Thank you this was very helpful video even if you struggled a bit it’s good to see it could be difficult coming out and just have patience so not to break then you have more problems 😅
Nice job! Getting the old ones out can be really awful. That's part of the reason they changed the design slightly and eliminated the o-ring gasket at the back of the cartridge (it really collects calcification). Good to note that Moen will replace these (and provide new handle assemblies) for life, for the original owner of the fixtures. If you bought a new house with Moen fixtures, you qualify!
Just did mine tonight and seeing this video. Not sure the allen wrench size but mine was a star bit not an allen wrench. It was a pain in the neck to remove that valve out of the valve body.
Hi... I did this cartridge installation today... however, now when I turn on the water it's hot first, half way turn is warm and all the way counter clockwise it's cold water. It should be the other way around. Cold first, warm, and then hot. Did I put the cartridge in upside down??? 🤔
Yes I think so...it's also possible the water lines going to the valve were installed on the wrong side. either way turning the cartridge 180 degrees should fix it.
Thanks, I really needed this video as the directions are not clear enough for my simple mind.
Glad it was helpful!
Thank you this was very helpful video even if you struggled a bit it’s good to see it could be difficult coming out and just have patience so not to break then you have more problems 😅
glad it helped.
Theres a pull tool.
Nice job! Getting the old ones out can be really awful. That's part of the reason they changed the design slightly and eliminated the o-ring gasket at the back of the cartridge (it really collects calcification). Good to note that Moen will replace these (and provide new handle assemblies) for life, for the original owner of the fixtures. If you bought a new house with Moen fixtures, you qualify!
what size screw driver to use in removing screw in handle adapter?
Just did mine tonight and seeing this video. Not sure the allen wrench size but mine was a star bit not an allen wrench. It was a pain in the neck to remove that valve out of the valve body.
Hi... I did this cartridge installation today... however, now when I turn on the water it's hot first, half way turn is warm and all the way counter clockwise it's cold water. It should be the other way around. Cold first, warm, and then hot. Did I put the cartridge in upside down??? 🤔
Yes I think so...it's also possible the water lines going to the valve were installed on the wrong side. either way turning the cartridge 180 degrees should fix it.
👌