Upgrade Your Workspace with the new FlexiSpot C7 Max ergonomic chair: US: bit.ly/3Bz7oyb Canada: bit.ly/3VHuyJs 🎄 Exclusive Christmas Discount🎄 🎄 Save $50 with code C750🎄
Merry Christmas to you. Thank you for your reviews. They are the most informative and useful if I don't want to be hyped up into considering something. Definitely not considering this laser engraver. But I just love the sound of the motors as they move. Thank you for showing that.
As you noted, the air assist does not have fine enough control and this is really needed to get good engraving results. One of the reason to get a lot of soot on your work piece from engraving is too much air assist which blows the soot back down onto the work. Engraving should have the minimum air assist, just enough to keep the lens clear, this lets the air exhaust carry the soot up and away as soon as possible. Can you change lenses? Is the software aware of that? How easy is it to clean and align lenses and mirrors as well as do other maintenance. Lasers require a fair amount of maintenance to run well and the ability to do that easily is critical. The lockout worries me. When you have a fire, and sooner or later you will have one, your ability to quickly deal with it seems like it seems like a big problem. I'd rather see some kill switches instead of a lockout. This is one of my issues with machines that don'e have an advanced mode which allows the operator more control. Something like this is great for casual users (and has some very cool smart features) but it seems that as you get more knowledgeable you might get frustrated.
Great analysis, thank you! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?
I noticed you selected 3mm basswood. I don't believe your material is basswood. I think your plywood is probably pine. Basswood is very tightly grained as opposed to pine being a wider more chaotic grain. I'm not sure if engraving would produce different results for these materials, just something I noticed. Merry Christmas!!
I don't want to be mean, but the Quality of the videos haven't improved. too much Noise/Grain seems like the ISO setting is too high, or the amount of lights are not enough. And, there is not enough space to record all the angles of a big object. Thank you for the content you put on your channel. wish you and your brother the best🌹🌹
Yes, since the machine needs to be fully enclosed and the cover is not transparent, it's more of a light grey, it makes the inside of the machine quite dark. In a few shots, we tried placing a phone inside the machine, which helped a little, but there still wasn’t enough light.
I'd say that the price and internal coolan reservoir are cons. Everything else is good. Ah, I almost forgot: the lack of a Linux version of the software is a BIG con
I am a nobody. It would be nice if you included metric measurement in your content, so the other 98% of the world could understand what the hell you are talking about.
Come on. 1 inch = ~2,5 cm 1 foot = ~33 cm Very easy to convert imperial measures to metric with mental calculations. By the way, I'm european and never got diificulties with conversions ;-)
While this is geared more towards semi professionals, it's good to have reviews of higher end machines to give perspective on the features being offered.
@@mpa568 Today's expensive machines are tomorrow's affordable one's. I can only dream of spending 4k+ on a laser but it's nice to see where the technology is heading.
Sure, but lately i was hoping to see reviews of more budget friendly machines again. Reason: Currently i have the comgrow Z1 as per recommendation. Super nice machine! But really slow cutting performance as mentioned in her Video. A step up would be nice, but a budget friendly option - maybe in a pack with housing. There is a few new options out there. With more expensive machines i assume you cant do much wrong. But with lower priced machines you can get fails much more likeky.
Simply go to the video settings where you select the video quality (e.g., 720p, 1080p). You'll notice a new option called 'Audio Track.' By default, it’s set to my original voice (English), but you can select other languages generated by TH-cam.
Upgrade Your Workspace with the new FlexiSpot C7 Max ergonomic chair:
US: bit.ly/3Bz7oyb
Canada: bit.ly/3VHuyJs
🎄 Exclusive Christmas Discount🎄
🎄 Save $50 with code C750🎄
Great job Aurora and team. Your audience is growing from hobbyist to semi-professionals and professionals!!! Keep up the great work!
Hey Aurora and Team, getting close to 100k !
Merry Christmas to my favorite reviewer!
Merry Christmas to you.
Thank you for your reviews. They are the most informative and useful if I don't want to be hyped up into considering something.
Definitely not considering this laser engraver. But I just love the sound of the motors as they move. Thank you for showing that.
Another great video!! Keep up the good work. Happy Holidays to you and your family.
P2S seems like it's the perfect platform to expand to a plasma-cutter head. Imagine how cool that would be to have as an option.
Aurora the wise ❤
Excellent Review 😊👍
As you noted, the air assist does not have fine enough control and this is really needed to get good engraving results. One of the reason to get a lot of soot on your work piece from engraving is too much air assist which blows the soot back down onto the work. Engraving should have the minimum air assist, just enough to keep the lens clear, this lets the air exhaust carry the soot up and away as soon as possible.
Can you change lenses? Is the software aware of that? How easy is it to clean and align lenses and mirrors as well as do other maintenance. Lasers require a fair amount of maintenance to run well and the ability to do that easily is critical.
The lockout worries me. When you have a fire, and sooner or later you will have one, your ability to quickly deal with it seems like it seems like a big problem. I'd rather see some kill switches instead of a lockout.
This is one of my issues with machines that don'e have an advanced mode which allows the operator more control. Something like this is great for casual users (and has some very cool smart features) but it seems that as you get more knowledgeable you might get frustrated.
So how long do you get to keep the machines when they send them for review? Always been curious about that.
Another banger review, thanks again!
Do you guys plan to be reviewing the core one before or after it comes out?
Using the laser to cut 2x4's would be boss AF, damn! :D
Great analysis, thank you! I have a quick question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?
Wow that auto z feature is wild
Very impressive machine but wow the price is beyond my means.
Great review as always though.
Merci je regarde justement pour l'acheter
Please be aware some burning plastics and vinyl fumes are toxic !!
I noticed you selected 3mm basswood. I don't believe your material is basswood. I think your plywood is probably pine. Basswood is very tightly grained as opposed to pine being a wider more chaotic grain. I'm not sure if engraving would produce different results for these materials, just something I noticed. Merry Christmas!!
Yes, they have the same settings. In the material library, it’s listed as “3mm basswood plywood”.
Is a heavily polluting CO2 laser the way we want to be going? BTW, the photo of you and your brother was adorable!
They beat bambulab with that name
I don't want to be mean, but the Quality of the videos haven't improved. too much Noise/Grain seems like the ISO setting is too high, or the amount of lights are not enough. And, there is not enough space to record all the angles of a big object.
Thank you for the content you put on your channel. wish you and your brother the best🌹🌹
Yes, since the machine needs to be fully enclosed and the cover is not transparent, it's more of a light grey, it makes the inside of the machine quite dark. In a few shots, we tried placing a phone inside the machine, which helped a little, but there still wasn’t enough light.
I'd say that the price and internal coolan reservoir are cons. Everything else is good.
Ah, I almost forgot: the lack of a Linux version of the software is a BIG con
You speak portuguese now
First!
Third I think but who was second
I am a nobody. It would be nice if you included metric measurement in your content, so the other 98% of the world could understand what the hell you are talking about.
Come on.
1 inch = ~2,5 cm
1 foot = ~33 cm
Very easy to convert imperial measures to metric with mental calculations.
By the way, I'm european and never got diificulties with conversions ;-)
I jumped around the video but all of the measurements I heard were in metric...
I prefer Reviews of more affordable machines. You had a lot of expensive machines lately.
For semi-professional or people, like me, not afraid by the price, it's an interesting review on a valuable channel.
While this is geared more towards semi professionals, it's good to have reviews of higher end machines to give perspective on the features being offered.
@@mpa568 Today's expensive machines are tomorrow's affordable one's.
I can only dream of spending 4k+ on a laser but it's nice to see where the technology is heading.
Sure, but lately i was hoping to see reviews of more budget friendly machines again. Reason: Currently i have the comgrow Z1 as per recommendation. Super nice machine! But really slow cutting performance as mentioned in her Video. A step up would be nice, but a budget friendly option - maybe in a pack with housing. There is a few new options out there. With more expensive machines i assume you cant do much wrong. But with lower priced machines you can get fails much more likeky.
@@mpa568 take a look for a Omtech K40 Plus. Affordable CO2 Laser engraver for hobbyist.
Why do I have to listen to French now? Is there a way to switch it back to English? The AI voice is terrible.
Simply go to the video settings where you select the video quality (e.g., 720p, 1080p). You'll notice a new option called 'Audio Track.' By default, it’s set to my original voice (English), but you can select other languages generated by TH-cam.
First!