You are now my FAVORITE Channel. You actually showed the ENTIRE (in real time) how to calibrate AND what you will sell on the phone screen as it is "Callibrating"!!! TY TY--- 5 STARS!!! Everyone else just says click the calibrate button & then go on to another adjustment ...grrr
Very nice! I went on a Mavic Mini outing and came home unable to fly because I couldn't figure this out. Who'd think you'd have to stand the Mini up on its hind end? Ho ho. Now it's sooo easy. Thanks! Rich
Thank you so much for making this video because I didn’t know why my calibration was stuck at 95% now I can fix it, I liked this video and subscribed to you
Thanks for sharing. i purchased a refurbished DGI Mini 3 Pro recently. it works just fine. my only issue is that i have to calibrate it before every flight. This is very annoying as it take a little time to do so.... How can i correct this issue?
Hey Dylan, I have a question for you, got my mini 2 last week for christmas, and had it outside the other nite just playing with it in front of my house in the dark and noticed when im landing it, its showing - 2.5 ft when its hovering at about 1.3m above my driveway. Seems like its ok at higher altitudes but its hard to tell when its showing a height of 100 ft if its actually 100 feet in altitude when your standing right below looking straight up. Have tried calibrating the compass and imu twice already, but it still shows negative 2.5 to 3 foot when its hovering at your waistline and im 5 foot 11 inches tall, still flys allright, just annoying knowing it should not be that far out of calibration, any advice would be appreciated, thank you... Dave R PS, it also shows 0 height as soon as it touches down which is correct once it lands.
how to fix "ekf2 imu0 ground mag anomaly, yaw re-aligned" and "potential thrust loss". our flight controller is Hex Cube Black - PX4. we used herelink for controlling and also compass and ESC calibration done on mission planner.
hi i need help with my dji mini 3, it won’t able to rotate the propeller, even if i start it there’s no sound like it was being ready or connected, and i cannot calibrate the IMU i keep on pressing the start button to calibrate but won’t able to
Can I calibrate my Mini with any other app other than the DJI Fly? My phone does not support the DJI Fly but does support Litchi and DroneLink. Can IMU be calibrated from Controller or some other way?
IMU setting can be reset to default once you change battery. Evidence for this is when you set it up for first time, It will be 0 to 95% before you start to move drone to sides and top for full calibration, If you redo IMU it will be set at 95% and only top and sides will be re done, Now if you remove battery and put a another one in and the IMU will be back to 0% when you start it and redo the full calibration.
When laying it on both sides for IMU calibration, my mavic mini lays flat and parallel to the table on one side, and slightly angled to the table on the other side. Is this normal? it's hard to tell from the video
My dji mini 2 isn't holding the position.....It falling to one side in the second and I'm not able to hold on to the postiom which it's shown ....What to do ? Please help ke with this....
Can anyone show me the best flying app for dji mini as I type in dji fly app about 12 pop up some only for photography and how to calabrate but dont know which fly app to download just got it yesterday and want to fly it any help would be appreciated thanks
Dumb question here but what's the purpose of calibrating the mini? Mine works fine and I haven't done this yet. My apologies as I'm a newbie and I know I probably sound like an idiot.
It's basically like he said "An oil change for your drone." It's a flying computer so you have to update it. If not, You might end up with a fly away or just having it drop out of the sky.
I have an Gimbal IMU Data Error 40021 after replacing the gimbal cam and ribbon cable due to a crash. Anybody know how to fix this? I know it is a compatiblity issue of some sort. It sucks that the cam is tilted to one side as a result of this error.
IMU stands for "Inertial Measurement Unit". IMU (inertial measurement unit) calibration is one of those things that is critical to keeping your drone straight and level. The IMU is a sensor that detects motion along a horizontal plane, as well as increases and decreases in altitude. -google
Lucky you all. Every time I tried to do the IMU calibration it takes like 10 minutes to get from 1% to 15% and then it crashes. $300 wasted just like that. Thanks for nothing DJI
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
You are now my FAVORITE Channel. You actually showed the ENTIRE (in real time) how to calibrate AND what you will sell on the phone screen as it is "Callibrating"!!! TY TY--- 5 STARS!!! Everyone else just says click the calibrate button & then go on to another adjustment ...grrr
Yup... I looked through a few different videos and found this 1 to be the most informative 👍👍
Thanks - I did not know about twisting the drone in the calibration
Just got mine in today! Pretty pumped to have an edc drone for social.
Very nice! I went on a Mavic Mini outing and came home unable to fly because I couldn't figure this out. Who'd think you'd have to stand the Mini up on its hind end? Ho ho. Now it's sooo easy. Thanks! Rich
Clear and effective. Thank you. I was lost and ready to throw it
Thanks for the video. My mini got to 95% and stopped. I wondered what was wrong. Should have had my glasses on, and watched your video first!
Thank you so much for making this video because I didn’t know why my calibration was stuck at 95% now I can fix it, I liked this video and subscribed to you
Mine is stuck at 10percent and want let me hit the start button..any help
Thanks for sharing. i purchased a refurbished DGI Mini 3 Pro recently. it works just fine. my only issue is that i have to calibrate it before every flight. This is very annoying as it take a little time to do so.... How can i correct this issue?
Nice bro I have solved my problem
Thx for your help 🙏
Thank you it’s exactly what I needed to know
Thanks 👍👍👍
nice turorial bro,very useful
Hey Dylan, I have a question for you, got my mini 2 last week for christmas, and had it outside the other nite just playing with it in front of my house in the dark and noticed when im landing it, its showing - 2.5 ft when its hovering at about 1.3m above my driveway. Seems like its ok at higher altitudes but its hard to tell when its showing a height of 100 ft if its actually 100 feet in altitude when your standing right below looking straight up. Have tried calibrating the compass and imu twice already, but it still shows negative 2.5 to 3 foot when its hovering at your waistline and im 5 foot 11 inches tall, still flys allright, just annoying knowing it should not be that far out of calibration, any advice would be appreciated, thank you... Dave R PS, it also shows 0 height as soon as it touches down which is correct once it lands.
Well explained Dylan!👍
how to fix "ekf2 imu0 ground mag anomaly, yaw re-aligned" and "potential thrust loss".
our flight controller is Hex Cube Black - PX4. we used herelink for controlling and also compass and ESC calibration done on mission planner.
Does it fix the drifting problem?
hi i need help with my dji mini 3, it won’t able to rotate the propeller, even if i start it there’s no sound like it was being ready or connected, and i cannot calibrate the IMU i keep on pressing the start button to calibrate but won’t able to
Yay! Thank you!
life saver
Mahalo!!
Haven’t used this in a while, forgot my password and had to sign up wife to use her mail. I started it up and it just flew into the walls !!
My Mavic mini keeps getting stuck at 95 percent ? Should I do it outside ?
Can I calibrate my Mini with any other app other than the DJI Fly? My phone does not support the DJI Fly but does support Litchi and DroneLink. Can IMU be calibrated from Controller or some other way?
I have a mavic pro I have been unable to calibrate the IMU continue to get error message check app please help me it is extremely frustrating
IMU setting can be reset to default once you change battery. Evidence for this is when you set it up for first time, It will be 0 to 95% before you start to move drone to sides and top for full calibration, If you redo IMU it will be set at 95% and only top and sides will be re done, Now if you remove battery and put a another one in and the IMU will be back to 0% when you start it and redo the full calibration.
When laying it on both sides for IMU calibration, my mavic mini lays flat and parallel to the table on one side, and slightly angled to the table on the other side. Is this normal? it's hard to tell from the video
Mine too
SAME HERE
My dji mini 2 isn't holding the position.....It falling to one side in the second and I'm not able to hold on to the postiom which it's shown ....What to do ? Please help ke with this....
Can anyone show me the best flying app for dji mini as I type in dji fly app about 12 pop up some only for photography and how to calabrate but dont know which fly app to download just got it yesterday and want to fly it any help would be appreciated thanks
Can you calibrate the imu indoors
Do you know how to fix gimbal lock
Can you do it indoors or do you have to do it outside?
Indoors or outdoors.
Dumb question here but what's the purpose of calibrating the mini? Mine works fine and I haven't done this yet. My apologies as I'm a newbie and I know I probably sound like an idiot.
It's basically like he said "An oil change for your drone." It's a flying computer so you have to update it. If not, You might end up with a fly away or just having it drop out of the sky.
Good job calibrating mine. No way
I have an Gimbal IMU Data Error 40021 after replacing the gimbal cam and ribbon cable due to a crash. Anybody know how to fix this? I know it is a compatiblity issue of some sort. It sucks that the cam is tilted to one side as a result of this error.
Chris LaFreniere im in the same boat
I got IMU error. What should I do?
Is the mini more techy than the big one?
SuperDave21 defintley more techy but get mavic mini since it’s new and available for more updates and e.x. But mini is good to idk
How often do i need to calibrate compass?
abysss56 compass usually when you move to another place just calibrate every 20 days
who else can't get the "start" button to work?
Did you manage to solve it?
@@j_souls_journey2928 yeah, just sent it in to dji for a new one.
Can IMU be calibrated indoor?
it can, but may be inacurate
what the f does IMU stand for?
IMU stands for "Inertial Measurement Unit". IMU (inertial measurement unit) calibration is one of those things that is critical to keeping your drone straight and level. The IMU is a sensor that detects motion along a horizontal plane, as well as increases and decreases in altitude. -google
@@harrychufitness Ha Thanks for getting back to me :) much appreciated.
Lucky you all. Every time I tried to do the IMU calibration it takes like 10 minutes to get from 1% to 15% and then it crashes. $300 wasted just like that. Thanks for nothing DJI
THE START BOTTON OF MY OWN DOES NOT RESPOND