Thanks A Lot for this video! i looked for the assembly drawings of the EPB but they are nowhere to be found! so i could understand the mechanism thanks to You!
Did the job. Observed the five turns. Once fitted and used the screwed in side was forced off and became detached from the module. Brake failure! Watched this video afterwards to see if I had done anything wrong. I have not. Grrr. Must be another problem. Land Rover we love you. We love you to death Lol.
The most common cause of failure in your exact issue is incorrectly fitted or corroded or broken handbrake return springs, it's the spring that goes on the brake cable inside the drum and wraps around the arm of the brake shoe
Mate great video thanks . After I did what u did exactly all back on put silicone install it all back, try still handbrake light on flashing and no sound from motor as I test it before it’s working like clock , do I need do anything else?.. Cheers Matt
Great video! Any idea what the part (hand brake mechanism) with the blue plug is called, or what part number it has? Managed to break the the thin, orange wire on mine...
@@maxautoukI mean the white plastic piece in the bottom left, that latches with the screw coming in from the right. It has an orange “ribbon wire” that goes up to the blue plug. You reconnect it at 10:47 in the video. Anyway, managed to source a used one to replace the one I broke, hope it works 😅 Thanks again for a great video👍
@@andrewmurray4113 if the spring on the inside of the backing plate that hooks over the lever arm of the cable is corroded or damaged replace that too or it will let the epb cable slip out and you'll need a scan tool to set it back to the latching position
@@maxautouk my new cables have come with new springs that attach to the lever arms of the shoes, any idea on what size these clips are that hold the cables into the backing plates? Cheers
Hi buddy this is proberly a long shot as this was a year ago but I've done my ebp a few weeks ago managed to get another look at it today and even if I manually latch it on as soon as the handbrake is applied from inside the car it just detaches with out hardly any force and its got me completely baffled as I've reassembled all the shoes and everything again and I cant see anything wrong but I'm obviously missing something somewhere
Is the spring inside the backing plate broken? It needs to hook around the lip where the handbrake cable comes through and it needs to latch into a groove on the retaining tab on the lever otherwise the cable will repeatedly slip out
@@maxautouk yes both sides are as I checked that today after reading the comment someone else left onthis video but there defiantly in and onto the retaining tab of the groove inside the arm on the shoe
Might be worth checking all of the basics again like the setting of the shoes, making sure the handbrake cables are all moving inside their sleeves etc
Thanks A Lot for this video! i looked for the assembly drawings of the EPB but they are nowhere to be found! so i could understand the mechanism thanks to You!
Glad I could help!
Did the job. Observed the five turns. Once fitted and used the screwed in side was forced off and became detached from the module. Brake failure! Watched this video afterwards to see if I had done anything wrong. I have not. Grrr. Must be another problem. Land Rover we love you. We love you to death Lol.
The most common cause of failure in your exact issue is incorrectly fitted or corroded or broken handbrake return springs, it's the spring that goes on the brake cable inside the drum and wraps around the arm of the brake shoe
@@davidporter3505 we love the Disco 3...
You gotta love something in this life after all ..
But God! Gimme the patience!
Mate great video thanks . After I did what u did exactly all back on put silicone install it all back, try still handbrake light on flashing and no sound from motor as I test it before it’s working like clock , do I need do anything else?..
Cheers
Matt
Is the motor power cables clipped on correctly?
Great video! Any idea what the part (hand brake mechanism) with the blue plug is called, or what part number it has? Managed to break the the thin, orange wire on mine...
I’m not sure what you mean, do you mean the plug that stays in the car broke?
@@maxautoukI mean the white plastic piece in the bottom left, that latches with the screw coming in from the right. It has an orange “ribbon wire” that goes up to the blue plug. You reconnect it at 10:47 in the video.
Anyway, managed to source a used one to replace the one I broke, hope it works 😅
Thanks again for a great video👍
@@sveinistube let me know how you get on 😁
I need to replace the board in mine. Do you think it could be swapped over with the module in place on the truck?. Thanks
It may very well need recoding to the vehicle with a diagnostic tool if the circuit board is swapped
@@maxautouk okay, thanks 👍🏻
Just watched your videos of EPB Removal and Rebuild, How long did the job take?
Probably four hours spread out over a few days waiting for parts and such
Can the EPB be removed without removing all the cables to the cab and the shoes.
I must admit I haven’t tried this myself but I think you need to remove the cables
What did you do about the broke circlip that holds the cables in to the backing plates
I have a box of c clips so I just popped in some new ones
@@maxautouk one of mine broke one came out complete so I will have to get a couple before I can finish mine
@@andrewmurray4113 if the spring on the inside of the backing plate that hooks over the lever arm of the cable is corroded or damaged replace that too or it will let the epb cable slip out and you'll need a scan tool to set it back to the latching position
@@maxautouk my new cables have come with new springs that attach to the lever arms of the shoes, any idea on what size these clips are that hold the cables into the backing plates? Cheers
@@andrewmurray4113 I'd guess 17mm but I always buy them by the tray so I don't really measure I just keep grabbing them until I get the right size
Great job, very informative 👍🏼, but you would be more comfortable working at a bench🤔
Thanks for the comment
I do have a bench, and workshop and lift but I like to show the DIY approach on my videos 👌
Hi buddy this is proberly a long shot as this was a year ago but I've done my ebp a few weeks ago managed to get another look at it today and even if I manually latch it on as soon as the handbrake is applied from inside the car it just detaches with out hardly any force and its got me completely baffled as I've reassembled all the shoes and everything again and I cant see anything wrong but I'm obviously missing something somewhere
Is the spring inside the backing plate broken? It needs to hook around the lip where the handbrake cable comes through and it needs to latch into a groove on the retaining tab on the lever otherwise the cable will repeatedly slip out
@@maxautouk yes both sides are as I checked that today after reading the comment someone else left onthis video but there defiantly in and onto the retaining tab of the groove inside the arm on the shoe
Might be worth checking all of the basics again like the setting of the shoes, making sure the handbrake cables are all moving inside their sleeves etc