Saint-Petersburg. Also green ideas are not shared by the customers and the government so there are still some people who respect and choose those big floor-standing cast iron boiler.
Belting video, cheers ❤👌👍👍
Thank you 👍
Good job , explained in detail
Thanks mate you made that look easy
Great detail and a job well done. I have a Vaillant Eco tec plus 637 that needs an intrusive service and its heating the rads but not the hot water. ( egg timer shows in the display), so hopefully the guy is a competent as you when he calls.
Excellent video, thanks!
👍🏽
What is the ratchet you use and what bits for isolating boiler f&r and cold feed, can you put a link on possibly?
Great work 👍🏼
Wera 135926 Kraftform Kompakt W1 Maintenance Kit www.amazon.co.uk/dp/B00TJ3J81Q/ref=cm_sw_r_apan_glt_i_QE7SJYMZ1FAZNHY6T36C
Awesome video mate
Very well explained 👍
👍🏼
Brilliant video mate! keep them coming 👍
Thanks
Nicely done fella
Great video, well done.
Nice, got one to do tomorrow 👍
Hope you enjoy it!
allah aapko khush rakkhe bhai
Ameen
Absolutely brilliant video bro. In detail plus excellent tips. Keep it up. Helped me alot.
From Wembley, London 😀
Thanks bro
How much would this job normally cost roughly? I've got this boiler where the radiator is heating up even though thermostat temperature has been reached. I suspect its the motorised or diverter valve.
Well done brother u don't need to isolate the cold feed into the boiler.
Yes, you are right
Very detailed information thanks
My pleasure
Brilliant video
Thank you for this!
My pleasure!
Brilliant video thanks 🙏
Very welcome
You are a star thank you for sharing👍👍
💯
Very good explain👍👍👍
Thanks
Wow, exceptional video. Excellent workmanship and brilliant guidance... thank you...iv subscribed...
Mashala...
Alhumdulilah 👍🏼
Great vid. AAV's don't get enough love on a service 👌. Interesting place for a radiator, I'm guessing to dry clothes and towels?
Yep most people overlook the AAV's but its good practice to give them a good clean 👍🏻..
I did not ask the customer about the radiator but i think its used to dry clothes.. great idea on my opinion 👌
Assalamualikum Very nice explain Thanks
Thank you so much for this video! Uno dos tres quatro!
You got it!
I like your style on the videos, nice and down to earth.
Thanks mate.. best to be yourself 😉.. I appreciate the feedback
Great video thanks for the upload. I’ve got a VAILLANT Ecotec plus 837 R1 the radiators are coming on by themselves and I did change the diverter valve last year. Is it the same problem again? … any help will be appreciated. 🙏🏽
Could be other issues
Great video Bro i have ordered my Diverter for my 832 thank you so much keep the good work up Ian.
Very good video buddy, followed you and was a breeze 👍. Very easy to follow steps and very detailed
👍🏻👍🏻
Greetings! The display from 242/3-5 can be put on Vaillant 242/3-3??
No idea sorry
@@PlumbingDoctors Thanks
Great video bruv. A bit of tip: apply a bit of LSX to tip of your screwdriver. That will assist you in putting back the bottom screw on diverter valve
I tried that in the video but it failed and cut it out lol 😆
If you have a magnet ,rub your screwdriver against it and try 😉
The plastic diverter valves had failed twice in the last two years on my Vaillant Ecotec Pro 28, which was installed in August 2013. It is a known recurrent problem with the plastic DVs so this time replaced with the more durable brass one.
✅