Congratulations to this teacher wow you have so much wisdom knowledge wisdom and understanding for this Graff machine and I love the way you have thought me . God Bless You and Thank You Much. 👍 👍 👍
I know this is a late response. I just want to say I love how you explain the process of this cutter. I have owned it for about 6 months and this video was a big help!! Thank you!
Great video love it very educational , I also love to see how to set up all those setting for vinyl and please tell how to operate set up pen as another test and how to stop the job if it misstake . thanks
I used to make logos with this machine when I was in the middle east. Just wondering what is the brand of the vinyl that suitable for this machine. Every time I'm receiving the Vinyl it doesn't show any brand on the box.
Most, if not all, heat transfer vinyl should be suitable for this machine. Refer to the user's manual for further information. To find out more on our heat transfer vinyl, please visit www.stahls.com/heat-transfer-vinyl-twill
hi my name is Rene , I'm new with CE 6000-60 our program doesn't look like your my is more complicated to work with .. what can a software are you using on this video can you help me with please
When you load small scrap pieces of vinyl into the Graphtec, the screen will continuously say Load Media! There is one work around to this. There are two light sensors on the front of the machine in front of the cutting plain. If you take a small sticker/tape or extra piece of media and cover the left light sensor the machine will read the media.
Just a heads-up....You need to wear your hair back in a ponytail, every time you bent down to line up rollers or check something you blocked the camera as your hair fell in front. Also pin your microphone up higher to the collar....Just saying.....
The Graphtec can cut twill materials, but they have to be on a pressure sensitive backing (or a carrier). Perma-TWILL® generally needs to be laser cut.
actually that happened because she loaded the materially wrong, without tension.. if u grasp the roll with one hand, and hold the front of the material with another hand, u will get a better result. i cut 4 meters with no problem
actually i think that she can tell that when she at 30inches at 13:35, i noticed wright away the skewing, and she did also, cause she covers the origin with the left hand... it was obvious...
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 67 [ซับไทย]](http://i.ytimg.com/vi/he_uIQ-Xv_Q/mqdefault.jpg)
Congratulations to this teacher wow you have so much wisdom knowledge wisdom and understanding for this Graff machine and I love the way you have thought me .
God Bless You and Thank You Much. 👍 👍 👍
Thank you kindly
I know this is a late response. I just want to say I love how you explain the process of this cutter. I have owned it for about 6 months and this video was a big help!! Thank you!
Great video love it very educational , I also love to see how to set up all those setting for vinyl and please tell how to operate set up pen as another test and how to stop the job if it misstake . thanks
If you need to stop a job you can just hit the pause button.
Been at the setting for a while now.. Can't figure out how to stop the cutter going back to the start..
I used to make logos with this machine when I was in the middle east. Just wondering what is the brand of the vinyl that suitable for this machine. Every time I'm receiving the Vinyl it doesn't show any brand on the box.
Most, if not all, heat transfer vinyl should be suitable for this machine. Refer to the user's manual for further information. To find out more on our heat transfer vinyl, please visit www.stahls.com/heat-transfer-vinyl-twill
I can’t get my Adobe Illustrator to Plug into Graphtec Pro Studio cutting master 4
Does the CE-6000 24" cut 7.5 mil Mylar for stencils? Have you done a video on this?
We do not work with these materials but the Graphtec has a very strong downforce.
hi, this machine can die cut? if yes, can you show how to setup blade/machine to make a die cut. tq
Hello, can I use a 12 inch roll on this cutter?
Thank you
Yes you can cut 12 inch width media.
i m having overheating issue on this machine, how to solve this?
We recommend reaching out to Graphtec directly and they should be able to assist you!
How do you adjust the blade to the correct setting before starting a job
You'll want to adjust your blade so that only a little portion of the blade is exposed. Often times we say a half credit card thickness.
@@StahlsTV late response but the Glitter Vinyl is Much thicker. My cuts dont cut all the way when the blade is set for regular vinyl? Help??
hi my name is Rene , I'm new with CE 6000-60 our program doesn't look like your my is more complicated to work with ..
what can a software are you using on this video can you help me with please
CadworxLIVE® and VectorCUT™; please visit www.cadworxlive.com/index.cfm?fuseaction=pageFling&page=designStudio.cfm& for more information.
how do i take off autoweed on cut master?
Do y'all by chance have a recommended settings list available for this machine for the materials y'all sell?
+Steven OLinger www.stahls.com/stahls/content/pdf/vinyl-cutter/Graphtec-US-Download.pdf
can u do a video on how to do scraps of material, i have a 6000-60 and the smallest im getting is 10 inches in width
When you load small scrap pieces of vinyl into the Graphtec, the screen will continuously say Load Media! There is one work around to this. There are two light sensors on the front of the machine in front of the cutting plain. If you take a small sticker/tape or extra piece of media and cover the left light sensor the machine will read the media.
Hi mem I need this machine
Please contact our Customer Service department and we will get you set up! 1(800)-4STAHLS
Hi could you use sure cuts a lot with this cutter.
is it just me, or is she loading each piece of vinyl upside down? isn't it supposed to be carrier side down?
It's just you. All of the materials are correctly loaded carrier side down.
She really did put some carrier side up
Just a heads-up....You need to wear your hair back in a ponytail, every time you bent down to line up rollers or check something you blocked the camera as your hair fell in front. Also pin your microphone up higher to the collar....Just saying.....
Can this machine cut 1mm dots pattern?
This vinyl cutter should be able to handle these small details.
How to use it wich forces
This cutter can cut material like perma twill? tks.
The Graphtec can cut twill materials, but they have to be on a pressure sensitive backing (or a carrier). Perma-TWILL® generally needs to be laser cut.
thank you so much
Where can I buy this software?
Thanks
Hi,
You can access CadworxLIVE and VectorCut by visiting www.cadworxlive.com. All Graphtec related software comes with the cutter itself.
if the machine did that with 30 inches...just think about what it would be doing if you send a 90 inch job...?
actually that happened because she loaded the materially wrong, without tension.. if u grasp the roll with one hand, and hold the front of the material with another hand, u will get a better result. i cut 4 meters with no problem
actually i think that she can tell that when she at 30inches at 13:35, i noticed wright away the skewing, and she did also, cause she covers the origin with the left hand... it was obvious...
But still...you have to be "baby-sitting" the machine, when you are not suppose to do it.
I have to Gerber...and don't have this issue
This lady really has no idea how the Graphtec cutter works and how the software works.
Plz direct me to videos that you think are helpful, I'm about to purchase one. Ty
Wow she could use a lesson, vinyl upside down, can't load vinyl right
Advance after cutting she has no idea