Had my CDL 10yrs ago and my company just asked me to drive an 18 wheeler to a job site cuz I mentioned that I had the license lol I don't have it anymore so this video just refreshed me on the shifting. I know how it's done but I still needed to see it done. Wish me luck gents
You shift so smooth, today i drove a standuard semi for the first time ever at my trucking school. Shit was nerve racking, grinded the shit out of my gears and clutch. I need to really time it
i was in the same boat. i practiced in a standard truck at my warehouse in the yard while i was getting my cdl. it takes practice. funny enough i actually was able to float the gears easier then double clutching. back then i had a manual transmission car but my car had synchro on the manual trans, the truck didn't.
Oh man, I think this is exactly what I needed, thanks. Downshifting had me in a weird spot as I hadn't thought to give it gas while shifting to a lower gear.
Today I got behind the wheel for the first time .. I was getting confused with the double clutch . I can drive standard but the double clutching was throwing me off . Tomorrow I’m gonna say clutch nuetral clutch gear instead of 1- 2 ..the way they were telling me .. Great video ..
Yeah man same here I've drove a straight for years but just now getting in trucks and the double clutch is throwing me off major can run thru all my gears going up but coming back down them is a different story lol
it took me 5 minutes to get it down after being taught it in school. yeah i occasionally had issues after but its really not that hard. then once you pass your test you can just float gears
Now I understand why when I drove an older Navistar (no synchros) why when I downshifted why the gears would always crash and I'd have to stop the truck and start all over? I never knew to blip the throttle in the neutral clutching shift to speed the transmission gear shaft to speed up with the engine's. I have never had any trouble shifting cars, pickup trucks etc. before, just the big Navistar 30 foot box truck that I had rented. Great teaching video.
I Wish I had an instructor this through & detailed... Not 15-20 seconds then getting in the driver's seat. I'm not surprised why alot of folks are going to automatics. I bet it saves a lot on clutch wear with newer drivers
This only makes real sense when demonstrated on a truck, like you are. I used to drive a 1976 Bedford TK horsebox and this shows what I had to do if I wanted to get it to down shift. Most people demo this on cars, and the revs die away so fast that they are engaging the clutch the second time with the revs down to idle. I never used it on up shifts, just rev matched and often didn't use the clutch. If you get it right then even though the it was a crash gearbox there was no grinding. I almost never ground the gears. On the down side, it would only exceed 60mph on a long downhill.
Great video!! New school driver here and I”ll be learning by watching video, because my “teacher” didn’t teach me or explain to me almost nothing. It’s gonna be difficult, but I am going to learn online 😂
Same as here my dad teach me 15 years ago with our old pick up which is manual gear driven and cant downshift without double clutching and give fuel. Thank you dad
Thanks for the great tip, first time doing it today, had an instructor that yelled at me Big Time for not getting the double clutch. What a Negative Experience….
Question: Everytime i hear a old truck why do i keep the engine roar a bit then quickly revs up until next gear and do it again such as the video i saw about Iveco Turbostar Passing at 160 km/h
@@GreatMewtwo Dude, if your car doesn't have synchronized gears, which is 1950 technology, then you've gotta reconsider whether you should be driving your car. Furthermore, my audi a3 is still kicking strong after 520k kilometers on it, the transmission has never been changed.
I'm old enough that I know how to double clutch. I lived in a van with a 3-speed crash box (no synchro in any gear). I never worried about anyone stealing it because I knew if they didn't know how to double clutch they would never even get it into 1st or reverse, let along up-shift or down-shift.
So are you saying the average person who drives automatic would not be able to shift it into 2nd gear bec it requires double clutch? Sorry just a little confused.
Why do you have to double clutch for up-shifting? The gear speed should sync automatically since it just has to let the revs decrease to the synchronic speed.
Well if you want your CDL you have to double clutch or you won’t pass your road test, this guy is teaching students how to do that. Now in your own truck, you do what you want. I’m pretty sure most drivers float gears.
@@emkayusa I understand that double clutching is part of the test for driving, but it is a pointless skill to learn. Not only have driven 2 million miles, I've also been the head mechanic in truck shops and there is no logical reason for double clutching in modern trucks. Ive never seen mechanical failures due to not using a clutch and floating a Trans into a gear,, but have seen more damaged caused by improper clutching than I care to remember. I've seen clutch brakes exploded because drivers press the clutch to the floor while moving because they never learned to get a truck back in gear if you miss a gear. You have to have your rpms correct double clutch or not. I can double clutch if I were to be required to take a driving test, but double clutching is a practice whose time has passed and I've driven some pretty old trucks and I'm not certain it was ever nessicary. This isn't a criticizem of the guy in the video, but the state requiring double clutching without being able to give you a reason for it is like other things when we ask why. Because that's how it's always been done. These are not 5 X 4 transmissions these days that you use both hands to shift, or worse yet the 5 X 3 triplex I had in a couple of old silver dog Macks.
@ffhgu 07 they still shift just fine without double clutching. Double clutching is a skill required to pass the test that has no mechanical use for using. Your RPMs and speed has to match whether you double clutch or not. I know people who double clutched for the last forty years and those who never touch the clutch and double clutchers always need their clutches adjusted it seems and those like me who drove one truck for 600,000 miles without ever adjusting the clutch on a 25 miles rt short haul. The average round trip load required 105 shifts per load, and took about an hour. That's over 1000 double clutches per day. If nothing else you wear out the friggin linkage clutching that often.
OHHHHH THATS HOW YOU ACELERATE AND CLUTCH-. I was thinking you accelerate and clutch ONLY in downshift numbers like 1 to 5 lol not when you downshift COMPLETEY
The double clutching is way outdated. We never use the clutch. Only start moving at red lights, after that no use at all. And I drove 9, 13 and 18 speed transmissions. Kenworth, piterbilt, Detroit, no clutch needed.
If this is so smooth why is he grinding gears like that? If you have the timing right you dont need the clucht at all part from taking off and stopping! Its all about timing the rpm. A semi is a breeze wen really ggod you can even do it with a car, but I don't recommend it. Plus it's alot less effor to just rev match and alot faster!
What idiot doesnr understand to push the clutch fully down, switch gear, and let go of the clutch again? Why do americans need to make the use of manual transmission overly complicated for no reason, except extra wear and tear on the clutch?
Older transmissions require you to double cluch due to the lack of syncros or bad ones. I have a saxo vts track car with a dog box - no syncros - when you are pushing it you dont need to use the clutch but driving it on the road you need to double clutch it mostly on downshifts. Much better for the gearbox and much smoother with a dogbox.
Man you are grinding the gears and your truck shakes and jerks when you are shifting, you are not mentioning your speed and your RPM before you shifting. bad video
Because when he trains, he teaches you to shift by speed, not rpm. i had him as an instructor and trust me, I got my CDL on first try. Don't be mad that you didn't get yours lol.
This guy was my instructor, and he was the most detailed and visual instructor. I have my CDL's thanks to this guy :) Thanks Grizz!
Best I've seen.
Super jealous then. My instructors are amazing don't get me wrong, but love the way he teaches. So calm and that helps alot.
@@Piecesofme77 would you say that knowing how to shift in a normal manual car helps a lot in learning how to drive for a manual CDL?
Was shit he still is mine. Hes teaching me right mf now😂
For real? The longer I watched this, the more questions had. Why did he skip 2nd and 3rd gear? That wasn't explained.
"clutch neutral, clutch gear". I'm gonna be thinking this in m head while shifting for a while 😂. Great video
Had my CDL 10yrs ago and my company just asked me to drive an 18 wheeler to a job site cuz I mentioned that I had the license lol I don't have it anymore so this video just refreshed me on the shifting. I know how it's done but I still needed to see it done. Wish me luck gents
You shift so smooth, today i drove a standuard semi for the first time ever at my trucking school. Shit was nerve racking, grinded the shit out of my gears and clutch. I need to really time it
😂
i was in the same boat. i practiced in a standard truck at my warehouse in the yard while i was getting my cdl. it takes practice. funny enough i actually was able to float the gears easier then double clutching. back then i had a manual transmission car but my car had synchro on the manual trans, the truck didn't.
Oh man, I think this is exactly what I needed, thanks. Downshifting had me in a weird spot as I hadn't thought to give it gas while shifting to a lower gear.
My instructor always said "slow down to speed up, and speed up to slow down" he also got on me for "thinking"
@@phatpac5 oh I like that, I think I'm going to use that.
THEE MOST helpful video I've seen. Thanks.
Today I got behind the wheel for the first time .. I was getting confused with the double clutch . I can drive standard but the double clutching was throwing me off . Tomorrow I’m gonna say clutch nuetral clutch gear instead of 1- 2 ..the way they were telling me ..
Great video ..
Yeah man same here I've drove a straight for years but just now getting in trucks and the double clutch is throwing me off major can run thru all my gears going up but coming back down them is a different story lol
Seems easy enough until you actually try and do it.
there is no way i could do that i have mad respect for every driver out there and in trucking in general
it took me 5 minutes to get it down after being taught it in school. yeah i occasionally had issues after but its really not that hard. then once you pass your test you can just float gears
@@jfraz_7720hard to belive for a begginer, 😅
@@astroskiesmost truckers float gears but when ur in school u gotta double per dot regulation
Right, 😅
I always end up granny shifting instead of double clutching like I should
Finally someone that explains in very good detail very good video.👍🏼
Thank you so much, I have looked at so many videos and no one explained it like you
Not even my cdl instructors did
Exactly what
I was thinking
Now I understand why when I drove an older Navistar (no synchros) why when I downshifted why the gears would always crash and I'd have to stop the truck and start all over? I never knew to blip the throttle in the neutral clutching shift to speed the transmission gear shaft to speed up with the engine's. I have never had any trouble shifting cars, pickup trucks etc. before, just the big Navistar 30 foot box truck that I had rented. Great teaching video.
I Wish I had an instructor this through & detailed... Not 15-20 seconds then getting in the driver's seat. I'm not surprised why alot of folks are going to automatics. I bet it saves a lot on clutch wear with newer drivers
This only makes real sense when demonstrated on a truck, like you are. I used to drive a 1976 Bedford TK horsebox and this shows what I had to do if I wanted to get it to down shift. Most people demo this on cars, and the revs die away so fast that they are engaging the clutch the second time with the revs down to idle. I never used it on up shifts, just rev matched and often didn't use the clutch. If you get it right then even though the it was a crash gearbox there was no grinding. I almost never ground the gears. On the down side, it would only exceed 60mph on a long downhill.
Straight and to the point my man,
Thanks for the video very helpful
Wow phenomenal instruction I’m tryna learn dubble clutching to show off to may auto driving friends so I appreivate the vid
Sir I just scored my next gig because of this video thanks man
That was REALLY helpful! So my grinding is ok 👍
Great video!! New school driver here and I”ll be learning by watching video, because my “teacher” didn’t teach me or explain to me almost nothing. It’s gonna be difficult, but I am going to learn online 😂
Thats a nice sounding freightliner! 1:56
yea whats in that thing sounds mean
I like the way he's playing the turning coming out to the yellow line and then making a turn.
playing?
Very Good Video! I'm considering getting my Class A and I enjoyed this video.
Love that he's got a skoal tin in his pocket too XD That's real truckin
my Dad taught me how to drive our 80s Toyota Pickup 5 M/T
this is exactly how he teaches me. 😮
Same as here my dad teach me 15 years ago with our old pick up which is manual gear driven and cant downshift without double clutching and give fuel. Thank you dad
Bit pickup trucks have sinchronisers, you don't need to double clutch it. Just press clutch and change gear
Every trucker needs to watch this guy so they can learn to get the hell out of the way
Iv watched a lot of videos great way of explaining double clutch
I love the *grind* *clutch* *shift* at 0:21
Thanks for the great tip, first time doing it today, had an instructor that yelled at me Big Time for not getting the double clutch. What a Negative Experience….
Double clutching looks cool!
🙏🙏🙏🙏 thank you 🙏 so much you change my life you made it so easy !!!🥰🥰🥰
I went on the road in a semi for the 1st time yesterday. Needless to say it was very stressful. I am going to say clutch neutral clutch gear OUT-LOUD!
This is the best shifting lesson ever recorded
Thanks for demonstration good video
You rock bud keep up the good sh*t!
Great video man. Was very helpful
Question: Everytime i hear a old truck why do i keep the engine roar a bit then quickly revs up until next gear and do it again such as the video i saw about Iveco Turbostar Passing at 160 km/h
Amazing explanation thank you
I just went on the road for my first time in school and it was god aweful. Thanks for the help
The gearbox cracks a lot
I gotta try this on an old bucket truck we have in the Air Force reserves. I feel like you have to double cluth to just shift up
Helpful
He makes it look easy 😂
Sick ass grind on the lower gears 😂
Do you still teach this and what city and state?
Yeah goes smooth when you're bobtailing
Can I ask why I need to do this sh*t? Driving a manual is annoying as it is, double clutching everytime feels like a nightmare
This is primarily done to smooth out the shifts and reduce wear on the gearbox, especially when it doesn't have synchronized gears.
@@GreatMewtwo Dude, if your car doesn't have synchronized gears, which is 1950 technology, then you've gotta reconsider whether you should be driving your car. Furthermore, my audi a3 is still kicking strong after 520k kilometers on it, the transmission has never been changed.
@@GreatMewtwo And I'm somewhat putting a heavy load on my transmission as I always engine break to at least third gear.
I learned how to do this yesterday and I was grinding gears so bad and getting yelled at by my instructor.
Quick question. How many RPM do you need to shift up amd down? Anyone help with this please. Thanks
All I know is if someone would shift my truck like that, I would say look your not going to do that again!
Double clutch bus riding down the street
Lmmfao
Right on 🤙
I'm old enough that I know how to double clutch. I lived in a van with a 3-speed crash box (no synchro in any gear). I never worried about anyone stealing it because I knew if they didn't know how to double clutch they would never even get it into 1st or reverse, let along up-shift or down-shift.
So are you saying the average person who drives automatic would not be able to shift it into 2nd gear bec it requires double clutch? Sorry just a little confused.
@@Joey71420: The average person who drives automatic probably wouldn't be able to get it in 1st or reverse from a stand still, let alone 2nd gear.
I’m only gonna get this if I get those awesome tattoos!!!
Do you check your rpms?
This video about to take off
Why do you have to double clutch for up-shifting? The gear speed should sync automatically since it just has to let the revs decrease to the synchronic speed.
You dont have to double clutch any of it you can float all of it.. Its all about the rpms.
Well if you want your CDL you have to double clutch or you won’t pass your road test, this guy is teaching students how to do that. Now in your own truck, you do what you want. I’m pretty sure most drivers float gears.
@@emkayusa I understand that double clutching is part of the test for driving, but it is a pointless skill to learn. Not only have driven 2 million miles, I've also been the head mechanic in truck shops and there is no logical reason for double clutching in modern trucks. Ive never seen mechanical failures due to not using a clutch and floating a Trans into a gear,, but have seen more damaged caused by improper clutching than I care to remember. I've seen clutch brakes exploded because drivers press the clutch to the floor while moving because they never learned to get a truck back in gear if you miss a gear.
You have to have your rpms correct double clutch or not. I can double clutch if I were to be required to take a driving test, but double clutching is a practice whose time has passed and I've driven some pretty old trucks and I'm not certain it was ever nessicary.
This isn't a criticizem of the guy in the video, but the state requiring double clutching without being able to give you a reason for it is like other things when we ask why. Because that's how it's always been done. These are not 5 X 4 transmissions these days that you use both hands to shift, or worse yet the 5 X 3 triplex I had in a couple of old silver dog Macks.
@ffhgu 07 they still shift just fine without double clutching. Double clutching is a skill required to pass the test that has no mechanical use for using. Your RPMs and speed has to match whether you double clutch or not. I know people who double clutched for the last forty years and those who never touch the clutch and double clutchers always need their clutches adjusted it seems and those like me who drove one truck for 600,000 miles without ever adjusting the clutch on a 25 miles rt short haul. The average round trip load required 105 shifts per load, and took about an hour. That's over 1000 double clutches per day. If nothing else you wear out the friggin linkage clutching that often.
Any vehicle with stick shift can be driven without using the clutch. Even at a red light. No clutch needed at all
0:23 😳
Haha whoops
It's like playing a guitar it's all about your timing
After a few more views, I should become more confident about how this works, thank you.
Why is it important to double clutch?
I double clutch up gears but I do a half ass double clutch downshifting more of a single clutch
I am Rachid 49 yo I am arab top truck driver and I would love to have friends
Grizzly snuff in the pocket
Yum
Why fuel on downshifting?
Coz you need high rpm to get in a lower gear
Floating gears is better in my opion , but every truck, & drivers is different
I just shift by pressing the clutch once and change gears then release clutch
Is he fully double clutching when he’s half way on the pedal isn’t this floating but with the nuetral part
No this double clutching, floating you only use the clutch to start or stop
3:09 he ground the gears into 4th
Anyways, 18 speed transmissions are not really 18 speed. They split the gears. 1.5.. 2, 2.5.
I know how to flloat but my school is making us double clutch so is like learning how to drive manual all over
Thanks
its a lease. keep grinding
OHHHHH THATS HOW YOU ACELERATE AND CLUTCH-. I was thinking you accelerate and clutch ONLY in downshift numbers like 1 to 5 lol not when you downshift COMPLETEY
Thank you Grizzly
The double clutching is way outdated. We never use the clutch. Only start moving at red lights, after that no use at all. And I drove 9, 13 and 18 speed transmissions. Kenworth, piterbilt, Detroit, no clutch needed.
0:56 he pushed the clutch in too far
Thank you
If this is so smooth why is he grinding gears like that? If you have the timing right you dont need the clucht at all part from taking off and stopping! Its all about timing the rpm. A semi is a breeze wen really ggod you can even do it with a car, but I don't recommend it. Plus it's alot less effor to just rev match and alot faster!
Get your foot OFF of the clutch
I’m in my az course and fuck it’s harder than it looks
Just wearing out your clutch pads in your clutch springs
but you need to double clutch to get your cdl
In order to pass your CDL test, you must double clutch
Its meant to be used?
Floating is best if you know how to do it. If not I’d much rather replace a clutch any day over a transmission.
It's a non synchronized transmission, The manufacturers recommend double clutching every gear up and down
He is not as good as he tries to pass.
Just like they say: “ if you can not do it go ahead and teach it!”
Thanks anyway!
but why
What a mess
What did he do wrong? I'm about to be in trucking school.
Lol
Double clutching is unnecessary so why teach it?
At the road test you gonna need it.
What idiot doesnr understand to push the clutch fully down, switch gear, and let go of the clutch again? Why do americans need to make the use of manual transmission overly complicated for no reason, except extra wear and tear on the clutch?
Older transmissions require you to double cluch due to the lack of syncros or bad ones. I have a saxo vts track car with a dog box - no syncros - when you are pushing it you dont need to use the clutch but driving it on the road you need to double clutch it mostly on downshifts. Much better for the gearbox and much smoother with a dogbox.
Anders Termansen "idiot" lol
Well you're way off the ball my friend. The transmission and clutch in your car is not the same as in these trucks.
Man you are grinding the gears and your truck shakes and jerks when you are shifting, you are not mentioning your speed and your RPM before you shifting. bad video
Because when he trains, he teaches you to shift by speed, not rpm. i had him as an instructor and trust me, I got my CDL on first try. Don't be mad that you didn't get yours lol.
Just float gears. A clutch and trans is not cheap