Thank you Honda Land for a Very Nice video. I've thought I'm going to buy a Arduino Uno to change the baud rate of my Bluetooth Module HC-05. Because of your video I've managed to change it just repinning the hulog connector and following all your instructions. Thank You again.
Can't pass step 2. I have two different cables, none of them work. One says Failed to enter AT mode, the other one just does nothing. What I did wrong? It recognizes the COM port automatically but can't connect to it. Thank you for your help! Edit: I got it fixed by change the RX and TX. My bad.
@Honda Land i want to thank you alot for helping me get everything working you when out of your way to help me thanks. now my phone and laptop are connecting no problem and thanks for putting a base map on the SST27SF512 chip, are you selling the bluetooth module yet
its only work hulog cable ? i cant programming universal ttl usb converter sir i programmed bluetooth module parameter setting for 38400 what can i do thanks
Sorry to comment on an older video but once I have the logger flashed can I just put it in the Chipped ECU to log in HTS? Iv been fixing and chipping ECUS but now I am to the point I want to explore fine tuning. Id like to have the chip mounted in the ECU and connect and log with HTS real time
No worries about when the video was made. That's what it's here for. You can put it in and log with HTS yes. You will still need to make changes with a burner but once it is setup you can connect with ease and record logs with no wire
@@CorpseFreak hulogger is a Data logging device. As well as the Bluetooth. Datastream only and not tune changes. To make changes in real time you will need a emulator such as Demon, Ostrich, cobra RTP
@@hondaland_ I wasn't trying to make any changes in real time. I'm just trying to figure out could the huloger be omitted from the setup process of the hc-05. Like could a custom USB be made to program the hc-05 and then once it's flashed put it on the ecu. Then data log through hts and make changes then return the sst. ( I hope I'm not asking stupid questions and I appreciate you taking the time to reapond)
To answer the Question You can not communicate with the HC-05 and just a cable. I made oen so far. Theres something else missing to make the communication. I cant find a driver but I will keep looking
Sir, what would if I maxxed out the baud rate of the HC-05? Thank you. I am looking for a faster communication between the module and my android headunit for tunerview.
The port on the ecu is capped at 38400. Turning the baud of the hc device will make it stop communicating. Try a different device to use tuner view on for a less laggy screen. And also do not buy the cheapes hc device from china. Stick with dsd tech or the ones from moates or boostednw and so on
The one hc05 hooks up to your laptops Bluetooth so only one is needed. A device is needed to talk to the hc05 and change the baud rate to 38400 with AT commands
@@ivailoF1 a wired device called a serial to usb adapter ttl Feel free to go to my honda land Facebook or Instagram to direct message any questions you may have and I will try and help in a timely manner
I have tried this using a HC06 (from DSD tech) with a hulog, following all the steps you have provided. i noticed the HC06 that i have doesn't have the AT button to push. I tried using solder and 2 spare wires to perform the process, but no success. I also couldn't find the bluetooth name for it on either my computer or my phone. Any way you could make a video using a HC06?
06 is the same but no button press is needed and the 06 tab is used in dsd tech app is the only difference. Make sure your com speeds are set to the default number in device manager and the program
@@dmarb17 it should flash when it turns on. Solid red might be defective. I receive about 2 bad units for every 5 I order lately. Kinda a bummer but yeah. If you can find my honda land page on Facebook or Instagram I can help you one on one vs TH-cam comments and show u a quick video of me programming one. I should make a freshened up version of the video as well as all my videos needs a redo since I can add more knowledge into them now then I knew then.
So i was able to program. Plugged into ecu with correct wire diagram, opened tunerview and says conneceted. When i turn on car i get no readings on tunerview. Am i skipping a step?
@@samuelmontejano3815 Test removing j12 jumper. I successfuly datalog with crome, neptune, ectune and hts. Also I dont use the moates hulog, just hook directly a HT-06 bluetooth module.
![[UNCUT] The Loyal Pin ปิ่นภักดิ์ EP.15 (2/4)](http://i.ytimg.com/vi/qbHbshrA1f0/mqdefault.jpg)
Thank you Honda Land for a Very Nice video. I've thought I'm going to buy a Arduino Uno to change the baud rate of my Bluetooth Module HC-05. Because of your video I've managed to change it just repinning the hulog connector and following all your instructions. Thank You again.
Can't pass step 2. I have two different cables, none of them work. One says Failed to enter AT mode, the other one just does nothing. What I did wrong?
It recognizes the COM port automatically but can't connect to it.
Thank you for your help!
Edit:
I got it fixed by change the RX and TX. My bad.
Awesome glad you got it going! Great work at being resourceful!
@Honda Land i want to thank you alot for helping me get everything working you when out of your way to help me thanks. now my phone and laptop are connecting no problem and thanks for putting a base map on the SST27SF512 chip, are you selling the bluetooth module yet
Yes I sell them upon request
How can i connect ht05 with an ftdi
its only work hulog cable ?
i cant programming universal ttl usb converter sir
i programmed bluetooth module parameter setting for 38400
what can i do thanks
Yes you can use ttl usb device to talk to the device to send AT commands to change the setting
I also can't program it with universal cable. Did you get it fixed?
Sorry to comment on an older video but once I have the logger flashed can I just put it in the Chipped ECU to log in HTS? Iv been fixing and chipping ECUS but now I am to the point I want to explore fine tuning. Id like to have the chip mounted in the ECU and connect and log with HTS real time
No worries about when the video was made. That's what it's here for. You can put it in and log with HTS yes. You will still need to make changes with a burner but once it is setup you can connect with ease and record logs with no wire
@@hondaland_ that's what I was hoping to hear. I'm still trying to figure out exactly what the huloger does for this setup. I'm going to watch again.
@@CorpseFreak hulogger is a Data logging device. As well as the Bluetooth. Datastream only and not tune changes. To make changes in real time you will need a emulator such as Demon, Ostrich, cobra RTP
@@hondaland_ I wasn't trying to make any changes in real time. I'm just trying to figure out could the huloger be omitted from the setup process of the hc-05. Like could a custom USB be made to program the hc-05 and then once it's flashed put it on the ecu. Then data log through hts and make changes then return the sst. ( I hope I'm not asking stupid questions and I appreciate you taking the time to reapond)
To answer the Question You can not communicate with the HC-05 and just a cable. I made oen so far. Theres something else missing to make the communication. I cant find a driver but I will keep looking
hi what softwares are you using?bluetooth flasher?link please..thanks
Amazon DSD tech hc-05 is the unit. Honda Tuning Suite is the software. Look up Honda's ECU tuners page on facebook to learn more in the group
Hi sir .Thanks for sharing this helpfull video.How Can l programming and connect ecu with hc06 bt module.
Similar process but hc06 is chosen and then there is no button. Always in at mode
@@hondaland_ l have to change module with hc05.Yesterday ,l bought hc06 bluetooth module:)Hc05 better than hc06
Sir, what would if I maxxed out the baud rate of the HC-05? Thank you.
I am looking for a faster communication between the module and my android headunit for tunerview.
The port on the ecu is capped at 38400. Turning the baud of the hc device will make it stop communicating. Try a different device to use tuner view on for a less laggy screen. And also do not buy the cheapes hc device from china. Stick with dsd tech or the ones from moates or boostednw and so on
@@hondaland_ thank you very much sirrrr
@@argel1224 my galaxy note 8 and 9 are laggy. However my galaxy s5 is smoooooth
@@argel1224 so i find cheaper phones communicate smoother and you dont see the frames dropping
@@hondaland_its probably because the serial port is emulated/virtualized on newer phones
If i understand you use one module HC-05 for the ecu and one for the laptop?
The one hc05 hooks up to your laptops Bluetooth so only one is needed. A device is needed to talk to the hc05 and change the baud rate to 38400 with AT commands
@@hondaland_ Thanks for the information
@@ivailoF1 a wired device called a serial to usb adapter ttl
Feel free to go to my honda land Facebook or Instagram to direct message any questions you may have and I will try and help in a timely manner
@@ivailoF1 links are in the video description
@@hondaland_ i will find you in Facebook
I have tried this using a HC06 (from DSD tech) with a hulog, following all the steps you have provided. i noticed the HC06 that i have doesn't have the AT button to push. I tried using solder and 2 spare wires to perform the process, but no success. I also couldn't find the bluetooth name for it on either my computer or my phone.
Any way you could make a video using a HC06?
06 is the same but no button press is needed and the 06 tab is used in dsd tech app is the only difference. Make sure your com speeds are set to the default number in device manager and the program
@@hondaland_ i'm getting a red solid LED, but nothing when i search for the device on my phone/laptop over BT.
@@dmarb17 it should flash when it turns on. Solid red might be defective. I receive about 2 bad units for every 5 I order lately. Kinda a bummer but yeah. If you can find my honda land page on Facebook or Instagram I can help you one on one vs TH-cam comments and show u a quick video of me programming one. I should make a freshened up version of the video as well as all my videos needs a redo since I can add more knowledge into them now then I knew then.
Hello friend, very nice your video, I would like know if this module HC-05 replace hulog??
It can be used in its place once the speed is set correctly
@@hondaland_ have Instagram?
@@peterle_garage yes link is in description
@@peterle_garage @hondaland88
So i was able to program. Plugged into ecu with correct wire diagram, opened tunerview and says conneceted. When i turn on car i get no readings on tunerview. Am i skipping a step?
sounds like you need to purchase a protocol to match your tune. so ectune or crome in the store section. what software do you use to tune with?
@@hondaland_ purchased the protocol for ectune ISR/HTS. Currently have my ostrich emulator hooked up as chip with crome tune
@@samuelmontejano3815 Test removing j12 jumper. I successfuly datalog with crome, neptune, ectune and hts. Also I dont use the moates hulog, just hook directly a HT-06 bluetooth module.
@@andresgiesenow8190 andres do a video on how you connected and send a link thanks
@@ronyamr11 Sure, what softwares are you using?