MAKING PARTIAL DENTURE WITHOUT CLASPS- ALL STEPS AND INSERTION 4K
ฝัง
- เผยแพร่เมื่อ 19 พ.ค. 2022
- In this video i am making a partial denture without clasps aka flipper. the most important thing when making this type of partials is that everything must accurate from impression to designing to waxing and also using some of the friendly undercuts to gain good retention.
enjoy watching and please consider supporting this channel by subscribing and aharing the channel for more videos.
--------------------------------------------------
في هذا الفديو راح اوضحلكم شلون اسوي البارشال بدون ضامات او كلاسبات. اهم شي يجب الانتباه له في صنع هذا النوع من البارشال هوه او يكون كل شي وكل خطوة بمنتهى الدقة إبتداءً من الطبعة الى التصميم الى التشميع والي استخدامات الاندركت البسيطة للحصول عل الثبات. النتيجة كانت رائعة جدا. اتمنى تستفادون من الفديو.
نرجوا دعمكم للقناة بمشاركة الفديو والاشتراك في القناة للمزيد من الفديوات - วิทยาศาสตร์และเทคโนโลยี
Thanks!
Thank you so much! I appreciate it!
I never knew there were so many stages to the process! Fascinating video, a craftsman at work! Wow.😁👌
Thanks for watching
Just if I could afford them. Amazing watching the process.
Thank you for watching and best of luck
This was very interesting to watch, a lot of steps to making a partial.
It’s sure is. Thank you for watching
I'm going in couple of weeks to have 3 front teeth checked. First timer, after doing nothing for 10+ years, this looks ideal. I also need a couple on the side which I had no intention of doing, but after watching this, i may consider, if it's done like this. I will show my dentist this, curious to see what he'll say. From New Zealand.
Let me know what they think. Best of luck
Yeah, I will. My appointments, on the 30/11/23, and by the way, a really, nice job too.
Thank you all for joining! If you have a question leave it in the comment section and I’ll get back to you ASAP. Please consider supporting this channel but subscribing
Question for waxbae or anyone who might have a solution. We are getting a thin acrylic film on the teeth during process. Any ideas on what's causing this and how we can fix this problem? We are using the packing method
Wow those are just like the ones I have, having lost my two front teeth as a child I have got that same dentures, they’re just great without wires, thanks for showing how they are made .❤
Thank you for watching. I appreciate it
As i may ask can you talk properly or eat with them😢
Now that's how its done the right way!
I appreciate it!
Quality art work, remind me of my work for semiconductor in Silicon Valley.
Thank you for watching! I appreciate it
All I can say is, wow excellent work . Now I just have to come up with the dinero.
I appreciate it! Thank you for watching
Um verdadeira obra de arte parabéns 😮
Thank you! I appreciate it 🌹
WOW AMAZING I HAD THESE KIND OF PARTIALS DONE 23 YEARS AGO ON A VISIT TO CUBA AM SO GLAD THESE PATIALS ARE DONE ON THE US AS WELL THANKS
I'VE ASKED MY DENTIST IN MIAMI FL. IF THEY CAN DO ONE LIKE THE ONE I BROUGHT FROM CUBA CAUSE IT JUST HAPPEN THAT MY DOG DESTROIDED THE ONE I BROUGHT FROM CUBA BUT SHE SAID NO 😔
Makes perfect sense now why they are so expensive
It’s a lot of steps and stages indeed
Amazing brilliant job well done 👍
Thank you for watching 😄
عمل رائع شكرا جزيلا أخي
شكرًا على المشاهدة
Thank you for this video and the amazing work you did, you are a sweetheart I would like to help people in need ,😊
Thank you so much for the kind words, much appreciated!
Wow so mush more for important details to denture structure, beautiful work!
Waxbae where are you located? Can an order be sent to you from USA?
Thank you! We are located in Canada and it’s quite difficult to work with orders from the US as we obligate to provide the after care for the patients
Amazing work
Thank you! I appreciate it
Great work.
Thank you
Wah ji wah very nice 👍
Thanks for watching
Bravo, excellent travail. 👏👍⭐⭐⭐⭐
Thank you for watching! 😁
Wow! I'm so impressed how they do that... So much effort and it's really done well... Good job!!! 👍😊
Thank you so much for watching! I appreciate it
活动义齿我做了21年了
فنان اكثر من رائع شو هاد يعني ابدعت ياباشا
شكرا الك عل المشاهدة
simply the best 🤟🙌
Thank you for watching I appreciate it
EXCELENTE TRABAJO MAS QUE NÍTIDO SALUDOS DESDE ECUADOR
Gracias ☺️
Great work
Thank you 😊
Wow! Amazing work! Very talented.
Thank you for watching 😊
Absolutely amazing! Thank you so incredibly much!
This may sound odd but do you know if the Ivoclar ivobase dentures / denture material is gluten free?
Thank you! That’s not an odd question at all, traces of Gluten can be found in some MMA (methyl methacrylate) dental products and it’s the same material that some manufacturers use to fabricate acrylic teeth and base material now whether the type of teeth or material we use has or not I’m no so sure about that.
@@WAXBAE wow! Thank you so incredibly much! How did you find this out? Google search?
Travail d artiste 🧑🎨👌
Thank you for watching
مبدع 🤩😍
شكرًا ☺️
Excellent videos!
You would be the best dentist I am sure of it !
Do you have a video where you explain what kind of partial dentures do you have and in which scenario is one suggested?
Thank you so much! I’m a dental technician not a dentist but I appreciate it.
I have few videos of making claspless partial maybe they worth having a look
Thank you for this excellent video!!! I enjoyed watching the step by step process of making it. I wanted to ask you what you're relying on for retention when it comes to RPDs without a clasp? I recently made an acrylic only RPD (no cast metal frame) with 2 wrought wire clasps for my patient in dental school and the retention was okay but not the greatest!
Nvm lol I just read your reply to another comment about the retention after writing this :)
Lol thank you for watching 😃
And very good work by the way! I've learned some very helpful techniques from you!
Thank you for watching, I did answer you on the live video but I’m not sure if you’ll be able to see it after the video ended.
@@WAXBAE I didn't see it. Can you help!
you are an artist
Thank you 😊
عاشت ايدك 🤲♥️
شكرا ☺️
Bravo bon travail👍🌹
Thank you for watching
You are an artist.
Amazing work.
Thank you sir! I appreciate it
Belo trabalho. Parabéns. Abraços do Brasil.
Tha is for watching
Wow, Great work)))
Thank you 😊
Amazing work!!!
Thanks!
Отличная работа коллега!
Top man as always)))
Thank you I appreciate it
Excellent❤
Thanks!
nice
I love your video, I would like, which is the acrilyc mark did you use?
Thanks! It’s Ivocap
Awesome!
Thanks for watching
Do you have a video of making one without using injection and using acrylic powder and monomer? Nice video btw.
Unfortunately I only use injections methods at the time. Not sure how well it would fit without clasps if processed in the conventional way though. Thanks for watching
hola que aparatos usas para inyectar el acrilico y la marca del acrilico m gracias estupendo video
It’s called Ivocap by ivoclar. Thank you for watching
@@WAXBAE MUCHAS GRACIAS ,SALUDOS DESDE MEXICO
Where are you located? I’m going to need an upper and lower soon. These look great! Lots of hard work- it’s an art😉
We are in Canada
ماشالله عليك ، لوسمحت نوع المشين و اسم طريقه حق وضع الاكريلك
اسمها Ivocap. شكرا عل المشاهدة
Rapaz num.pedasinho de Se o cara paga carro em.kkk r tá doido .pensei que era mais difícil.com mais tecnologia. Nas ficou bom.
Valeu😊
Thanks for watching
This is the best teeth , i Like this to learn 😂
Thank you for watching
Buen. Trabajo
Thank you for watching
Thanks
Thank you! I appreciate it
Very nice
Thanks for watching
Great work, thank you for sharing the technique of the silicone. I have a question, how does it hold without clasp? Is the material semi flexible or plain acrylic. ? Thank you. Love your work.
It’s hard acrylic, in the description I mentioned what’s important for retention
Thank you got it
They don’t need wire if fitted correctly,
Suction. Very strong .Take some getting plate out.
I had similar but not front teeth.Plate with 4 teeth added .
Saya akan mendukung trus vidio mu
Thats is good work,can ireturn my one month denture which is allergic
I think you have to contact the place where you made them and have that discussion with them. Best of luck
It might be helpful for a lot of your viewers if you would make some videos about repairs, add-ons, relines and wire bending
I do have one repair video but you are right I need to do more hopefully next video
@@WAXBAE you know, “re-attach 7, add 14, w/w clasp 15, reline, by 4:00” Something like that.
Thank you for the video!
What is the injection material? Can I have the brand name?
Ivocap
فيه عيادة ممتازة و استفاد منها الكثير من الناس اتمنى الشفاء العاجل للجميع
شكرا
Х
Can you do this with molars on each side for the bottom? The rest of the bottom teeth are great❤
Yes but after evaluating the health of natural teeth and see if a claspless flipper would work. Each person is different
Thank you
You’re welcome
Thank you. Is there a way you can do a few teeth for bottom jaw? Where abouts are you located please and how can i get in touch?
Where are you located?
Uk
How retentive are they when patient eats with it? Do they need to use a lot pf poligrip? Thank you.
Most of the cases they are pretty retentive but every person is different because retention depends on many factors
اكدر اسوي طقم جزئي من برايمري امبرشن فقط؟ لو الا فاينل امبرشن كاست
الحجي بيني وبينك كل شغلنا عل الطبعة البرايمري 😂 يعني اكيد لازم تكون مظبوطه ونظيفة
Are porcalain teeth more expensive as apposed to acylic teeth. I didn't like the way acrylic teeth did not discolour when I drank red wine. Can you have partials made with porcelain teeth?
I doubt that many places still use the porcelain teeth for dentures and especially partials. Best of luck
ابداع ..سلمت يداك
شكرا لينا
😮 wow . Do you make them for other like this
Every single person ofc
I have question,if the gum been trimmed little to much so it cause has gap between my real teeth and denture can that be fixed?
Thank you in advance
Yes you could fill it later with cold cure acrylic but it may not look as defined as the initial carving
عمل رائع . كيف وصلت الى هذه المرحلة من الابداع في عملك وما النصيحة التي تقدمها لطالب مثلي😅😁
١٣ سنة من العمل وقبل الجامعة كنت اشتغلها ايضا.
النصيحة هي كثرة العمل والدراسة
@@WAXBAE شكرا جزيلا
+كثير فرحت من شفت لهجتك عراقي… فخورين بيك
I have upper partial dentures with no metal fittings....they don't do them in the uk but it also won't hold by itself without adhesive i lost most of my back teeth and a front side tooth😖😖
I guess its different depending on what country you live in etc though....
Preciso muito de usar uma dessa mas por enquanto não tenho condições...
Best of luck
So where do we get the custom mouth mold to make the flipper?
It’s either sent by the dentist or we take impressions when the patient visits. Thanks for watching
any links to source materials? I would love to try this as an artist it would come in handy.
Some of the materials are only sold to professionals but you can try online
What tool do you use to smooth the denture down please?
For the wax stage I use flames and for the acrylic I used pumice compound
ليش اخذنا طبعه للتشو بليتل نكدر بدون نخلي واكس ونسويله ادبتيشن لو شنو الإجراء الاصح
شنية هاي تشو بليتل ؟
@@WAXBAE palate الهاه
I am wondering if you can build a lower jaw
Ofcourse
ممكن نركب جسر متحرك عند فني أسنان.....بدون زيارة دكتور أسنان؟؟؟شكراً.
حسب قوانين البلد احيانا ممكن واحيانا لا
Hi there. what the name of the liquid you used before you trim it.
The ultrasonic solution?
ممكن استشارة طبية دكتور ناجي
اسف لا نقدم استشارات طبية بحكم طبيعة العمل كمخبري
هل هذا النوع بدون مشابك لا يؤثر على بقية الاسنان
و ما.مدى تباثه
ثابت إذا كانت بقية الأسنان صحية وثابته
@@WAXBAE نعم صحية و تابثة ولكن اريد اعرف هل يؤثر على بقية الاسنان ام لا
what is the cost for a partial you made in this video
عملت طقم اسطناعي لاسناني العلويه الاربعه وعندي صعوبه بتأقلم معه أحس ان هنا ك شيء داخل فمي لا أستطيع تكلم براحه ولا الأكل بماذا تنصحني🥺
ربما مع الوقت تتأقلمين
التأقلم يحتاج الى وقت
شكرا لكم على النصيحه انشاءالله يارب نوالفه
@@WAXBAE ونقظر نمضغ عليه ميصراله والو نخاف لايتكسر ولا يطيح
Perseverance , you WILL adapt …
only one question can you eat safely ?
Ofcourse!
👍👍👍👍👍
Is this flexible denture
No it’s hard acrylic
How do they stay put and down fall down? Thanks
By suction, when there is a perfect fit, it stays in place during mastication
@@WAXBAE Thank you, are they more expensive that having clasps?
It’s SOOOO IMPORTANT to get the BITE CORRECT! I have chronic TMD and a millimeter off can send me many headaches!
I just went to see a dentist today for my concerns and he said a “ flipper” could be made but for temporary. This is the final product ISNT it?!
You’ll have to ask your dentist about that
Can you make the nylon ultra thin without all that plastic covering the roof of your mouth?? You can't taste or talk well with it, impending the roof of the mouth so much.
Hard to judge just by talking. Every case is different
Same as I do.
🙌🏼
What if you want to make it at home but don't have all those instruments?
It won’t be good and possibly dangerous
what about retention without clasps ?
It’s different for each case
سؤال بلازحمة انت طب اسنان لو صناعة اسنان
صناعة
фиксация протеза за счет чего ? no fixihg in the mouth
Thanks for watching
Bonsoir
how much is the cost of that sample?
It’s not a sample, it’s called a flipper
I got the one with the clamps I hate it don’t like the way how it sit in my mouth need the real 1 crown inserted they think $1500 can just fall out the sky land to them it’s not easy when needing dental work done
Sorry to hear about your experience. Where did you get that work done?
@@WAXBAE,ihate mine coz is even allergic can ireturn it for another one
🕺❤❤❤❤❤
Shade of natural tooth is different from the pontic
Thanks for watching