Godox V860iii Speedlite - Complete Walkthrough
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Buy it here and get Strobepro's free in-house 2-year warranty!
strobepro.com/collections/god...
X2T Controller Video: • Godox X2T Radio Contro...
XPro Controller Video: • Godox XPRO Radio Contr...
Video Contents:
00:00 - Intro
00:25 - Unboxing
01:31 - Physical Overview
07:24 - Mounting Your Flash
08:35 - On-camera Operation
08:56 - TTL and Exposure Compensation
10:02 - Adjusting Zoom
12:04 - TCM Function
13:18 - TTL/Manual Hard Switch
13:37 - Manual Mode
15:31 - Sync Modes and FEB
17:01 - Multi Mode/RPT
19:35 - Autofocus Assist Beam
20:28 - Wireless Operation
20:46 - Master/TX Mode
24:04 - S1/S2 (Optical) and PC Sync triggering
26:15 - Radio Receiving/RX Mode
28:28 - Pairing a Controller
33:14 - Custom Functions Menu
38:38 - Factory Reset
39:03 - Canon-Specific Instructions
42:05 - Conclusion
RAISING THE BAR
Godox's beloved V860 flashes just keep getting better! Built around a rechargeable lithium battery, these flashes have been outperforming speedlites from the big camera brands since 2015. This third iteration brings a suite of performance and quality of life upgrades. Once you use one, you'll never look back!
THE STROBEPRO DIFFERENCE
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's helpful staff, in-house 2-year warranty, and Calgary-based service centre.
LITHIUM-POWERED
Compared to a conventional flash that uses four AA batteries, you'll see a huge improvement to both recycle times and shots per charge. We're talking a full power recycle of just 1.5 seconds, and 480 full power shots before you'll need to reach for your charger. Don't risk missing a shot!
X-SERIES WIRELESS
The built-in 2.4GHz radio receiver offers full power control and triggering without the need for an attached receiver. Just a single radio transmitter is all you’ll need to have full control over all your V860iii flash units. Use your flash on-camera, off-camera, or as a radio master!
IMPROVED MENUS
The menu system has received an overhaul to be quicker and more intuitive. Particularly improved is the radio master interface, allowing you to easily control other Godox flashes and strobes from the V860iii's rear display.
QUICK-RELEASE LOCK
A minor complaint with previous iterations of the V860 was its somewhat fiddly wheel-lock for its hot-shoe. The V860iii has a simplified button and lever style lock that will speed things up for you.
LED MODELING LIGHT
A small but bright LED has been added to the front of the flash body, and can be used as a focusing aid or as a rough preview of where your bare flash will land.
TTL
TTL mode allows your camera to automatically set the power and zoom of the flash.
HSS
High Speed Sync allows you to shoot shutter speeds up to 1/8000s. Perfect for freezing action and giving you full control of the ambient light, even in the bright midday sun.
200MM ZOOM
The huge 20-200mm zoom range allows the flash to push light as far or wide as you'd reasonably want to. Flip out the wide-angle diffuser, and your 20mm zoom will spread to 14mm.
EXPANDED TILT ANGLES
The V860iii brings added flexibility to the tilt and swivel mechanisms. Swivel from 0 to 330 degrees horizontally, and tilt from -7 to 120 degrees vertically.
DEDICATED TTL/MANUAL SWITCH
A small switch on the front of the flash-body can quickly switch you between TTL and Manual modes. When using the V860iii on camera, it provides a quick and tactile way to cycle between modes without entering internal menus. - วิทยาศาสตร์และเทคโนโลยี
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
100 times better than the Godox tutorial, thank you!
Thank you! Glad you found it helpful. :)
Its fantastic how you thoroughly go over the features. Nice job.
Thanks Jesse, great job explaining all the functions. You are a really good teacher. Enjoy your videos and keep them coming.
Thank you so much Jesse. I've been waiting for a clear tutorial. This was it. I have this with the X2T. Great combo. As someone new to flash, I eventually got everything working but didn't quite know how. I would hit something and everything would stop working - and I'd spend the rest of the evening in the dark wondering what I'd done wrong. This was very clear. 🙂
Thank you so much for creating a straight forward, concise and extremely useful video!!! Love how you sectioned it off with features specific to Canon. Thank you so much!
Appreciate the thorough review. Answers all my questions about the differences from the older model and I certainly appreciate the little improvements like the hot shoe locking mechanism, the hidden pocket for the foot and the ‘manual/TTL’ switch👍🏼👍🏼 Cheers from Surrey, BC😄
This was EXACTLY the tutorial I needed to get going! No rambling, clear and concise. Thank you so much!
I just bought a v860iii-s and your video is a god-send. Very well done and very, very informative!
This video is GOLD!! And thank you so much for showing exactly how to reset when things go crazy off the rails.
Glad to help!
excellent tutorial. I just bought it and the explanation is helping me to get the best out of this flash. Thanks
Very helpful. Not too fast and not too slow
Thank you so much for this great full tutorial. I am a new photographer and I really wanted to know how my Flasher works. This video really covers all that I need. Love it!
Wow!!!! Thank you sooooo much!!!! I underused my V860ii flash so much. Will do a lot better after this video....You've just upped my game! Thank you!!!
Great overview. Concise and very helpful. I was pulling out my hair trying to get my Flashpoint trigger to work with my flash off-camera. Bookmarked, because I don't remember so well any more.
Great to hear!
Finally! A great tutorial on this product! Subscribing!
This is a great tutorial, I was having a hard time to connect it to my xpro. Thank you very much
The cleanest, very neat and very organize video tutorial! Very clear to understand. Love your channel.
Thank you sooo much sir, your way of telling is so nice, and definitely all will understand ..May god bless you always sir
I can’t thank you enough for this detailed walkthrough, I was losing my mind trying to figure out why my flash wasn’t working when I would attach it to the camera. Keep up the good work!
You're very welcome!
Thank you. Still a great introduction video. Just got the flash and now I am a lot wiser.
Great video! Thanks for spending so much time on this...lifesaver!!! 💯
I'm a new photographer and bought this flash a while ago.. i never used it, cause I had absolutely no idea how to work with it. This tutorial saved me haha. I have an event next Saturday and was sweating bullets, so worried my photos would all be dark. Thank you so much for this video!
Glad you found it helpful!
Thank you so much for this tutorial. Got all my questions answered here! Really appreciate 👏
just got my new godox flash and this is so excellent. my Nikon flashes have been terrible... I can't wait to shoot my next event. THANK YOU...
Excellent, well done. BTW your narrative says you can't have auto zoom when you're in manual mode, but you can - as your visual actually shows. You've answered a few questions I had, so thanks for that.
Thanks for walkthrough! Very helpful and through!
This is so helpful!!! This is my first flash!!! Thank you for the tutorial
Fantastic video! I really needed this.
What a great video. So helpful.
Very excellent presentation and overview. Thank you!
Waiting for my light to arrive, learned a lot already, Cheers, I am sure I will be back.
Excellent tutorial! I needed to know what was TCM for.
Wow, very nice and informative instructions. Thank you.
Thank you for the wonderful tutorial. Great learning experience.
Fantastic tutorial and easy to understand!!
This is so thorough, thank you!
Glad it was helpful!
very informative one of the best tutorial on the flash
Thank you. You’ve helped me so much.
Nice thorough explanation. Tx
Thank you so much for this video. Super helpful. I got three Godox V860IIN Flashes and an X2T. Hoping to do some fun portraits with Nikon Z72. :)
Perfect walkthrough. Thanks. 👋👋
Excellent guide, thank you 🙏
These plus a couple of Godox 32" octagon softboxes were a good fit for my use cases.
This is very helpful. Thanks!
Thanks, that was really informative
Great explanation - thank you 👍
Excellent tutorial!
What a video, I have sean a lot and the was the video that told me just what I needed to know thank you and excellent, it has a lot of tecnical information about the flash
Excellent excellent lesson . You get top score for very little babbling!!!! I’ll be looking for more from you, this is my first time seeing you. Good job well done
Thank you for this tutorial ❤️❤️
Thanks King
Thanks for this super video
Thankyou very much. I was ready to launch this into oblivion,...could not get it work properly, was not reading the focal/zoom ....until I pushed the diffuser back in .5 of a mm and presto .
Thankyou. Owe you one.
Thank´s for a very great video. Hope it also will work for my Fuji GFX.
Wonderful explaination. Thank you 🙏
You're welcome.
Thank you u were great
good explanation :-) Thank you
Excellent. The written manual was not so helpful but this was an exceptional guide for the new user.
great tutorial. Thank you!!!!
Thanks for watching!
Very well explained👍
Thank you 🙂
This was an excellent video of how to use the Godox flash. Straight forward and easy to understand! Thank you!
muy bien video , todo muy claro .. gracias !!!
Thank you 🙂
Thanks!
Thank you
I just bought this and the XproC trigger
👍👍👍❤ Thank you! Subscribed (Colorado).
Danke. Das hat mir sehr geholfen. Eigentlich müsste der Hersteller so ein Video machen. Eine Bedienungsanleitung auf Deutsch, gibt es gar nicht.
Excellent video. Very helpful. Can you recommend a TTL off-camera flash cord for the Fuji XT-3?
I'm considering picking this up, the V1, and the AD200 Pro. Not at the same time. I already have a TT600, and the MS300v
Thank you for this walkthrough. I have the olympus controller and the olympus version of the flash. If i buy a canon version of the flash, will it also be possible to use it offcamera with my olympus controller?
Thx for video. It was helpful. You didn't cover use of led light and power levels with flash. Is this covered on another video?
Sir,
Thanks for the full explanation. It's nice and useful.
I discovered that my Nikon D7000 has a delay of around 1-second flash after I press the shutter button. Have you ever experienced that? I cancelled delay exposure mode and the problem still exists. Do you know what's going on? Thanks.
Hi, very useful and clean presentation. I have been using V1 and expecting to get V860iii in a day or two. The newest Sony cameras like A7Riv and A7RV have in camera body direct flash control for Sony flashes. Do the Godox flash V1 and V860iii are compatible with the same feature where the in body settings can control the flash? Thank you
great explanations, but I'm a bit confused anyway, which mode do I have to use if I want to shoot in afc burst mode for catching animals with my Panasonic S1R, Highspeed sync or RPT?
Debated between the v860iii or the v1 but got this instead;
Great Job. I just got this lash in and while I'm texting it out I notice that it keeps changing from ttl, muilti, and manual by itself. How do I stop this?
Hey, sorry for the late reply. I'm not sure what's going on there. Are you still experiencing this issue? It's not a common thing we encounter, but perhaps the mode button is stuck. If you bought it from us, please contact our support team.
wao, great tutorial, i think you forget to tell LED light power setting
Oh... Good eye! We may have to add an addendum that explains this.
Thank you for the great tutorial. Can the battery be charged via the USB-C port in the flash?
Hi Greg,
That port is for firmware updates only, but the external charger is powered via a USB-C cable so you can take advantage of expanded charging options.
I missed a moment of using the flash during a macro shot of an insect in the field. I later realized that the camera shutter was on electronic shutter. Flash would operate only in mechanical and 1st curtain. You might want to mention this in your next video. Might help viewers using a mirrorless camera.
Thanks for the suggestion! It does come up every once in a while when we get calls for tech support.
Excellent video, I tried to locate your video concerning the firmware upgrade of this flash. Is this video still available It seems that I can't find it...
Hi Kevin,
Our firmware update tutorial is tad outdated now. In fact, the V860iii uses Godox's newer "G3" software, which was not mentioned. However, the process is generally the same, so we hope you'll still find these instructions helpful:
th-cam.com/video/B2ualXhycaE/w-d-xo.html
If you run into any trouble, feel free to contact us by phone or email for additional support.
ধন্যবাদ
Hello, my question is…is there a way to turn off the flash head and only use the modeling lamp???
Thanks in advance 😁❤️
I just bought this flash for my Sony a seven IV however my flash never says I Dash TTL it just says TTL and also I never get the millimeters of my lens showing up even in the automatic is there an adjustment I have to make or do I have a defective flash I’ve tried it with multiple lenses and it never tells me what millimeter lens I’m using all it tells me is what my f-stop is
Is there a way to disable the pre-flash function when using the V860iii as a master on comera? I've noticed it will always fire when using off camera flash and Godox says it's a pre-flash for communications. Do you know if this affects photos in anyway?
At 21:54 how to you get that M 1/4
I want to be able to control the master power while controlling the other flashes
I recently purchased this flash (didn’t get it yet) for the Fuji X-T4 but I have a Flashpoint R2 transmitter (for Fuji), will it trigger the Godox V860 III Fuji version?
Yes it will. Thanks
Very nice delivery, makes everything clear. Company’s tutorial is the worst (white gloves one)
Glad you found our guide helpful!
i just got godox v860 III
but its not firing
there's anythink that i can do with it ?
Note: I've seen reviews that say the new battery has less capacity than the previous version.
The Godox V860iii is not compatible with the settings of in camera body flash control available with newer Sony camera like A7IV, A7RV. The settings called “external flash settings “ under flash settings in these cameras is greyed out when V860iii is attached on hot shoe or connected as off camera flash. Can a firmware update to V860iii be a solution to make it compatible with a very useful function within camera body to use the Godox flash to its fullest potential like the Sony Flashes? Kindly reply
Why are these flashes so complicated to use still ? I think their manufacturers should take a deep look at themselves and for example the Iphone and consider how can they simplify their product. An Iphone is a highly complex device and yet any child could use without looking at any manual.
Well, for one thing, photographers have come up with a lot of weirdly specific things that they like to do with their flashes! We also like to spend all of our money on cameras and lenses. Who has anything left over for a speedlite that features NFC pairing and an intuitive touchscreen interface?
... But hey Godox, if you're reading this, that would be pretty cool.
This one seems like one of the easier models. Considering I'm commenting 10 months in the future
Ditto!!!!
will the V860iii work with the Godox X1T off-camera remote
The instruction book looks pretty thin compared with your great video? Is there other books that pretty well expand the information in a simple way?
Not that we're aware of, but feel free to reach out to us at hello@strobepro.com if you ever have any questions!
When I go back to Manual Mode, I have the TCM, the SYNC, but no S1/S2 and nothing for the 4th button.
Buongiorno ottimo video. Con Il flash GodoxV860III S mi ci trovo molto bene, ma vorrei farti una domanda, quando lo utilizzo in TTL con macchina sony quando premo il pulsante di scatto per ctturare l'attimo che voglio io, il flash naturalmente essendo in TTL fa dei lampeggi prima di fare il lampo definitivo e solo allora scatta l'otturatore, quindi scattando in ritardo di almeno 1-2 secondi.... non becco mai l'attimo che voglio....per esempio in un evento mentre scatto un soggettto che mi sta guardando faccio la foto e qunado scatta lui ha già abbassato lo sguardo e la foto viene come non la volevo io. C'è un modo per ovviare a questo? Oppure sbaglio io ? Dipende dallamacchina Sony? Naturalmente rimandeo in TTL altrimenti bisognerebbe valutare la potenza del flash e poi passare in manuale.... Grazie anticipatamente
When I go to the menu in TTL normal mode, to turn on/off AF assist, I get m/ft, Zoom, STBY, etc.
No AF. (Olympus) Camera is set for C-AF; was in single frame AF.
Does this work with the Nikon Z9? Thanks! - Jon
any idea why autocus light doesnt work for me? Sony Alpha 6300, TTL Mode(not iTTL). Bought the S/Sony Model
Excuse me but the exact same flash has white balance problems I think cause I put my camera as cloudy but it changes after I take a photo you know why..?
That's a new one for us. Can you tell me which camera you are using?