I give thanks to the Lord for giving you the skills and knowledge to build this picnic table and post this video to teach others. It is truly a blessing to my family. My 10 year old Son and I started building it yesterday, and we finished this afternoon. Now we can enjoy more family time outside. May God bless you and your family.
My son built 2 picnic tables for our local county’s park and recreation as his service project for his Eagle Scout rank and used your design. Went very well. Did run into issues with cross bracing as the 45 degree angles were off. We were able to fix it though. Thanks.
I followed these directions to build our table and it turned out perfect! The only thing I did different was add L brackets to connect the table and table legs for extra durability. 🎉thank you for the good TH-cam information!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
@@MechanicLife Hahaha. In Australia we call Flip flops 'Pluggers', referring to the little plugs that go through the bottom of the sole. If you're lucky, you can find 'Double-Pluggers' that have two plugs at the rear of each side and NEVER pull out when you're doing really important things like running away from wild animals or saving families from burning buildings.
Thank you sir, that was an easy tutorial how to build a picnic table, no politically correct language just straight to the point, thank you!!! I am surprised you only have 1000 subscribers.
Picnic Table: Use these notes, while watching the video. ========================================================== MATERIAL ========================================================== -12 2X6X8 Pine Boards -3 2X4X8 Pine Boards -8 3-1/2" Carriage Bolts with Washers and Nuts 16.00 -Box of Wood Screws 2-1/2" TORX head -Wood Glue ---------------------------------------------------------- TOOLS: ---------------------------------------------------------- -Circular Saw -Drill with TORX Head Driver (T25) Bit -Pencil -Speed Square + Framing Square -Vise/Pipe Clamps + Level -Gloves, Face Shield -Horses, and or Table ---------------------------------------------------------- Actual Materials Cost: ~ $130.00 Labor: : 4 hrs. ========================================================== ITEMIZED PURCHASES ========================================================== Order # 415121756 Invoice # 76172 ---------------------------------------------------------- Hillman 5/16-in x 3-1/2-in Stainless Coarse Thread Carriage Bolt Qty: 8 $14.40 Hillman 18 x 5/16-in Galvanized Steel Hex Nut Qty: 10 $2.10 Hillman 5/16-in Standard (SAE) Split Lock Washer Qty: 16 $3.36 Gorilla Off-white Interior/Exterior Wood Adhesive (Actual Net Contents: 18-fl oz)Qty: 1 $6.90 Hillman 5/16-in Stainless Steel Standard (SSAE) Nylon Insert Lock Nut Qty: 8 $3.12 Hillman 1-1/4 x 5/16 Fender Washers Qty: 16 $2.88 Power Pro #10 x 2-1/2-in Ceramic Deck Screws (45-Count) Qty: 1 $6.78 Hillman 5/16-in Stainless Steel Standard (SSAE) Nylon Insert Lock Nut Qty: 8 $3.12 Severe Weather (Common: 2-in x 4-in x 8-ft) #2 Prime Treated Lumber Qty: 3 $13.41 Severe Weather (Common: 2-in x 6-in x 8-ft8-ft) #2 Prime Treated Lumber Qty: 12 $63.24 ========================================================== BUILD ========================================================== 1. Assemble the tabletop, upside down.
2x4 Under braces on ends Measure:4 cuts - 23.5" 2 Braces on each end.
A. Measure: from edge of table: 2.5” place board 1 B. Measure: from edge of table: 13.5” place board 2 Screw/Drill/Glue Braces: C. Measure: Center them 2" From the table edges. (Repeat for the other side of the table). 2. Assemble the Benches, (upside down). (4)2x6" (2)2x4" 2x4 Under braces Lengthwise. Measure: 62" Long Lag Measure: for the 2x4 placement = 17" from edge *Screw/Drill/Glue Bench Braces 3. Create Legs (Angle cuts with speed square).
Lay a 2x6 down Legs will be 30" long, at a 25d angle cut. Repeat this up the board for each leg.
Cut the 2x6, to create 4 legs @ (25d) Carriage Bolt Holes:
Measure up from the bottom of legs, 12.5 inches, duplicate angle for Carriage Bolt Lines. 4. Create Seat Support Beam(s): with Carriage bolts: (2) 2x6 Measured: 59" long First Notch a 4" highlight angle to the ends of seats with a speed square. (no Angle really) AGAIN *Measure up from the bottom of legs, 12.5 inches, duplicate angle for Carriage Bolt Lines. Drill holes in the first leg, then Template another leg, to duplicate holes. (x 4) The holes should be HIGH on the leg, when the tabletop is upside down. If the holes are low, you misplaced the leg. Drill Template: Use one Beam to drill the other beam. 5. Attach the Legs: Screw/Drill holes into the 2x4 bracing 90d, (not through the table)
Use Clamps to hold the legs in place Measure: 2" From leg, to end of table brace. 6. Aligning the Seat Cross brace, with the Leg Holes The cross beam is placed outside the table brace #2 Use a Framing Square, to align the Cross beams, so, you can drill the holes to match the legs. Center the Cross Beam to hang off ~15" + 5/8ths (doesn’t have to be exact, it may vary, just center it. Place Framing Square between the cross brace, and the leg. Target the "inside" hole first.
From the backside of the beam, notch a mark that aligns to the inside hole *OPTION B: align the cross beam at the screw holes, and just drill through The cross beam, as centered, but lifted up to the holes. 6. Cross Bracing 2x4's for table You should have 2 left-over 2x4's The 2x4 V bracing under the benches should fall inside the Cross Beams. Cut 45d angles in the edges for the cross bracing. You will need to set your circular saw to 45d
Circular Saw Note:
When cutting this angle use the guideline on the saw @ 45d Notch, not the normal notch straight notch *Or: eyeball the cut, to be flusher. (not necessary, but nice to have)
Use a level for Sideways, and Vertical on the legs and set the 2x4 beams *Carefully drill to keep the table in LEVEL 7. Attach the Benches. Align the bench along the outside edge of the cross beam. (Furthest from the table edge) Place the bench and screw it down. >Sand the table
Weird, I just moved to Montana and I’m trying to find ways to refurbish this picnic table I got for free... and now I see this made in Montana picnic table how to. Very cool, thanks for the info!
I’ve watched several videos on how to assemble a picnic table and by far this is the best. It’s simple and is built upside down making it easy to construct. Look out for the carpenter who builds one in 10 minutes; it’s hilarious and explains how not to built one - it’s priceless.
The one answer I don't see is how you move this thing once it's built without a forklift? Thanks for the video. This was my first attempt at anything this large. I was able to get slightly out of kilter 2x6x16 lumber for the whole thing for $25 and used pipe clamps to pull everything straight. The most expensive item was the wood screws!
Barry, you probably solved this already, but: Just measure up the leg 12.5" ~ and match the 25 Degree ? line. Essentially go up the leg, and duplicate that angle. I had the same problem. Its not made clear in the video. While making the legs, you can simply put the same line on the board - up 12.5". Make sure you measure from the bottom. If you measure from the bottom on each corner of the leg, 30", the angle will be the same. + You will find your hole line.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
As you are using 2x4 and 2x6 wood how can the bolts only be three and a half inch when the combined thickness of the legs and seat supports is 4 inches?
Nice design. I’m using redwood. It’s pricey but it’s beautiful and doesn’t need to be finished because it’s under roof in a Ramada. Also, it’s so nice to work with.
Great job!! I see that some people are talking about the wood glue don’t they realize that it’s a option, either you do it or you don’t. Again great job in explaining the process !!
I have built this table as a gift. It comes out very, very nice. People are very impressed. However, it weighs a lot, and not easy to transport. You will love the end result. This table can seat 8 people, as opposed to the usual 4 people.
Thank you, and a few minor corrections: You will need about 60 screws, one box usually holds ~ 50. I used T25 Torx : 2 1/2" Wood screws. "The Carriage bolt line" - AKA "The seat line measurement" , is measured from the ground 12.5", essentially duplicating the bottom angle of the Leg. (I think that was 25 Degrees. The author explains it in comments below. "I measured from the part of the leg that will set on the ground and came up 12.5". Once I had that mark I used that to pivot on to make another 25 degree line." and : You should be able to measure up each side of the the board length and make your marks and this will automatically create your 25 degree angle." Basically, if you measure up from any leg, the angle will be correct.
Thank you! Was in the middle of this project when I noticed at the 15 minute mark he didn't explain that distance (editing error I believe? Looks like he said he was going on to the 2x4 cut but all of a sudden he's back to the legs)
I built this exact table wish I could show you pics of it.. The only issue I had when I used to scrap 2x4s for the support legs. I had to cut them down about 28 to 27 in. so when I cut the 45 degree angle on the ends it fit perfectly. They were too long to fit from the bottom of the table to support the leg.
If I wanted to take the table down to 7’ instead of 8’ due to space, can I still use the other measurements but make adjustments to the 2x4 supports under the table top or even remove the ones at 2.5” and just keep the 13.5” supports?
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Need to know measurements for holes you drilled on the legs? From the end your going to mount to table brace, end to the holes 2” &4” marked hole so we can mount it to table.
VERY NICE VIDEO! LOL Just one thing. You did a beautiful job hiding the screw holes, then you drilled screws into the seats! omg. That's something I would have done. You should have screwed the bottom braces to the supports under the seats, that would have kept the seat in place just fine....even add some wood glue under the seat where it sits on the brace and BAM! No screw holes and you go to the top of the banana split!!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Right now 8/25/2022 the lumber for the project is about 70 dollars if you buy number 2 prime grade kiln dried pine, hardware is about 25 dollars, and a tube of construction adhesive is about 10, for a total of about 105 at home depot. A pre-made table at home depot is 159 plus tax, so if you already have the tools you need, you would save about 60 bucks on each table to build it yourself.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Treated wood isn't a bad idea. We will have this in pea gravel sitting on top of weed guard. Seems to work well for drainage. I also treated it with Linseed Oil as well. We will see how it handles up to the Montana Winters:)
Material You Will Need -12 2X6X8 Pine Boards -3 2X4X8 Pine Boards -8 3-1/2" Carriage Bolts with Washers and Nuts -Box of Wood Screws 2-1/2" -Wood Glue -Circular Saw -Drill with Phillips Head Driver -Pencil -Speed Square or Framing Square -Vise/Pipe Clamp
you didn't use spacers for the top to reduce the swelling of the wood.? Also why are you not drilling pilot holes to preventing the wood from splitting?
@@glenncalzada1707 Thanks for the education, and no thanks for the sarcasm. Unfortunately your statement is not supported by factual evidence. If you Google "torque screw" you will not find support for your statement. Wikpedia has the following: "Torx (pronounced /tɔːrks/), developed in 1967[1] by Camcar Textron,[2] is a trademarked type of screw drive characterized by a 6-point star-shaped pattern. A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal." Sorry to have to nit-pick your "correction," but it's simply not correct.
@@g.m.forsythe9626 thanks for the correction. I was thinking nuts and bolts. You ade talking screws. Auto mechanics use torque wrenches to loosen and tighten nuts to a specific degree of lbs.. Apple and oranges evidently. Sorry if you found sarcasm in my earlier remark. It was unintended.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
is a really good job, but you said it will cost a total of 120 $ i have been to home depot and only 2x6x8 one costs 12.52 $, anyone tips on where can i buy cheap?
I give thanks to the Lord for giving you the skills and knowledge to build this picnic table and post this video to teach others. It is truly a blessing to my family. My 10 year old Son and I started building it yesterday, and we finished this afternoon. Now we can enjoy more family time outside. May God bless you and your family.
Awesome! Glad it worked out for you guys!
Good work
May I ask why you didn’t give room for expansion on the 2x6’s? Just wondering!
God blessed
Nice work!
Cut list:
9 2x6x8’
4 2x4x23.5”
2 2x4x62”
4 2x6x30” tip to heel at 25 degree angle
2 2x6x59” with 45 degree dog ear.
My son built 2 picnic tables for our local county’s park and recreation as his service project for his Eagle Scout rank and used your design. Went very well. Did run into issues with cross bracing as the 45 degree angles were off. We were able to fix it though. Thanks.
I followed these directions to build our table and it turned out perfect! The only thing I did different was add L brackets to connect the table and table legs for extra durability. 🎉thank you for the good TH-cam information!
Great video. I needed a table for an outdoor gathering and this was a quick foolproof plan that only took a few hours.
I see you’re real good at what you do great job sir!!!
Thanks for posting this. I was able to duplicate this in my garage last night using your instructions. Loved the way it turned out. Thanks again.
Awesome!
Made mine with 6 pieces of wood on top made mine 15 years ago still going strong found that off setting the braces strengthens it considerably.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
I just built this and there are some details that I had to figure out on my own. However it's a GREAT tutorial!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Built this today! Turned out great. Went to the comments for the missing measurements and found them!
Awesome! Thanks everyone for adding the missing measurements too!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Excellent work! Constructed slightly different from the tables I've built, but looks like it'll work perfectly for a hotdog eating stand! Nice job!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Love the Tongan work boots at 12:28 I have a rubber pair. Thanks for the build video too mate. Very useful.
Nothing like REEF sandels man!
@@MechanicLife Hahaha. In Australia we call Flip flops 'Pluggers', referring to the little plugs that go through the bottom of the sole. If you're lucky, you can find 'Double-Pluggers' that have two plugs at the rear of each side and NEVER pull out when you're doing really important things like running away from wild animals or saving families from burning buildings.
Freakin awesome! :) I am picturing someone running into a burning building with their double pluggers on. Super hero baby!
@@MechanicLife hahaha, that's about it.
Thank you sir, that was an easy tutorial how to build a picnic table, no politically correct language just straight to the point, thank you!!! I am surprised you only have 1000 subscribers.
Thanks! Spread the word;)
Thank You.
Well Made Video. Explained well - Step X Step.
Thank You For The Cut List.
I'm building this for a weekend project with my 8 years old son , very informative , thank you sir
How far up the table legs did you drill the holes?
Picnic Table: Use these notes, while watching the video.
==========================================================
MATERIAL
==========================================================
-12 2X6X8 Pine Boards
-3 2X4X8 Pine Boards
-8 3-1/2" Carriage Bolts with Washers and Nuts 16.00
-Box of Wood Screws 2-1/2" TORX head
-Wood Glue
----------------------------------------------------------
TOOLS:
----------------------------------------------------------
-Circular Saw
-Drill with TORX Head Driver (T25) Bit
-Pencil
-Speed Square + Framing Square
-Vise/Pipe Clamps + Level
-Gloves, Face Shield
-Horses, and or Table
----------------------------------------------------------
Actual Materials Cost: ~ $130.00
Labor: : 4 hrs.
==========================================================
ITEMIZED PURCHASES
==========================================================
Order # 415121756 Invoice # 76172
----------------------------------------------------------
Hillman 5/16-in x 3-1/2-in Stainless Coarse Thread Carriage Bolt Qty: 8 $14.40
Hillman 18 x 5/16-in Galvanized Steel Hex Nut Qty: 10 $2.10
Hillman 5/16-in Standard (SAE) Split Lock Washer Qty: 16 $3.36
Gorilla Off-white Interior/Exterior Wood Adhesive (Actual Net Contents: 18-fl oz)Qty: 1 $6.90
Hillman 5/16-in Stainless Steel Standard (SSAE) Nylon Insert Lock Nut Qty: 8 $3.12
Hillman 1-1/4 x 5/16 Fender Washers Qty: 16 $2.88
Power Pro #10 x 2-1/2-in Ceramic Deck Screws (45-Count) Qty: 1 $6.78
Hillman 5/16-in Stainless Steel Standard (SSAE) Nylon Insert Lock Nut Qty: 8 $3.12
Severe Weather (Common: 2-in x 4-in x 8-ft) #2 Prime Treated Lumber Qty: 3 $13.41
Severe Weather (Common: 2-in x 6-in x 8-ft8-ft) #2 Prime Treated Lumber Qty: 12 $63.24
==========================================================
BUILD
==========================================================
1. Assemble the tabletop, upside down.
2x4 Under braces on ends
Measure:4 cuts - 23.5"
2 Braces on each end.
A. Measure: from edge of table: 2.5” place board 1
B. Measure: from edge of table: 13.5” place board 2
Screw/Drill/Glue Braces:
C. Measure: Center them 2" From the table edges.
(Repeat for the other side of the table).
2. Assemble the Benches, (upside down).
(4)2x6"
(2)2x4"
2x4 Under braces Lengthwise.
Measure: 62" Long
Lag Measure: for the 2x4 placement = 17" from edge
*Screw/Drill/Glue Bench Braces
3. Create Legs
(Angle cuts with speed square).
Lay a 2x6 down
Legs will be 30" long, at a 25d angle cut.
Repeat this up the board for each leg.
Cut the 2x6, to create 4 legs @ (25d)
Carriage Bolt Holes:
Measure up from the bottom of legs, 12.5 inches, duplicate angle
for Carriage Bolt Lines.
4. Create Seat Support Beam(s): with Carriage bolts:
(2) 2x6 Measured: 59" long
First Notch a 4" highlight angle to the ends of seats
with a speed square. (no Angle really)
AGAIN
*Measure up from the bottom of legs, 12.5 inches, duplicate angle
for Carriage Bolt Lines.
Drill holes in the first leg, then Template another leg,
to duplicate holes. (x 4)
The holes should be HIGH on the leg,
when the tabletop is upside down.
If the holes are low, you misplaced the leg.
Drill Template: Use one Beam to drill the other beam.
5. Attach the Legs:
Screw/Drill holes into the 2x4 bracing 90d, (not through the table)
Use Clamps to hold the legs in place
Measure: 2" From leg, to end of table brace.
6. Aligning the Seat Cross brace, with the Leg Holes
The cross beam is placed outside the table brace #2
Use a Framing Square, to align the Cross beams,
so, you can drill the holes to match the legs.
Center the Cross Beam to hang off ~15" + 5/8ths
(doesn’t have to be exact, it may vary, just center it.
Place Framing Square between the cross brace, and the leg.
Target the "inside" hole first.
From the backside of the beam, notch a mark that aligns to the inside hole
*OPTION B: align the cross beam at the screw holes, and just drill through
The cross beam, as centered, but lifted up to the holes.
6. Cross Bracing 2x4's for table
You should have 2 left-over 2x4's
The 2x4 V bracing under the benches should fall inside the Cross Beams.
Cut 45d angles in the edges for the cross bracing.
You will need to set your circular saw to 45d
Circular Saw Note:
When cutting this angle use the guideline on the saw @ 45d Notch,
not the normal notch straight notch
*Or: eyeball the cut, to be flusher. (not necessary, but nice to have)
Use a level for Sideways, and Vertical on the legs and set the 2x4 beams
*Carefully drill to keep the table in LEVEL
7. Attach the Benches.
Align the bench along the outside edge of the cross beam.
(Furthest from the table edge)
Place the bench and screw it down.
>Sand the table
Weird, I just moved to Montana and I’m trying to find ways to refurbish this picnic table I got for free... and now I see this made in Montana picnic table how to. Very cool, thanks for the info!
Beautiful, might want to put spaces between 2x6 table top and seat. 1/8 to 1/4 for swelling caused by seasonal changes. Otherwise it may buckle.
This is perfect! I’ll be getting the supplies this weekend to build one!
I’ve watched several videos on how to assemble a picnic table and by far this is the best. It’s simple and is built upside down making it easy to construct. Look out for the carpenter who builds one in 10 minutes; it’s hilarious and explains how not to built one - it’s priceless.
Thank you I’m trying to find idea how to make money. This video help a lot.
Very nice video! I've begun making it with some 2x6's and I know it's going to end good!
Very good build, you are a very good builder
I see you wearing them osha aproved steal toed flip flops! Nice work btw.
I subscribed because of your Sandals
;) Who doesnt like woodworking in sandles!
Unsafe working in sandles, any shop teacher would say so. Good method video.
The one answer I don't see is how you move this thing once it's built without a forklift?
Thanks for the video. This was my first attempt at anything this large. I was able to get slightly out of kilter 2x6x16 lumber for the whole thing for $25 and used pipe clamps to pull everything straight. The most expensive item was the wood screws!
Love it! Going to build one for our backyard in Southern Idaho! :)
You make it look so easy and smooth great job
Damn. This guys rich. He must be a millionaire with all that wood
Video from 2018...the good ol days when wood was cheap!
I'm late to the party here, but this is a great video! We are definitely sharing it on our social media.
Emmy Braxtly
Thanks Emmy. Post the link where your sharing it;)
how far down do you measure from the top of the leg to the cross brace for the seat??? Or what should the height of the seat be to the ground??
Barry, you probably solved this already, but: Just measure up the leg 12.5" ~ and match the 25 Degree ? line. Essentially go up the leg, and duplicate that angle. I had the same problem. Its not made clear in the video. While making the legs, you can simply put the same line on the board - up 12.5". Make sure you measure from the bottom. If you measure from the bottom on each corner of the leg, 30", the angle will be the same. + You will find your hole line.
i came across the same problem and i’m glad he answered
@@ericfleming6363 Ditto! He doesn't give us that measurement in the video. Thanks!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
@@mk8530 Thank you so so much. You're a life saver. Plannin to build this bench tomorrow and i needed to know this.
As you are using 2x4 and 2x6 wood how can the bolts only be three and a half inch when the combined thickness of the legs and seat supports is 4 inches?
Can’t wait to get started
Turned out great and was super easy thank you!
Great video, thank you sir.
If I ever build my own table I will surely paint between the boards before assembly.
Nice design. I’m using redwood. It’s pricey but it’s beautiful and doesn’t need to be finished because it’s under roof in a Ramada. Also, it’s so nice to work with.
Nice table. Use torx screws T20 or 25. hardly ever strip one of those. Nice work!!!
Great job!! I see that some people are talking about the wood glue don’t they realize that it’s a option, either you do it or you don’t. Again great job in explaining the process !!
Thanks JC!
I have built this table as a gift. It comes out very, very nice. People are very impressed. However, it weighs a lot, and not easy to transport.
You will love the end result. This table can seat 8 people, as opposed to the usual 4 people.
Nice table...nice work... Great presentation...
Great video. What drill is that you’re using? Thanks for sharing
Thank you, and a few minor corrections:
You will need about 60 screws, one box usually holds ~ 50. I used T25 Torx : 2 1/2" Wood screws.
"The Carriage bolt line" - AKA "The seat line measurement" , is measured from the ground 12.5", essentially duplicating the bottom angle of the Leg. (I think that was 25 Degrees. The author explains it in comments below. "I measured from the part of the leg that will set on the ground and came up 12.5". Once I had that mark I used that to pivot on to make another 25 degree line." and : You should be able to measure up each side of the the board length and make your marks and this will automatically create your 25 degree angle." Basically, if you measure up from any leg, the angle will be correct.
Thank you! Was in the middle of this project when I noticed at the 15 minute mark he didn't explain that distance (editing error I believe? Looks like he said he was going on to the 2x4 cut but all of a sudden he's back to the legs)
Thank you!
Thank you! I kept on rewinding that part and was just about to wing it.
How far down the legs did you make the holes? Didn't see it in the video
thanks buddy,
You bet!
Where do you get your measurements to drill the 2" & 4" holes
Love this project!! How many inches off the ground did you drill the seat support holes on the legs??
I think it’s around 18” to 24” depending how high you high / low you want to sit
Just a quick tip but a little bit more of a space in the top to allow drainage
Great idea!
How tall did you make your benches? You did not explain your measurements for the bolt holes?
i love this video
I built this exact table wish I could show you pics of it.. The only issue I had when I used to scrap 2x4s for the support legs. I had to cut them down about 28 to 27 in. so when I cut the 45 degree angle on the ends it fit perfectly. They were too long to fit from the bottom of the table to support the leg.
Hey man. Did you just use 11 2x6 and 1 2x4?
If I wanted to take the table down to 7’ instead of 8’ due to space, can I still use the other measurements but make adjustments to the 2x4 supports under the table top or even remove the ones at 2.5” and just keep the 13.5” supports?
Absolutely!
Just finished the build. Staining and sealing it now. Damn man it’s a nice table! Thanks!! Wish I could show you the finished product!
Awesome! Sounds really cool. Send some photos!!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
Need to know measurements for holes you drilled on the legs? From the end your going to mount to table brace, end to the holes 2” &4” marked hole so we can mount it to table.
2"
I believe you forgot to tell us the measurement from bench to table top.
would it be best to stain before assembly? After all the cuts are made.
Definitely not a bad idea at all.
Niece... 9:15 finally changing bit head, TG! plz no more rolling clip, a direct switch is ok to.
VERY NICE VIDEO! LOL Just one thing. You did a beautiful job hiding the screw holes, then you drilled screws into the seats! omg. That's something I would have done. You should have screwed the bottom braces to the supports under the seats, that would have kept the seat in place just fine....even add some wood glue under the seat where it sits on the brace and BAM! No screw holes and you go to the top of the banana split!!
Good idea! Thanks for sharing.
Great video. Very well done, I just wish the audio was better
cool, thank you
What would be the measurements for the lower braces if you don't want benches? I have some great chairs that will work great for seating on this.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
How high up the leg do you drill the holes for the carriage bolts?
Found the answer in the comments.
How long were the support bracing?
Works great!
So you used 45 degree angles on all the support boards ?
How long are the 2by6s
How much you charge to make a picnic table?
I wonder if this is cheaper compared to already made? This is actually pretty cool..
Right now 8/25/2022 the lumber for the project is about 70 dollars if you buy number 2 prime grade kiln dried pine, hardware is about 25 dollars, and a tube of construction adhesive is about 10, for a total of about 105 at home depot. A pre-made table at home depot is 159 plus tax, so if you already have the tools you need, you would save about 60 bucks on each table to build it yourself.
@@DeanTX This is convenient to anyone that does have the tools.. & I don’t have .. 🤭
I just have a question. How far up on the legs do I drill the holes for the bench support? The video don't say
I have the same question
Love your videos man.
Thanks! Have a bunch more I am working on editing.
Thanks for posting your work
He said 12.5" from the ground up. Once he got that, he pivot 25 degrees to make a line..(This is for the table legs)
12.5 from the long end or short end
I am about to build and could use a supply list
Look in the description section.
Thank you. I didn’t know about the Description pull down... Great tutorial! Back to the lumber yard for one 2x6x8....
At 14:56 how did you determine that was the spot for the bolt holes?
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
How far up the table legs do you drill holes? You didn't give that measurements.
Awesome! Just bought all the lumber today to knock this out tomorrow.
QQ: What’s the height measurement on the carriage bolts?
Nvm I found it - 12.5” thanks!
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
If i used another type of wood like poplar would that work?
Yes. I just used pine to keep the cost down for everyone who tries it.
I'm still not clear where you put the bolts. I'm not a carpenter. Help
I prefer to cut the ends of the cross braces at a 45 degree angle so that people don't hit their knees.
fav on youtube
Good job brotha! Very detail vid. Since the legs will be touching the ground, do you recommend treated wood??
Treated wood isn't a bad idea. We will have this in pea gravel sitting on top of weed guard. Seems to work well for drainage. I also treated it with Linseed Oil as well. We will see how it handles up to the Montana Winters:)
Brick and wood aquasealed mine
@@montanamade1114 What were your measurements on the legs for the carriage bolts?
Just to be sure sir imma be doing this next weekend all I will need is 11 2x6's and 1 2x4...
Material You Will Need
-12 2X6X8 Pine Boards
-3 2X4X8 Pine Boards
-8 3-1/2" Carriage Bolts with Washers and Nuts
-Box of Wood Screws 2-1/2"
-Wood Glue
-Circular Saw
-Drill with Phillips Head Driver
-Pencil
-Speed Square or Framing Square
-Vise/Pipe Clamp
Got cha really appreciate that bro... sister been wanting one so imma build her one as a surprise...
You bet. Good Luck on it! Let me know if you have questions.
Yes sir I sure will...
I bought..13 boards 2' X 6" X 8' and 4 boards 2" X 4" X 8' just to make sure id..hace enough!
Did you really assemble that table with no gaps between the boards?
Wood swells when wet or humid. I doubt this table will last long.
Fine job man , thanks
How far up the table legs do you draw the carriage bolt
1/2 way
WOW! steel toed saddles.
very funny, i can not believe anybody ( handy) work with Sanddles...sorry but.
Hey Montana where can I send you some pics of the tables I made from using your help from this video??
That's a big ass square..
Nice vid! Do you have any pictures of the final result?
What is the height of the tables?
Why glue stuff like this with all the metal screws holding it together?
bravo
Why did you put two sets of wood on the back of the table and only screwed everything to one of them?
Thanks for the video it helps a lot
PRICE LIST GUESSTIMATION FOR THIS BUILD???? My coworker wants me to build him 4 !
you didn't use spacers for the top to reduce the swelling of the wood.? Also why are you not drilling pilot holes to preventing the wood from splitting?
Man one thing I never can do is use Phillip head screws I always strip them Im used to to star bit nice work though
A torque bit and some deck screws are always awesome!
@@montanamade1114 Nit-pick here: Torx, not torque (which is a product of force and leverage distance)
@@g.m.forsythe9626 If you're going to nit-pick be sure you are right. Torx is a brand name. Torque is the technique.
@@glenncalzada1707 Thanks for the education, and no thanks for the sarcasm.
Unfortunately your statement is not supported by factual evidence. If you Google "torque screw" you will not find support for your statement. Wikpedia has the following: "Torx (pronounced /tɔːrks/), developed in 1967[1] by Camcar Textron,[2] is a trademarked type of screw drive characterized by a 6-point star-shaped pattern. A popular generic name for the drive is star, as in star screwdriver or star bits. The official generic name, standardized by the International Organization for Standardization as ISO 10664, is hexalobular internal."
Sorry to have to nit-pick your "correction," but it's simply not correct.
@@g.m.forsythe9626 thanks for the correction. I was thinking nuts and bolts. You ade talking screws. Auto mechanics use torque wrenches to loosen and tighten nuts to a specific degree of lbs.. Apple and oranges evidently. Sorry if you found sarcasm in my earlier remark. It was unintended.
Do u use this treated wood?
I didnt use treated wood on this one. I ended up staining and sealing it. You can certainly use treated though!
@@montanamade1114 thanks so much. Got to make two by the summer and I was just wondering.
Very cool! Good luck on them!!
Why is your drill set on hammer mode?
Bill Craig lol it's an impact
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
OSHA FLIP FLOPS? Where do I get them?
;) Came with the hardhat as a set.
Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299
is a really good job, but you said it will cost a total of 120 $ i have been to home depot and only 2x6x8 one costs 12.52 $, anyone tips on where can i buy cheap?
Right! Wood prices are through the roof right now due to the pandemic and shipping/distributing being all wacked out.
@@MechanicLife ah OK thx :)