DISCOUNT CODE. Please see the description on how to get a nice discount for any extreme rate product bought on their website. Seems like people aren’t reading the description so here’s a comment too. After 6:17 you will need to take the kickstand off the old plate and attach it to the new plate. It’s not hard and it’s a small screw that will take you 15s to change. So sorry, I missed this piece after upload.
Dont apologise, I’ve seen other channels make huge mistakes in switch mods and not care, you’re trying to help people for what is a tiny thing. If they dont read the description or the comment then they deserve to get it wrong.
Followed this video step by step, I used my own screwdrivers and they worked excellently. Luckily I was paying enough attention, that I transferred the kickstand piece. It's great. Now onto the joycons!
Definitely don't use the extremerate screwdrivers. They will strip your screws. Found out the screwdriver tip they sent me was already chipped when it stripped the only screw I tried to remove.
I had the same experience. I ended up having to buy a screw extractor kit to get the stripped screw out of the joy con rail. I highly recommend anyone who likes to do this sort of thing to go buy one of those iFixit kits.
I didnt realize the body was way easier replacing the shells and I did the joycons first. Pretty hard for a first timer but it was a success anyway. I thought the body was going to be harder. Thank God it isn’t. 🙂
Back again to watch a tut for the backplate. thanks again for these. Now I have a cosmic themed switch thats super fun. Those back y screws are awful. I ended up having to snip and pry off some of the plastic from the old backplate for the last corner because the screw stripped so bad
well boys I did it and broke a joycon trigger. easy fix if I could find that piece lol thankfully had another joycon to take apart and used that one. not as hard as it looks but it's so TINY!
My idiotic nephew dropped my Switch when I told him not to touch it or play on it since I was in the middle of a boss fight ( botw ). He touched my Switch anyway and now the back is all scratched up because it slide over the ground. I am planning on getting a new backplate so thank you for this!!!
I am curious, did you get your kickstand to eventually stay in place? I noticed your kickstand kept falling. If the backing is changed out, will the kickstand continue to fall out? or is yours just broken and it should be fine?
Just got me Atomic Purple backplate! Comin in on Wednesday! Since I didn't fancy Monster Hunter Rise that came with the special edition Switch, I'm taking off the backplate. I like the Joycons though! Will be watching this tutorial, you did great explaining the process thoroughly!
I’m giving it a go with the let’s go pikachu backplate. This is my first time taking something apart, wish me luck. If it goes well then I may mod my joycons too
This is the best tutorial for the backplate I've ever seen, you explain it so well and simple and I tried unscrewing the last one of the four screws on the back... and It's stripped now 😭😭
Great video just forgot to mention the fact that the kickstand has an extra component that needs to be replaced before you put the back on. Wish you mentioned that mate x
i just got mine today! :) but the sad thing is that the Y00 screw driver kind of chipped on the top on one of the sides, so it can’t catch the screw hole at all :/ and i had a lot of trouble taking out the two phillips on the side with the included driver, i ended up only getting one out, and the other is slightly stripped, but not really, i ordered the 64 bit ifix it kit as well today before i continue this, hopefully it will help me haha because the ones on the side rail seem a little bigger? the driver would not catch them at all for me, but oh well. really nice tutorial though!!
Oh no! I hope you get it sorted. The screws in the switch don’t help as they all seem to be poor quality. Let me know if I can help in any way if you get any issues with it.
evangeline Polacek tufaga my dad actually helped me and drilled the top of the screw head out, then kinda just twisted it out manually, but i would really recommend getting the ifixit kit, or better quality screw drivers, it really helps a ton (it also happened with one of the corner screws on the back, and he did the same thing, he drilled it then we just grabbed pliers and manually turned the screw part out) hopefully you get it fixed :)
Thanks :) These videos help a lot. My only problem (and a lot of other peoples problem) are those OEM screws. The middle one where the controller slides in was a B@#$H to get out. Ended up breaking the back panel which did no damage to the aesthetic of the switch but now if i pull up kinda hard on the left joy-con it just slides right out without pressing the black release button. Its not a huge deal. Doesn't seem to affect handheld game play at all. Definitely easier to take apart and put together than the controllers though.
Yeah, In my latest mod videos i started with some tips on how to remove them as i didn’t have an issue at first. Awful arent they. I replaced all mine with the ones that came with the kit.
The joycon shells are not very NEW looking ,I like the back but do they make joycon shells that match it as well as a front she'll piece? Of course replacing the front shell looks like a nightmare Most of the videos I see suggest saving and reusing the 3m tape that hold the digitizer to the shell Not sure if any front she'll replaces come with new tape I just picked up a second switch cheap ,had the joycons fixed by Nintendo for free (drift) It has some scratches and I was thinking of replacing the digitizer but if I am going to go through that I might as well replace the front shell as well then Only problem is that I heard It now near impossible to separate the digitizer from the LCD and put In a new digitizer with getting dust between them ,not sure I want to Sprint for a new reassembled digitizer and LCD though
Have done mine, thanks for letting me know about the kickstand. To anyone who misses this, you’re an idiot 😂 literally made a comment, it’s in the description AND a card, some channels would have left this for people to make the mistake. Cheers.
Thanks a bunch, you may want to notify ppl about the game card cover as well in the description so they don't have to take everything out again for that step tho
This video is incredibly well presented and easy to follow. My only question is how do you remove the Y screws if they've been stripped? I've unfortunately managed to damage mine and now I'm kind of at an impasse.
Thank you. OK. Don’t worry. It can be done. I’ve done it a few times. What I suggest is getting the sharpest flat screwdriver you have. Then poke one corner in, so you are in at an angle. Then force the screw round. Instead of holding the screwdriver still and turning, pull the whole screw round. As soon as it moves even a tiny bit you should be free. Let me know how you get on.
funny thing you mentioned the original switch screws are terrible because one is so filed already icant take it out :( do you have any suggestions as to how to remove it? is it possible at all?
The screws are giving me a headache. The joycons weren't too bad but the screws on the side are stuck in there good, and I completely stripped one of them. I tried a rubber band, a rubber glove, not sure what to do anymore. :(
If the secrw place in by misteaks and it is not same and damge the hole in case and the secrw that must use there is lose the reall place and round like not hold any thing not stop... What can do and wich case must replace if want replace????
@@CTAtechdesk yes no worries bud, id noticed what had happened 👍🏼 just done joycons too! another great tutorial! just noticed buttons are hard to depress so rubber over buttons mist have moved 😡 lol start again!
4:35 does anyone know where i can get the grate and sponge thing? i got a acnh backplate from ebay but it doesnt have those parts and im not sure what to do. thanks
Few things to try. Firstly put an elastic band in between the screw and screwdriver. Else try a flat bladed driver and dig the corner in a n try and scrape it round. Even I you move it slightly the rest can be done with quality tweezers. HTH
one of the sides screw is stripped and im scared to try and remove it using a drill or something could i potentially snap the old backplate off and get it out that way?
The screws in the switch aren’t the best. Take it very carefully. Try and put an elastic band over it for a bit more purchase. Or use a flat blades screwdriver and dig the corner in and turn. Even if you move it slightly you can do the rest with some small pliers.
Do the square foams(?) and dust filter usually come with backplate replacement kits? I dont know how to check aaa :< can i just reuse the square ones if mine didnt come with any?
I'm only planning to get a new backplate because my current is kinda loose on the top. Do I have to replace the backplate entirely, or can I just tighten the screws of it?
So my backplate didn't come with the vents or sponges, I was able to find the vents separately but not the sponges, are they a huge necessity for the back or can you recommend me someplace that sells them???
I got the kit a few days ago but when I tried to take out the screws they just got stripped and now Im kinda stuck. Is there anyway of getting the screws out with the screwdriver that comes with it? Is there a better screwdriver I can use?
Yeah, I mention this, the screws in the switch are so poor. What I did when I threaded it was get a small flat bladed screwdriver and jam the corner of it into the screw and rotate the whole thing round with any recess you can. As soon as it moves even a mm it should be easier to get out. I hope that makes sense. Good luck 👍🏻
@@Cyanjin i've read getting a wide banded rubber band, laying it over the stripped screw then pressing the screwdriver against it (using the rubber band to fill in the stripped area) and unscrewing should work
Is it true that the nintendo swithc v2 backplate screws are glued so its harder to take off is your siwthc the original or the newer switch im just scared to strip my screws D:
I’m not sure if that’s true or not! With the screws, just be careful, poke the screwdriver in hard and turn it 1/4 way round, dot try any more, then repeat til it’s relatively easy to fully unscrew.
@@CTAtechdesk I got mine few days ago. I got the snes Europe case I also ordered the d pad version of the controller cases it looks so sick. Ty for your video
Theres a few techniques. TH-cam has some guides. Try putting a rubber band over it. Or use a small flat bladed screw driver and dig the corner in and turn. Even if you move it a bit, you can then use tweezers to undo it
On the outside of the switch, yes, but some have different head. Some 4 “prongs” some three. It’s only when you get inside the switch they differ in length.
Just go careful as the screws in the switch aren’t fantastic quality and can be stripped. Just take it slowly and let me know if you need any help albeit this mod is relatively easy 👍🏻
Was going great until I was doing the kickstand, it's a bit shitty they couldnt include a kickstand spring as i bought this as a kickstand replacement in the first place lol
@@CTAtechdesk No brother it's not you're fault its mine, basically my son lost his kickstand at his mothers so I sought after a replacement (approx £7 on amazon) so I figured I could buy the backplate for £13 and get the kickstand included and it did, but the metal spring/bar that clips it in place isn't, if I would of watched the tutorial first I would of known I needed the old stand to transfer the mechanism needed to keep it in place 😵. But nice tutorial it was very simple to follow and thank you I'll sub.
@@CTAtechdesk yeah but you need to understand that people do a search on TH-cam for “switch backplate replacement” and your vid comes up and people watch it and then get stuck when it comes to the part with the stand which is not great when you are following the vid word for word pausing at intervals etc I had to quickly find another vid to follow which explains how to do the stand.
Hey you left out a step, make sure to remove the other part of the kickstand that is on your original backplate!! If not you will have to remove the new one again if following this guide step by step. Otherwise good thanks
Ok folks do NOT use the extreme rate screws. They are garbage. Secondly because it was never mentioned I missed the part for the kickstand and got everything back on until the kickstand wouldn't stay in place. Then I found the part I didn't move over because it was ignored in the video and the extremerate screw stripped in the process of removing it.
DISCOUNT CODE. Please see the description on how to get a nice discount for any extreme rate product bought on their website.
Seems like people aren’t reading the description so here’s a comment too. After 6:17 you will need to take the kickstand off the old plate and attach it to the new plate. It’s not hard and it’s a small screw that will take you 15s to change. So sorry, I missed this piece after upload.
Dont apologise, I’ve seen other channels make huge mistakes in switch mods and not care, you’re trying to help people for what is a tiny thing. If they dont read the description or the comment then they deserve to get it wrong.
Thanks for the comment.
@@CTAtechdesk Are all Switch backplates the same? I have a newer Switch, my son has my old launch model. Will these replacement backplates fit both?
@@jaspersalenga5330 yes
Bruh I stripped the screw and I didn’t read the description. Now the kick stand will never be fixed
Followed this video step by step, I used my own screwdrivers and they worked excellently. Luckily I was paying enough attention, that I transferred the kickstand piece. It's great.
Now onto the joycons!
Sorry about the kickstand, didn’t realise til after upload, hence the description text. Hope it goes ok with the joycons.
best tutorial for this by far! I like that you actually walk through and don't just blast EDM the whole time like the official tutorial haha. Subbed!
Thank you. 👍🏻Appreciate it.
Just remember the part you need to attach the kickstand properly, he missed it when reassembling.
Please read the description. It’s been there the whole time 👍🏻
acoustic edm is my favorite
@@icblundell60 how do you do that? My kickstand isn’t functioning as normal, it’s not connecting.
Definitely don't use the extremerate screwdrivers. They will strip your screws. Found out the screwdriver tip they sent me was already chipped when it stripped the only screw I tried to remove.
Sorry to hear that. The ones I got were excellent.
I had the same experience. I ended up having to buy a screw extractor kit to get the stripped screw out of the joy con rail. I highly recommend anyone who likes to do this sort of thing to go buy one of those iFixit kits.
The screws are awful in the switch. I replaced all mine and can take them in and out so much more easily.
yea honestly i just used my own
Thanks for the video, what kind of accessories were used to take the switch backplate apart? And what are the sizes or names for the screws. Thanks!
I didnt realize the body was way easier replacing the shells and I did the joycons first. Pretty hard for a first timer but it was a success anyway. I thought the body was going to be harder. Thank God it isn’t. 🙂
Just replaced my son's switch back using this guide thank you most helpful 🙂
Back again to watch a tut for the backplate. thanks again for these. Now I have a cosmic themed switch thats super fun. Those back y screws are awful. I ended up having to snip and pry off some of the plastic from the old backplate for the last corner because the screw stripped so bad
Grease stains: are you really gonna leave me after the times we spent together
Me: YESSSSIRRRRR
Edit: i stripped by screws
Use a latex glove over the screwdriver :)
@@dean4311 i tried.......
I did my joycons and i thought the back was gonna be the easiest part, first thing i did was strip the top left screw :/ fml
@@jordansalvador316 same problem I had. I ended up taking off the side screws (and all the screws tbh) and just pried that thing open
@@RamieJazairli lol yeah i just left it like that, hope it worked out in the end for u
Ok easy enough. I'm gonna give it a go. Don't feel like tackling the joycons tho
I promise you it’s not as hard as you’d think. Just follow both my videos and you will be fine 👍🏻
yea homie dont be scared. its not a race so take as much time as you need.
It’s pretty easy, you just have to be careful with the ribbon wires and screws
I did joy cons first way easier then ya think and really worth it
well boys I did it and broke a joycon trigger. easy fix if I could find that piece lol thankfully had another joycon to take apart and used that one. not as hard as it looks but it's so TINY!
My idiotic nephew dropped my Switch when I told him not to touch it or play on it since I was in the middle of a boss fight ( botw ). He touched my Switch anyway and now the back is all scratched up because it slide over the ground. I am planning on getting a new backplate so thank you for this!!!
Just watched all three of your switch videos and swapped my own parts. Just wanted to say thanks man, saved me hundreds of dollars by doing it myself
Glad they helped
Just purchased these- They are beautiful. Thanks for the tutorial
Cool tutorial man!
I've been meaning to replace the broken back shell with the atomic purple shell from extremerate
Nice! Just make sure you watch the whole vid first as I miss the kickstand and didn’t realise til it was too late. 👍🏻
I am curious, did you get your kickstand to eventually stay in place? I noticed your kickstand kept falling. If the backing is changed out, will the kickstand continue to fall out? or is yours just broken and it should be fine?
I followed this and its perfect. The kickstand isnt an issue, but then again, I have basic reading skills so it was easy, unlike 33 other people 😂
I have tried to help after i realised my mistake. Glad it worked for you 👍🏻
watched this and the joycon tutorial, videos were easy to follow and switching shells was easy but the hard thing was every screw liked to strip
Just got me Atomic Purple backplate! Comin in on Wednesday! Since I didn't fancy Monster Hunter Rise that came with the special edition Switch, I'm taking off the backplate. I like the Joycons though! Will be watching this tutorial, you did great explaining the process thoroughly!
Good one. just take note of the bit I missed in regards to the kickstand. 👍🏻
Screw drivers stripped the last triwing and phillips. DO NOT USE THE SCREWDRIVER PROVIDED WHOEVER BUYS THIS KIT! Oh well, worth a try.
I might try replacing the shell on my switch, joycons, and my pro controller with the snes shells and put a snes faceplate on my dock
Excellent 👍🏻
I’m giving it a go with the let’s go pikachu backplate. This is my first time taking something apart, wish me luck. If it goes well then I may mod my joycons too
So how did it go
Probably never recovered of the outcome
I never did it lmao 😂
@@opratios3081 still?
@@Healcraft nope
This is the best tutorial for the backplate I've ever seen, you explain it so well and simple and I tried unscrewing the last one of the four screws on the back... and It's stripped now 😭😭
Great video just forgot to mention the fact that the kickstand has an extra component that needs to be replaced before you put the back on. Wish you mentioned that mate x
It’s the first line in the description, pinned comment and a card at the exact point I left it out. 👍🏻
You’re a true lad. Your tutorials on the switch shell change was super helpful and made doing this stuff super easy!
Glad it helped 👍🏻
Nice was very Detailed and simple to install for my first time... now for the Joycons Lol
Good one. Hope you sorted the kickstand part that I inadvertently missed. Any questions about joycons, do ask on the video 👍🏻
What are the things that you have to stick on the back cover
Thank you dude for helping that's i want to do switch shell 😊
what if the backplate screws are stripped? all 4 of them
Does anyone know where I can order the little sticky cushion that go on the corners? Thanks in advance.
i just got mine today! :)
but the sad thing is that the Y00 screw driver kind of chipped on the top on one of the sides, so it can’t catch the screw hole at all :/
and i had a lot of trouble taking out the two phillips on the side with the included driver, i ended up only getting one out, and the other is slightly stripped, but not really, i ordered the 64 bit ifix it kit as well today before i continue this, hopefully it will help me haha
because the ones on the side rail seem a little bigger? the driver would not catch them at all for me, but oh well.
really nice tutorial though!!
Oh no! I hope you get it sorted. The screws in the switch don’t help as they all seem to be poor quality. Let me know if I can help in any way if you get any issues with it.
Same issue here, I hope getting a new screw driver will do the thing.
same thing happened to me with the sides
evangeline Polacek tufaga my dad actually helped me and drilled the top of the screw head out, then kinda just twisted it out manually, but i would really recommend getting the ifixit kit, or better quality screw drivers, it really helps a ton (it also happened with one of the corner screws on the back, and he did the same thing, he drilled it then we just grabbed pliers and manually turned the screw part out) hopefully you get it fixed :)
One of the sides of my switch's screws (the middle one) came stripped. Is there any recommendations for how to deal with that?
Left hand drill bits make it easy as hell
great video!! helped a lot no issues but for one the kickstand actually has an housing you have to screw off like with the game slot cover
Love the witcher sticker
Thanks and thank you so much just the video I was looking for
Thanks :) These videos help a lot. My only problem (and a lot of other peoples problem) are those OEM screws. The middle one where the controller slides in was a B@#$H to get out. Ended up breaking the back panel which did no damage to the aesthetic of the switch but now if i pull up kinda hard on the left joy-con it just slides right out without pressing the black release button. Its not a huge deal. Doesn't seem to affect handheld game play at all. Definitely easier to take apart and put together than the controllers though.
Yeah, In my latest mod videos i started with some tips on how to remove them as i didn’t have an issue at first. Awful arent they. I replaced all mine with the ones that came with the kit.
I just want to replace my back plate know any good back plates designs?
This deserves a follow and a like ➕👤👍🏼
Are all the screws the same size? Does the kickstand just clip back in?
Not all screws are the same size.
The joycon shells are not very NEW looking ,I like the back but do they make joycon shells that match it as well as a front she'll piece?
Of course replacing the front shell looks like a nightmare
Most of the videos I see suggest saving and reusing the 3m tape that hold the digitizer to the shell
Not sure if any front she'll replaces come with new tape
I just picked up a second switch cheap ,had the joycons fixed by Nintendo for free (drift)
It has some scratches and I was thinking of replacing the digitizer but if I am going to go through that I might as well replace the front shell as well then
Only problem is that I heard It now near impossible to separate the digitizer from the LCD and put In a new digitizer with getting dust between them ,not sure I want to Sprint for a new reassembled digitizer and LCD though
How do i fix the kickstand? Its all loose and wont go in after swapping the shell?
Have done mine, thanks for letting me know about the kickstand. To anyone who misses this, you’re an idiot 😂 literally made a comment, it’s in the description AND a card, some channels would have left this for people to make the mistake. Cheers.
Great video, thank you. Any chance you can tell me where you got that screwdriver?
Hi there, it came with the rear plate pack. You also get one with the pack of joycon shells.
You can get them off of amazon I have a fuck Ton of those little screw drivers from my projects
Thanks a bunch, you may want to notify ppl about the game card cover as well in the description so they don't have to take everything out again for that step tho
The step is in there before any screwing, I would never recommend doing this without watching it fully first, this or any mod.
I messed this exact backplate up and I'm worried that after putting back on the backplate that I stripped the holes
Thank you!
How do you change the Game Card cover? What kind of Screw Driver does it need?
This video is incredibly well presented and easy to follow. My only question is how do you remove the Y screws if they've been stripped? I've unfortunately managed to damage mine and now I'm kind of at an impasse.
Thank you. OK. Don’t worry. It can be done. I’ve done it a few times. What I suggest is getting the sharpest flat screwdriver you have. Then poke one corner in, so you are in at an angle. Then force the screw round. Instead of holding the screwdriver still and turning, pull the whole screw round. As soon as it moves even a tiny bit you should be free. Let me know how you get on.
@@CTAtechdesk unfortunately it I'm not having much luck. I'll have my dad take a look and see what we can do.
funny thing you mentioned the original switch screws are terrible because one is so filed already icant take it out :( do you have any suggestions as to how to remove it? is it possible at all?
This helped a bunch! Thanks!
The screws are giving me a headache. The joycons weren't too bad but the screws on the side are stuck in there good, and I completely stripped one of them. I tried a rubber band, a rubber glove, not sure what to do anymore. :(
Are there any backplates for Nintendo Switch v2 that have better kickstand?
Do you know anywhere that has this console and joycon design in stock, the link in your bio doesn’t have this design available
All I know of is going through extremerate on amazon
I've never done anything when it comes to replacing the back of the switch. How easy would you say it is?
Very. Just take the screws carefully as they strip easily. And don’t forget to put the kickstand on in the place I mention 👍🏻
what if you lost your kick stand can you get another metal piece
If the secrw place in by misteaks and it is not same and damge the hole in case and the secrw that must use there is lose the reall place and round like not hold any thing not stop... What can do and wich case must replace if want replace????
Can you switch the black plate or the original switch into the oled one
My screws don't fit my backplate 😞
The screws from the bottom and the one from the top. They don't fit.
does anyone know if there any down side to not having the little sponges on each bottom corner of the backplate?
That's what I'm wondering too. Mine didnt come with any...
Yeah sane
Did you guys ever figure that out?
EPIC VIDEO - EASY TO FOLLOW - CLEAR INSTRUCTIONS - WORKED A TREAT! 👏🏼
Thanks. Sorry about not noticing the kickstand part. Hope you got that sorted. 👍🏻
@@CTAtechdesk yes no worries bud, id noticed what had happened 👍🏼 just done joycons too! another great tutorial! just noticed buttons are hard to depress so rubber over buttons mist have moved 😡 lol start again!
How fo you put the kick stand back on
Hey, I just swapped my backplate. My kickstand isn’t connecting to the switch anymore, it just isnt clicking in. Is there a reason for that?
He forgot to replace the kickstand in the video same thing happened to me:(
what size screwdriver did you use?
Why are the four corners screws unscrewing
4:35 does anyone know where i can get the grate and sponge thing? i got a acnh backplate from ebay but it doesnt have those parts and im not sure what to do. thanks
Any tips for removing one of this tiny screws that got stripped? Sadly, its keeping me from swapping my backplate.
Few things to try. Firstly put an elastic band in between the screw and screwdriver. Else try a flat bladed driver and dig the corner in a n try and scrape it round. Even I you move it slightly the rest can be done with quality tweezers. HTH
Soooo I stripped one of the screws that go on the side where the joy cons go.... I believe all hope is lost..
I transferred the kickstand hardware and it won’t stay on now
did you use the tools provided that extremerate provided?
Yes. I have put a set in my Amazon shop of the ones I use if you don’t have them.
one of the sides screw is stripped and im scared to try and remove it using a drill or something could i potentially snap the old backplate off and get it out that way?
The screws in the switch aren’t the best. Take it very carefully. Try and put an elastic band over it for a bit more purchase. Or use a flat blades screwdriver and dig the corner in and turn. Even if you move it slightly you can do the rest with some small pliers.
Do the square foams(?) and dust filter usually come with backplate replacement kits? I dont know how to check aaa :< can i just reuse the square ones if mine didnt come with any?
Just reuse them 👍🏻
Stripped a one of the side screws, the tools that come with it are pretty bad. Any tips?
A few people have said, put a large rubber band on it and try screwing again. 👍🏻
I'm only planning to get a new backplate because my current is kinda loose on the top. Do I have to replace the backplate entirely, or can I just tighten the screws of it?
you could try tightening them. nothing to lose.
@@CTAtechdesk Since my backplate is mainly loose on the top, which screw should I try tightening?
I dont have a kickstand. So when you need the peice from the kickstand, do you know where to get it?
You can probably find one on Amazon, eBay, or Etsy
Video: the backplate is easy!
Me: *Strips half of the screws*
Also me: 😓😧😦😭
I’m subscribing
does changing the back plate result to voiding warranty ? i didnt notice any stickers or anything
I’m pretty sure it will.
Yes, I believe modding/opening your switch in any way will void the warranty.
So my backplate didn't come with the vents or sponges, I was able to find the vents separately but not the sponges, are they a huge necessity for the back or can you recommend me someplace that sells them???
Did you figure this outM
@@RathalosEmperor no I didn't but the sponges weren't that important
@@TayMont217 thanks for the info
Would u recommend me to do this as I have a damaged switch back plate ?
Yes I would
Console Accessories ok thanks for replying love your content 🙏
I got the kit a few days ago but when I tried to take out the screws they just got stripped and now Im kinda stuck. Is there anyway of getting the screws out with the screwdriver that comes with it? Is there a better screwdriver I can use?
Yeah, I mention this, the screws in the switch are so poor. What I did when I threaded it was get a small flat bladed screwdriver and jam the corner of it into the screw and rotate the whole thing round with any recess you can. As soon as it moves even a mm it should be easier to get out. I hope that makes sense. Good luck 👍🏻
@@CTAtechdesk I tried that and no luck. Guess it wasn't meant to be. Thanks for tips, maybe a video showing them off could be helpful.
@@Cyanjin i've read getting a wide banded rubber band, laying it over the stripped screw then pressing the screwdriver against it (using the rubber band to fill in the stripped area) and unscrewing should work
Is it true that the nintendo swithc v2 backplate screws are glued so its harder to take off is your siwthc the original or the newer switch im just scared to strip my screws D:
I’m not sure if that’s true or not! With the screws, just be careful, poke the screwdriver in hard and turn it 1/4 way round, dot try any more, then repeat til it’s relatively easy to fully unscrew.
@@CTAtechdesk alright thanks!
Did this mess with your ability to charge on the switch dock?
Not at all
@@CTAtechdesk I got mine few days ago. I got the snes Europe case I also ordered the d pad version of the controller cases it looks so sick. Ty for your video
The kick stand doesn’t stay on now
I can’t even get the screws out TwT help
can you please help me with stripped screws
Theres a few techniques. TH-cam has some guides. Try putting a rubber band over it. Or use a small flat bladed screw driver and dig the corner in and turn. Even if you move it a bit, you can then use tweezers to undo it
Are all the screws the same size?
On the outside of the switch, yes, but some have different head. Some 4 “prongs” some three. It’s only when you get inside the switch they differ in length.
Console Accessories Thank you!! My atomic purple back plate is on its way!👍🏼
Just go careful as the screws in the switch aren’t fantastic quality and can be stripped. Just take it slowly and let me know if you need any help albeit this mod is relatively easy 👍🏻
Console Accessories update. I wish I had read your comment earlier. The four last screws may be stripped.
I guess I can at least switch the kickstand😢
Was going great until I was doing the kickstand, it's a bit shitty they couldnt include a kickstand spring as i bought this as a kickstand replacement in the first place lol
Oh no! I bet my fault on the video didn’t help. Sorry about that. Are you able to send it back? You can get kickstand replacements if needed.
@@CTAtechdesk No brother it's not you're fault its mine, basically my son lost his kickstand at his mothers so I sought after a replacement (approx £7 on amazon) so I figured I could buy the backplate for £13 and get the kickstand included and it did, but the metal spring/bar that clips it in place isn't, if I would of watched the tutorial first I would of known I needed the old stand to transfer the mechanism needed to keep it in place 😵. But nice tutorial it was very simple to follow and thank you I'll sub.
Than you so much ❤
👍🏻
you dont explain how to remove the kick stand
4 years and this still comes up. I’ve given plenty of hints on the reason for this. Thumbnail, description (twice), cards.
@@CTAtechdesk yeah but you need to understand that people do a search on TH-cam for “switch backplate replacement” and your vid comes up and people watch it and then get stuck when it comes to the part with the stand which is not great when you are following the vid word for word pausing at intervals etc
I had to quickly find another vid to follow which explains how to do the stand.
How to put the kickstand back in????!!!
All in the description and pinned comment.
I’m so dumb I legit sat there for 10 minutes wondering why the kickstand wasn’t going in
Sorry, I forgot it in the video, I have put it in the description and a card to help.
The thumbnail is clickbait you forgot to add the Witcher Wolf Medallion
Ha ha. I’ll let you in on a secret. It’s an old picture ssshhhhh ;)
Console Accessories okay you secret is safe with me 🤫
Console Accessories okay you secret is safe with me 🤫
Console Accessories okay you secret is safe with me 🤫
Hey you left out a step, make sure to remove the other part of the kickstand that is on your original backplate!! If not you will have to remove the new one again if following this guide step by step. Otherwise good thanks
Thx✌🏻
I don't have my kickstand anymore I dropped it gaming on the go
Forgot the last screw there huh
Yup. can’t change the video so put info in a card that pops up just before. in the first lines of the description and in a pinned comment.
@@CTAtechdesk okay. Sorry i didn't saw it.
The kickstand isnt reliable and the materials are less sturdy than stock switch. I wouldnt recommend this product
But it looks cool
But honestly who’s buying a custom backplate for functionality
he has the same screwdriver as me 😅
Jesus loves you always remeber that amen hallelujah ❤❤❤❤
Ok folks do NOT use the extreme rate screws. They are garbage. Secondly because it was never mentioned I missed the part for the kickstand and got everything back on until the kickstand wouldn't stay in place. Then I found the part I didn't move over because it was ignored in the video and the extremerate screw stripped in the process of removing it.
Did you not read the pinned comment? the description? the card that pops up seconds before?
Are all of the screws the same size?