Easy Starter Replacement! Must-watch Guide For Your 2007-2014 Ford Expedition
ฝัง
- เผยแพร่เมื่อ 3 ก.พ. 2024
- In this detailed tutorial, we walk you through the process of replacing the starter on your 2007-2014 Ford Expedition. Whether you're experiencing difficulty starting your vehicle or suspect an issue with the starter motor, this video will provide you with the knowledge and confidence to tackle the job yourself.
From identifying the location of the starter to safely disconnecting the battery and removing the necessary components, we cover each step with clarity and precision. Our expert tips and tricks ensure a smooth and efficient replacement process, saving you time and money on expensive dealership or mechanic fees.
No prior mechanical experience is required, as we break down the procedure into easy-to-follow instructions. Follow along as we demonstrate the tools needed and offer practical advice for navigating common challenges that may arise during the replacement process.
With our comprehensive guide, you'll have your Ford Expedition's starter replaced in no time, allowing you to get back on the road with confidence. Don't let a faulty starter slow you down - empower yourself with the knowledge to take control of your vehicle's maintenance needs. Watch now and embark on your DIY journey to automotive success!
Buy New Starter: amzn.to/3OuwwcG
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them. - ยานยนต์และพาหนะ
Buy New Starter: amzn.to/3OuwwcG
You have been a big help locateing the starer
Thank you for watching our auto repair video that shows you how to replace the starter on a Ford Expedition. Have a great day!
Have a question? Subscribe to the channel, leave your comment let us know you subscribed and I will reply back to you.
I was able to break the top bolt loose with a 1/4” ratchet, 2” extension and deep well socket. That was the right length for me to get past the solenoid and the 1/4” ratchet was short enough to clear the frame rail. You can only loosen a little with this set up until the ratchet is pinned against something else in there and you can’t take it off of the nut. Just break it loose, then use a flexible 1/4” driver. Worked awesome!
I can’t post a picture. So, a flexible driver is like a screwdriver that has a 1/4” driver tip. Instead of a solid shaft between the handle and tip, it’s a tightly wound spring that allows it to bend.
Yeah it is tight but patience helps too. Hope this video helped you out! Have a great day!
Helpful video I went with motorcraft reman not a big fan of reman but best bet I think.
Sometimes yah have to do what yah have to do...lol Hope the video helps you out with replacing your Ford Expedition starter.
Definitely a job done when the engine and exhaust are cold!
Yes, The exhaust manifold it right there too. Once the engine is cooled down you can dive into replacing the starter.