✅ How to fix the "GIMBAL STUCK" error on drone

Vchannel - Chuyên trang review chi tiết Công nghệ, Trải nghiệm du lịch - Nhập khẩu trực tiếp, phân phối sỉ hàng công nghệ, giá lẻ luôn luôn tốt nhất thị trường
====================================
*NHÓM ZALO: zalo.me/g/ndvp...
====================================
Fanpage: / vchannel79
Admin: / han.ho7799
Hotline: [phone]
Email: [e-mail]
====================================
KÊNH BÁN HÀNG:
www.VchannelSt...
/ vchannel79
lzd.co/vchanne...
tiki.vn/cua-ha...
/ vchannelstore
======================================
Cám ơn các bạn đã luôn đồng hành và nhiệt tình ủng hộ Vchannel!
======================================
Playlist Review Thiết bị nhiếp ảnh và video: bit.ly/2FJFYZm
Playlist Sáng tạo - DIY: bit.ly/32wIo6s
Playlist Điện tử, IT, Hàng công nghệ & Xe: bit.ly/2H20l4p
Playlist Review Trải nghiệm Du lịch, giải trí: bit.ly/32yrLah
[English] High Tech - Camera, electronic, computer
playlist: bit.ly/2FAr3QZ
[English] Travel, Entertaiment playlist: bit.ly/2ZEw5TS
#gimbal #stuck #ket #solve #drone

[@seeyouinoc4408]

Was almost ready to send it back to DJI care refresh... and then I checked this video... used a small shop-vac... FIXED! Thank You!!!

[@ninomendoza627]

Thank u for sharing this video. I have the gimbal stuck error (code 40002) for a week now. Really giving me a headache and frustration and I even contact DJI support team and they instructed me to send my drone back to them. But definitely will do the these tricks u showed in ur video. Thanks again

[@Vchannel79]

Success to you. Thank you

[@casper2yall]

Thank you for doing this video cause I was about to burn my DJI.. I kept getting this message, I thought it was broken.. I will for sure give this a try before I use it as firewood..

[@Roadie40]

Thanks for the tips. Worked for me and eliminated my issue.

[@Vchannel79]

Congrats! Thanks for leaving your comment

[@ozone111]

Ooooh, you made my day. Thx! My drone crashed on the beach. Removed the sand using a bike pump. 😅

[@johnlylesalomon5065]

You just saved my life dude! Thank U for sharing this fix

[@openphoto]

Thanks for the content. I crashed my mini2 into the snow and got the gimbal stuck error. As i attempted to use a cool hair dryer to remove dust i noticed that the black plastic carrier that holds the gimbal has forks that were pushed sideways. The camera was impacting the case. I took a chopstick and pushed the entire gimbal assembly a bit to the right and it snapped back in place.

[@mcjaystar]

Same lol my camera was wonky the black thing inside was twisted so I pushed on it and it snapped back in pkace

[@ericinnz3249]

THanks for the tips mate, i saved my Mavic Mini, for now LOL

[@Vchannel79]

Congrats! Thanks for leaving your comment

[@RealJoshBinder]

This solved my issue, thank you!!

[@TnGuruAhmadRozainiUnitmedia]

thank you for your tips.. helped me a lots

[@sangeetgurung6157]

Thankyou brother
You save my drone I was taking to DJI care and then I saw your video Thankyou for this video
Loving from nepal

[@andisadler2897]

Mine started playing up a few days ago, just wouldnt calibrate. Watched this and voila, works fine and calibrated. Thanks.

[@Vchannel79]

Glad it helped

[@andisadler2897]

@@Vchannel79 Yes they are abit sensitive. You can knock the gimbal even removing the cover. Sometimes it helps by undo the screws for the body and blow into the drone itself.

[@sonoradron2582]

I have a mavic mini with the same problema, gimbal getting stuck, I have used air and applied graphite and improved a little, I´m thinking in applying oil but I'm afraid this will atract dust.
Thanks for your useful video.

[@Vchannel79]

Thanks for leaving your comment

[@jank1992]

Very informative video. It helped me. Thank you! :)

[@Vchannel79]

Thank you

[@presidentchaung]

Thank U So Much for the info. i did what you said use a blower it fixed my stuck problem

[@Vchannel79]

Thanks for leaving your comment

[@bubbles80882]

for others having this issue it could also be a ripped ribbon cable... it was for me. it would start up and run through the calibration sequence just fine but would say gimbal stuck... take the drone apart and inspect the ribbon cables...

[@beefman8322]

This worked for me, had to purchase another ribbon cable cause it was broken. Everything worked fine afterwards

[@YL06]

Hey man I crashed mine aswell and after trying everything I also noticed finally that my ribbon cable has ripped. How can I fix it? I don't live near any DJI stores so if I can somehow buy the ribbon cable and replace it myself would be good

[@YL06]

@@beefman8322 where did u purchase it? And was it easy to fix/replace

[@thomasngo9559]

@@YL06 google the part online and buy it

[@JoseSilva-rz6gf]

Great video man it really help me, save my drone thanks to you

[@Vchannel79]

Thank you

[@arun989]

Thanks for the Content.. Just Now I recovered my drone from beach sand....

[@Vchannel79]

Congratulate!

[@Hoofer001]

Thank you.worked great.

[@gabensontv]

You just saved me a headache sir. Thank you!

[@Vchannel79]

Thanks

[@Angelico_H]

Saved my life thank you

[@РусланАлексеев-б7и]

Hello I am from Russia. The video helped me a lot, they gave me a new drone, but the stabilization did not work right away. Thank you so much for showing what can be.

[@Vchannel79]

Thanks for leaving your comment. Success to you

[@michaeltreephotography]

Thanks, your solution worked on my Mini2

[@Vchannel79]

Congratulation, thank you

[@drayberph818]

Got mine fixed, thanks!

[@Vchannel79]

Thanks for leaving your comments

[@melankuat7139]

What method do you use to blow the dust away?

[@chigster3419]

Would it be fine if I would use silicone oil? I don’t want to take chances

[@Vchannel79]

Yes you can use it as well

[@Munite_man]

thank you for your video mate
saved my weekend

[@Vchannel79]

Congrats

[@trainrecked]

My gimbal on the mini 2 stopped responding to the (recenter gimbal ) option on control settings and allow upward gimbal movement..it just hangs down and is completely shaky image..Help..any clues? And I wonder if I am tapping the contro setting right..ugh

[@ngirittraveler]

Thx u very much for sharing👍👍👍

[@Vchannel79]

Thanks for leaving your comment

[@yakarithetraveler]

You saved my life bro❤️

[@rikikoes]

I will try this trick. Thanks

[@joeelmore151]

This is exactly what happened to mine today. Once I watched your video I checked and could feel that there’s dirt. Moving the gimbal by hand it still doesn’t level out on its own when tilted in one direction but I don’t feel the dirt

[@DiaPremiado]

Thank you so much 😭

[@maryannmiami]

Tip: Use a hairdryer and wiggle the gimbal. I don’t have a vacuum, but this just worked for me to clear the stuck gimbal problem!

[@thebuilders3350]

I have a problem gimbal stuck and the video is shaky, I don’t know what to do, any idea???

[@maurocomaroli7951]

thank you thank you thank you I solved the problem!!👍♥️👏👏🏅

[@AlyssaMalliae]

Thanks for the video! This worked!

[@forcedomkombat]

......I used 2.3 H Husqvarna gas powered leaf blover it helped me a lot...

[@rothdiyproject5681]

Thanks bro 😊

[@dreamrestore213]

ALWAYS hand launch and hand recover your drones.

[@seamamana9901]

Got it thank you I fix mine with same prob. There is sand inside gimbal motor. ❤

[@Dillixx]

Was working, now it's not. Tried everything on this video. I might just sell it. Had enough of my mini 2.

[@georgeghabour6707]

thank you man it's working now.

[@Vchannel79]

Thank you

[@prenumenume5212]

Useful, thx

[@Vchannel79]

Thanks for leaving your comment

[@johnward3641]

Great tip. Many Thanks. Subbed.

[@Vchannel79]

Congratulate, thank you

[@mrdhaliwal8228]

Thnks so much!

[@Vchannel79]

Thank you

[@vinzaputra]

Lesson learned, I'm the stupid newbie. Just get my drone 3 days ago, today I'm going for flight practice, get several take off and landing in sandy floor. Now my gimbal is a little not so loose in roll Axis (roll to te left bank) but the roll to the right is pretty loose.
I try to blow with hand blower, but I guess it's not so strong enough to blow the grain out. I'll try pressured blower tomorrow, I hope it can help me.
Man I was so afraid when I found the gimbal is not working up well suddenly after I change the battery 😅

[@weston6338]

Did you fix it?

[@vinzaputra]

@@weston6338 after blowing it out many times, at last I manage to get the fine grain out of the gimbal. But it took me a whole night working it out.

[@khanhnguyenduy1391]

@@weston6338

[@Tahnaiya]

Love the music.

[@javiarji8980]

Thanks, works for me.

[@Vchannel79]

Thank for leaving your comment

[@EternalSlayer]

Everytime i fly it gets Foggy inside the camera , any fix for that.....Thanks

[@Vchannel79]

Thanks for leaving your comment

[@dereckg4900]

That's odd. Have you tried anti fog spraying it?

[@nobelxer]

I fixed mine by using a pencil and moving the little plastic stabiliser in front of the insides of the drone

[@zebratagnomad2488]

Thank you

[@Vchannel79]

Thanks for leaving your comment

[@MrPongers]

Thanks for the movie. It works! :)

[@josephknapp24]

Mine continues to turn to the right any thing helps ?

[@uno9706]

Try to calibrate the gimbal. I tried it an hour ago and it fixed.

[@robl1967]

Mine moves when first starting but doesn’t work after that

[@Vchannel79]

You can try this method, if no thing change maybe you must change the 3 in 1 cable

[@robl1967]

@@Vchannel79 I mean the gimbal Doesn’t work after it first boots up

[@sinuemedina2550]

My camara doesn't move Al all. But is not stuck either!

[@MiguelLopez-wi5nm]

Just my mavic mini have that issue now. I will try the compressed air . Hope it works.otherwise i will have someone to repair it. I let you know man thanks.

[@jeangeclay]

Obrigado , consegui resolver o erro ,

[@100fit4]

muchas gracias eres un crack

[@Vchannel79]

Eres bienvenido. Éxito para ti

[@danielbarry2291]

Nice car

[@antmantony2642]

Thanks. It only takes a grain of sand. My Mavic Mini's gimbal become stuck after hitting the top edge of a chain link fence that has wooden privacy slats, then flipping over to the other side.
The right side gimbal joint shows evidence (scuffed) that it made contact during the crash. After watching your video I was able to get the gimbal unstuck. It took exercising the joints, compressed air, and dental floss to clean in-between the 2 front gimbal joints.
I lost control after losing the signal, flying in sports mode, with a tailwind full speed, 35 yards away. Think the issue is flying 5 feet AGL at full speed, won't do that again.

[@Vchannel79]

Thanks

[@jamcap7896]

Hey mate. My mini was drown on sea water. Then i was able to get it and washed on a fresh water. After cleaning it with fresh water then dry it. It was able to turn on and unfortunately it shows the gimbal stuck. Is it possible to fix with this method?? Thanks in advance

[@Vchannel79]

It's belong to your drone status, if the problem just from dust, sand..you can, if it's from cable you must change cable

[@treedeblue]

How are the drone flying laws in China?

[@Vchannel79]

Well, I don't leave in China so I don't know amigo

[@philipp.2121]

thank you

[@Vchannel79]

Thanks for leaving your comment

[@insider2218]

Hey mines stuck tilting to the right do you have any idea how I should fix this

[@uno9706]

Samed issue. I calibrate the gimbal and then it fixed.

[@nakkadu]

Thankyou

[@Vchannel79]

Thank you, success to you!

[@eyeintheskiesdavid9277]

Give it a try let you know how I get on with it hopefully it works thanks for sharing bud really enjoyed it big like from me bud 😎😎😎👍👍

[@Vchannel79]

Thanks for leaving your comment, success to you, buddy

[@eyeintheskiesdavid9277]

Thanks for your help I did it and it's working perfectly now thanks for sharing bud

[@Vchannel79]

@@eyeintheskiesdavid9277 Thanks for leaving your comment, all the best to you

[@gunnerzane5230]

I bought a SE DJI Mini for 50 bucks, the guy said the gimbal was stuck, it was just some sand or dirt causing the gimbal not to move freely. Just blew it out and was flying...

[@aukchinzalat]

incorporate gimbal data?

[@Vchannel79]

Nope amigo, just stuck by dust and sand

[@no15minutecities]

What about mini 2?????

[@Vchannel79]

It uses the same gimbal, the same part number amigo

[@shonoo60]

This happened to my DJI 1 day after purchasing after a small crash. What I noticed was the gimbal was actually LODGED into the socket.
It looked completely normal but further inspection showed it stuck too deep. I simply grabbed the gimbal and gently pulled outward - this free’d the lodged gimbal and fixed my problem. How this helps someone else

[@shonoo60]

Hope this helps others**

[@Xirru]

Same happened to me but now I notice that the camera has a horizon tilt to the left. I tried manually correcting it but it'll tilt whenever I strafe left or right.

[@chrissyh5501]

This was exactly what was wrong. Thanks!

[@clarydivertidisima1925]

Thanks. Ya me funciona .

[@ismailnurmaghribi1702]

Blow it is, thank you...

[@groslait7814]

my gimbal is not stuck but shaking upside down in high frequency with no image at all, I have crashed my drone into a building then it dropped down from 12m to the solid ground in the parking lot, fk me .

[@Vchannel79]

Maybe you need to replace the new gimbal cable

[@tomasmulasanchez7700]

Increible, pero me ha funcionado, estaba a punto de enviarlo a reparar.

[@Vchannel79]

Felicidades, gracias por dejar tu comentario, éxito para ti

[@glockgangtwun]

K

[@slbakoking9934]

Pizzz help meee pzzzz🙏🙏🙏❤️❤️🇱🇰

[@slbakoking9934]

Pizzzzz

[@krystianhermosa7951]

Ho Chi Minh Diu Ok, Lik man review, ichi wa kasu, Cionara, Me gusta sopladora, Muito bem, aloha, ci bu ple, thank you for the review😳😳😳😳😳😘😘😘😊😊☺️☺️😍😍😘😘😭😭💕💕🙈🙈🙈🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳

[@Vchannel79]

Obrigado por deixar o seu comentário. Tudo de bom para você e para os seus