So good to finally get rid of that shiny “piano finish”.😊 I had no problem following your video instructions and I used a black matte carbon wrap with “linen” surface. …now it’s only the shiny details on the steering wheel that still bothering me… The centre screen got a nice “matte” cover only days after I picked up the car.
Woah - you’ve got some balls ripping apart your car like that - lol - I don’t think I’m going to bring myself to do this when my P2 arrives in October. Looks like you did a great job though!
Hi, I noticed your Polestar 2 does not have the passenger dashboard lighting? I just purchased a Polestar 2 and found out that the high illumination is part of the Plus package, which I didn't realise at the time of purchase. Are you able to do an instruction video on how to install the missing lighting (passenger dash, center console, door welcome light and boot lighting) that would be available with the Plus package? Thanks heaps
Nice, thorough explanation. Thanks! Expecting delivery of my Polestar next month. I think wrapping the console may be the first thing I do upon delivery since the piano black trim looks like it will get scratched in no time. Do you still recommend the carbon wrap? Does it stay looking pretty clean? How does it handle the fingerprints, etc? Cheers!
Thanks! Well I would still recommend the carbon wrap but not just the one I got. Was not happy with mine so I removed it. Also it was to thick so it interfered with the defroster buttons. But I also realized that doesn’t matter during summer.. But a wrap is an easy first mod.
is the car still "drivable" even the center console panel was removed? I mean, there is no malfunctions on display etc.? So, I can drop the panel to the wrapper and pick it up later?
Yes the car can still be driven without the center console. You could unscrew the “play/pause/hazard” module and plug it in to the cable. That way you have those functions. But technically it works without it.
Soyafilm.se (but I felt that the wrap was too thick. Made the defroster/ hazard button a bit too hard to press. In my opinion. Not sure if it’s the wrap or all wraps.
Have you thought about vinyl wrapping the ugly plastic trim that would otherwise be wood in the plus package. That plastic bothers me to know end, and I'm even entertaining vinyl fake leather wrap, which the more I think about it feels like a bad idea.
Det är bara två superkorta laddkablar, en svart USB-C och en vit Lightning. Gillar att ha det organiserat. www.webhallen.com/se/product/305517-Deltaco-USB-C-till-Lightning-kabel-0-25m-Vit
This is a 3d printed cup holder, bought the file from Cults3d.com for about 6 euro. It prints in 3 parts so it’s actually quite good. Just recorded a video on that, will post it in maybe a week.
Ja det är en 3d printad mugghållare, köpte filerna till den från cults3d.com. Den printat in 3 delar. Riktigt bra, men önskar man kunde köpt den gjuten i plast bara. Hade blivit lite snyggare.
@@BasinBjorn Neinei. Det er ikke vanskelig. Jeg har gjort det jeg. Bare dra den rett ut. (den pianolakken som er nederst - ikke knappene) :) Har bilder, men jeg får ikke vist dem til deg her
So good to finally get rid of that shiny “piano finish”.😊
I had no problem following your video instructions and I used a black matte carbon wrap with “linen” surface.
…now it’s only the shiny details on the steering wheel that still bothering me…
The centre screen got a nice “matte” cover only days after I picked up the car.
Woah - you’ve got some balls ripping apart your car like that - lol - I don’t think I’m going to bring myself to do this when my P2 arrives in October. Looks like you did a great job though!
Hi,
I noticed your Polestar 2 does not have the passenger dashboard lighting? I just purchased a Polestar 2 and found out that the high illumination is part of the Plus package, which I didn't realise at the time of purchase.
Are you able to do an instruction video on how to install the missing lighting (passenger dash, center console, door welcome light and boot lighting) that would be available with the Plus package?
Thanks heaps
Thanks so much for this perfect guide
Nice, thorough explanation. Thanks! Expecting delivery of my Polestar next month. I think wrapping the console may be the first thing I do upon delivery since the piano black trim looks like it will get scratched in no time. Do you still recommend the carbon wrap? Does it stay looking pretty clean? How does it handle the fingerprints, etc? Cheers!
Thanks! Well I would still recommend the carbon wrap but not just the one I got. Was not happy with mine so I removed it.
Also it was to thick so it interfered with the defroster buttons. But I also realized that doesn’t matter during summer..
But a wrap is an easy first mod.
is the car still "drivable" even the center console panel was removed? I mean, there is no malfunctions on display etc.? So, I can drop the panel to the wrapper and pick it up later?
Yes the car can still be driven without the center console. You could unscrew the “play/pause/hazard” module and plug it in to the cable. That way you have those functions. But technically it works without it.
Nice! Where did you by the vinyl?
Soyafilm.se (but I felt that the wrap was too thick. Made the defroster/ hazard button a bit too hard to press. In my opinion. Not sure if it’s the wrap or all wraps.
Don't own a Polestar, never will. Still enjoying your vids. Keep up the good work!
Have you thought about vinyl wrapping the ugly plastic trim that would otherwise be wood in the plus package. That plastic bothers me to know end, and I'm even entertaining vinyl fake leather wrap, which the more I think about it feels like a bad idea.
So nice ,,, subscribed to your channel 😅
Thank you!
Vad har du pluggat in i USB-C-uttagen? :)
Det är bara två superkorta laddkablar, en svart USB-C och en vit Lightning. Gillar att ha det organiserat.
www.webhallen.com/se/product/305517-Deltaco-USB-C-till-Lightning-kabel-0-25m-Vit
@@BasinBjorn nice! Blir något liknande här fast svarta både för USB-C och Lightning.
Thanks for the video. I do have to say that the vinyl doesn't look very good. Send an update vinyl look
Nice,will do this when mine arrives,what cupholder ist this? :)
This is a 3d printed cup holder, bought the file from Cults3d.com for about 6 euro. It prints in 3 parts so it’s actually quite good. Just recorded a video on that, will post it in maybe a week.
@@BasinBjorn Nice,thanks!!
good job!!
Aaa såg tidigare kommentar vad är det för cupholder? :))
Ja det är en 3d printad mugghållare, köpte filerna till den från cults3d.com. Den printat in 3 delar. Riktigt bra, men önskar man kunde köpt den gjuten i plast bara. Hade blivit lite snyggare.
nice
Not too bash but i think it looks cheap. Maybe it would look better with other/better quality wrap and installed by professional
I would hydrodipp it
Ikke glem å foliere pianolakken på rattet også da :)
På ratten?! Nej det låter som alldeles för mycket jobb!
@@BasinBjorn Neinei. Det er ikke vanskelig. Jeg har gjort det jeg. Bare dra den rett ut. (den pianolakken som er nederst - ikke knappene) :) Har bilder, men jeg får ikke vist dem til deg her
If i do this i know i will fuck it up 😅
Sorry but it looks horrible...