I START TO CUT & PRINT AFTER SEE YOUR TRAINING VIDEO BUT,,, sir help me I have one problem, when start may work cut and print, registration mark well and sender read as well but cutting going bit Horizontal in round cutting "y" direction is good but "x" direction not good in circle cut HOPE YOU UNDERSTAND !
4:28 holy crap I never knew you could do that. What I've always been doing after selecting the object is "Ctrl + X" to cut and "Ctrl+Shift+V" to paste in place on the other layer. lol. Thanks for that trick. Haha
Hi, this is super helpful, thank you! Whenever I send the cut layer to the cutter, it is always about a centimetre off on either side (it cuts the right shape but not in the right place) and I place the job at the bottom right side of the display panel (position 0,0). I have even tried repositioning it and it is just always off. Do you know what to do to make it work?
@@jotoimagingsupplies Unfortunately, it does it even with registration marks. I place the blade at the corner of the marks as the instructions specify and then it scans the marks and looks like everything is fine, but the cut are just off
My cutter finds the registration marks then it does the indicated cut pattern but it cuts over the graphic. The cut path is not aligned with the printed image Why? am I loading the paper wrong or something else? :(
How do you create a contour bleed line using the colors of the object? Instead of using a white stroke, I want to create a stroke with the colors of the object. I hope this makes sense.
Hey guys!!!, im soo happy you've put up these videos. I've been studying them hard. with that said though, Ive encountered an issue, and i wanted to know if you had any suggestions, before I contact graphtec. Now Im able to set up registrations and the like, however when i send it, my plotter doesnt scan for the marks at all. ive set up the machine pretty close to the setting you've walked through in previous videos, but i still get that problem. My work around has been still printing the markers, and setting the origin point and job justification to the lower reg marker. This method gets pretty close, however it leaves me trying to pin point the exact spot, prior to any job i send. In most cases, i have to swap the cutting tool for en embossing tool, and then back to start the job... kind of annoying, but any help would be greatly appreciated.
I am able to set the registration marks fine. I have prints with the registration marks on them and everything falls within the rollers once it is loaded. It is when I want to send the contour cut job when I have my problems. Occasionally the registration marks will show up in CM3 but they will disappear after a second or two. I don't even have to press anything and they will remove themselves. And that is if they even show up in the first place.
That is the version I have but I will give it a shot, just wanted to see if y'all had any advice before I went that route. Thank you for your time to help me out!!
This is a headache omg to much you gotta do. If you have a T-shirt store and it’s busy this will make people leave. I purchased a oki 8432wt print the image peel and press. The printer might cost $7000 but trust me it’s worth it and will pay off in months. Your customers will grow because you can do a lot more on products
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
I START TO CUT & PRINT AFTER SEE YOUR TRAINING VIDEO BUT,,, sir help me I have one problem, when start may work cut and print, registration mark well and sender read as well but cutting going bit Horizontal in round cutting "y" direction is good but "x" direction not good in circle cut HOPE YOU UNDERSTAND !
How do i get Craft STUDIO AND CUTTING MASTER 3 to show on my computer ????
4:28 holy crap I never knew you could do that. What I've always been doing after selecting the object is "Ctrl + X" to cut and "Ctrl+Shift+V" to paste in place on the other layer. lol. Thanks for that trick. Haha
Hi, this is super helpful, thank you! Whenever I send the cut layer to the cutter, it is always about a centimetre off on either side (it cuts the right shape but not in the right place) and I place the job at the bottom right side of the display panel (position 0,0). I have even tried repositioning it and it is just always off. Do you know what to do to make it work?
@@jotoimagingsupplies Unfortunately, it does it even with registration marks. I place the blade at the corner of the marks as the instructions specify and then it scans the marks and looks like everything is fine, but the cut are just off
My cutter finds the registration marks then it does the indicated cut pattern but it cuts over the graphic. The cut path is not aligned with the printed image Why? am I loading the paper wrong or something else? :(
Why can't I find one with Coreldraw ? several thousand of us don't use this software.
Can you please describe how to do registration mark settings on the plotter because my plotter is not recognising the marks
can we kiss cut and die cut in the same time using CE6000 ?
How do you create a contour bleed line using the colors of the object? Instead of using a white stroke, I want to create a stroke with the colors of the object. I hope this makes sense.
did you find anything on this?
Hey guys!!!, im soo happy you've put up these videos. I've been studying them hard.
with that said though, Ive encountered an issue, and i wanted to know if you had any suggestions, before I contact graphtec.
Now Im able to set up registrations and the like, however when i send it, my plotter doesnt scan for the marks at all. ive set up the machine pretty close to the setting you've walked through in previous videos, but i still get that problem. My work around has been still printing the markers, and setting the origin point and job justification to the lower reg marker. This method gets pretty close, however it leaves me trying to pin point the exact spot, prior to any job i send. In most cases, i have to swap the cutting tool for en embossing tool, and then back to start the job... kind of annoying, but any help would be greatly appreciated.
Im struggling to find the Cutting master 3 plugin in my Illustrator how do I get this so I can setup the registration marks?
i cant see cutting master 4 under file tab in illustrator 2023
Hello everyone! Is margin necessary for registration marks? If yes, how much margin should we put? Thank you!
@@jotoimagingsupplies thank you! Say my media is an A4 size paper with 12 pcs of 2.5 sq. inch logos, can you tell me how much margin to put?
Do i need icc profile to print? I am using illustrator
hola hay alguna forma de hacerlo en corelx7 |
Hello is there any way to do it in corelx7
I am having issues with CM3 showing the registration marks. Not sure what I am doing wrong. Could y'all give me some advice?
Illustrator CS5
On a Mac if that makes a difference
I am able to set the registration marks fine. I have prints with the registration marks on them and everything falls within the rollers once it is loaded.
It is when I want to send the contour cut job when I have my problems. Occasionally the registration marks will show up in CM3 but they will disappear after a second or two. I don't even have to press anything and they will remove themselves. And that is if they even show up in the first place.
That is the version I have but I will give it a shot, just wanted to see if y'all had any advice before I went that route.
Thank you for your time to help me out!!
what type of material did you use to print the logo on
Does the image have to be vectorized?
can i cut thick paper like 350 mat papers ?
Does Graphtec make a printer cuter?
Illustrator just updated to CC2018 and cut master 3 is not working now.
did u find what to do???
So we can print & cut both with this machine ?
no..this machine is only a cutter. You would need a separate printer for the printing abilities.
What software do I need to make rhinestone templates?
what material waS thAT?
que numero de navaja es y cuanta presión hay que meter?
depende el material que uses y como instalaste tu navaja.. yo uso presion nueve en el material 651
What kind of vinyl is that?
looking for supplier/dealer near to Bhutan
or only cut ?
please help paper A4 cut transparent sticker error E04017
This might be stupid question but what printer are you using to print the design with before you cut?
Or does the cutter machine also print ?
Thank you. Useful guidance. M.
Its almost impossible to focus on what you are saying with that background music.
how to do that fully by graphtec not by photoshop
I do all of that if i need to cut one color ,, if i need to print sticker and then cut it ? How can i read the registeration marks
This is a headache omg to much you gotta do. If you have a T-shirt store and it’s busy this will make people leave. I purchased a oki 8432wt print the image peel and press. The printer might cost $7000 but trust me it’s worth it and will pay off in months. Your customers will grow because you can do a lot more on products
Typical Adobe simplicity. Ten steps to do one function.
MAS IDIOMAS
ESPAÑOLLL