Great video! You clearly explained and showed what you were doing with each step. It's funny how this can be done by one person with a socket set and an hour of free time once you know what to do.
I’ve got a friend I’m helping install hot locks flam kit. Would you happen to know what wire is the positive ignition coil wire/color and where it is??
MAF sensor has 2 phillips head screws and 1 connector; Find this on the intake just after the filter box. O2 and AFR sensor connectors are to the right of the engine bay fuse box, on the engine block, near the radiator hose. O2 sensor is the black connector and can be accessed from the passenger side wheel well. AFR is the grey connector next to the O2 and can be seen on the manifold/header.
Great video! You clearly explained and showed what you were doing with each step. It's funny how this can be done by one person with a socket set and an hour of free time once you know what to do.
I'm experiencing this exact situation. Ordered the coils and will try this weekend to get my car back to it's normal state.
Did you fix the problem?
@@opiaceo i did! Sorry that I never gave an update but the video helped me out a lot!
Lots of super informative stuff, thanks a ton 🙏
I’ve got a friend I’m helping install hot locks flam kit. Would you happen to know what wire is the positive ignition coil wire/color and where it is??
I have p219a p119f and p119e and cylinder 1 misfire. New spark plugs, new coil, new maf, new o2 sensors and i dont know what to do :( 2013 scion frs
MAF sensor has 2 phillips head screws and 1 connector; Find this on the intake just after the filter box. O2 and AFR sensor connectors are to the right of the engine bay fuse box, on the engine block, near the radiator hose. O2 sensor is the black connector and can be accessed from the passenger side wheel well. AFR is the grey connector next to the O2 and can be seen on the manifold/header.
thank you for the DIY video!
Appreciate this !! how have they held up?
I did not have any problems with these coils.
Hi there, I’m experiencing P0302, P119F & p219A and tapping sound. Could that be a rod knock or anything in the crank?
Can you figured out?
Is coil 1 same as coil “A”
Is coil one coil “A”?
Nice Vid!🤙🏻 and btw, They Shown off the new Toyota GR86! If u didn’t know?
Thanks, yes I'm likin the new GR86 and I think I need one!
Most of the time, the ignition coil boot is the problem. U can save some more if u try to replace the boot only