How to Replace Camshaft Position Sensor 2009-17 Chevy Traverse
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Buy Now!
New Camshaft Position Sensor from 1AAuto.com 1aau.to/ia/1ACP...
For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes. This video shows you how to install a new camshaft position sensor in your 2009-2017 Chevy Traverse.
• Check here for more videos on the 2009-2017 Chevy Traverse • Chevy Traverse 2009-20...
This process should be similar on the following vehicles:
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ob/1AXA...
• 15mm Wrench 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 18mm Socket 1aau.to/oa/1AXA...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Pick 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy Traverse 2009-2017 1st Generation: • Chevy Traverse 2009-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
He must get paid buy the hour! Remove intake and reach over, same position and same amount of space. Complete waist of time taking all that off
Expert way to remove old cam sensor and install new one, thanks.
Can you guys make a video on how to change the Crankshaft position sensor on a 2010 Chevy Traverse LT?. I can’t figure it out how to do this.
There's another video in Spanish but the guy went up from the bottom had to remove a heat shield
Would this fix my code P0017
Crankshaft Position
Camshaft Position
Correlation Bank I Sensor B, is bank one the front one that you have to remove power steering reservoir.
Thank you for this video. I was able to replace the VVT Solenoid following your steps. 👍🏽👍🏽👍🏽👍🏽
Thats the same way I found this
Is there an easy way to do it without removing all rhe brackets?
What symptoms and codes was given to find that it was the sensor?
Great break down of what needs to be done and how much but for the amount you did, I would have thought you would have done the front 2 sensors also. Just my take
Great video. I have a 2010 Buick enclave with trouble codes p0008. Because the trouble code deals with timing I immediately park my car and it's been sitting for a few months. But after reading on car forums I learned the camshaft position sensor could be the issue. The car starts up runs fine drives normal but drives a little sluggish at times. Sometimes it drives normal when the check engine light is off. I hear no noises. Engine purrs like a kitty cat. So I'm hoping it's just the camshaft position sensors, and nothing major. Car only has 95,000 miles.
What was the outcome?
did you fix the problem?
Which one is bank 1 on the intake side? That is the one i need to replace.
I'm very new to the mechanic world... what was the purpose of taking that plastic cover off ?..... I didn't see a reason to mess with the power steering reservoir neither .... I just took that radiator hose a loose to be thorough... you have easier access to the two on that side without breaking them and replug.. I also had issues with 1 cam sensor underneath that reservoir bracket i just loosened it to give it flex to get my hands on it ...... not sure if this is the best way to do ... but it was for me my very first time ever doing this ....
Total off 6 sensors are in the left side,in being the engine 2 being in the other 4 in the area off the timing chain simple in i see only thing I found to I don't the other code I just fix the want need to be fix in done to get inspection soon thank you 😅
How many sensors are being replaced an which 1s
Are all 4 cam shaft sensors for a GMC 3.6 motor the same part number or are these different parts?
is there another easy way to change the sensor
Yes take the overflow tank off and upper radiator hose loose and the engine upper motor mount loose from the motor.
Yes there is
I can only imagine you are supporting the engine with a jack or something before removing the mount, right? Also removing the mount is not required if the firewall side sensor(s) are the suspect ones. Thank you for the video!
not a mount ,torque strut
i don't believe that is the main engine mount. that one keeps the engine from rocking back and forth as the engine accelerates / decelerates or you switch from reverse to drive. the engine will not fall or drop down.
what year is this Traverse it's not like my 2016 Chevy Traverse Lt AWD
My power train system light has come on. My code is P0340 camshaft position sensor circuit. I have a 2015 chevy traverse. Is this the way to replace it on this video? I thought it would be less work but I’m willing to do what’s needed cs it makes my truck sputter and jerk some
Very good video man thanks really appreciate it.
It’s that code P0017 bank 1 sensor B ?
2008 GMC Acadia code P0391-00 which sensor is the exhaust camshaft position sensor performance bank 2? Please thanks
What's the sensor called between the two camshaft sensors. Mine broke off
Hello bank 1 is to the front of the car?
My code for my 2010 Traverse is P0017, says Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B. Which one would this be?
Same issue, did you find which one it is
From what I understand sensors 1 are on the firewall side and B is the exhaust side, closest to the firewall.
Did changing the sensor fix the problem or did you need to get the timing chain changed? I have a traverse and am getting P0017 and P0008. Thanks
I like how he doesn't say the reason removing all that and especially removing the plastic covers. Looks alote removing things maybe easier from the bottom?
You can't even see them from the bottom.
Damnnnnnn that's an lot 🤨🤨🤨
How often to you have to change all of the sensors
+@aaroncarter6871 The sensors will only need to be replaced if they are deemed defective.
Thank You....
Good video!
Well done
Is the engine being supported? Looks like an engine mount
Why would you need to support it? I've changed that mount a few times and it barely moves when it is removed.
It is a side to side movement mount.
Where is Camshaft Pos Sensor Bank 2.
Error code PO018.
Thank you very mucho for this Video!!
Why not just remove the tire?
Quelle stupide qui a fait cette création de la position des capteurs une vrais honte tout refaire juste pour un simple capteur qui aurais put être mieux positionnés pour le remplacement.
I changed the 4 sensors and it still comes out on the computer and marking chec engine
having similar issues its sucks cuz no one has the cure !!!!
Did you ever figure it out?
I believe they have to use the computer to recognize the new sensors are add up, something I don't see the mechanic mentioned.