I'm new to your channel and I must admit, I'm really impressed with the quality of your work. I watched this and the Lotmaxx review and I was not expecting that quality from a channel with only 316 subscribers! If I'm being very very nit-picky, I think the overall image could use just a bit more brightness/contrast either in post or with a more powerful light to make the image pop a bit more! Good work!
Beautiful legacy. Im almost done with a switchwire, little more than half way with a 2.4 but that because im reworking so much due to a few upgrades i want to do but man..... i like this printer too 😬
The Legacy is a good looking love letter to the early days of rods, such a good "scrap part" build. Thank you for the kind words, and good luck with the 2 builds.....or maybe 3 now ;)
Now that's an interesting voron ! May i ask where can i find the files to build the same ? I'm looking to convert some broken 3D printers into a Core XY machine, and this one should do the trick really nicely !
Sure its a Voron Legacey (basiclly the last revision of the V1.6 the files can be found at: github.com/VoronDesign/Voron-Legacy There is no buils manual, but its quite an easy build using just the CAD files, but any questions feel free to shot me a message or check out the voron Discord that has a channel for the Legacy, and a lot of very helpful people!
Good question! The answer is the Stock Voron Legacy doesn't actually have an afterburner with a clockwork, it just has the same form factor as the clockwork but is bowden rather than direct drive. A clockwork can be used, but there is no official support for the drag chains and mounting plates for the Legacy (hell, there is not even a build manual for the Legacy), but a few people have modded their legacy to be direct drive. I just wanted a stock one for my collection of printers. Love the Legacy but for practicality, a trident is a far better option.
Yes, they are modified to cover the whole extrusion. The stock part just triggered me too much having half the extrusion exposed. I didn't design the part myself, it was done by a user on the Discord called Aaron F.
@@hlecter101 Good luck! had a quick look for a link on the discord, but couldnt find it (the joys of looking for older post on discord) If you can't find it, just shoot me an email, or ping me on discord Pigeon#6202 and I can send them over)
Hey Ben, Its eSun ABS+ green (Not sure, but think they may have renamed it as P-Green, as the now have 3 greens in the range P, Pine and Peek) really compliments the Grey they do too as they both have a blue hue to them. Will double check the lable to see if it had a part number.
Not seen any kits for it, most kits are for the v2.4, Zero or v1.8. the parts count is very low, it's really just the frame, rods, and some bearings...It's by far the cheapest build of all the Vorons.
Well Spotted, had the tension a little too tight on the belt and think that was creating the issue. (And awesome work on the Doot Changer, thought I recognized that username!!)
The switch wire mod is a really nice upgrade to the stock Ender 3. not sure if you have seen it, but there is a user mod specifically for the Ender 3 and Pro models by Gizzzle . github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Gizzle/ender-3_(pro)_switchwire
@@PigeonPrint Looks pretty interesting. Ill have to give it a consideration when I get started one day. Need to upgrade my lack enclosure with a air filter so I can do ABS first though.
I've not done any high-speed testing on it yet. But, can't see it getting into V2.4 speed territory due to how much more ridged rails are over rods. But, I have a high-flow Dragon for it, so will do some testing to see if it's limited by how much plastic it can push or the kinematics. I would be inclined to say build a V1.8 if you wanted to go for fast and affordable.
For the love of god this thing is a piece of art.
Loved the auto bed leveling
I agree, and all credit goes to the Voron Dev team! I picked a Vorong Legacy to build as they are just such beautiful printers.
This, this is perfection.
Oh that's even the same color combo I'm currently using to print my Voron Legacy parts :D Nice Video!
Good luck, its a really fun build!
I'm new to your channel and I must admit, I'm really impressed with the quality of your work. I watched this and the Lotmaxx review and I was not expecting that quality from a channel with only 316 subscribers!
If I'm being very very nit-picky, I think the overall image could use just a bit more brightness/contrast either in post or with a more powerful light to make the image pop a bit more!
Good work!
Thank you for the kind words and suggestions, I really do need to work on my colour grading and lighting. So I hope they will slowly get better!
wow this is a tiny voron legacy compared to this 30mm cube
Even LCD has the same retro green color, fantastic work.
Thank you for noticing that little detail!
Beautiful legacy. Im almost done with a switchwire, little more than half way with a 2.4 but that because im reworking so much due to a few upgrades i want to do but man..... i like this printer too 😬
The Legacy is a good looking love letter to the early days of rods, such a good "scrap part" build. Thank you for the kind words, and good luck with the 2 builds.....or maybe 3 now ;)
Now that's an interesting voron !
May i ask where can i find the files to build the same ? I'm looking to convert some broken 3D printers into a Core XY machine, and this one should do the trick really nicely !
Sure its a Voron Legacey (basiclly the last revision of the V1.6 the files can be found at:
github.com/VoronDesign/Voron-Legacy
There is no buils manual, but its quite an easy build using just the CAD files, but any questions feel free to shot me a message or check out the voron Discord that has a channel for the Legacy, and a lot of very helpful people!
Hi i have a question,why have a m4 when you also have a afterburner with a clockwork?also it is a super nice looking machine:)
Good question! The answer is the Stock Voron Legacy doesn't actually have an afterburner with a clockwork, it just has the same form factor as the clockwork but is bowden rather than direct drive. A clockwork can be used, but there is no official support for the drag chains and mounting plates for the Legacy (hell, there is not even a build manual for the Legacy), but a few people have modded their legacy to be direct drive. I just wanted a stock one for my collection of printers.
Love the Legacy but for practicality, a trident is a far better option.
@@PigeonPrint ohh ok
man.... this is ART.... you kill me :)
Master 😍
That is a damn fine serial request.
Thank you. I thought the under represented Legacy needed some love, and respect on its name!
@@PigeonPrint You excelled, honestly. Very, very well produced. I'm sure quality is reflected in all of your work.
This is beautiful! Did you modify the upper idlers they seem to cover the 2020?
Yes, they are modified to cover the whole extrusion. The stock part just triggered me too much having half the extrusion exposed. I didn't design the part myself, it was done by a user on the Discord called Aaron F.
@@PigeonPrint yeah, same feeling. Did not noticed it after it waa printed and I test fitted. Thanks for the lead, looks like i have to redo my uppers.
@@hlecter101 Good luck! had a quick look for a link on the discord, but couldnt find it (the joys of looking for older post on discord) If you can't find it, just shoot me an email, or ping me on discord Pigeon#6202 and I can send them over)
hey! hope I'm not too late here, what filament did you use for the teal/turquoise parts?
Hi, its an Esun ABS+ Green (even though its much more like a teal IMHO), not to be mistaken with Esun Pine Green, or Esun Peak Green .
@@PigeonPrint thank you so much!🌟
@@PigeonPrint also, did you have any troubles printing it or with deformation after you mounted the parts?
@@NicoTheVideoMaker None, yet to have any issues with Esun ABS+ and printed 3 Vorons with it (all 3 the parts were printed on an Ender 3 in a box).
Is it really a serial request video? I thought it is a commercial of kickstarting product. Very well done 👍🏻
:D thank you. you are too kind!
What filament did you use for your blueish green parts? Love the build!
Hey Ben, Its eSun ABS+ green (Not sure, but think they may have renamed it as P-Green, as the now have 3 greens in the range P, Pine and Peek) really compliments the Grey they do too as they both have a blue hue to them. Will double check the lable to see if it had a part number.
@@PigeonPrint Thank you so much!
voron 1.6?
Was a V1.5, then a V1.6 and then a Voron Legacy that was the last of the V1 style that was replaced by the Trident.
Now disable thermal runaway protection and it is truly OG
OK, that made me laugh! :)
hey would you like to sell this printer
Has any business-orientated mind assembled the parts for building one like that voron?
Not seen any kits for it, most kits are for the v2.4, Zero or v1.8. the parts count is very low, it's really just the frame, rods, and some bearings...It's by far the cheapest build of all the Vorons.
That extruder gear looks very... Wobbly and non circular! If you ever end up with print issues consider that
Well Spotted, had the tension a little too tight on the belt and think that was creating the issue. (And awesome work on the Doot Changer, thought I recognized that username!!)
@@PigeonPrint w-waaaaat I'm blushing thank you 🤗🥰🥰 didn't expect to be recognized!!!
I dream of getting a voron one day. I hope to get a second printer one day if anything and convert my OG ender 3 into a Voron Switchwire.
The switch wire mod is a really nice upgrade to the stock Ender 3. not sure if you have seen it, but there is a user mod specifically for the Ender 3 and Pro models by Gizzzle . github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Gizzle/ender-3_(pro)_switchwire
@@PigeonPrint Looks pretty interesting. Ill have to give it a consideration when I get started one day. Need to upgrade my lack enclosure with a air filter so I can do ABS first though.
Really nice... Can it go fast? like 2.4 or rat rig?
I've not done any high-speed testing on it yet. But, can't see it getting into V2.4 speed territory due to how much more ridged rails are over rods. But, I have a high-flow Dragon for it, so will do some testing to see if it's limited by how much plastic it can push or the kinematics. I would be inclined to say build a V1.8 if you wanted to go for fast and affordable.
@@PigeonPrint Congratulation anyway...nice printer, nice music and nice video!
Love the color of that green
Thanks, it's Esun ABS+ Green.
Well done!
Thank you, was a fun build and a good way to get into the Afterburner ecosystem.
That's one tiny printer! Just look at it compared to that calibration cube
I may have scaled the cube up just a little for artistic license :D
So clean
Thank you! just don't ask to see the electronics compartment! :)
over engineered, will be broken after a few prints
Would love to hear what you would change about the design.
Dude probably hasn't touched anything other than an ender or an anet XD